Printing problem for elements 10 in windows 8

I just bought a new computer with windows 8..My old computer was a windows XP. I reinstalled the disc .Everything works well until I wanted to PRINT..Completely different, can not change paper type, paper size, no print management etc.Is there someting I have to download to get it to work as it did on windows XP???
Thank You

The print dialog of PSE file->Print has all the settings you talked about.
Paper type and size are on main dialog box on right hand side while color mgmt you can get via clicking on More Options.

Similar Messages

  • Printing problem for elements 10

    I just bought a new computer with windows 8..My old computer was windows XP..I insteed  my Elements 10 in windows 8.Every thing works fine except the printing process.Can not change paper size. paper type color management etc..Worked fine in XP.
    Is there any special download or any solutions???
    Thanks

    Can you please try updating the printer drivers for windows 8?
    As a workaround you can change settings from printer preferences OS dialog box.

  • Need to download printer driver for 3510 with windows 10

    I need to download printer driver for 3510 with Windows 10

    Here is the link to the Deskjet 3510 drivers.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Printing Problems with Elements 8.0 and EXIF time data

    I've been using Premiere Elements 8.0 in Windows XP Professional for a couple of years with no problems. I shoot mostly in JPEG. I've always imported my images using a card reader (the same one). About a year ago suddenly I ran into printing issues. When I imported my images and tried to print them Elements crashed just at the point where it should begin the actual printing.  By chance I discovered that if I adjusted the time EXIF on the images in Elements by either hours or days, back or forward and adjusted them back to the original time/date the problem disappeared. If I had shot in RAW and edited these images there were no problems with the resultant JPEG.
    I noted the discussions about Elements changing the time in the EXIF and checked for this but this hadn't happened. The EXIF in camera and in Elements were the same. I also checked this against the time settigs of the camera and they were the same. I shoot with a Nikon D300.
    I backed up my images and did a complete re-format of my computer so that it was back to its ex-factory settings, re-installed Elements, restored my catalog from the backup and the problem still arose. I'm reluctant to upgrade to Elements 10 until I (hopefully) I find out  if (a) anyone else has the same problem; and (b) if anyone who had it has fixed it.
    Any ideas would be very welcome.

    Miceal,
    I am confused. Do you mean Photoshop Elements? Premiere Elements does not have a Print function. On can Export/Share, but not Print. For Photoshop Elements, you will want the PSE Forum.
    Good luck,
    Hunt

  • Printing Problems with Elements 11

    I have just started with Elements 11. At first it printed ok. but when I tried to set it up with Elements to control the printer ( Epson SX400 ) I keep getting a message saying that ICC Profile is invalid, and the program will not let me print at all. My computer O/S is Windows 7, 64 bit.  the Printer driver is one supplied by Epson EU to run the O/S.
    I have tried returning to Printer controls settings, this has not worked. I have tried to print on a different printer (Brother HL-2250DN Laser Printer) this will not print either.
    I have tried to print on my old Serif PhotoPlus program this is OK. So the problem is in my settings for Elements 11,
    Do I Need to Reinstall the programme
    Andy H

    I would explain you the steps you need to follow if you are giving control to Photoshop Elements to manages color.
    Step 1- Select your printer and then Click More Options at the bottom left of the Print window.
    Step 2- No click on Color Management tab.
    Step 3- Now from "Color Handling" drop down select Photoshop Elements Manages color. As you select this option "Printer Profile" drop down will become enable.
    Step 4- If Image Space is sRGB then select sRGB profile from Printer Profile drop down else select Adobe RGB.
    Step 5- Click On Printer Preferences button. It will open your printer's preferences dialog.
    step 6- Now click on "Main" tab and then click Advanced button.
    step 7- Now under "Color Management" section please select No Color Management here.
    step 8- Click OK and come back to main Print dialog of Photoshop Elements.  Now click Print.
    Note -If you choose Photoshop Elements manages color, it is very important that you disable color management in your printer driver.Letting the application and the printer driver simultaneously manage colors during printing results in unpredictable color.
    Try with above written steps I hope it would help.
    Cheers !!!

  • Printing problem for SAP Script

    Dear Friends,
    I am facing strange problem for SAP Script. In the billing document output the sold to party and ship to party address are displaying. When user print the billing document on laser printer it print the Country for Sold to and Ship to. But when it print the same billing document on normal printer (other than laser) the Sold to country not printing.
    The print preview of billing document in SAP  correctly display country for Sold-to and Ship-to.
    I have recently make changes in the SAP Script form (Address window) to display country for Ship-to which was never displayed before. I have added FROMCOUNTRY option after COUNTRY in address window. COUNTRY will be Ship-to and FROMCOUNTRY will be VBDKR-SLAND.
    Can any one help me to solve this problem.
    Regards
    Nilesh Shete

    Used custom address print option instead of using ADDRESS

  • Computer Specifications for Elements and Windows 8.1

    What are the recommended computer specifications to run Elements on Windows 8.1?
    thanks,
    Warner

    Yes - I got around that problem by loadings a Windows 8.1 Driver update from another Lenovo Thinkpad (forget which one).  So that problems now solved, but the Realtek Audio driver remains a problem.
    It's a shame, otherwise the Laptop is great, just these driver issues...

