Printing problem after acrobat upgrade

Hi,
I am running Mac OSX 10.8.5 and have recently updated my Acrobat to 11.0.04. Since doing this I am experiencing problems printing my pdf files to my desktop printer, which is a Xerox phaser 7500 duplex printer. When sending the file across it just crashes out the printer which reboots itself but doesn't print the file out. I had this problem previously when Acrobat issued an update and it ended up being a problem with the Xerox driver compatability, so I am sure it will be the same issue. The latest driver I can see on the Xerox site is this one - XeroxPrintDriver.2.112.0 but it still has the same problem. Does anyone have a later driver or any ideas please? A later driver supplied by Xerox fixed the issue.
Regards Kevin

Hi kevpobrien,
Please try updating Acrobat to 11.0.5 and check.

Similar Messages

Ricoh printer problems after Yosemite upgrade

My Mac is on a small business server that also included a Ricoh MP C5501 printer. It worked fine before the Yosemite upgrade but after that upgrade plus use of the Ricoh Yosemite driver I can't get anything to print. Someone says that it is a Postscript problem but I don't know to fix that. Is there a proven process to address this issue?

Hi there DirectorCHA,
I would recommend taking a look at the troubleshooting steps for printer issues found in the article below.
Troubleshooting printer issues in OS X
-Griff W.

Printing Problems after Yosemite upgrade

After upgrading to Yosemite, my Kodak printer only prints a blank page with an error message that a firewall could be blocking. Kodak is allowed on my firewall and I even disabled the firewall, uninstalled and reinstalled, and still the same problem. Please help, thank you

Re: My Kodak printer doesn't work with Yosemite
may help, but Kodak needs to update their drivers.

Report Printing problem after 11g2 Upgrade

Hi,
We have just upgraded our test platform from 11g1 to 11g2 running on Windows and now when trying to access printed reports we are ORA-03113: end-of-file on communication channel errors, have we missed something with changes to the required ACL's for printing in 11g2?
David

Hi,
ORA-03113 issues are primarily caused by
* Network Issues or Problems
* Forceful Disconnection of a Server Session
* Oracle Database Crass
* Oracle Client or TNS layer inability to handle the connections
Follow:
http://www.dba-oracle.com/m_ora_03113_end_of_file_on_communications_channel.htm
http://www.dba-oracle.com/t_replication_queue_stopping_ora_03113_end_of_file.htm
Regards,
Kartik Patel
http://patelkartik.blogspot.com/
http://apex.oracle.com/pls/apex/f?p=9904351712:1

PS CS6 having printer problems after Yosemite upgrade.

I've seen a lot of people having problems with this, and zero answers from Adobe. I'm running Photoshop on a 2012 iMac. I don't know what exactly triggers the problem, but it occurs when I'm changing the print settings for a document. All of a sudden I get this message:
There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
And nothing, nothing will enable me to print from Photoshop ever again, except re-installing the whole program. This is a pain, of course, and I lose all my settings.
There seems to be an incompatibility between PS and older macs running Yosemite. I have not had the problem with my 2014 MacBook Pro--it prints fine from PS with the same printer. (A CanonMG5320, FWIW, but it seems to be happening to people across a range of printers.) I spent a lot of time in a fruitless text chat with someone at Adobe who disappeared after a bit and left me hanging.
Whose responsibility is this? Adobe's or Apple's?
I just wish someone would fix it.

Probably either Apple's or Canon's. There have been a lot of issues with he new Yosemite. First off, are you running the latest version of Yosemite (10.10.3)? Have you tried Re-installing the printer's drivers?
Benjamin

Printer Problems after upgrade to Lion

Does anyone have this printer problem after upgrading to Lion. A perfectly functioning laser printer on my network prior to upgrade - now the network seems to drop the printer and show it as "not connected" approximately every 30 minutes ???

