Printing Problem from Safari

I am trying to print the schedule from this site:
http://www.photoshopworld.com/schedule.html
For some reason the schedule prints like this from both Safari and Firefox:
http://i43.photobucket.com/albums/e363/juano28/ClassSchedule
How can I get this schedule to print the way it is displayed on the site?
I guess I could Command + Shift + 4 and piece it together in Photoshop but I am hoping there is an easier way
I am using Mac OS X 10.4.10 and Safari 2.0.4
Thanks

For some reason the schedule prints like this from both Safari and Firefox:
http://tinyurl.com/2nvsao
Message was edited by: john knight1

Similar Messages

Printing problems with Safari 5.0.3

I just bought a new HP LaserJet Pro M1536dnf Multifunction Printer to allow me to use AirPrint on my iPad and iPhone. But now I have a problem with printing Web pages from the Safari 5.0.3 browser on my Windows Vista PC to the printer over my network. The printer does not print any type or graphics on the page although it does output several nearly blank pages each time I try to print. The only mark on the pages is a faint thin gray line at the bottom of each page.
Safari is the only program where this problem occurs. The printer works correctly with Internet Explorer, Outlook, and Word. I did not have this problem with my previous HP printer.
The M1536dnf also prints correctly from the Safari browser on my iPad through AirPrint.
I also tried printing in Safari on a Windows 7 laptop on the network and had the same problem.
Any suggestions?

I reloaded the HP drivers. But that didn't fix the problem. Because the problem is only with Safari in Windows and not Internet Explorer (nor any other Windows applications), it seems to me to be a Safari problem rather than a problem with the printer. On the other hand, Safari for Windows printed correctly on my previous HP LaserJet 1022nw and its driver. I've contacted HP and they want to lay the blame on Apple. I have reported the problem to Apple as well and have heard nothing. Once again, after paying hundreds of dollars on new equipment to be able to print from my iPad and iPhone, the user is left to fend for himself. Others seem to be having this problem. Perhaps, Apple and HP might consider working together to the benefit of the customer.
(One bright spot: the 1536 does print from the Safari browsers on the iPad and the iPhone.)

Can't print pdf from safari

Ive been having this issue forever
When I need to print a PDF file, I cannot do so from Safari. It just comes up blank pages.
If I go to another browser like Chrome, I have no problems.
Anyone know why or what I can do?
It seems Safari causes so many problems in addition to this one that I seem to have to use other browsers more and more

Also, the little printing window that usually pops up on the dock when you print something and then quits itself after printing doesn't quit itself anymore. I have to actually select it and quit it myself. It's very annoying.
Try this thread:
http://discussions.apple.com/message.jspa?messageID=5650720#5650720
Hope this helps.

Home network printing problem from Windows 8

I have 3 PCs on my home network:
1.    Windows XP desktop (Pro SP3) with HP 6500 E709a USB printer.
2.    Windows 7 desktop (Ultimate SP1 64 bit) with HP 1018 USB printer.
3.    Windows 8 (64 bit) laptop.
Both printers are NOT Ethernet printers.
All computers can see each other and share folders on the home network.
Computers 1 & 2 can freely print on their own printers, as well as on each other's printer.
The problem is with computer 3 (Win8): it can see both printers, but can't print on either (in fact, I can print a test page on the HP 1018 printer from the printer driver on the Win8 machine, but I can't print anything from any application).
I tried to install HP 6500 driver on the Win8 machine, I turned on Network Discovery in the Advanced Sharing Settings on it, but it still doesn't work.
Any help would be appreciated.

Is there any "general puprpose" driver for HP 6500 E709a, something to replace the WIN8 driver that fails?

Printing problems from iPhoto 6

For some odd reason I just can not print anything from iPhoto 6, it goes through the processes of printing, then brings up the Printer utility as if it's ABOUT to print, but then it fails and the Printer utility simply goes to "Jobs Stopped" without any further details as to WHY it stopped.
I can however print from all other apps, and even saving image to PDF, then print the PDF from Preview works...
What's going on?
Dual 533 Mhz G4 Tower and Epson Stylus Photo RX620 with latest version of OSX, iLife '06, and Printer Drivers.

