Printing problem in HP LJ 1022 Printer in sharing

I'm able to print on the PC that has the printer physically installed, but can't get the others to print through the share. I'm having the same problem: print jobs show up, but would not print.

The page looks perfect in preview and as a PDF. I can't print from the PDF, however, because it shrinks the text and expands the margins ...
Something's fishy. Save as PDF should result a file that looks exactly, precisely, like what you'd get if you printed directly to your printer.
I suspect your Word document has been corrupted by a few bytes of random data that is causing your printer to go nuts. Try cutting that portion out of the document, and pasting it in a new blank document so you can incrementally isolate the damage.
This isn't going to be as easy as it sounds, because when the PostScript printer driver encounters the errant code in the Word document, it's essentially telling the printer "now, go to the top of this page, print a nasty black smudge, and then crash." You might have to cut a whole page before and after the suspected corruption. If you're lucky you might be able to cut the portion then paste it right back as "unformatted text". Try that.
BDAqua wrote:
I'm not familiar with Word,
We should all be so fortunate. Word does use the standard OS X Print dialog though.

Similar Messages

Printing Problem with HP LaserJet 1022 and OS 10.4

I am having a problem printing one page of a document on my HP LaserJet 1022 with OS 10.4. All other documents seem to be printing fine, but when I try to print one particular page of a 90 page WORD doc, that page consistently comes out with a big black streak across it and it does something to the printer because all the lights start flashing.
I have powered off, unplugged, reset the printer subsystem, reinstalled the printer driver, and even tried to print on my laptop, and the same thing keeps happening. The document printed for me fine a few weeks ago.
Any suggestions on a work-around for this or a permanent solution? I really need to print this page on my printer ASAP. Thank you.

The page looks perfect in preview and as a PDF. I can't print from the PDF, however, because it shrinks the text and expands the margins ...
Something's fishy. Save as PDF should result a file that looks exactly, precisely, like what you'd get if you printed directly to your printer.
I suspect your Word document has been corrupted by a few bytes of random data that is causing your printer to go nuts. Try cutting that portion out of the document, and pasting it in a new blank document so you can incrementally isolate the damage.
This isn't going to be as easy as it sounds, because when the PostScript printer driver encounters the errant code in the Word document, it's essentially telling the printer "now, go to the top of this page, print a nasty black smudge, and then crash." You might have to cut a whole page before and after the suspected corruption. If you're lucky you might be able to cut the portion then paste it right back as "unformatted text". Try that.
BDAqua wrote:
I'm not familiar with Word,
We should all be so fortunate. Word does use the standard OS X Print dialog though.

Printing problems after installing the Epson Printer Driver 2.16

Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

Printing problems with Lexmark Wi-Fi printer linked to iMac

We have a Lexmark X6570 Wireless printer. This unit works flawlessly with our MacBook Pro on the AirPort Express Wi-Fi system in the house, whihc was the first Apple computer we bought in September 2007. More recently, in November 2008, we purchased a second Mac, an IMac 24-inch desktop and linked it to the AirPort Express. The problem is that we cannot print via the iMac. Whenever we ask for a print of a Mail message, a Safari web page, an Adobe Reader page, a TextEdit page or a Pages file (when we are actually working on a draft), the application closes by itself and we get the following error message (for the Mail example): "The Mail application had to close unexpectedly. The problem could be caused by the IJPrintQuality module". By the way, the only time the printer actually printed from the iMac was when I open a saved Pages file. Then it prints OK and almost every time. But that is the only instance when the iMac prints from the Lexmark. We have spoken to Lexmark on numerous occasions and reinstalled all drivers and all Lexmark software on the iMac, but without success.

For those running into this same prpoblem, Lexmark foun a solution for me. If you get that error message, try to access your HD -> Library -> Printers -> Lexmark -> PDE's folder. Under that folder, locate the IJPrintQuality, then remove it. Then try to print again. If you get another similar error message, you may also have to remove three other plug-ins: IJAdvancedOptions, IJColorOptions and IJPrinterServices before the programs stops crashing. I am now testing the printing of different documents from different applications, and it continues to work well.

