Printing Problem: "Access denied, unable to connect"

Although I was able to print the test page successfully, I could print nothing else from my Vista machine (actually a MacBook running Vista under Boot Camp) to the printer attached to my Airport Extreme. Apple Nugget supplied the following solution for the same problem under XP and it worked for me under Vista:
1. Make sure the printer is recognized by the base station.
2. Select 'Add a new printer' in Windows
3. Select 'Local Printer' in the dialog box (auto detect and install should be off), click next.
4. Choose 'Create a new port' and "Standard TCP/IP Port'. Click next.
5. For the printer IP address, enter the address of the base station ie. 10.0.1.1. The port name will be filled automatically. Click next.
6. For the device type, choose your printer from the list and follow the rest of the prompts to install and configure the driver.
As I said, these steps worked perfectly for Vista, too. Note the counterintuitive instruction to create a local printer for what is really a network printed plugged into the Airport Extreme. I don't care; it worked?

You did not say what operating system you are using - I guessed XP. Check this out.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

How do i fix the "Unable to install Apple Mobile Device USB Driver" problem access denied

My new iphone 5c will not work with my laptop. The apple mobile usb driver will not install. 'Access denied' is the final message in the diaolgue box of the device load error. The device is recognized but there is the yellow triangle with the exclamation point on it indicating an error installing. I've removed itunes and its components as directed step by step ..... twice..... I've disabled antivirus, firewalls, and even created a second admin profile in hopes that it would load the driver. Nothing is working. The apple person was supposed to call me back after we were on the phone 90 minutes. Well.... I guess she did not. Help!!! I would love to sync my phone. Any ideas?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Remote access VPN-unable to connect inside-URGENT

Hi,
I have configured Remote access VPN in cisco ASA 5520.Whenever I am trying to connect from outside it's connecting fine.It aslo getting IP from pool but prob is i am unable to connect/ping inside nw.
Pls help me...how to resolve this issue.

I had the same problem on an IOS router (871). My solution was one of two things. I downloaded the most up-to-date version of the VPN client (5.0.02.90) as opposed to the version I had or it was a software firewall (Norton 360). I have two different computers. One works just fine...the other connects but no traffic passes through. Here is what I have:
Computer 1 (working)- VPN Client v5.0.02.0090 and Network Associates Enterprise VirusScan.
Computer 2 (not working) - VPN Client v5.0.00.0340 and Norton 360.
I highly doubt it is the VPN Client, but sometimes you never know. Check your software firewall and try disabling it. Let me know how this works.

Hyper-V 2012 R2 roles, access denied, failed to connect to service, AzMan....

Hi All,
I have followed dozens of tutorials to set up roles for Hyper-V, but I keep coming up short. I have no problem managing the five domain-joined 2012 R2 Core Hyper-V servers we have remotely from my Windows 8.1 PC, but I have a lab box I would like to grant
specific permissions to some Help Desk users on.
The key tutorial I have followed is from John Howard (http://blogs.technet.com/b/jhoward/archive/2008/04/01/part-4-domain-joined-environment-hyper-v-remote-management-you-do-not-have-the-requested-permission-to-complete-this-task-contact-the-administrator-of-the-authorization-policy-for-the-computer-computername.aspx),
but it still does not allow a non-admin account to use Hyper-V Manager remotely. Without his tutorial, I get access denied with my "TestUser" account. After following his steps, Hyper-V Manager appears to connect to the server, but says "The
Virtual Machine Management service is not available." Even using his HVRemote with the /show flag, everything shows as PASSED.
Digging deeper, I see dozens of failed audit Event Viewer logs saying "TestUser" is requesting READ to Service Control Manager. That sent me searching, and I found
http://arnoutboer.nl/weblog/?p=300 and http://msdn.microsoft.com/en-us/library/windows/desktop/aa374928(v=vs.85).aspx.
After granting "AU" (Authenticated Users) every permission resembling "read", Hyper-V Manager now shows "There are no virtual machines to show" (or something along those lines); even though I know there are about 30 VMs on this
host. I try to create a new VM (out of curiosity, and now that those options actually appear), and I get permission denied immediately after the create VM wizard pops up.
Why is this such a convoluted process? I would appreciate any help creating Roles for Hyper-V 2012.
Thank you in advance!

