Printing problem - GCC Elite 12/600

Has anyone managed to get their MBP to add this to the printer list and print to it? Works fine with all other macs, but won't add, even as a generic post-script printer, on the MBP. 'No route to host' is what it says, even though it shows as an AppleTalk printer in the add printer dialog. If I look for it as an IP printer and input its IP address it can again see it, but won't add it as a generic PS printer as the 'connection times out'.
Driver problem or what? I have two of these printers and will be irritated if I have to buy new laser printers, that may not have available drivers for the MBP.
Chris

I just retired my 8 year old Elite 1212 because of GCCs terrible support. They wanted $160 for a firmware chip to make it 100% OS X compatible. It just wasn't worth it IMHO when you can buy new printers that are faster and do more for $300.
Anyway, if no one posts an answer by tomorrow I'll fire up the Elite 1212 and see if I can get it to work with my MBP. GCC has never updated their driver since 10.2.

Similar Messages

GCC Elite 20/600 and Lion

Hi All
I have a venerable but fully servicable GCC Elite XL 20/600 which I really do not want to scrap.
I am attempting to connect it to my MacBook Pro (late 2011 model) using an ethernet crossover cable. I have the original .ppd file, version 3.31.
Having searched the discussion threads I found this:
https://discussions.apple.com/message/11530412#11530412
which seemed to provide an answer to my problem. However, once I have completed the steps I get the folowing message:
Unable to verify the printer on your network.
‘192.168.1.10’ may not exist or is unavailable at this time.
Would you still like to create the queue?
I have tried IPP and LPD options in Print & Scan
I have an ethernet router which I could use to make the connection ... but it seems to me that the crossover cable should work.
Does anyone have any idea what I should try next?
Cheers
Paul

I have the original CD version 3:33, but with Lion I can not open it ..
I tried to download it from the GCC (GCC-1.img PPD Installer) and there is the same problem, I can not open it (the image should be converted obsolete)
If you would be able to send me the ppd file I would be very grateful
this is my skype nik: gabri8781
or my email: [email protected]
(yuo saving my life)
ps: i open the file but its old (vise installer) in lion i cant install

How toinstal printer GCC Elite XL 20/600

Hoe krijg ik mijn GCC Elite XL 20/600 printer op mijn nieuwe iMac (10.8.3)

Hoe krijg ik mijn GCC Elite XL 20/600 printer op mijn nieuwe iMac (10.8.3)

GCC Elite XL 40 - Will Not Print in Snow Leopard

I am desperate I have wasted two days working with GCC tech support via phone and email and have followed their instructions for setting up my GCC Elite XL 40 as an IP printer for our MacPro running Mac OS 10.6.5. I have checked and double and triple checked the many settings on both the printer and my MacPro - ALL are correct (according to the instructions provided) but the printer will not Print. It is recognized by the computer — got a green light on my print queue — says its ready to print but nothing happens.
I have redone this so many times I - added, deleted and re-added the printer several times - I am just on the verge of giving up but I need this large format laser printer to work with this computer — it's our workhorse for big projects.
There was a Posting here from someone named Rocky dated a few months ago and that information conformed to what I have been instructed to do by GCC but it still does not work. All other Macs on our network are printing to the GCC Elite XL 40 just fine as usual. This is the only workstation we upgraded to Snow Leopard plus this computer is hard wired via Ethernet not Airport.
If there is anyone out there that has made this work please send me some info or direct me to an expert. Thank you.

Looking at the specifications for this printer it shows that the unit support Postscript Level 2, which indicates it's quite an old model. This could be causing problems with Snow Leopard.
The specs also show the printer supports PCL5e and PCL6. So did the GCC techs get you to try creating a printer queue using the Generic PCL Laser Printer? If not it would be worth a try. Make a new print queue using IP > LPD for the protocol, not sure if you need a queue name so leave this blank, and select Generic PCL Laser in the Print Using menu. This Generic driver gives you no options and probably no support for the larger paper sizes but it will let you see if you can get a print job from your Mac to the printer.

