Printing problem in SD-DIVERSION ORDER

Hi all,
I wanted to print a diversion order rather than a CREDIT MEMO ,although the document says "credit Note" on it.I want the printing as diversion order.
Regards,
kishorekumar.J

No answer

Similar Messages

  • How do I find offending photo when there is a problem uploading photos to order prints?

    How do I find offending photo when there is a problem uploading photos to order prints?

    What is the problem? What version of iPhoto? Of the OS? Try safe mode
    LN

  • Purchase Order Printing problem

    Hi All,
    I am printing a zform of medruck for purchase order.its working fine and the output is as shown below
    Order 4500045698
    item            Qty          Price             Date
    10               1,000       $5.50             03/28/2008
    But when i c the print preview for other purchase order its output is different as shown
    order 4500045699
    Item            Qty         Price             Date
    10               1.000      $5,50             28.03.2008
    Instead of comma in qty its howing dot and vice versa in price also the date format is changed.its only for a particular PO
    could anybody tell me why it is happening/
    Regards
    Lalit

    hi,
    please check your user setting.
    in menubar got
    system -
    > user profile -
    > owndata-->default (tab)decimal notification
    From menubar go to system then from their user profile then owndata and from their use the default tab , in the default tab u find the decimal notation change the decimal notification.
    Regards.
    Praveen.

  • Production Order Confirm/Label Printing problems

    I am currently having issues printing out labels for production orders.  Whenever I confirm an order, our printer will print out a different quantity or no label at all.  
    Here is a brief history of production order confirmations today....
    Entered                Printed
    80                           40 (2 labels of 20)
    20                           No Print
    20                           No Print
    40                           No Print
    ALL confirmations were accepted by SAP
    SAP WILL often drag during a normal confirmation when correct labels are printed
    SAP will NOT drag when a confirmation is entered and no labels are printed
    Yesterday I had a confirmation for 10 print out a label for 19.  All of the quantities in SAP are correct, it's only the printer that is creating labels for different quantities.  If all the lot sizes in SAP are correct, what do you think the issue might be?

    Hi,
    Based on what i understand of your query, would suggest to work with your technical person to have a look at the print program. The delay you notice or the incorrect data being printed might have to do with the program.
    Regards,
    Vivek

  • HP Officejet Pro 8600 Plus "unspecified printer problem"

    I just set up my HP Officejet Pro 8600 Plus e-All-in-One.  The set-up seemed to go okay, but when I go to the "devices" tab for "HP Connected" it has a yellow yield sign and says that I have a problem with my printer.  When I click on the yield sign symbol, the box says that "An unspecified problem was reported. Please check your printer."   When I check the printer pannel, there are no problems reported.  The machine seems to print okay, but I'd like to clear up this error that is shown.  Any ideas?
    Also, I've already done the restart and sign-off/sign-in stuff, so we can move on to second-order trouble shooting.  Thanks.
    This question was solved.
    View Solution.

    HELP!
    I am having exactly the same problem. I am simply swapping out an existing Deskjet 3512 that worked perfectly at all levels, so i KNOW i dont have router/port/network issues. eprint was and is flawless. I just plugged it back in to check and it still works just fine with eprint.
    Using my new Pro8600, I send emails to my eprint address and they seem to go...and then nothing. they just don't print.
    I get the"Officejet Pro 8600 Plus "unspecified printer problem"" message but my front panel reports no issues.
    I'm a step away from taking this back and buying an Epson.
    My experience with their support has bee stellar at a commercial printer level.
    This seems to be a very common problem and I just dont have hours to monkey around with something that should work out of the box.
    any help will be appreciated.

  • Problem in one Purchase order

    Hi
    I am getting problem in print preview of one purchase order while all the other PO are working fine. The error that is displayed when i go for print preview of this PO using ME23n is 'No Authorization for output device 14' . Its log also shows that Field 14 doesnt exit in form.

    Hi Yogesh,
    http://help.sap.com/saphelp_nw70/helpdata/EN/c7/58c902e5bf11d18e2b0000e83dd9fc/content.htm
    Regards,
    Sravanthi

  • How can we print the Stock Transfer Purchase Order

    Hi,
    How can we print the Stock Transfer Purchase Order??
    Because from Transaction ME9L & ME9F, we can print simple PO's like NB, MPR etc..but Stock Transfer PO could not print.
    Plz guide, from where we can do it...

