Printing problem in Excel after exporting from Deski report

Post Author: msanjeev
CA Forum: Desktop Intelligence Reporting
Hi ,
When I export desktop intelligence report and try to print that report it prints excel column and row numbers. Is there way where we can disable printing column and row numbers before exporting to excel. Problem occurs only when we export to excel from deski. Just printing from excel we can disable printing excel column and row numbers.Please any one answer my query
Thanks
Sanjeev

Post Author: GregPye
CA Forum: Desktop Intelligence Reporting
Not sure if this can be changed within DeskI options, but it can be changed within Excel. Go to File, Page Setup. In the Sheet Tab, there is "Row and Column Headings" check box in the Print section... deselecting this will stop these being printed.... I'm using Excel 2003...

Similar Messages

  • Problem opening excel files exported from Discoverer Plus 10.1.2.48.18

    I can't open excel files (xls) exported from Discoverer Plus 10.1.2.48.18 when I enable macros. The application (Excel) hangs up.
    Someone have any idea about this?
    Thanks,
    Diego

    Hi Meifang
    I did some more research and found a document on MetaLink 250820.1 that talks about Discoverer not being able to call Excel if Discoverer is running via an IP address instead of a qualified domain name.
    The article talks about making Discoverer a trusted site in the Internet Options of IE. Here's the relevant info from the posting:
    Workaround for MS IE (if necessary):
    1. Open a new MS IE browser
    2. Navigate to: Tools | Internet Options Security where you will see the Trusted Sites icon (green icon with a check mark)
    3. Click the Sites button
    4. Add the following: http://IP:port/
    (where IP, port are the location of where Discoverer server is running)
    5. Click the OK button
    6. Click the OK button again
    On my own PC, I was having a similar problem and I was unable to get Excel to launch. In the end I did this:
    1. Open a new MS IE browser
    2. Navigate to: Tools | Internet Options | Security where you will see the Local Intranet icon (computer icon against a globe)
    3. Click the Local Intranet button
    4. Click the Sites button
    5. Click the Advanced button
    6. Add the following: http://IP/ or http://website
    (where IP or website are the location of where Discoverer server is running)
    7. Click the Add button
    8. Click the OK button
    9. Click the OK button again
    10. Click the OK button a third time
    With this done, I made sure that my Explorer settings were correct by doing the following to ensure that a couple of settings for the .xls & .html file types are unchecked:
    1. Open Windows Explorer
    2. Navigate to: Tools | Folder Options | File Types tab
    3. Highlight the Extension XLS (or HTML)
    4. Click the Advanced button
    5. At the botton of the screen are three settings that use checkboxes. If either of the following two are checked, un-check them:
    Confirm Open after Download and Browse in same window
    6. Click the OK button
    7. Click the Apply button
    8. Re-boot the PC
    After I did this I was successfully able to get Excel to open from within Discoverer.
    Best wishes
    Michael

  • Problem with image after exporting from Lightroom 5

    Good day. Please can someone help me? I have Lightroom 5, and I have a problem in exporting edited images. At issue, do all the necessary settings and retreat noise and sharpness adjustment by brush adjustment tool, however, to export the image, noise and some minor adjustments are lost. Because in Lightroom visualize the way you wish, but after export, is not it the same? How do I get a different result? Thank you all!

    I have the same problem!
    Something got broken with my Lightroom 5.6 (Windows 7Pro)  two days ago and I don't see any adjustments made with brush after exporting photos!
    It's not a problem of library or RAW files - the same, work fine on other computers (iMac).
    I tried to clean the computer with CC Cleaner Tool, and install everything again, but it didn't help.
    I already lost 2 days trying to fix it, and I don't want to format the drive and install Windows again
    Can anyone help?

  • No Hyperlink in PDF after export from Crystal Reports 2008 SP2

    When I export a report from Crystal Reports 2008 Developer (as well as from the runtime) SP2 to PDF the Hyperlink to a file on hard disk is missing.