Hello--did you ever solve this problem? I am encountering it myself and have not figured out how to solve it. Would appreciate any help.
thanks
For some odd reason I just can not print anything
from iPhoto 6, it goes through the processes of
printing, then brings up the Printer utility as if
it's ABOUT to print, but then it fails and the
Printer utility simply goes to "Jobs Stopped" without
any further details as to WHY it stopped.
I can however print from all other apps, and even
saving image to PDF, then print the PDF from Preview
works...
What's going on?
Dual 533 Mhz G4 Tower and Epson Stylus Photo RX620
with latest version of OSX, iLife '06, and Printer
Drivers.
iMac G4 800 mhz Mac OS X (10.3.9)

HT4550 Download or Print PDFs from Safari

I cannot get Safari to download pdfs or print them from the screen. If I try to download it tells me file cannot be saved. If I try to print, the pages are blank. Any suggestions?
iMac 27"

Hello:
It has been awhile - hopefully my memory is OK.
Highlight any existing PDF file on your computer (don't open it). Then go to the file menu. Open with should give you the available choices. As I recall, this sets the option globally.
Barry

Printing Problem from ALV

Hi,
When I run my report, its perfectly working fine with all the data, subtotals, grand totals etc.
But when I print the ALV by clicking the PRINT Button on the Standard tool bar, My first subtotals are printing correctly. From second, its printing ZEROES and my grand totals are printing double the number as I see on the output.
This is strange and am not able to understand why I get those errors.
ANy pointers please.
Thanks,
Kiran
Edited by: kiran dasari on Sep 9, 2009 1:04 AM

Hi Roger,
I am using Function Module "REUSE_ALV_HIERSEQ_LIST_DISPLAY"
I am displaying a hierarchical ALV with subtotals, page-breaks & grand totals.
The strange thing is that my first SUBtotal gets printed properly. Its the problem from the second subtotal onwards.
Finally, the grand totals also a problem(Doubling when i print first time and triplling,if i print 2nd time ...and so on...)
ANy more clues please.
Thanks,
Kiran D

Wireless printing problem from OS X 10.2.8 and Win XP

I have three machines I want to be able to print wirelessly through my airport express. Currently, only one of them will print wirelessly - which is lousy, help.
Machine #1 is running Windows XP. It connects to the internet through the airport express just fine, no problem there. The problem is connecting to the printer. Machine #1 will print just fine when I connect the USB directly to the computer, but wirelessly I can't figure out how to hook it up properly through the airport express to the printer. The part I keep getting hung up on is that the airport express manual says to add another printer put in 10.0.1.1 for the IP address, but when I do so, the machine says that that address is already taken and it beeps at me real loud and gives me an error message - end of story. I suspect I need another IP address, but I can't figure out where to find it. Help.
Machine #2 is my old ibook G3, which is running Mac OS X 10.2.8. The airport express should be able to make it so I can print wirelessly from machine #2, but this one is not working out either. Machine #2 connects to the internet just fine, and when I connect the printer manually to machine #2 it prints just fine. When I try to print wirelessly, through the airport express, it starts out ust fine, the printer begins to print, then all of a sudden, as if for no reason, it "stops the job". I "start the job" back up through the print center, and then it "stops the job" again. we play this game a bit, but I never get farther than printing the first few lines of my print job. It never really makes any progress, it just pretends like ti might if it felt like it. In this case, I've been looking online for some software patch that would fix this problem - looked on the apple site and on the epson site, and haven't made any progressfor many hours. Help!
Machine #3 has no problems. It surfs the internet, plays music on my stereo and prints wirelessly without any trouble at all. It is my new ibook G4 running OS X 10.4. Is it possible to get machine #1 and machine #2 able to print wirelessly just like machine #3? (i'd like all three machines to be able to stream music to my stereo too, but I don't want to push my luck. I'll be ecstatic if I can get these other two machines to print wirelessly. I'm so tired of having to pull that printer cable out from under the couch everytime I need to print something.)
Thanks to anyone who can help. Hey, thanks for just reading this.

thank you for your response!
I am about to look into the efelix site for the PC, thank you. i'm excited.
for the mac, me thinks that i am out of luck with updating the driver. on the epson site the most recent drivers for my printer (epson sytlus photo 820) are for OS X 10.1.3 - 10.2.6, and I am running OS X 10.2.8.
Hmmmm, I downloaded the driver anyway, and it gives me an APPLICATION LAUNCH FAILURE because of a "shared library error" when I try to launch the new drivers. The other thing on the site is a PIM II Plug In - which doesn't look like a driver to me.
a link to the lack of drivers for my poor mac...
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 14409&prodoid=22966687&infoType=Downloads&platform=Macintosh

Odd Printing Problem from BO 6.5.1

Hi, I have been asked to support BO 6.5.1 users and some of them create .pdf files which don't print correctly. The heading boxes, table structures and formatting are retained but the text is replaced with random characters. The docs look fine on screen, it is only when they are printed out that the problem occurs. I am sure I have ruled out printing problems, email problems and Adobe 8.0 problems, particularly because this is only happening with pdf's from BO sent to any printer and so I feel it must be a fault with BO. Has anyone seen this before? Grateful for any advice

Hi Greyhat,
as you refer to the legacy technology VB6 I recommend to post this query to the [Legacy Application Development SDKs|SAP Crystal Reports - Legacy SDKs; forum.
This forum is dedicated to topics related to legacy SDKs, including the Report Designer Component (RDC), OCX, VCL, and Crystal Reports Print Engine (CRPE).
It is monitored by qualified technicians and you will get a faster response there.
Also, all Legacy Application Development SDKs queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

Mac 10.6.8 is printing very light and washed out, however, the color prints fine from Safari and my husbands PC, help!

