Printing Problem Mavericks

Hi
I have just changed my router from Netgear N900 to Netdear N600
I have an Epson xp-30 printer connected via usb cable to my main imac computer  Printer sharing is on.
I have another Imac in another room that i have previously used to share this printer
Since the router upgrade i cannot even see the main printer on my other Imac and therefore cannot add it or print
Could this something to with my change of router  It was printing before the change. Now i can only print from main computer. Cannot share it.
Running Mavericks 10.9.4
Any help appreciated
thanks

So the printer is connected via USB to the iMac and you are attempting to share the printer with other computers in the house. First can you print via USB to the printer from the iMac, if not then reset the printing system per Apples instructions in Mac OS X: How to reset the printing system and then report back with whether the printer works with the iMac.

Similar Messages

  • Officejet Pro K5400 printing problems after update to Mavericks OSX 10.9

    Hi,
    I have printing problems with my Officejet Pro K5400 after update to Mavericks OSX 10.9.
    Now after printing 1 page the printer prints an extra page with '2345X' sentence on it. As this problem started right after updating, I suppose there is a problem with an update.

    This patch did solve our problem with the K5400 feeding a "blank sheet".
    Thank you.

  • Maverick Mail Printing Problem: prints email header on separate page from body of email.  Why?!

    Maverick Mail Printing Problem: prints email header on separate page from body of email.  Why?!

    For what it's worth, I can report exactly the same problem.  I just recently converted from Outlook for Mac 2011 to Mail.  I did the conversion while running Yosemite.  I like pretty much everything about Mail EXCEPT that it take 2 pages to print a 1 page email!!  The header appears on the top of p.1, followed by a blank space.  The message begins at the top of p.2.
    If you scale it down, you can get the message to begin to appear on the bottom of p.1, but clearly, Mail is inserting BIG SPACE between the header and the message.  Changing the display fonts for Mail had no apparent effect (except that the font DID change, of course)....still a BIG SPACE between the header and the message. 
    Coming to Mail for the first time, I would have assumed that this was just a quirk of Mail, but am I understanding that some of you Mail users out there USED TO NOT have this problem??  I think it's pretty clear that it's Mail that's causing the problem, not the message, because I went over to my old Outlook and printed the same couple of messages with no such space between the header and the message.  So Mail is inserting a space into the print formatted email message that is NOT there in Outlook's print formatted same message.
    Be really nice to get rid of this problem, but my Apple Care free support has expired.  Not sure I want to pay for something that's generic to Mail!!  Anyone else made any progress on this?

  • Just upgraded to Mavericks and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported.  Is there a way to use my HP6100 Printer with Mavericks?

    Just upgraded my 2009 iMac (3.06 Ghz, core 2 duo $GB 1067 Mhz DDR3) to Mavericks OSX 10.9.5 and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported.  Printer says the software was improperly installed. Is there a way to use my HP6100 Printer with Mavericks or do I need to go back to Mountain Lion or Snow Leopard? 

    It's not clear whether your printer is included in the Apple list - there is an Officejet 6100 and a couple of other types. Go to the page linked to above and use the browser search for 6100.
    I'm afraid HP are notorious for not supporting older printers - I had the same problem. Probably they hope you will buy another printer (I did, but it was a Canon). I did look on HP's site and couldn't see a driver - you could give it a try (make sure you have the exactly correct printer name):
    http://www8.hp.com/uk/en/support-search.html?tab=1#/qryterm=HP6100&search_search type=s-002
    Alternatively ou could try Gutenprint (open source software):
    http://gimp-print.sourceforge.net/MacOSX.php
    I found it would indeed drive the printer, but the colour dithering wasn't very satisfactory and the duplex printing bolt-on wouldn't work. However as Gutenprint is free it's worth trying to see if it's any good for you.