    Hi,
    Go through this LInk
    Re: No hyperlinks after exporting to pdf
    Regards,
    Salah

  • Filtering report in Excel after exporting from SSRS

    Hi All,
       I have created a basic report which has 3 groupings Region,Country and Cities. I have the measures as Total Amount and Total Quantity. I have also added Subtotals to all the 3 groupings. The users now want to export the report to excel
    and then filter on country or state or city. Say for example if i select the country as Region as East and Country as India and I select few cities, i need to get the subtotals and other details dynamically. The report needs to behave similar to the pivot
    tables created in excel.
    Please let me know how to achieve this.
    Thanks,
    Ram

    Hi,
    As far as understand from your Query, you can apply filters in the Reports based on Region , Country and City.
    Send these filters to your Query and accordingly the report will show up with New Subtotals.
    Check the link below if you are not sure of parameters.
    http://sql-bi-dev.blogspot.com/2010/07/report-parameters-in-ssrs-2008.html
    Regards, PS

  • Printing in Adobe Reader after exporting from InDesign gets cut-off

    I have exported a few documents form InDesign to PDF. When I print the documents, some parts get cut off (top section or bottom section) but there is still room on the paper. I'ts like the printer decides not to print those sections. I am printing on 5x7inch paper and all my documents show their sizes as 5x7inches.

    Turns out the issue was with Acrobat.
    See resolution here.
    http://forums.adobe.com/message/4496809#4496809

  • Cannot Open Excel File after exporting from Disco Plus

    Hi there,
    I got a question from one user having issue with opening Excel file after exporting from Disco Plus.
    The report has been using for a while and he is using Excel 2003 version and Discoverer 10g(10.1.2.2), he never got this kind of error before, just recently got error.
    After exporting from Disco Plus he saved file on his desktop and when he tries to open the excel it says "Cannot be Accessed, can be corrupted...." but this is not from network drive since he saved file on local desktop or C drive.
    Also not for all reports, only this particular report and only specific parameter, for example for parameter 2008 Feb opened successfully, but for2009 Feb he gets this error when trying to open excel.
    i tried in excel 2007 also , i dont think this is Excel version error, am not sure.
    Also after go live last week (we upgraded database from 9i to 10g) but i am not sure this causes ,since for one parameter working, for other parameter not working.
    Actually we should get one window for Macro when we try to open excel, but he is not getting it seems.
    Any ideas/thoughts on this would be greatly appreciated.
    Thanks for your help
    --skat                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Rod,
    Thanks for your quick response on this.
    Yes, we can export to other formats as well, but actually exporting is working, after saving the file on our local desktop/drive and when we try to open we get this kind messages or we cannot open the file, we should get message window for Macro to enable/disable but for this report we are not getting this either,
    Also this happens only for specific parameters,like i mentioned above it works I mean excel file opens for one set of parameters but for some other set of parameters cannot open.
    For example :- when we enter FEB 2008 it works, if we enter FEB 2009 it won't open the file.
    This is weird
    I am still working on this issue, may be better to recreate the report again might be helpful,
    Any ideas/comments/thoughts would be great
    Thanks
    Skat

  • PDFs dull in Acrobat after exporting from Indesign - again

    Hi folks,
    I am aware of a previous post which discussed this issue which was apparently resolved, but it appears to have reared its ugly head again. The problem - since updrading to Mavericks and the Creative Cloud, pdfs in Acrobat are very dull after export from Indesign and it is not a transparency blend or Indesign issue. I understand Adobe blamed Apple for not updating their colour management software and the reply from Adobe was:
    "We have found the root cause of this issue and are in process of providing a fix. Once this is done, we will test it to make sure that it works as expected and will release an update patch for all our users."
    I am running the latest version or everything but it appears to still be a problem. I have also uninstalled Acobat XI and tried earlier versions without success. I have a print job to send off tomorrow and I am very nervous about how this will print.