Is my 10 year old GCC Elite XL 20/1200 printer still usable?

Hi:
My wife is a graphic designer, and loves her 10+ year old GCC Elite XL 20/1200 printer. Full printer specs are at http://gccprinters.com/products/201200specs.html
In the last several months (since a model year 2006 iMac crashed, which was our lifeline to it because it ran an old enough version of OSX to talk to this printer) she has not been able to use it.
Anyone have any tips on how to print from a relatively modern iMac (model year 2010, 27" 3.2GHz machine running OSX 10.6.8) to this ancient printer?
In a perfect world, the old iMac would boot up, but that hasn't happened yet...
Please let me know if you need more details.
Thanks!
Kevin

Help!!
Until Mavericks I printed from my macbook pro laptop to a HP1100c (parallel-port interface) internet connected on my old generic laptop running Ubuntu
Been doing this since Leopard and worked through OS updates since then without any problems. Now on Mavericks I get "Filter failed"
I can't remember exactly how it runs - I know at one point I was using Gutenberg and I have Gutenprint 5.2 installed in /usr/share and these libs
/usr/lib/libgutenprint.1.1.1.dylib
/usr/lib/libgutenprint.1.dylib
/usr/lib/libgutenprint.2.0.3.dylib
/usr/lib/libgutenprint.a
/usr/lib/libgutenprint.la
/usr/libexec/cups/driver/gutenprint.5.2
/usr/libexec/cups/filter/rastertogutenprint.5.2
but I also have some guten stuff under macports. I long since stopped maintaining macports and it would be a major effort for me to delve into updating it.
Anyone point me in a good direction - like everyone I need a quick fix that doesn't involve delving into how to update macports (is it even running that subsystem - I don't know). Sure I can deal with these low level things but I have a life too - I just want it to work - understanding macports etc. again is dead time.
Come to that I lost track of how to configure printing on the ubuntu half of this too. It would help enormously if I knew where it was failing - what does "Filter failed" mean. It might mean some shell script somewhere failing - if so where, what subsystem ?
andy

GCC Elite 21n+ Printer Stop working after Upgrade to Snow Leopard

GCC Elite 21n+ B&W Laser Printer no longer works after upgrading to Snow Leopard 10.6.2.
A back-up HP 2015DN Printer works intermittently. It will not work with ethernet cable connected to Net Gear Ethernet Hub (model FS105). But will work most of the time when ethernet cable is connected directly to back of computer.
Back to GCC printer. Just cannot get it to work.
But I cannot figure out what the IP address is for the GCC printer. Tried 192.168.1.4:9300
See post (discussions.apple.com/thread.jspa?messageID=10127869). Still did not work.
GCC tech have this work around. Here is what I received from GCC via email.
+At 01/02/2010 12:21 AM we wrote -+
+Since Apple has made the decision to eliminate Appletalk from it's Operating System, you are now forced to set the printer up over TCP/IP. Please keep in mind that GCC has never provided drivers for the Mac. We use the Apple Built in Print Driver. We do provide an OS X PPD Installer located on our website that I recommend you download, unstuff, install, reboot your Mac, then add the printer. You can find the Installer at http://www.gccprinters.com/support/doc/ Click on the Model of your printer and download the OS X Installer. DO NOT download the Applications Folder.+
+You will need to set the printer up over TCP/IP, which means you will need to pull the IP Address of the printer from the Printers Configuration Page. Once you've done that, please do the following:+
+You can add the printer over IP, that should work fine. Here are some steps for you to take.+
+1) Select 'System Preferences...' (4th item) from the 'Apple' menu. The 'System Preference' panel will appear as a new window.+
+2) Click on 'Print & Fax' icon (second row 'Hardware', second icon from right side). The 'System Preferences' panel will change into the 'Print & Fax' panel without opening a new window.+
+3) Click on the '+' button to add a printer (2/3 the way down on the left side on the 'Print & Fax' panel). The 'Add Printer' dialog will open in a new window.+
+4) Select the 'IP' icon in the top row of the 'Add Printer' dialog.+
+5) Next to 'Protocol' select LPD Line Printer Daemon.+
+6) Next to 'Address' type in the IP address you assigned to the printer. The Mac should prompt "complete and valid address".+
+7) (Optionally) Next to 'Name' set the name of the printer to something friendlier. Normally it defaults to the IP address enter in the previous step. The 'Name' is what the printer is called in the print dialog.+
+8) (Optionally) Next to 'Print Using' change/verify the PPD.+
+9) Click 'Add' in the bottom right corner. After a few moments the 'Add Printer' dialog will close.+
+10) The printer added in the previous step will appear in the list on the left side of the 'Print & Fax' panel. Click on the close box in the left-top of the 'Print & Fax' panel.+
+11) Done. You should be ready to print.+
Still cannot get the GCC printer to work or discover its IP address. Printer's Configuration page says
TCP/IP: Enabled IP address: Unknown subnet Mask 255.255.255.0
When I download the Drivers from GCC Web Site I only get a Text Document with loads of meaningless
gibberish. There is nothing to unstuff and install.
All worked well with OS 10.5.
Thanks for shedding any light.
John L.
Thanks,
John