  • Printing problem with cc and cs6 with epson 7890

    Hi everyone,
    I am having a serious printing problem. I use CC (14.2.1) and CS 6 (13.0.6) on Mavericks 10.9.1 on an iMac. If I try to make a print on a 24" roll I get an error message: cupsRasterinterpretPDD has an error = page header unsupported values. If I print A2 or A3 sheets everything works fine.
    I contacted Epson because I thought it was a printer problem, but they insist it is a photoshop problem. I updated to the latest printerdriver.
    Does anyone have any ideas or even better a solution?

    I feel your pain, but I don't know the solution, sorry. Our Mac guru who primarily serves designers is not upgrading any of his clients to Mavericks so far, due to printing (and other) issues. Se we're still on 10.8.4 here.
    This might help:  http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03967522
    Or this:  https://discussions.apple.com/thread/5546441
    If those don't help, you might want to post your issue in the Apple Support Communities:  https://discussions.apple.com/index.jspa
    Good luck.  :+)

  • Same old...no printer with Maverick?

    I have two Brother printers.  My applications see both.  A tiny hint might be that they are both listed as Generic Postscript printers.  Neither prints and only teases that they might.  My Print Queue says "Job Pending on Server."  I deleted the previous job that stopped at this point, Downloaded new drivers from Brother that are specifically for 10.9.1, installed them, restarted both iMac (brand new) and printer and invoked 'Print' again with the same outcome. "Job pending on server.'  There are no other jobs waiting in queue. To further this dilemma, the new iMac is set up to share the printer with another iMac on our network.  The other Mac sees the printers also, but nothing happens.  When I asked the iMac to give me an update on the 'supplies' for the Brother and 'that information is not available' which suggests that the iMac and printer are somehow avoiding a critical handshake of some kind. 
    Oh, and as with all the other problems associated with Maverick, the replaced iMac printed with no problems and shared the printers with no problems.
    Everything has been updated through software update.  Oh, yeah...the printers run through an Airport Extreme.
    Since the problem seems to be across manfacturers, has anyone been able to narrow the possible problem?
    Thanks.

    I have not solved my Brother/Mavericks printing problem - which is "printer in not connected" message.
    OS 10.9.1
    Brother DCP 8045D
    Deleted Brother printer and Brother folder in Library/Printers
    Reinstalled latest Brother print drivers.
    Added the printer back.
    Still having same issues.
    Has to be Mavericks 10.9.1 update; printing is different as Brother was always reliable in 10.9
    s

  • Airport Extreme Printing Problem with HP Deskjet.

    Hello ... I wonder if any helpful folks can assist me with my printing problem? I am using Tiger on a new Intel imac with a HP Deskjet 960C. This printer is listed as having the latest drivers included within Tiger and works perfectly when connected via USB so my problem I guess is not with the software....I have disconnected everything and plugged everything back together again. I also deleted the printer from the printer list within the Printer Setup Utility application.... The imac recognisies the printer and upon pressing the print button everything feels as though its just going to work. The blue barber shop scroll appears but the printer fails to kick into gear and I get the big red exclamation mark appearing in the status box .... I would really love to try and sort this annoying error ... Any ideas? Thanks. Book G4   Mac OS X (10.4.4)  

    Hello jds17. Welcome to the Apple Discussions!
    Unfortunately, not all USB printers are compatible with AirPort base stations.
    Take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
    o 802.11g AirPort Extreme Base Station (AEBS) or AirPort Express Base Station (AX)
    o 802.11n AirPort Extreme Base Station (AEBSn)
    If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also, you may find the following Apple article helpful.

  • Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

    Not printing text only on Canon--grahics print ok.  Not printer problem.  Prints ok on a Brother and another network Apple prints ok on Canon.  Believe a computer setting was inadvertently reset.  What setting and how do I reset?