    Sorry about that, I apparently forgot to attach the file; have done so now.
    The method I'm using for creating outlines is simply to use the "Create Outlines" command under the Type menu within InDesign. Then I create my PDF files by using the Export command under the File menu and choosing the PDF/X1a option. 99% of the time I get perfect results, it's only when I try to make outline type that I encounter this problem. You'll clearly see the artifacts in question in the example attached.
    I don't know whether or not the press would have printed these artifacts, as you suggest, since no printer has been willing to execute a file that shows any anomaly in the proof process. I can't say that I blame them.
    Hopefully you will see what I'm talking about and can recommend a solution, though I like your idea of simply giving them a properly executed file and then telling them to get a life. It hasn't worked so far, as I unfortunately deal with a lot of Neanderthals around here, but I suppose it's worth putting forth again the next time this issue arises. It will.
    By the way, no print house of my choosing is this far behind the curve, if at all. These cavemen are always printers who have long-standing relationships with my clients, and for whatever reason (generally lowest cost I'm sure), the clients think they hung the moon. We, of course, no otherwise, but it does it profit a designer to tell his client he or she is crazy for using a printer who is a decade behind the technology curve.
    We cowboy up and seek solutions, eh?

  • Print problem in epiphany after upgrade

    I am having printing problems in epiphany after I did my upgrade.  It says epiphany book marks crashed, and it is collecting information to report the bug.  But then it closes everything.  Some pages work fine, but others do not.  Also, I can't choose to print a selection any more.
    is there any way to go back to the old epiphany, or get this one working right?
    Thanks

    HI,
    While in an Upgrade version the drawback of BDC is the screen names,
    number and sequence may change in the upgraded version as compared
    to the previous version.
    In ECC6.0 you again have to do the recording for the required transaction
    from T Code SHDB and then upload the data.
    Hope it helps,
    Regards
    Mansi

  • How to enhance the Excel export from Crystal Reports

    Hello,
    I am new in Crystal Reports and I wonder if it is possible to enhance the Excel export from Crystal Reports with post-processing that would be applied to the Excel exported file.
    By example, is it possible to freeze the window panes, so rows and columns are frozen in place on the screen?
    Is there any possibility to obtain the file exported to excel to work with.
    Or maybe there is some ways to parametrize the Excel export from Crystal Reports?
    Any suggestions are welcomed.

    If you are using Crystal Reports 2008 you can use the Report Application SDK that is now available.
    It has a object called PrintOutputController that has an export method that allows you to get access to the exported file before you send it to the user.
    Check the Developer library and the samples for details.
    <a href="/blog/10">Rob&#39;s blog - http://diamond.businessobjects.com/robhorne</a>

  • Problem in Excel after extracting data from SAP Report

    Hello,
    I have a problem with Excel file after extracting it from one of the SAP report.
    When my client extracted data from SAP in to excel he is coming across minus symbol on both sides of the number.
    for ex:        -447492177-
    When i extracted same SAP report in to excel i didnt face any such problem.
    Please share your inputs on what could be the problem.

    1. Make sure your client and you are using the same version of Microsoft Excel
    2. Let your client try to OPEN the exported xls file from a existed workbook instead of double-clicking the file directly.
    Atom

  • Printing from CS3 after export from LR2  (Mac OS X) blurry / undersaturated

    Hi all,
    New to the forum and it might be with a question which already has been answered but I really could not find it, so here's my try.
    Recently bought a Canon 50D and Pixma 4600 and started shooting pics (RAW) of my newborn kid. After importing and basic processing (WB, exposure, noise) in LR I exported pics to CS3 in various ways (TIFF 16 bit, DNG, Original file, different DPI, up to 500 etc.) and did some detail work over there.
    After printing from CS3 all pictures look slightly blurry, undersaturated and underlit. Did a lot of trying on all settings (IP4600 profile from CS3, saturated, relative. etc. etc.) and when finally comparing identical pics printed from LR and CS3, the detail and overall quality of the LR pics is much better.
    Any help would be greatly welcome as I cannot imagine being the first one with this problem and because I am convinced that it should be possible to print very accurate and brilliant images from CS3.
    Overview of equipment :
    Canon 50D
    Imac 20", 2.4 GHz 4 Gig memory
    Pixma IP4600
    LR 2.1
    CS3
    Thank you all for your help, understanding and kindness,
    Michiel