Hi Eric (cool name BTW!)
Putting them in Hyper-V Administrators is definitely not an option.
I absolutely believe Microsoft would do something to push you into buying their software; just as we had to purchase Windows 8.1 Pro to remotely manage our 2012 R2 servers. However, as far as I am seeing, AzMan is still in 2012 R2. Whether it works or not
is another story, but AzMan.msc is still there and I can run it on any of our 2012 R2 GUI installs.
Actually just found this:
http://technet.microsoft.com/en-us/library/dn303411.aspx. According to that, it has not yet been removed, but it has been deprecated. From what I am seeing, the Hyper-V portion of it is definitely broken.
I will look into the remote endpoints solution you mentioned. Thank you for the suggestion. I just recently took the plunge into learning C++, so maybe a Hyper-V manager of sorts will be an app to
attempt to write, haha.
Eric Christensen

My husband keeps getting "problem loading page" "unable to connect" what can he do?

he can't get on to firefox .He keeps getting problem loading page and unable to connect.It says to check for firewall and proxy.It also says make sure firefox is able to access the web.Please help.

"This site makes use of a SHA-1 Certificate; it's recommended you use certificates with signature algorithms that use hash functions stronger than SHA-1.[Learn More]"
That was in the error console when I loaded it in Firefox 38. Is there a Firewall or an Antivirus that blocks the sites with these type of certs? FIrefox is beginning to phase these out. [https://blog.mozilla.org/security/2014/09/23/phasing-out-certificates-with-sha-1-based-signature-algorithms/]
What else, I can only imagine that there might be something going on with the internet connection on the computer if other sites are not working either. However since it is just this site try these steps:
*[[Websites look wrong or appear differently than they should]]
Did this help?

Sharepoint 2013 adding ECT fails with "Access Denied by Business Connectivity Service"

Using SharePoint Designer 2013 I am attempting to setup an External Content Type to a SQL DB. I have setup the SQL database with a valid login that was also used to setup an account with the Secure Store Service. I am running SharePoint 2013 designer and
have opened my site with administrative credentials. No matter what, I continue to get the "access denied" message when I try to add this SQL database to my ECT section in SPD. All users have access to invoke the BCS app.
I have deleted and recreated the BCS service application and it is running with farm credentials and temporarily I added the farm account to the local admin account....and again verified that all users have rights to run BCS...
In all other aspects my SharePoint sites are working, I can modify and add via SPD and publish...etc...but I cannot add a connection to an external SQL server. I have also verified through Excel that I can connect to my SQL DB with the same credentials that
I am trying in SharePoint and everything works.
Most of the posts I see in this area relate to permissions or access problems AFTER the ECT connection is created. My problem is I can't even get a connection created.

Here are the error logs that are generated when I try to connect....maybe this will help someone tell me where to correct the issue.....(I removed the actual domain names) but my account was listed which is an admin on the sharepoint system and domain.
06/25/2013 16:48:00.24 w3wp.exe (0x1908) 0x0EE4 Business Connectivity Services Business Data 9f4c Unexpected 'Business Data Connectivity Service' BdcServiceApplication logging server side AccessDeniedException before marshalling
and rethrowing on client side: Access Denied for User '0#.w|"domain\my account', which may be an impersonation by 'Domain\"sharepoint admin account"'. Securable IMetadataCatalog with Name 'ApplicationRegistry' denied access. Stack Trace:
at Microsoft.SharePoint.BusinessData.SharedService.ModelAccessor.Create(MetadataObjectStruct rawValues, MetadataObjectStruct applicationRegistryStruct, DbSessionWrapper dbSessionWrapper) at Microsoft.SharePoint.BusinessData.SharedService.BdcServiceApplication.Execute[T](String
operationName, UInt32 maxRunningTime, ExecuteDelegate`1 operation) 97fe289c-5245-e040-0f76-59614537398e
06/25/2013 16:48:00.24 w3wp.exe (0x1908) 0x0EE4 Business Connectivity Services Business Data g0kc High Access Denied for User '0#.w|domain\my user account', which may be an impersonation by 'Domain\"sharepoint admin account"'.
Securable IMetadataCatalog with Name 'ApplicationRegistry' has ACL that contains: 97fe289c-5245-e040-0f76-59614537398e

All in One D145 - Error Message when changing Print Director - Access denied

When I print out a document or a fax, after each page of print I get a blank page followed by the next page of the print or the fax. I tried changing the Print Director but I get a message "access denied". Has anyone experienced this and resolved it?