My Mac 10.6.8 has always printed great from Firefox to my Canon printer, but now the black and color is all washed out. I can print same page from Safari or my husbands PC and the page is great! What is going on! ?

Other things to try:
Examine your specific version of Optima by going to Type menu > Find Font, clicking on the Optima font and choosing More Info (I think) and find the specific version number. See if you can uninstall the font and reinstall another Optima font with a different, preferably newer version number. There has (historically) been a bad version of Optima floating around for years. Maybe you have it.
Use a free utility like FontNuke or FontFinagler to get your Mac OS to reset its font plists. Sometimes that makes the OS feel better.
Use the built-in Disk Utility to repair file permissions. You never know.
Export your old document out to IDML and reopen that resulting idml file back into a new freshly written INDD file. This might remove internal database corruptions.
All these are chicken-soup things to try and they might be good for you.
Best,
Mike Witherell in Florida

Having trouble printing pdf from Safari

I'm new to Mac, so I'm hoping there is just some secret place I don't know about to adjust these settings.
Here's the issue: I am trying to print a pdf certificate (full page with a thin border on it) from Safari. When printed, the page is offset to the right and down, like there is some sort of default page margins set up in the browser.
What I've tried: There is no "page setup" option in the "file" menu. In the print menus (the ones that appear when you click the arrow next to the printer dialogue box), I have tried selecting a borderless paper, printing borderless pages (with the sliding bar at both ends of the spectrum), changing the orientation, changing the zoom, and creating a custom paper with custom margins.
No matter what I do, the page still prints out with a sizable margin on the top and left, the certificate border is right at the edge of the page on the right, and off the page on the bottom. This also happens when I print the page from Safari to a pdf, so it's not the printer.
Any suggestions?

Hi
Don't rely on an HP updater to work. They don't quite understand a Mac mentality.
You can find the latest HP driver for your printer here.
Yes, a faulty printer driver will affect Safari's printing.
After you install the driver, "repair permissions" using Disk Utility found in your Finder's Applications>Utilities folder.

Printing pdf from Safari

Now, when I try to print a pdf from Safari, the print window shows nothing to print, and subsequently, nothing prints. Does anyone know what's happening? It worked fine for years.

Hi
Don't rely on an HP updater to work. They don't quite understand a Mac mentality.
You can find the latest HP driver for your printer here.
Yes, a faulty printer driver will affect Safari's printing.
After you install the driver, "repair permissions" using Disk Utility found in your Finder's Applications>Utilities folder.

Printing Problems from iMac G4 to HP Photosmart 7760-photos heavy on pink!

Hello,
We have an iMac G4 Flat Panel using OS 10.3.9 and are connected to the HP Photosmart 7760 Printer. The printer is printing heavy on the pink side photographs.
When we print directly from our camera card, the printer prints fine. True colors. When we print using any software application, (ie Photoshop, iPhoto) the printer prints extremely heavy on the pink side. We have installed new cartridges, have cleaned and calibrated the printer, have unplugged and restarted the printer and still to no avail we have pink tinted photographs.
Could someone help please?
Thank You!
iMac G4 Flat Panel Mac OS X (10.3.9)

It seemed to be nothing involving my printer, a recalibration of the computer display did the trick.

Color shift printing problem from LR solved!!

Check this discussion for workaround to the color shift printing problem in LR. It's for the 3800, but I assume it also applies to other Epson printers, and quite possibly to other printer vendors.
http://www.adobeforums.com/webx/.3c05f2c5/6

Yes it applies to Canon as well.

Printing problem from home to office

I have an HP1606dn laser printer which works fine when I am in the school building. However, all of a sudden, if I try to print wirelessly from home (which I have been doing for 2 years), I get the message that the printer is offline and I cannot print. Apparently, the printer is not turning on automatically if I am using a VPN. Any suggestions?
Thanks a million!!!
Mary Jane

Are you using Windows or AppleTalk printing to connect to the 2003 server?
Have you tried deleting the printer from the server and re-installing it? Tried re-installing the driver and PPD for the Phaser? Also, have you tried deleting the printer from the Macs and reconnecting?
Do your server's Event Logs show anything?
bill
1 GHz Powerbook G4 Mac OS X (10.4.3)

Printing Problem from Safari

Similar Messages

Maybe you are looking for