    Messages for PO are set in MN04. For details on how to follow this link:
    Re: Problem with PO output determination MN04
    Once the record is set here you will see the records in ME23n under messages button in header.
    Edited by: Afshad Irani on Apr 30, 2010 10:09 AM

  • Printing problems with Adobe SC3 on iMac 27"

    I have a printing problem: When I want to print something from any of Adobe CS3 applications they suddenly crushes. I work on new iMac 27” (Intel Core i5, 3,2 GHz, OS X 10.9.2). Adobe CS3 worked correctly on my previous Mac G5.

    Mylenium, thanks for replying!
    All Adobe Standard products I have: Illustrator, InDesign, Photoshop make problem with printing.
    When I get an order to print a page either on my Epson Stylus printer or PS printer application crushes.
    Dario Apostol

  • G3 Pismo Powerbook and HP Deskjet 3325 Printing Problems

    The problem is that the Deskjet fails altogether to print sometimes. The error message tells me to allocate more memory to the printer. I do so but this does not help at all. I have 128Mb virtual memory turned on in addition to the built-in RAM of 128Mb.
    Might the problem simply be lack of RAM? There does seem to be plenty of memory available if I look at ‘About this Computer’
    In order to try and solve this problem, I have updated
    OS 9.1 to 9.2.1 to 9.2.2 successfully
    downloaded and installed the latest printer driver v.6.4 from the HP download site
    I now have two options, among others, in the left-hand window of the Chooser:
    The old printer driver called something like Deskjet 5.3 and the new printer driver called Inkjet 6.4
    If I select the former, which is what I always did in the past, the Deskjet 3325 printer appears in the right-hand window of Chooser, I select it (with AppleTalk inactive) and then the document sometimes, but sometimes not, prints OK.
    If on the other hand, I select the Inkjet 6.4 driver in the left-hand window, no printer at all appears in the right-hand window. If I just continue from here and give the print command inside, for example a Word document, the print dialogue appears, I click on print, but am then told that I have selected a model called HP 6670, which is the wrong model of printer, and must therefore select the right model. The Inkjet Printer Utility does not offer me the option of selecting the right model viz the 3325, or indeed any model.
    It may or may not be relevant, but I have Word 5.1 and Word 98 on the G3. Printing problems seem to occur far more with Word 98 than Word 5.1.
    I would be most grateful for any help. Thanks.
    Nick
    G5 iMac   Mac OS X (10.4.6)  

    Well. I'll answer my own question in case anyone is interested.
    Uninstall the HP printer drivers.
    To do this, delete all references to HP in the Extensions, Disabled Extensions, Preferences and Startup folders, all of them in the System folder, by selecting them, dragging them to the Trash and emptying the Trash.
    Then do the same with all references to HP items in the Applications folder.
    Download and reinstall the most-up-to-date printer driver avaialble for your printer from the HP website.

  • Troubleshooting Leopard printing problems

    Leopard printing problems fall into several categories
    a) Faulty or missing Leopard print driver
    b) Faulty implementation of the print command from the active application
    c) Faulty equipment, eg printer, cables, etc
    d) Faulty networking/sharing
    e) Faulty or incomplete software installation
    The fact that a driver is included with Leopard is no guarantee that it will work. I have heard it from HP's tech staff that several of their drivers installed with Leopard are malfunctioning and I expect that many other printer manufacturers rushed out some poorly tested drivers in order to meet Leopard's shipping deadline.
    Equally, some non-Apple applications have not yet properly tested their print command under Leopard so they cannot be used to reliably test whether a print driver is working or not. To get a more reliable indicator, save a print job as a PDF and then open the PDF in Preview and print it from there - or print a simple text page from TextEdit.
    Also be sure to check cable connections carefully and if possible, try a different cable to make sure that this isn't the cause of printing problems.
    Networking/sharing is fraught with pitfalls especially if the network is wireless. If possible, check printer sharing over a wired Ethernet network. There may also be issues when the print driver is not the same version on all computers in the network. To ensure that there are no remnants of a previous driver it's a good idea to completely uninstall previous drivers and then reinstall the most recent driver. To do this (for example on a 10.4 system):
    1. Delete the printer by opening Printer Setup Utility, highlighting the printer if it is listed and clicking on the Delete button.
    2. Clear the printer folder by navigating to Hard Drive/Library/Printers and dragging the offending printer-specific folder to the Trash.
    3. Clear the Printer Preferences by searching in the System for "com.apple.print" and dragging all files so named to the Trash.
    4. Empty the Trash
    5. Repair Disk Permissions
    6. Download the latest drivers for your printer and install.
    7. Open Printer Setup Utility and if the printer is listed, highlight it and press the Delete button at the top of the window. Then click the Add icon, single-click the name of the printer and click Add so that the printer appears in the printer list.
    8. To check that it works, create a test page in TextEdit, configure the print job in the Print window and print.
    Simon

    When you post unmark as a question in the header. If you missed your opportunity, just hit solved.