Yet another freaky printing problem: 10.3.8 and Printer Setup Utility

I'm hoping some really smart people can help me out here -- I'm not as good at Mac troubleshooting as I need to be!
I purchased Tiger a few weeks ago and the upgrade went fine and I was able to print, but then suddenly I can't any more. I have a PowerBook G4, running 10.3.8 and a HP 2710xi, which is a wireless printer (not sure of the proper term for this).
The symptoms: iCal crashes when I hit cmd-P. Other programs also crash upon printing. Some programs will bring up the print dialog, but it freezes up at that point. I tried printing to a PDF in Microsoft Word, and that crashed it. This problem persists in other user accounts.
Additional problem: Printer Setup Utility crashes whenever I hit the "add" button to add a printer. I have the crash reporter information if anyone wants it. Can't add any printer at this point.
What I've tried: I uninstalled the old software from HP and reinstalled new software. The HP installer can't finish running since it gets hung up by the Printer Setup Utility. I installed print-only drivers from HP. Same problem. I tried plugging the printer in to the USB to see if that makes a difference. Same problem.
Printer Setup Utility is recognizing my printer in all forms: as USB, Bonjour, and HP IP Printing. I just can't add it due to the program crashing.
Further troubleshooting: I ran all the maintenance and permissions repairs in Onyx. I used most of the diagnostic and repair tools in Printer Setup Repair, including Reset the printing system and deleting printer preferences. I reinstalled the 10.3.8 update from Apple's website.
I'm not sure what my next step should be: Do I reinstall the whole operating system? From my review of this board, lots of other people are having problems with Printer Setup Utility in Tiger.
Thanks in advance for any insight you can offer.
PowerBook G4 Mac OS X (10.4.8) HP Photosmart 2710xi

Have you tried starting up with the Install DVD, and then using Disk Utility (in the menus at the top, NOT in the installer) to repair the hard drive?
If you're going to show us any errors, use the Console to look at cups error log. Paste any line that starts with E, plus the 3 lines before it (they tell you what was happening).
If none of this is fruitful, yes, reinstalling is the next step.

Downloaded latest Reader for Mac and have had wireless printer problems. Either can not printer or it is extremely slow.

I downloaded the latest Adobe Reader for my Mach and I have a wireless Canon Printer. I have not had any problems with my printer until now. It will either not print or print really slow. Can not print any pdf files at all. Do I need to uninstall it or is there a fix?

Uninstall Reader. Is your printing back to normal? What version of Reader did you install under what OS?

Printing Problem -- Published as Landscape but prints as Portrait

Post Author: williamk
CA Forum: Publishing
Hello all,
I have a report that was created and published as a Landscape report. However when I go to print it from the Crystal Report ActiveX Viewer it wants to print it as Portrait. This problem seems to be intermittant. Sometimes and from some computers it will print correctly. Most of the time it wont. I went onto the Business Objects XI Enterprise Server and changed the Print Setup for the report to Custom Settings | Landscape | Letter, but it didn't help. Also, when it does print incorrectly I get this message:
Crystal Report Viewer
The report you are about to print is a pre-formatted image of the actual report data. Changing orientation or paper size may result in loss of objects on each printed page. Do you wish to continue?
Any ideas?

Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try printing again.
NOTE: For Mavericks and Yosemite, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

Printing Problem - Multiple pages won't print

I am attempting to print the inside pages of a wedding program using Pages '08. I have two printers - an HP 7580 and a Lexmark c544dn. I have elected file>print>copies and hit print. The Lexmark prints one copy while the HP shows only a red exclamation mark by the printer and will not print anything. Curiously, the outer page of the program will print multiple copies on the 7580. The inner back to back page (or more clearly, a portion of the program is on each half) is slightly smaller and the sizing has been adjusted accordingly and of course the page oriented to Landscape. This is about to drive me crazy because I can find no reason one section would print correctly while the inner pages won't. I'm sure there's some simple setting I'm missing But -- I'll appreciate any help to solve this puzzle

I'll bet you have an HP printer. It's a long-standing problem between Apple applications & HP printers, specifically AppleWorks & Pages (any version of either) & HP printers. I'll also guess that you have numbered your pages starting with a number other than 1. Try putting the specific page numbers in the print dialog. For example, if you have a six-page document but the pages are numbered 11 to 16, an HP printer doesn't know what to do. Tell it to print pages 11 to 16 & it likely will work.