Hello John,
At this stage you will not be able to get this to print until the printer has a valid IP address. According to your post, the IP address setting is enabled but the actual IP address is unknown. This is most likely a result of the GCC being set to DHCP but if there is no DHCP server or router capable of assigning the printer an IP address, then it will not get a valid address.
So, the first thing I recommend is you check the documentation for manually setting an IP address into the printer. This address needs to be in the same subnet as your Mac. If you check System Preferences > Network on the Mac, you will see your IP address and subnet mask. If the subnet mask is set to 255.255.255.0, then you subnet will be the first three sets of numbers. For example, a device with an IP address of 192.168.1.12 and a subnet mask of 255.255.255.0 has a subnet of 19.2.168.1 and a network address of 12. Ideally, so that other devices can communicate with this device, they also need a subnet of 192.168.1 but a different network address, any number between 1 and 250 but one that is not already being used by another device, such as 12 in this example.
Once you have the IP address set in the printer, then you add the printer as the GCC tech stated, using IP > LPD for the protocol. Note that you will only need to enter the IP address, such as 192.168.1.4 as per your post example. Don't enter any other numbers, such as the 9300 port reference you have tried already the colon after the IP address followed by the 9300).
For the Print Using, you can use Generic PostScript to begin with as a test. If you then wanted to use the GCC PPD, then the link is okay. When you select the 21+n the next page shows the 21+ installer for OS 9 and OS X. This is a stuffit packed file so you will need some form of Stuffit (Stuffit Expander is a free download) to unpack the file first. Once unpacked, there is most likely an installer that you run. This will copy the PPD files for the printer to the appropriate folder.
Hope this helps. Please reply if you require more help.
Pahu

Printing problem when PDF is sent to the printer with certain fonts - missing text

I'm running into a printing problem when PDFs containing certain characters of the Calibri font are used. The text in large sections of the PDF is missing on the paper version, but the text is there on the screen. It's also happened when the PDFs we created were e-mailed out to a client and printed on their printer. The problem is not present when printing directly from the programs (Microsoft Word, Excel, Visio, etc.). I've been trying to get tech support from Adobe on this, but every time I call they apologize and say they will call back in 4-6 hours with an answer. Same result each time, no call back. If anyone from Adobe is listening, it's case number 184891587. The font appears as an embedded subset when I look at the document properties. Sometimes deleting one or two Characters allows for larger text blocks to be printed - i.e. removing a long dash in bold from the heading of a paragraph makes the paragraph reappear when printed to paper from PDF. In all cases the PDF appears correct on the screen. Printing as an image allows the text to appear, but the image quality isn't acceptable for small text, even at the 600 dpi setting on the printer. If the PDF is sent out by e-mail, we do not have control over the end-user's printer setup anyway, so we need this to work in all cases.
The setup/process I'm using is as follows:
Windows 7 Professional SP1 64-Bit
Microsoft Office 2013 - problem is present when printing documents from Word, Excel or Visio. Even other variations on documents.
I've tried Acrobat versions 11.0.0 to 11.0.5 as well as Acrobat Pro 11.0.0 and 11.0.1. Same Result
Printing to Adobe PDF as the printer, from the third party application
Printing to a Xerox printer from PDF using Acrobat - Text missing
Client prints to Konica printer - Text missing
I print to the wide-format Ricoh (which also does 11x17) and the text is present.
Is there something I'm missing? Is the entire font not getting embedded into the PDF file? I noticed that rolling back to a much older version of the Calibri font (1.02 compared to 5.72) makes the problem mostly go away, but it's not completely gone. Is it possible the font is too large to be completely embedded? Where can I go from here?