  • Printing problems for color

    hi there
    I have HP photsmart plus printer scan copy, compatible with osx 10.9.3 maverick, I can print and copy in black but not in color ?
    I have done a check with the printer, cleaned the cartridges and its good, but no printing in color
    When I print I get a new window and I cannot find an option for printing in B W or color
    going nuts lol  anyone knows it would help  thanks

    After further testing I've found out what the reason is for the black rending in CS4 Illustrator.
    When rending DSC 2.0 within Illustrator CS4 for a preview, it doesn't calculate the opacity of each channel. I use the first channel to render my substrate color, my original file had a pure black for my substrate. Then I calculate the opacity of Inks being used on the other channels. This is a major bug for me. I have no idea what Illustrator will do if my first channel in the DCS 2.0 is something other than Black, I haven't tried yet.

  • Print Problems with Elements 9 for Mac

    I cannot print borderless (randlos) on format 10 x 15 (or any other) on my Printer Canon PIXMA MP970. With Elements 8 for Windows there is no problem. I have tried any possible combinations of adjustements and have the lates printer driver installed.

    10 x 15 cm is a standard European paper size but the choice ist not available in the paper size selection. The choices avaiIable seem to be only American. I have to define it as user defined (Benutzerdefiniert). I have contacted Canon but they have no solution for this problem. It seems that PSE 9 for Mac and Canon printer drivers don't like each other. A least the German versions. With PSE 8 for Windows everything works fine. There the standard European paper sizes and borderless printing can be selected with no problem. As mentioned in other topics rotating is although a problem. Lucky enough I have also a Windows system with PSE 8.

  • Printing problems with Elements and iPhoto on OSX 10.5.7

    I am having problems with printing photos on my printer (Canon iP4000) since getting the new iMac with OSX (10.5.7) and using Photoshop Elements 6 and iPhoto. The Canon printer driver (and all my other data) were copied to my Mac by the techs at the Apple store from which I purchased the iMac. (I previously had a Mac G4 with OSX 10.4.11 Panther.)
    Photos that used to come out crystal clear and brilliant on the printer from the G4, now are faint with kind of a white veil. When I try to print in Elements, I get a message that says "Some PostScript specific print settings (Interpolation, Calibration, Encoding) will be ignored since you are printing to a non-PostScript printer." I really have no idea what that means. Anybody?
    Text printing comes out fine, both from word processing documents and web pages. I am using the latest printer driver (4.8.3) for the iP4000 (probably 4 years old or so), and there are no new driver downloads available for it. I trashed the Canon software/drivers and reinstalled, to no avail.
    Canon Support has been helpful and have made many suggestions, but none has worked. I tried printing with Canon's EasyPhotoPrint app, and the photos print fine. So the problem appears to be a compatibility of the printer with Elements 6 and iPhoto.
    Has anyone else had this experience? Does anyone have an opinion if this means I need to get a new printer? If so, any suggestions on a good, moderately priced one for Leopard on the iMac that will definitely work with Elements 6 and iPhoto?

    The v4.8.3 driver she has is the latest version Canon has supplied.
    Given the driver is working okay from some other applications, there has to be something amiss with the colour management of iPhoto and PSE6.
    For iPhoto, as a test I would suggest the Color Options > Color Correction is set to None to see how this impacts the printed image. Then I would try the BJ Standard and ColrSync settings to see how the output is affected.
    During the Color Options trial, ensure the Quality & Media > Media Type is set to the appropriate paper type, such as Photo Paper and the Print Mode be set to Top Quality Photo. With regards to the Media Type setting, some of the paper stocks have a profile associated with them. If you use Photo paper but use the Plain setting, then you will get a washed out print.
    Pahu

  • Printer Problems since updateing to WIndows 8.1

    Before I updated to Windows 8.1 the other month everything was fine on my new laptop then I went to scan something from my HP Photosmart B109n and it didn't work because the driver was now missing and the HP app that replace the HP printer manager is useless.
    On the advice of the HP site I tried to download the new driver but it wouldn't go, it said I had to remove the exsisting installation but when I try it just restarts the computer but is still there afterwards. It turns out that the uninstall has gone missing from the current and the install is missing from the install program I have downloaded.
    As a last resort I used the sytem restore but not only has the printer issues not changed but now some of the pre-loaded apps won't work and are asking for the Developers Licence to be renewed.
    I am at a lost as to what to do next - please help!

    Your notebook isn’t known to me but in case of Win 8.1 update you should check this Toshiba update to Win 8.1 page: http://www.toshiba.eu/innovation/gen...ws8_1-message/
    There you can check if the Win 8.1 is supported on your notebook and how to perform the step-by-step update to Windows 8.1
    Some drivers must be uninstalled and updated after the Win 8.1 update installation!
    Regarding your printer issue:
    Every printer manufacturer provides own drivers for the Windows system.
    It’s not known to me if HP released compatible Win 8.1 drivers for the own Photosmart B109n printer but to be honest this issue isn’t related to the Toshiba notebook. If you have problems using HP printer in connection with Win 8.1, you should visit the printer manufacturer support page to get some workarounds and troubleshooting tips.