Printer problem Canon MP170 "Failed to print document" error

I have a Canon PIXMA MP 170 printer connected to the airport express via USB.
I get the error failed to print document
I pinged the IP address and it is okay. I used Bonjour and Windows to configure printer and both do not work.
I can connect to my sterio with itunes to listen to music.
I asssume it must be with my printer driver are there any solutions for this problem?
Thank you.

Possibilities:
1. Your Acrobat and OS are not compatible (you did not indicate either). It may be you had an install that was working marginally and the update from MS did it in.
2. AcroTray is not running. Try printing to the Adobe PDF printer with the print-to-file selected. Then open the file in Distiller to create the PDF. If that works, check for AcroTray in the tasks list.
3. Do a Repair of Acrobat. Sometimes the windows updates seems to cause problems and a repair is needed.

Color printing problems: Single documents vs batch printing

I'm using a Canon C5250 to print 550 PDFs (15 at a time in batchs). The colors on the singly printed PDFs differ greatly from the colors on the batch printed documents.
I have created settings on my computer to manage the color, but the settings don't seem to apply to batch printed documents.
Thanks!

I am using Acrobat XI Standard. I realize now I'm probably on the wrong forum.
Once I open a folder with multiple (4-125) PDFs my selections are Organize, Burn, New folder
Once I select an individual PDF or multiple (up to 15) PDFs, my options are Organize, Open with Adobe Acrobat XI, Print, Burn and New Folder.
My problem is that the color I get when I select a group of 15 PDFs and select Print from the options that appear as described the color from document to document is inconsistent.
I can open each PDF, and even a group of PDFs, and print them singlely and I get the correct color--time after time. Repeating this process 550 times for the set of reports that I print is not the desired process.

Printing Problem from Citrxi to Local Printer over a WAN

Hello,
We have a rpinting issue , here are the details:
R3 4.6C on Windows Server 2003
SAPGUI runs on Citrix
A user iopens the SAPGUI on citrix , the sapworkdir is located on her Home Folder (H:), she has full
permissions to that folder.
When she prints to a printer that is defined in SPAD - it prints without a problem.
When she prints to an LPT1 printer attched to her computer - it doesn't print and the following error appears on the SAPLPD console window:
Number of processors: 4
lcon DLL loaded.
SAPLPD Version 6.29 for Windows/NT [OPT] is listening
One shot printout of file .\lprint0000000001.tmp, printer __DEFAULT
Job .\lprint0000000001.tmp [raw] started on printer CLIENT/MIS0025845#/ELTA
Open failed for file .\lprint0000000001.tmp
Can not unlink file .\lprint0000000001.tmp
SAPLPD terminated
Is anyone familiar with this error ? She has full permissions on her SAPWORKDIR directory....
Any help is appreciated.
Thx
Adi

Along with Chen recommendations; Please make sure that Printer is configured on CITRIX desktop.
You can set up the Printer in the following manner::
1.START>SETTINGS-> PRINTERS and FAXES.
2. Click on ADD Printer and Click on NEXT
3. Select LOCAL PRINTER ATTACHED TO THIS COMP and make sure that AUTOMATICALLY DETECT is not selected and Click on NEXT
4. Select Create a New port and select Standard TCP/IP port and Click on Next
5. Enter the IP address of the Printer and also give the Port name
6. Click on next again (no need to change in this screen)
7. Printer info will be displayed. CLick on Finish.
Check in SU01 if LOCL is given as the Default device.
Regards!
Deep!!

Printer problem Photosmart 5512- will only print colors

Hi. My HP Photosmart 5512 will print only the colors, not black. I've installed a new cartridge (old one ran out) and it still won't print in black, only in the colors. I've done everything I can think of, taken it in and out several times, checked to make sure it looked just like the old one, ink stains a tissue when I touch the "hole", turned it on and off. ??? Why is this happening? The printer is only about a year old and I've installed several black cartridges before with no problems. Please help and thanks.