Success! At least for now. It looks like my problem was fixed with Adobe's most recent update, 11.0.06. From the release notes:
PDF creation
Added support for Lotus Notes 9.
Added support for WebCapture in IE 11.
Added support for conversions from AutoCAD 2013.
3652540 A blank pdf is created for files having hidden visual style.
3601108 Flow Chart converts as a multicolored square.
3654345 Word documents missing parts of images in conversion to PDF.
3654572 Temporary file size increases when creating pdf by combining multiple files into one PDF.
3670155 PDF file created with Distiller XI prints incorrectly to some printers. (Emphasis mine)
3599407 Checkbox check marks do not appear in these files.
3663233 IE Web Capture in localized OS: Icons and drop-down menu items are missing and conversion dialog is not localized.
3651931 Chrome Only: Few web pages when converted to pdf from Chrome plugin doesn’t show up the Save As dialog.
3597910 EPM Mode On: Web capture is not working on Windows 8-32 bit when cache folder is missing.
3610644 Firefox 23.0: With Firefox version 23.0 (latest), the WebCapture icon shows up very dim as if it is disabled.
3650244 ODA falis to convert DWG files to PDF for large files.
I don't know if that's definately what solved the problem, but it sure sounds similar and this is the update that made the printing problem go away. We can't get the PDFs to fail at this point with our printers, even with Calibri 5.72. I'll come back to thread if we have printing problems at the end-user locations.

Printing Problems since 10.4.0

My problems with printing have not improved from 10.4.0-10.4.3. I still have problems with epson printer utility. On any machine with tiger, it will just crash on launch.
I've tried re-installing the drivers, then I figured 10.4.3 would have fixed it since their were around 600 bug fixes (including printing). But, nope, still not working. I then tried going to the printer preferences and remove the printer and then re-add it to then find out the printer would not work at all. So just to get printing back I had to install gimp-print drivers so that i could at least print again. I am very frustrated with this problem. No Epson printers that I have dealt with work right with tiger. I love tiger but hate the printer problems.
My machine is very clean, I do regular maintenance. Does anyone have any advice, or is everyone having the same problems.