  • Printing problem for Arabic language in Script..printing in reverse...

    Hi Experts,
      I have a customized P.O script which is now to be made for arabic language.i have excel sheet with me which is translation of english to arabic,
    1.  how can i proceed with the form in order to get exactly in arabic.
    2. as arabic is read from right to left, presently i am getting everything in reverse. in a sentence of five words in arabic, the last word is printing first and so on.
    3. even the left window is printing on right?
    plz suggest me what kind of steps should i take in order to get exactly in arabic.
    thanks in advance..
    Cheers,
    Pavan

    Hi Pravan,
    This is a little tricky problem, to make a Smartform in Arabic you need to execute in the followin steps:
    (1) Login to SAP using Language = AR(arabic).
    (2) Develop the Smartform using this setting. I should warn you that everything you develop will be done from left to right but the display will be from right to left when the smartform layout is executed, so you need to program accordingly.
    (3) Once you have finished developing in ARABIC logon come back to the normal EN logon and run the smartform function module with
    IMPORTING....
    CONTROL_PARAMETERS = W_PARAM
    (where W_PARAM-LA = 'AR').
    This will make the smartform run in arabic in the english logon. Also make sure that you do not try to edit the smartform in english logon otherwise it will revert back and give you the same problem. Hope this helps even though its late    .

  • Printing problems for photosmart 7520

    I do not have my printer set up as wireless, because I do not have the equipment (router or modem or whatever it might be called) It is plugged into the back of my tower. I assume that means it is not set up as wireless. I only have one computer, no laptops or anything else.
    I am not computer literate, I read several other questions and couldn't quite find my exact problem. I have no idea how to find an IP address either.
    The printer used to work fine. The blue light always flashed - I assume because I don't have the wireless equipment
    the power button next to that is a white color, doesn't change when I press it or when I unplug the cord from the tower.
    UNABLE TO COMUNICATE OR FIND NETWORK PRINTER is the message I get. Can you have a network printer with only 1 computer in the house?
    The touch screen is black and does not come on.
    Windows 7 64 bit operating system
    Not sure exactly what this is off back of printer: FPU CZ045-64004
    I tried to install updated software, it didn't make any difference.
    I installed the HP doctor thing - would not print test page, think I had to choose network or wireless and I don't think either of those apply.
    The only thing that I think might have something to do with my problem is I installed a free AVG PC Tune up.
    Any help would be appreciated. I am losing my patience, been at this for 4 hours now.

    Hi Christina-D,
    I understand that you are having an issue printing with you 7520. I would like to assist with this issue but I do need to clarify a couple of things first so that we are able to narrow down the issue.
    First is the printer plugged directly to a wall outlet? If not please plug the printer direct to the wall outlet, so that the printer is getting the right amount of power to work properly.
    Second the touch screen on the printer is this black or are you able to see the different icons when the printer is turned on?
    Third to test the functionality of the printer, could please print a self test report from the printer itself. I have included a document Printing a Self Test From the 7520
    Please let me know the answer to these questions. Thank you.
    I worked on behalf of HP

  • Drill-Down Report Printing Problem for Selection Parameters

    Dear Experts,
    Have tried to configure Drill-Down Report for Vendor Balances,
    Am having trouble when printing this drill-down report, Printing is coming OK but it comes with ALL selection parameters, for e.g, have entered 20 vendor codes for the balance display, system first prints all selection parameters and then it prints the output of vendor balances,
    User does not want selection Parameters to be printed with the Report Output. Please find below screenshot for the problem.
    Input Parameter Screen
    Report Output Screen
    Print Preview Screen (First Page - Selection Parameters)
    Your help is much appreciated, if anyone can guide me, how to switch off selection parameters from Print Output of Drill-Down Report
    Thanks
    Regards
    P

    Hello Ms. Preeti,
    Thanks for your reply, Have designed the report through FKI0 (FKI*)
    Have already looked these setting, but these are not helping really, PFB screenshot for settings am having in my system, if you have any idea which can avoid User Input Parameters from printing then it will be really great help
    Thanks for your help
    Kind Regards
    P

  • Excise Invoice Print problem for multiple Invoices

    HI   All,
    I Have developed a Zprint prog and zsmartform and attached it to standard tcode J1IP .
    when we execute J1IP outputtype J1I10  we get multiple invoices . if we select one check box and execute and press print preview/ print we get the print correctly . But if we check multiple check boxes and press print/preview then we have to press print button multiple times/come  back for every invoice .
    My requirement  is when we execute J1iP for multiple invoices it should not come multiple times pop up window ..ie in one print request we need to send multiple invoices . How to achieve this functionality.

    Hi,
    use NO_OPEN and NO_CLOSE fields of CONTROL_PARAMETERS structure
    in Your call to smart form function module.
    Currently You print every invoice in separate spool request.
    You should print all invoices in one big spool requests.
    Set NO_CLOSE = X to all, except last one, and NO_OPEN = X to all, except first one.
    Regards,
    Przemysław

Maybe you are looking for