    Without your printer model numbers, readers can only give you vague general directions.
    System Preferences > Print&Fax > ...
    ... shows a list of all set-up printers.
    If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
    Mac OS X 10.6 Help: Resetting the printing system

  • Crystal report printing problem in Malayalam

    Hi,
    I have a printing problem in Malayalam in crystal report.The viewer displays the correct font but the printed output displays the square boxes.I have installed the font.I am using Visual studio 2010 and crystal report 13.0 version.what could be the problem???
    please help me...!!!

    Hi priyashekar,
    I’m afraid that it is not the correct forum about this issue, since this forum is to discuss Visual C#. You can post your question in the
    Crystal report forum: http://scn.sap.com/community/crystal-reports-for-visual-studio/content?filterID=content~objecttype~objecttype[thread]
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

    After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
    Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
    Problem:
    - New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions. 
    - When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi. 
    - The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install). 
    Solution:
    1) Install Canon Printer Drivers and Software (from official Canon site)
    Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
    Canon 860 Series Drivers & Software  for OSX 10.8 Mountain Lion:
    The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
    1 Printer Driver
    (Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
    2 Scanner Driver
    (Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
    3 Network Tool
    (Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
    Canon Software for using advanced printing and scanning functions (while connected to network)
    4 Solution Menu
    (Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
    5 MP Navigator EX
    (Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
    6 Easy-PhotoPrint EX
    (Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
    Canon Support (HK) – check your local site
    http://www.canon.com.hk/en/download/main/index.do
    Select Product and drivers from support site eg http://support-hk.canon-asia.com/
    1. Choose a product category
    Multifunctional Printers
    2. Choose a product series
      Pixma
    3. Choose a product model
      Pixma MX868
    4. Choose type of document
    Downloads or FAQ
    If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
    2) Check Canon Printer and Software Working while connected via USB
    Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB.  Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’).  This is normally done as part of the automatic install but worth double checking
    3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
    After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
    Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
    DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list).  The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
    You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
    If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List.  It should say WLAN Active, identify the SSID and have an IP address
    If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

    Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

  • Print problem. trying to print a document in Preview, the start of the text prints half way down the page not at the top of the page?

    Print problems.  Printing out an email the text starts half way down the page.  I tried taking a picture of the text I wanted to print, tried to print from Preview and have the same problem.  If anyone has any ideas I would really apreciate it. Thanks Penny

    One more thing to check:  System Preferences/Print & Scan.  Make sure your printer is set as Default.
    I'm using OS X 10.8 and I don't see Page Setup anymore. If you have access to Page Setup, check to see if there are any adjustments to make there.

  • My "fix" to print problems in LR (using MS XP)