Hi Paul,
Been away and just got back to this issue.
Thanks for the info. The OKI site has now posted a list of all their Printers and their relative drivers for compatibility with "Lion". My machine is due an updated driver from OKI in Mid Decmber according to this notice.
Meanwhile, as the printer does work with some tweaking I guess I will use the work around until the new driver is available. My legacy printers that i use for special jobs both work and as I do not have the disks for their drivers I am loathe to re-set the printer system at this time.
Thanks for your assistance in this issue.
Regards,
Mike, Rustington.

IPhoto 08 contact print problems - after 5 images. prints pt a screenshot

iPhoto 08 contact print problems - after 5 images. prints pt a screenshot

Okay - So, I teach photography and have my students print contact sheets from iPhoto version 08. I have one student (out of forty) having the following problem (I have removed preferences, reinstalled iPhoto, used the iPhoto updater for 7.1.5, reloading the printer driver and upgrading the system software to 10.6.8 {I teach in a high school, so no funds for newer software})
The problem is isolated to one student - the others on the same machine do NOT have the same problem. When this student selects more than 5 images, the resulting output looks as if he has taken a screen shot - the palettes on the left of the frame show and the titles he has inserted (using Batch Change) are moved on to the pictures.
At this point, I am going to let him screenshot his submissions, just wondering if anyone else has had this problem.
Thanks!
Sandy Snyder

DataSource problems after BW upgrade

DataSource problems after BW upgrade
Upgrade from
SAP NetWeaver 2004s: SAP_BW 700 0012 SAPKW70012
to
SAP EHP 1 for SAP NetWeaver 7.0: SAP_BW 701 0007 SAPKW70107
BW system: PI_BASIS 7.01 SP 6
ECC/source system: PI_BASIS 2005_1_700 SP 11
Problem exists throughout, both with generic and standard DataSources.
Here is one specific example:
Generic DataSource ZXXXXXXXX
InfoPackage "ZXXXXXXXX(ZXXXXXXXX)" does not run. Error:
DataSource ZXXXXXXXX(SOURCESYS) must be activated
Message no. RSDS179
Then followed these steps:
1. Replicate Metadata from source system
2. Report RSDS_DATASOURCE_ACTIVATE_ALL from SE38 for source system SOURCESYS and DataSource ZXXXXXXXX
Errors returned:
Inconsistent user object ZXXXXXXXX SOURCESYS for PSA /BIC/B000XXXX
Error saving DataSource ZXXXXXXXX SOURCESYS
DataSource ZXXXXXXXX (SOURCESYS) could not be activated
When I try to choose "Manage" from the context menu for the DataSource, I see an error:
Invalid DataStore object name /BIC/B000XXXX: Reason: No valid entry in table RSTS
Message no. RSM1294
The following notes have not helped:
https://service.sap.com/sap/support/notes/1377274
https://service.sap.com/sap/support/notes/1383711
https://service.sap.com/sap/support/notes/1489064
https://service.sap.com/sap/support/notes/1056060
And no other SDN threads seem to give fruitful suggestions.
Any ideas?

Hi,
Just to help the folks out here.
In my case,
Inspite of going through several valid NOTES & program, my issue didnt resolve (you reply was pretty accurate - but dint help me :-)).
I have resolved the issue by adjusting the PSA table for the same.
Procedure:
Take the psa name --> go to table rstsods --> find the ODSNAME_TECH name for the relevant psa --> se38 t.code --> enter ODSNAME_TECH and click on 'adjust & activate database table' (make sure you have selected 'save data' radio button.
Just in case anyone who come across this problem, can do the above steps.
Regards,
Dubbu.

I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

I was going to suggest - Settings>General>Reset>Reset all settings, but if you are restoring to factory settings, that should restore the settings back to factory defaults. But if you are restoring from a backup, after restoring to factory settings, try resetting all of the settings and see if that fixes it.
It might be something in your backup.