Hi reloading1
I understand you changed the black cartridge and can't print in black.
I have included a document for checking the ink levels, making sure the vents aren't clogged and how to clean the printhead. The printhead is permanent on this model.
This document provides how to manually clean the cartridge contacts. Click Here.
Print a diagnostics page by going to Solution six: Print and evaluate a Print Quality Diagnostic Report to see if it will print in black. Follow the full document also.
Are you using Genuine HP Cartridges?
Check the date on the cartridges to make sure they are still in warranty. (not old stock)
What are the ink levels?
Did this issue occur before installing the new cartridges?
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Printing problems to ir C2880 canon printer!!!!

Hi There,
I have a MacBook Pro OS X Lion 10.7.5 I have recently installed the ir C2880 drivers for my Mac and everything "Seems" ok but when i go to print it just prints gibberish. Any clues on how i can fix this.
When I installed the printer i put in the network location and it automatically detected it as a "Generic Postscript Printer" however if i change the driver it no longer prints.
HELP!!!

OK, well, you're going to want to do yourself the favor of learning color-management.
LR is forcing a crash course in color-management on a lot of people.
Given that no one in their right mind could sit on these forums and advise every person separately (this is why books are written!), please buy and read Andrew Rodney's book on Color Management:
http://www.amazon.com/o/ASIN/0240806492/ref=s9_asin_title_1-hf_favarpcbss_2238_g1/002-5656 922-7269656?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-1&pf_rd_r=0PHJJ3YFG5YS9S8B1QWR&pf_rd_t=10 1&pf_rd_p=278240701&pf_rd_i=507846
If you want to learn a little about the color problems that people have attributed to LR but is actually attributed to non-understanding of proper color-management, you can check out this thread, and my posts to it:
http://www.adobeforums.com/cgi-bin/webx?128@@.3bc35205
Finally, lots of people have been having trouble with printing in LR. Myself included. I haven't even solved my problem yet. But here's a thread where some people have solved their problems:
Rishi J. Sanyal, "Print quality - good, bad or indifferent? Your opinions sought." #55, 25 Mar 2007 4:22 pm
Finally, I really hope you like reading... because you have a lot of it ahead of you :)
Cheers,
Rishi

Printing files to HP laserjet 1022

I have had problems with printing to a HP laserjet 1022 printer ever since I installed Snow Leopard. I did not have any problems with printing under Leopard.
1. Now whenever I try to print a word document or a PDF document, it would print only odd number pages and skip even number pages. Only very rarely does it prints all the pages without skipping.
2. When a document finishes printing, sometimes it is not cleared/dropped from the print queue, so that when I send a second document to the printer, it starts to print the 1st document again. I have to manually delete the 1st document to prevent it from printing again.
I have tried to download and install the latest printer driver for this printer from HP, but it does not seem to solve the problem.
Thanks.

There was just an update of HP printer drivers the other day.
http://support.apple.com/kb/DL907

HP Officejet100 Mobile L411a intermittent Bluetooth printing problems with PDF files

Hello,
Our company provides computer-hosted medical devices controlled by an application running on Windows7 computers we supply. We are currently using the HP Officejet 100 as a Bluetooth printer. In some of our customer offices, we experience printing problems using the printer in Bluetooth mode (there are never problems if the printer is connected by a USB cable.)
The printing problems typically affect PDF files printed through Adobe Reader 10, and the symptom is one of the following:
Send a print job to the printer. It doesn't print and eventually the print queue shows an "Error Printing" message. If any print jobs are removed and the printer is power-cycled, the problem goes away for the time being.
2. Same as above but power-cycling does not cure the problem and nothing will print, even a test page.
In either of these cases there are no problems if a USB cable is used.
The PDF files we are trying to print are typically 5 pages with 3 of the pages having a lot of graphics and the remainder being text only.
Has anyone seen this behavior and is there anything we can do about it?
Thanks.

I don't anything about this printer, but I do know that bluetooth is really flaky with large files since it's got a crappy transfer rate, could be that the transfer is dropping and freezing the printer up. Does it have encryption turned on?

Printing problem in HP LJ 1022 Printer in sharing

Similar Messages

Maybe you are looking for