I am on a G4, installed Tiger and could not get my printers to work. I have an older Epson Stylus Color 900 and a new HP Business Injet 2800. I called Apple and went through a variety of steps unplugging everything, removing, then adding printer in print utility and the usual stuff. That got the HP going but still nothing from the Epson. Apple suggested contacting EPSON (i.e., I have no solution). I emailed EPSON tech support and they actually provided a solution that works, if you follow the steps carefully. Here's what they sent:
"Thank you for contacting the Epson Connection.
Please follow the instructions below to completely remove and reinstall the
resident Epson driver package for your printer. You can leave the printer
on and connected throughout.
REMOVE FILES
1. Double click on the MAC HARD DRIVE.
2. Double click on the LIBRARY folder.
3. Double click on the PRINTERS folder.
4. Drag the EPSON folder to the trash can.
5. Close any open windows.
6. Double click on the MAC HARD DRIVE.
7. Double click on the LIBRARY folder.
8. Double click on the RECEIPTS folder.
9. Delete any "Epson" receipts.
10. Close all open windows and restart your computer.
REINSTALL THE EPSON DRIVER PACKAGE
1. Insert your Mac OS X 10.4 Install disc. Open CD when it appears on the
desktop.
2. Find and double-click on the Optional Installs.mpkg.
3. After the installer opens, choose the following custom install options:
-Check "Printer drivers" and use arrow next to this entry to expand this
category.
-Check "Epson" below the "Printer drivers" heading. (You do not need to
install other manufacturer's packages.)
4. Click "Install" and follow prompts to reinstall the resident Epson
printer driver package. Restart the computer after installation is
complete.
READD THE PRINTER
1. Go into HD > Applications > Utilities and open the Printer Setup
Utility. The "Printer List" window appears.
2. Highlight and delete any existing references to your Epson printer. (If
you want to be thorough and do not have any other printers on the Mac,
choose "Printer Setup Utility" from the top of the screen and "Reset
Printing System". Confirm resetting the system. This clears any existing
printer entries and queues. If you have other printers on the Mac and use
this reset, you will need to readd them later.)
3. Click ADD. Printer Browser window appears. (At this point your Epson
printer must be on and connected.)
4. Highlight the desired Epson printer model and click the MORE PRINTERS
button at the bottom of the window. (Do not change any other fields.)
5. A window now opens which is identical to 10.2. and 10.3, where you can
select EPSON USB (for a USB cable connection) or EPSON FIREWIRE (for a
firewire connection) at the top of the screen. Highlight your printer's
name and then hit ADD to return to the Printer List with all available
printer/layout options now showing. (If you are unable to see the full
description under "Kind" you may need to expand the Printer Setup Utility
window or extend the "Kind" column to make this visible.)
6. Then, when you have opened a photo and are ready to print, go to File >
Page Setup and File > Print in the program you are printing from and ensure
that the specific printer/layout option you want to use is also selected as
"Printer" or "Format for".
I now have both my printers back. I was starting to think I never would. Not sure that this will work for you, but trying email EPSON via their web site.
G4 Mac OS X (10.3.8)

Airport Extreme Printing Problem with HP Deskjet.

Hello ... I wonder if any helpful folks can assist me with my printing problem? I am using Tiger on a new Intel imac with a HP Deskjet 960C. This printer is listed as having the latest drivers included within Tiger and works perfectly when connected via USB so my problem I guess is not with the software....I have disconnected everything and plugged everything back together again. I also deleted the printer from the printer list within the Printer Setup Utility application.... The imac recognisies the printer and upon pressing the print button everything feels as though its just going to work. The blue barber shop scroll appears but the printer fails to kick into gear and I get the big red exclamation mark appearing in the status box .... I would really love to try and sort this annoying error ... Any ideas? Thanks. Book G4 Mac OS X (10.4.4)

Hello jds17. Welcome to the Apple Discussions!
Unfortunately, not all USB printers are compatible with AirPort base stations.
Take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
o 802.11g AirPort Extreme Base Station (AEBS) or AirPort Express Base Station (AX)
o 802.11n AirPort Extreme Base Station (AEBSn)
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also, you may find the following Apple article helpful.

Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Not printing text only on Canon--grahics print ok. Not printer problem. Prints ok on a Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Without your printer model numbers, readers can only give you vague general directions.
System Preferences > Print&Fax > ...
... shows a list of all set-up printers.
If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
Mac OS X 10.6 Help: Resetting the printing system

Crystal report printing problem in Malayalam

Hi,
I have a printing problem in Malayalam in crystal report.The viewer displays the correct font but the printed output displays the square boxes.I have installed the font.I am using Visual studio 2010 and crystal report 13.0 version.what could be the problem???
please help me...!!!

Hi priyashekar,
I’m afraid that it is not the correct forum about this issue, since this forum is to discuss Visual C#. You can post your question in the
Crystal report forum: http://scn.sap.com/community/crystal-reports-for-visual-studio/content?filterID=content~objecttype~objecttype[thread]
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Print problem. trying to print a document in Preview, the start of the text prints half way down the page not at the top of the page?