Hello lightweight,
Welcome to the HP Support Forums!
Sorry to hear about the software issues you have been having with the Photosmart C410a on Windows 7. I would like to see if I can help.
Below are the first steps I would like you to try;
Click the start menu and then type %temp%
Look for, and open the folder starting with 7z (Example: 7zS0007)
Open folder Util
Open folder CCC
Run the uninstall_ L4.bat for non-HP computers. For HP computers, run the Uninstall_L3.bat
When the uninstall has completed restart the computer
Run Disk cleanup from Accessories> System Tools and check all boxes.
Download and install the latest version of Adobe flash player: Adobe Flash Player
Download the full feature software and drivers: HP Photosmart Full Feature Software and Drivers (if you need to download the software again)
Run the download to reinstall the printer
Let me know if you still having the issues.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Access denied error on connecting to office365

I'm trying to connect to Office365 with Powershell.
$username = "[email protected]"
$password = "password"
$secure_password = $password | ConvertTo-SecureString -AsPlainText -Force
$credencial = New-Object System.Management.Automation.PSCredential ($username, $secure_password)
$session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri "https://ps.outlook.com/powershell/" -Credential $credencial -Authentication Basic -AllowRedirection -ErrorAction Stop -WarningAction SilentlyContinue
Import-PSSession $session -AllowClobber | Out-Null
Problem is that on Powershell console on local PC and on server it works fine without any errors, but when I'm trying to run this with PHP:
<?php
$command = 'powershell -File "'.dirname(__DIR__).'\\ps\\test.ps1"';
exec($command, $output);
print_r($output);
?>
I'm getting error, that "Access is denied":
Array
[0] => New-PSSession : [pod51047psh.outlook.com] Connecting to remote server pod51047p
[1] => sh.outlook.com failed with the following error message : Access is denied. For
[2] => more information, see the about_Remote_Troubleshooting Help topic.
[3] => At C:\inetpub\Distribution list\ps\test.ps1:6 char:12
[4] => + $session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri
[5] => "h ...
[6] => + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[7] => ~~~
[8] => + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:Re
[9] => moteRunspace) [New-PSSession], PSRemotingTransportException
[10] => + FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
Any suggestions what I'm doing wrong? Are there other ways to run this Powershell script with PHP?

Hello Ludek,
I had to take ownership and then change persmissions to full. The problem did not go away however. As I noticed that the register key mentioned did not contain any subkeys I tried to remove it. This again failed because of persmission denied error. Funnily some subkeys suddenly showed up. I took ownership, changed permissions and tried again. Lo and behold the subkeys I tried to delete (and in which no subkeys were visible) suddenly showed more subkeys. At this point I stopped fearing that I was damaging the client's computer. The subkeys were related to the RAS server. Does that say anyting to you?
André

Problem loading page, unable to connect

I am trying to load the page, www.goiam.org. It wont work in FIREFOX or INTERNET EXPLORER. I have tried all possibilities. It loads on my phone and my IPAD. Not sure what can be done. History is clear. Cookies Clear. I need to get on this web site.

"This site makes use of a SHA-1 Certificate; it's recommended you use certificates with signature algorithms that use hash functions stronger than SHA-1.[Learn More]"
That was in the error console when I loaded it in Firefox 38. Is there a Firewall or an Antivirus that blocks the sites with these type of certs? FIrefox is beginning to phase these out. [https://blog.mozilla.org/security/2014/09/23/phasing-out-certificates-with-sha-1-based-signature-algorithms/]
What else, I can only imagine that there might be something going on with the internet connection on the computer if other sites are not working either. However since it is just this site try these steps:
*[[Websites look wrong or appear differently than they should]]
Did this help?

2008 R2 printer server, cannot connect to printer, access denied, Windows 7 OS only

Deployed new Windows 2008 R2 domain controller, added print and document controll. Added several network printers on R2 server. We currently have mostly Vista biz clients but half a dozen W7Pro clients also. The Vista clients connect to these new network
printers, no problem but none of the W7 clients will connect. I select the printer from the drop down directory list and select to load the drivers, the system starts loading drivers and then right before it finishes it stops with error message, "Windows cannot
connect to the printer. Access denied. Again, this happens only with the W7 clients on our domain, Vista works fine.

By default, the security settings for Windows 7 and Server 2008 R2 allow users who are not members of the local
Administrators group to install only trustworthy printer drivers, such as those provided with Windows or in digitally signed printer-driver packages. You may want to install printer-driver packages on the print server
or in the clients. More details can be found this page: Cannot
connect to printer, Access denied -
http://www.chicagotech.net/server/print3.htm
Bob Lin, MS-MVP Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.howtonetworking.com

Hp officejet pro 8610 - Unable to connect to server

Hello. I bought a printer hp officejet pro 8610. I have a home worth router Zyxel Keenetik. My laptop and smartphone access to the Internet via a router (to access the Internet proxy server is not required). I set up the printer on a wireless connection. Configured to print from a laptop to a local network - this works fine. And now trying to set up ePrint, but faced with the problem - I can not run a web-service on the printer. The message - "Unable to connect to server". I downloaded from HP new version of firmware for the printer and installed it, but the problem remained.