    I'm just going to say "wow", because this worked for me.  I was ready to chuck the printer out the window since I've tried virtually everything in every other single thread here, and nothing has worked. I had my doubts about d/ling the European driver, but it completely worked.Thank you!!
    Link that worked for me: http://esupport.epson-europe.com/ProductHome.aspx?lng=en-GB&data=zbff+oTjl0HU002FfEVcqCDa8 Tb+0FXpIU002FFritF2NBao5eIU003D&tc=6#35

  • Change Excel Layout exported from 0analysis_pattern

    Dear All,
      I would like to add some items such as user name, time, variable...etc to the excel after clicking on the "print to excel" button from standard web template(0analysis_pattern); Currently it's showing report name and exception only.
      Any idea?
    Points will be awarded.
    Thanks a lot
    Charlie

    Hi,
    The answer is very simple. You cannot use the old 0ADHOC web template. in the new BEx Web new templates must be used (the structure of the templates was changed).
    What you can make is to copy 0ANALYSIS_PATTERN and modify it to your needs. (see also forum: Add new chart types)
    Modifications can be done with the new Web Application Designer.
    For all other old templates you need to run migration (WAD -> Tools -> Migration Wizard). But on some advanced web templates it is better to rebuild it with the new functionality)
    Best regards, Karol Kalisz
    SAP BI Development

  • Saving PSD files after exporting from Lightroom saves incorrectly

    I've only recently moved to Lightroom from using Photoshop/Bridge together, so I'm not 100% sure how saving files exported from Lightroom should go. But here's what I experience:
    Base edit of file within Lightroom
    In library view, right click on image -> Edit in -> Open as Smart Object in Photoshop
    Perform all my necessary edits and such
    File -> Save As, and save it to another location as a PSD file (totally different HDD)
    Perform more edits....
    Shortcut CTRL+S to save, and it saves it as the TIFF file under the location it was originally in within Lightroom
    Eh...? Am I missing something. It should just save as the original PSD I created when I went "Save As". I have seen on a few occasions, immediately after "Save As", the file name resorts back to TIFF and not as PSD.
    My settings for External Editing in Lightroom are as follows:
    File Format: TIFF
    Color Space: ProPhoto RGB
    Bit Depth: 16 bits/component
    Resolution: 300
    Compression: None
    Does anyone have any ideas what I'm doing wrong? Also, to note, that sometimes I double click on the Smart Object within Photoshop to load Camera Raw and perform some edits, but not often.