Print problems. Printing out an email the text starts half way down the page. I tried taking a picture of the text I wanted to print, tried to print from Preview and have the same problem. If anyone has any ideas I would really apreciate it. Thanks Penny

One more thing to check: System Preferences/Print & Scan. Make sure your printer is set as Default.
I'm using OS X 10.8 and I don't see Page Setup anymore. If you have access to Page Setup, check to see if there are any adjustments to make there.

My "fix" to print problems in LR (using MS XP)

Having had the same problems printing from LR as many others are complaining about, I thought that I might give my 2 cents to what I did to solve (?) the problem. I have to run with current setting in a while to be convinced that it is not just an intermittent fix though ;-)
My problem when printing from LR was that the print came out much too Cyan-Green and somewhat dark when color management where handled by LR. When the same photo was exported to PS Elements (PSE) in Tiff with the Pro-photo color profile embedded, adjustments from LR, and printed using the same driver setting and color management, the print came out fine.
I must mention that I have had fine printout in previous LR versions but I'm not sure when the problem started. But at least from LR version 1.3, 1.3.1 I have had problems printing a proper print.
As I'm not 100% sure what caused the fix, I don't want to leave much info un-documented, so I start by describing my system etc.:
- Athlon 64 3500+ with 2 GB RAM
- Lacie 119 LCD monitor (calibrated with a ColorVision Spyder 2)
- Epson Stylus Photo 890 printer; an old (6-7 years) 6 color dye-sub printer, but it can still produce very good prints. (It is BTW, the A4 printer version of Epson 1290).
- Microsoft XP service pack 2
- Adobe Photoshop Lightroom 1.3.1.
- Adobe Photoshop Elements 5
- Latest Epson 890 printer drivers ver. 5.21/P (from 2004)
- ICC profiles for various Epson printer paper
- Paper used: Ilford Printasia Photo Glossy Paper (but I have tried Epson Premium Glossy Photo Paper as well with same results)
I used following setting:
- In printer driver: "No color management" was selected
- LR and PSE color management; printer profile: Epson Stylus Photo 890 Premium Glossy Photo Paper, Rendering Intent: Perceptual
. LR Print sharpening: High
- LR Print resolution: 360ppi
When the photo was opened in PSE and I had printed a small print with above mentioned printer driver/color management settings. The print looked good, but with a little magenta color cast, so I thought that if I used a different printer profile this might help (I have no ICC profile for the Ilford paper). So I chose the "Epson Stylus Photo 890 Photo Paper" instead and printed again, and this time the photo looked as it did on my calibrated monitor. I have to admit I was a bit delighted even though it was from printed from PSE and not from LR, but seeing that color management worked in other applications was a relief.
In PSE, I also I tried changing to a different Rendering Intent before changing printer profile, but with no success.
Another thing that helped further was to change Media Type in printer driver from "Premium Glossy Photo Paper" to "Photo Paper".
After the print success in PSE I went back to LR and changed the Printer Profile to "Epson Stylus Photo 890 Photo Paper" (still with "No color management" and "Photo Paper" selected in printer driver) and printed the photo again. Now the photo looked as good as it did in PSE (!!!???).
Now I have made a few printer preset in LR for various print sizes, and the prints look fantastic. Every time! Do I have to mention that I am a happy guy ? :-)
BTW, remember that a printer preset also saves the printer driver settings. Forgetting this can easily cause some unexpected results.
The only thing is that, I still do not know what fixed the problem, and I am a bit worried that the problem might come back again. Maybe the print related changes made in PSE and the following selection of the same settings in LR did - somehow - "synchronize" LR to a proper color management. Sounds weird, but if it works...
I hope this long explanation was useful to - at least - some of you, who experience printer problems in LR. LR is a fantastic application, and I enjoy using it, but the printer problems has really been frustrating.
Good luck!
/Per

Little unclear about the border thing- you say it prints with a too wide border, but also say:
When I print the image with this set up, it still is printed without a border.
It's a factor of your printer, though; some can never print without a margin around all sides; this can be a border, or cut off. Good news, though; you can have a 5 x 7 borderless, or with any size border you wish if you print on larger paper, and trim to taste.