Hi,
Try setting a manual public DNS as following and check if that may help:
Open the Network tab within the printer's web page.
Select IPv4 within the Wireless section.
Select a Manual IP, then click the Suggest an IP button and allow it a few moments.
Once the fields being updated, change the DNS section as following:
Primary DNS: 8.8.8.8
Secondary DNS: 8.8.4.4.
Apply and save the changes, then try enableing Web Services again and check for any difference.
Please let me know if that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Unable to connect to Deskjet 3545 via Wireless Direct from Windows 8.1 laptop (Lenovo Thinkpad E530)

Hi, It's a newly bought printer. I am unable to connect to the printer via Wireless Direct from Windows 8.1 64bit laptop. I have enabled the Wireless Direct with security on the Printer. Connected to the Printer SSID from my laptop wifi. Created the new printer from Driver software. It discovers the printer with it's name,IP etc; Upon selecting the printer and click on 'Next' button on the screen, results in a 5 min search process and finally displays that it could not connect. I have tried pinging the printer and it's able to pingf the IP of the printer successfully. I have even tried disabling the Norton antivirus, but result is the same. regards,sathwik

E71- unable to connect IMAP outgoing server

HI,
After I re-installed software in my E71 I have faced problem that I unable to connect IMAP outgoing server it was earlier fine Even Incoming mails are no problem currently.
please fix this issue
regards
nizar
MODERATOR'S NOTE:
We would like to inform you that we have edited your post and your personal details (e.g. full name, mobile number, email address) was removed as it is unwise to publish personal details on forums like this.
We kindly ask you not to share personal information on this forum.

not enough to go on.
what country are you in?
what carrier do you use?
what do you currently have for your outbound server and port?

After Firefox updated last night, I am no longer able to use it. "Unable to connect" I have added it back through the firewall, nothing works. Help!

Starting last night, after an update, I am no longer able to use Firefox.
"Problem loading page"
"Unable to connect"
Unable to connect"
Firefox can't establish a connection to the server at.....
I have tried various things, even uninstalled and re-installed, took it out of the firewall, and added it back in. But nothing is working.
Please help!
Thank You
Mara

Hello Mara, see if the next is helpful : [https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can Firefox can't load websites but other browsers can]
also, try to boot the computer in [http://windows.microsoft.com/en-hk/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows Safe mode with network support] (press F8 on the boot screen) and check firefox again.
(If works in Windows Safe mode then probably you have problem with other software, like security software or maybe a system driver, that is running on your computer).
thank you

Network Load Balancing - "access denied" when loading configuration information from host2

We have 2 Windows 2012 R2 servers, both are running on workgroup.
We set up NLB cluster. When we open NLB Manager on the server2, then message shows "loading configuration information. Access denied. Error connecting to server1".
There is no issue doing this on server1, NLB Manager is able to connect to both servers. We login using default administrator account, both account name and password are the same for 2 servers.
When we check security event log on server1, there is this strange Audit Failure log using account "test_nlb" from server2 which related to "Access denied" error. Please let us know how to resolve this. Thanks in advance.
      Event ID: 4776
      The computer attempted to validate the credentials for an account.
      Authentication Package:
MICROSOFT_AUTHENTICATION_PACKAGE_V1_0
      Logon Account:
test_nlb
      Source Workstation:
WPAAP2
      Error Code:
0xc0000064
      An account failed to log on.
Event ID: 4625
Subject:
    Security ID:
S-1-0-0
    Account Name:
    Account Domain:
    Logon ID:
0x0
Logon Type:
3
Account For Which Logon Failed:
    Security ID:
S-1-0-0
    Account Name:
test_nlb
   Account Domain:
WPAAP2
Failure Information:
    Failure Reason:
Unknown user name or bad password.
    Status:
0xc000006d
    Sub Status:
0xc0000064
Process Information:
    Caller Process ID:
0x0
    Caller Process Name:
Network Information:
    Workstation Name:
WPAAP2
    Source Network Address:
192.168.70.45
    Source Port:
55136
Detailed Authentication Information:
    Logon Process:
NtLmSsp
    Authentication Package:
NTLM
    Transited Services:
    Package Name (NTLM only):
    Key Length:
0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
    - Transited services indicate which intermediate services have participated in this logon request.
    - Package name indicates which sub-protocol was used among the NTLM protocols.
    - Key length indicates the length of the generated session key. This will be 0 if no session key was requested.

Hi Zhong Gang,
When you are using Network Load Balancing (NLB) Manager, you must be a member of the Administrators group on the host that you are configuring, or you must have been delegated
the appropriate authority. If you are configuring a cluster or host by running NLB Manager from a computer that is not part of the cluster, you do not have to be a member of the Administrators group on that computer. Please disable your nodes firewall and
try again.
The related KB:
Add a Host to the Network Load Balancing Cluster
http://technet.microsoft.com/en-us/library/cc753744.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Printing Problem: "Access denied, unable to connect"

Similar Messages

Maybe you are looking for