    Modesto Vega wrote:
    Replying to your last 3 posts.
    Re Camera Raw being used to pass an image to Photoshop
    a) I am assuming this is independent of the Compatibility level in Preferences\File Handling DNG creation.
    b) Does the same apply to other photo editing software made by Adobe like Elements?.
    Reply: Yes, the principle is the same. Photoshop Elements cannot read raw data either. That's why it has to be converted before it's opened.
    c) Assume that I have LR 5.7.1 and CS5. Is Camera Raw is still used to pass an image to Photoshop? If so, why is there a need to get LR to behave differently?
    Reply: Camera Raw is used IF you choose the option to open anyway. Then Camera Raw will be used to convert the image that's opened in Photoshop. But since it is older than Lightroom some of the new adjustments might not be transferred to Photoshop. That's why there is a need to let the user make the choice.
    d) Sometimes it does seem as if Adobe might be using Camera Raw updates and process version updates to get consumers to change their habits, this includes having to buy subscriptions or having to change workflow to some ideal that somebody at Adobe or working with Adobe might have in mind.
    Reply: The fact is that in the past, when a new version of Photoshop is released then all support and updates cease for the previous version. Since the introduction of the creative cloud, at least users of Photoshop CS6  get support for new cameras. They just don't get the new features. Yes, there's motivation to upgrade. Adobe is a business. What do you really expect?
    Re stacks
    I find impossible to see collapsed stacks on the film strip. Stacks are only visible on the Library module and using a grid view; I don't say clearly visible because they are only recognisable by the label at the top left corner with the image count; I don't even think it is possible to change the colour of that label or the grey colour surrounding an image. Also I cannot name stacks. If I could name stacks, see them as virtual folders underneath a library folder and make them glaringly visible I would use them extensively.
    Reply: The only reason I can think of that you are unable to see collapsed stacks on the filmstrip is if you have the filmstrip reduced in size to the point that Lightroom can't display all the icons. I'm able to see the collapsed stacks in the library grid view and on my filmstrip
    Re storing your Raw files and processed files in separate locations
    Assuming Raw files are negatives and Photoshop files are transparencies or prints, would you want negatives being handled/read on a regular basis? If anything happens to your negatives, you would never be able to produce another print or another transparency again.
    Reply: The raw files or the negatives, as you put it, are never modified by Lightroom. They always remain in their pristine state they were in when they were imported. If I have a backup of that raw file then I can do whatever I want to the one in my working folder. Resetting that raw file so that it looks unaltered is just a click away.
    I have worked extensively with databases and database systems, it is a standard feature of database systems to be able to choose where to store different database objects. I don't see why LR cannot do the same, it is a database after all. I do agree with both the OP and photo.
    Reply: Well, I won't argue that point. If that's what you really want than lobby for it. It just won't get my vote because I don't see any real advantage.
    If you read back through this quoted message you'll find that my replies are included. I don't know how to separate them out so they are highlighted properly. Read through it and think about it. But personally, I don't want to waste anymore time on this discussion because it isn't accomplishing anything in my opinion.

  • Color change after exporting from Lightroom

    I noticed a drastic color change after exporting a file from Lightroom to a JPEG file today. I have been using Lightroom for a while, and it never happened before. I am assuming that I changed the setting somehow and I cannot find how to fix it.
    Here is the original.
    After exporting to a JPEG. The color is so drastically different. I tried both sRGB and AdobeRGB and they turn out to have the same problem.
    It is not as clear as JPEG files, but edited files with Photoshop CS5 also looks slightly different viewed on Lightroom.
    I would appreciate it if anyone could help me.  Thank you so much for your help!

    Thanks everyone for looking into my problem!
    >Can you upload a sample of each
    >* Raw File
    >* XMP Sidecar
    >* Exported JPEG
    I somehow can't find XMP sidecar files in my folders.... So instead, I exported the JPEG file to the 2nd JPEG file, hoping you can compare those two JPEG files.
    The colors get lighter and lighter every time I export the files. I uploaded those files (RAW, 1st JPEG, 2nd JPEG) on line. I also changed the file samples from the original post because I can't add watermarks.
    I checked my flles, but there is no preset applied to the JPEGs.
    I am thinking of unistallng Lightroom and reinstalling it and see what happens.
    Thanks!
    1. The data of the RAW file: http://yuko-hirao-photo.hechtmail.com/others/DSC00530.ARW
    2. Data of the GPEG exported from the RAW: http://yuko-hirao-photo.hechtmail.com/others/DSC00530test_upload_01.jpg
    3. Data of the JPEG exported from above JPEG: http://yuko-hirao-photo.hechtmail.com/others/DSC00530test_upload_01test_upload_01.jpg

Maybe you are looking for