I have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

i have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

Check that your computer is compatible with Mountain Lion.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
MacBook Air (Late 2008 or newer) model number 2,1 or higher
Mac mini (Early 2009 or newer) model number 3,1 or higher
Mac Pro (Early 2008 or newer) model number 3,1 or higher
Xserve (Early 2009) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again. You can make a bootable DVD/USB stick to install using this free program.
Bootable Drive DVD or USB Flash Drive – Lion Diskmaker
Our 2 computers haven't experienced any significant problems, even though others have. I find it much better than 10.7 Lion, which I used for a week before reverting to 10.6.8
Mavericks is supposed to be released this fall, so you may want to wait.

Printing Problems after Reader 10 install

Recently deployed Reader 10 to about 300 workstations using Group Policy. Several machines are no longer able to print to some of the network printers. These printers are HP printers using the Universal Print Driver. When trying to print we get an error and the Adobe Reader application crashes. It will however print to other network printers that are using an older device specific driver, printing to the same print device. Have downloaded the latest HP driver, but it has not helped the situation. The printing worked fine with Reader 8 and Reader 9.   Anyone with an Idea?

Sorry only know Windows: Edit (menu)>Preferences>General>Application Startup>Enable Protected Mode at startup.
Wayne Capra
Date: Wed, 26 Oct 2011 10:37:59 -0600
From: [email protected]
To: [email protected]
Subject: Printing Problems after Reader 10 install
    Re: Printing Problems after Reader 10 install
    created by Al1iOop in Adobe Reader - View the full discussion
I am using a Mac 10.6 and cannot find the "Enable protected mode at startup" in General or any other options. Does anyone have an answer for Macs? Thanks.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3991540#3991540
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3991540#3991540. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Printer problem after OS X 10.4.6 upgrade

After the upgrade, my Brother HL-5140 series laser printer does not work any more. Print jobs go into the Printer Queue, but Status shows up as "-" and it says "No job printing".
The printer is connected to the Mac directly via USB port.
Any suggestions as to fix the problem? Thanks a lot!
Dual 2 GHz PowerPC G5 Mac OS X (10.4.6)

A simple re-boot took care of the problem.

Printer problem after upgrade to OSX Mavericks

Help!! My Canon MX310 printer no longer works after I upgraded to OSX Mavericks. Does anyone else out there have the same problem or point me to a potential solution? Thanks

First and probably the most important is go up to your Black Apple uuper left and do the Software Update. Double check that your plugged in to the USB port on your Mac. Restart the Mac and you should be good to go. Iwould also go to Canons web site and make sure there are any New Drivers for Mavericks.

Acrobat 9 pro 9.4.5-printing problem after 6/8/2011update? 35mg pdf now creates 922mg print file

sent 35 mg pdf to printer sometime after 6/8/2011. file took long time to print, when I opened printer dialog box, it showed the file was 922 mg. Don't know if it was the update, but had no problem printing the same file before the update. Have windows xp pro. Another person in my office having same problem. Any ideas?

Having the exact same issues hear. Haven't been able to find a fix for it anywhere. It has the be the last update. Going to check if I can roll back to the previous update.

Printer problems after upgrading. My kodak esp 5250 says it has the printer head jammed. Reloading the software let it work once. Obviously an interaction problem with Lion. Any ideas?

Printer problem. Since installing Lion my kodak esp5250 all in one says the printer head is jammed. It isn't. Reinstalled software and it worked once but still gives printer head jammed message. Any ideas?

Only the obvious one: do you have the latest driver, and does that cope with Lion? Kodak's stated requirements include this, which is slightly suspect. Obviously an interaction problem with Kodak? Try exploring whatever help Kodak have.
System Requirements
Operating System Compatibility
MAC OS X 10.6.x, MAC OS X 10.5.x, MAC OSX 10.4.8 or higher required
Processor Speed
PowerPC G4, 1.2 GHz

Printing problem after acrobat upgrade

Similar Messages

Maybe you are looking for