Leopard printing problems on several printers (Am I the only one?)

Since installing Leopard shortly after it was released, I've had flakiness with printing:
- With Tiger, when I printed, I could open the printer's window, and see the print job queued. The job would finish, disappear from the window, and everything would be fine.
- When the job was printing, the printer icon would appear in the Dock. When the job was done, the icon would disappear from the Dock. Simple.
With Leopard, printing has worked, but I have never seen a print job appear in a PrinterProxy window. I print, the printer outputs the job, and PrinterProxy is always blank. The printer icon appears in the Dock, and stays there forever. I found that I could ctrl-click on the icon and select the Auto Quit option (Hooray!), but that only worked for a while. Then the icons started staying in the Dock again. When I click on the Dock, there is no more Auto Quit option... just the "Application Not Responding" message. I have to force quit Printer Proxy after every time I print.
What's stranger is how long it takes for the PrinterProxy app to start up. The icon in the Dock bounces for well over a minute. Sometimes, the job finishes printing before the app is launched. If I switch between apps using Cmd-Tab, I can select the PrinterProxy app, but it never actually displays; instead, I just revert to the current window.
This is true for every printer I use, and as a traveling consultant, I use several. It is true whether I am printing via Airport, or over a direct Internet or USB connection.
The printers that are permanently in my Printer List are:
Canon i9100
Brother MFC-8840
Epson Stylus Photo 220
HP LaserJet 1320N
HP LaserJet 8800
HP LaserJet 6570
HP Color LaserJet 5550
Adobe PDF 8.0
All of these have the same problems. What's worse is, when I have a printing problem, there is no way to diagnose it, since the print jobs never show up in the PrinterProxy.
I have reset my printing system many times. I have deleted and re-added my printers many times. I have downloaded drivers from the manufacturer's sites, and reinstalled Leopard's default drivers. Nothing makes a difference. Strangely, after updating to 10.5.2, the Auto Quit problem went away for awhile, then returned spontaneously.
At the thread below, I show some of my system and crash logs from a prior discussion. Someone was helping me with the problem, but after asking me to post my logs, he seems to have dropped off the thread.
http://discussions.apple.com/message.jspa?messageID=7013209#7013209
I can't believe this problem is endemic to Leopard. I know many people who seem to use Leopard without any problems at all. (They even print once in a while!) And yet, as a fairly advanced user, I can't believe I'm the only one having this problem! My system is pretty plain vanilla, with no weird mods, hacks or apps. Pretty much just straightforward creative and productivity apps. I use it daily for business, so I try to keep all wacky stuff off of it.
There must be a solution, short of doing a clean install. Can anyone help? Are there PrinterProxy-related files I can delete when I reset the Printer System that might help resolve this? Prefs?
Thanks,
David

I'm having exactly the same problem with a Lexmark C760.
When I inspect the Activity Monitor while opening the Printer Icon from the Dock (or press the Button "Open Print Queue" in the "Print & Fax" System Preferences), I can see the Printer Icon as "Printer Proxy (Not Responding)" marked in red in the processes list. The Dock icon bounces for quite a while, and after about 2 minutes, a Printer List actually appears under the PrinterProxy application and the process in Activity Monitor changes its name to "(null)" and its color to black.
Though there is no entry in the PrinterProxy list when I print something from another application while keeping the window open, I can select "Supply Levels" and the correct information appears, so it seems to be functional.
It also seems that there are several copies of the drivers remaining, as the application in the Dock is named "Lexmark C760 (4)", probably from my attempts to remove and reinstall the driver. Is there some interference with old installations of the drivers that still lurk somewhere, hidden in the depth of the many libraries? How can I get rid of the previously installed drivers for good?

Printing problem - GCC Elite 12/600

Similar Messages

Maybe you are looking for