  • Printing Shop Papers from Maintenance Order Urgent !!!

    Hi All,
    I am in need of Printing Shop papers from Maintenance order , i know that the configuration of this thing is done through SPRO
    Plant Maintenance and customer service ->
    Maintenance and Service Processing -> Maintenance and Service Orders -> Print Control -> Define Shop Papers, Forms and Output Programs
    , but i want that when we give Print command through Maintenance order a smartfrom should trigger which i have developmed.
    My problem is that i am not able to configure the Print control for SMARTFORMS.
    What to do , Please suggest.
    Regards,
    Rachit Khanna

    Amol,
      Standard config doesnt provide the functionality to set the default selection dependant on PLANT. You will have to get the help of developer to do an implicit enhancement (Only If you are in ECC 6.0) to accomplish the same.
    Reagrds
    Narasimhan

  • Lightroom 2.1 upgrade printing problem

    I was getting great printing with LR 1 and my Epson R200 printer on Windows XP. My computer died and the new one is on Vista. I upgraded to LR 2.1 while I was at it. now my prints are way off color. I love the new color management features of LR, but there doesn't appear to be a Vista profile for the R200. I tried the one for the R300 and the prints have a decidedly yellow cast, which I can't seem to remove in LR. With the printer managing the color, the prints come out way too dark and weird colored. I need to finish some print orders, any ideas?
    Thanks,
    Dave

    LR 2.1 Final still has the problem of 'sunburned faces' and other somewhat less noticable color shifts on my system.
    Win Vista Ultimate x64
    Q6600 @ 2.4GHz 8GB RAM
    B9180 Printer
    Advanced Photo Glossy profile
    Application manages color
    The same images using the same printer settings on the same system print just fine using Photoshop CS3 and Photoshop CS4 so the problem is definitely in something specific to LR.
    And I have reported this to Adobe via http://www.adobe.com/go/wish and I suggest that anyone having printing problems with LR2.1 file a bug report.

  • Mac printing problems

    I printed from my mac just fine and then I went to print a spreadsheet and the printer looks and sounds like its printing but there is nothing there. I tried different things and have established that my printers are fine. The problem seems to be on the mac.
    can anyone advise please
    thx

    mollymoo2010 wrote:
    I have just triedprinting an email. All I get on the printed sheet is
    From:
    Subject:
    Date:
    To:
    Cc:
    Nothing else. As both printers are doing identical prints I guess it is something the Mac is telling them to do
    Or not.
    Assuming your ink cartridges are in the correct order/positions, and you haven't select white as a font colour, this is a bit of a mystery.
    But as it prints something, it is a printer driver/printer problem, or the cables they are connected by.

  • Airport Extreme Printing Problem with HP Deskjet.

    Hello ... I wonder if any helpful folks can assist me with my printing problem? I am using Tiger on a new Intel imac with a HP Deskjet 960C. This printer is listed as having the latest drivers included within Tiger and works perfectly when connected via USB so my problem I guess is not with the software....I have disconnected everything and plugged everything back together again. I also deleted the printer from the printer list within the Printer Setup Utility application.... The imac recognisies the printer and upon pressing the print button everything feels as though its just going to work. The blue barber shop scroll appears but the printer fails to kick into gear and I get the big red exclamation mark appearing in the status box .... I would really love to try and sort this annoying error ... Any ideas? Thanks. Book G4   Mac OS X (10.4.4)  

    Hello jds17. Welcome to the Apple Discussions!
    Unfortunately, not all USB printers are compatible with AirPort base stations.
    Take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
    o 802.11g AirPort Extreme Base Station (AEBS) or AirPort Express Base Station (AX)
    o 802.11n AirPort Extreme Base Station (AEBSn)
    If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also, you may find the following Apple article helpful.

  • Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

    Not printing text only on Canon--grahics print ok.  Not printer problem.  Prints ok on a Brother and another network Apple prints ok on Canon.  Believe a computer setting was inadvertently reset.  What setting and how do I reset?

    Without your printer model numbers, readers can only give you vague general directions.
    System Preferences > Print&Fax > ...
    ... shows a list of all set-up printers.
    If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
    Mac OS X 10.6 Help: Resetting the printing system

Maybe you are looking for