    Having had the same problems printing from LR as many others are complaining about, I thought that I might give my 2 cents to what I did to solve (?) the problem. I have to run with current setting in a while to be convinced that it is not just an intermittent fix though ;-)
    My problem when printing from LR was that the print came out much too Cyan-Green and somewhat dark when color management where handled by LR. When the same photo was exported to PS Elements (PSE) in Tiff with the Pro-photo color profile embedded, adjustments from LR, and printed using the same driver setting and color management, the print came out fine.
    I must mention that I have had fine printout in previous LR versions but I'm not sure when the problem started. But at least from LR version 1.3, 1.3.1 I have had problems printing a proper print.
    As I'm not 100% sure what caused the fix, I don't want to leave much info un-documented, so I start by describing my system etc.:
    - Athlon 64 3500+ with 2 GB RAM
    - Lacie 119 LCD monitor (calibrated with a ColorVision Spyder 2)
    - Epson Stylus Photo 890 printer; an old (6-7 years) 6 color dye-sub printer, but it can still produce very good prints. (It is BTW, the A4 printer version of Epson 1290).
    - Microsoft XP service pack 2
    - Adobe Photoshop Lightroom 1.3.1.
    - Adobe Photoshop Elements 5
    - Latest Epson 890 printer drivers ver. 5.21/P (from 2004)
    - ICC profiles for various Epson printer paper
    - Paper used: Ilford Printasia Photo Glossy Paper (but I have tried Epson Premium Glossy Photo Paper as well with same results)
    I used following setting:
    - In printer driver: "No color management" was selected
    - LR and PSE color management; printer profile: Epson Stylus Photo 890 Premium Glossy Photo Paper, Rendering Intent: Perceptual
    . LR Print sharpening: High
    - LR Print resolution: 360ppi
    When the photo was opened in PSE and I had printed a small print with above mentioned printer driver/color management settings. The print looked good, but with a little magenta color cast, so I thought that if I used a different printer profile this might help (I have no ICC profile for the Ilford paper). So I chose the "Epson Stylus Photo 890 Photo Paper" instead and printed again, and this time the photo looked as it did on my calibrated monitor. I have to admit I was a bit delighted even though it was from printed from PSE and not from LR, but seeing that color management worked in other applications was a relief.
    In PSE, I also I tried changing to a different Rendering Intent before changing printer profile, but with no success.
    Another thing that helped further was to change Media Type in printer driver from "Premium Glossy Photo Paper" to "Photo Paper".
    After the print success in PSE I went back to LR and changed the Printer Profile to "Epson Stylus Photo 890 Photo Paper" (still with "No color management" and "Photo Paper" selected in printer driver) and printed the photo again. Now the photo looked as good as it did in PSE (!!!???).
    Now I have made a few printer preset in LR for various print sizes, and the prints look fantastic. Every time! Do I have to mention that I am a happy guy ? :-)
    BTW, remember that a printer preset also saves the printer driver settings. Forgetting this can easily cause some unexpected results.
    The only thing is that, I still do not know what fixed the problem, and I am a bit worried that the problem might come back again. Maybe the print related changes made in PSE and the following selection of the same settings in LR did - somehow - "synchronize" LR to a proper color management. Sounds weird, but if it works...
    I hope this long explanation was useful to - at least - some of you, who experience printer problems in LR. LR is a fantastic application, and I enjoy using it, but the printer problems has really been frustrating.
    Good luck!
    /Per

    Little unclear about the border thing- you say it prints with a too wide border, but also say:
    When I print the image with this set up, it still is printed without a border.
    It's a factor of your printer, though; some can never print without a margin around all sides; this can be a border, or cut off. Good news, though; you can have a 5 x 7 borderless, or with any size border you wish if you print on larger paper, and trim to taste.

  • Leopard printing problems on several printers (Am I the only one?)

    Since installing Leopard shortly after it was released, I've had flakiness with printing:
    - With Tiger, when I printed, I could open the printer's window, and see the print job queued. The job would finish, disappear from the window, and everything would be fine.
    - When the job was printing, the printer icon would appear in the Dock. When the job was done, the icon would disappear from the Dock. Simple.
    With Leopard, printing has worked, but I have never seen a print job appear in a PrinterProxy window. I print, the printer outputs the job, and PrinterProxy is always blank. The printer icon appears in the Dock, and stays there forever. I found that I could ctrl-click on the icon and select the Auto Quit option (Hooray!), but that only worked for a while. Then the icons started staying in the Dock again. When I click on the Dock, there is no more Auto Quit option... just the "Application Not Responding" message. I have to force quit Printer Proxy after every time I print.
    What's stranger is how long it takes for the PrinterProxy app to start up. The icon in the Dock bounces for well over a minute. Sometimes, the job finishes printing before the app is launched. If I switch between apps using Cmd-Tab, I can select the PrinterProxy app, but it never actually displays; instead, I just revert to the current window.
    This is true for every printer I use, and as a traveling consultant, I use several. It is true whether I am printing via Airport, or over a direct Internet or USB connection.
    The printers that are permanently in my Printer List are:
    Canon i9100
    Brother MFC-8840
    Epson Stylus Photo 220
    HP LaserJet 1320N
    HP LaserJet 8800
    HP LaserJet 6570
    HP Color LaserJet 5550
    Adobe PDF 8.0
    All of these have the same problems. What's worse is, when I have a printing problem, there is no way to diagnose it, since the print jobs never show up in the PrinterProxy.
    I have reset my printing system many times. I have deleted and re-added my printers many times. I have downloaded drivers from the manufacturer's sites, and reinstalled Leopard's default drivers. Nothing makes a difference. Strangely, after updating to 10.5.2, the Auto Quit problem went away for awhile, then returned spontaneously.
    At the thread below, I show some of my system and crash logs from a prior discussion. Someone was helping me with the problem, but after asking me to post my logs, he seems to have dropped off the thread.
    http://discussions.apple.com/message.jspa?messageID=7013209#7013209
    I can't believe this problem is endemic to Leopard. I know many people who seem to use Leopard without any problems at all. (They even print once in a while!) And yet, as a fairly advanced user, I can't believe I'm the only one having this problem! My system is pretty plain vanilla, with no weird mods, hacks or apps. Pretty much just straightforward creative and productivity apps. I use it daily for business, so I try to keep all wacky stuff off of it.
    There must be a solution, short of doing a clean install. Can anyone help? Are there PrinterProxy-related files I can delete when I reset the Printer System that might help resolve this? Prefs?
    Thanks,
    David

    I'm having exactly the same problem with a Lexmark C760.
    When I inspect the Activity Monitor while opening the Printer Icon from the Dock (or press the Button "Open Print Queue" in the "Print & Fax" System Preferences), I can see the Printer Icon as "Printer Proxy (Not Responding)" marked in red in the processes list. The Dock icon bounces for quite a while, and after about 2 minutes, a Printer List actually appears under the PrinterProxy application and the process in Activity Monitor changes its name to "(null)" and its color to black.
    Though there is no entry in the PrinterProxy list when I print something from another application while keeping the window open, I can select "Supply Levels" and the correct information appears, so it seems to be functional.
    It also seems that there are several copies of the drivers remaining, as the application in the Dock is named "Lexmark C760 (4)", probably from my attempts to remove and reinstall the driver. Is there some interference with old installations of the drivers that still lurk somewhere, hidden in the depth of the many libraries? How can I get rid of the previously installed drivers for good?

  • Printing problems with HP Laserjet P1005

    everything seems to be ok with my printer HP Lasejet P1005, but it just  doesn't print. The works are in the gueue and error messages continually is "set the new toner cartridge"  althrough I've changed the cartridge already.  Also there is a message "HP:s part number"
    What can or should I do??? Help!!!

    Hi @rlp48,
    I see by your post that you are getting the error message "set the new toner cartridge" and you have already changed it with a HP toner. I would like to help.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
    Open and close the lid 5 times quickly. It should print out a page with lines on it.
    Did it print the self test?
    If the self test page printed, clear the Spool folder and restart the Print Spooler and try printing again.
    How to Clear Current Print Queue In Windows Vista & Windows 7.
    Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    Are you using Genuine HP Toner?
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    Please provide in detail the results if you are still having issues.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Printing problems with hp laserjet 1018

    - printing problem with my hp laserjet 1018 (no *.pdf files!), all other documents were printed
    - hp photosmart premium c309 works with all file types
    Windows 7 64 bit
    Adobe Acrobat Pro 10.1.7
    Acrobat Reader 11.0.3

    Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

Maybe you are looking for

  • Upload data from legacy system to SAP through ALE IDOC

    Hello All, I have a requirement where i need to upload the data from legacy system to SAP. So i am using ALE IDOC. In my requirement i need to extend the Standard IDOC. I have extended the IDOC and even found the exit for the updation of the extended

  • Can't install APE8 in MAC OS

    Hello, I have downloaded the trial version of Photoshop Elements 8 for Mac OS. I have a Mac Book Pro with Leopard. I've tried to install it but at the end of the installation I always get an error saying installation found a problem. When I click mor

  • Halftones in Elements 12

    Hi at all, I want to create haltones and have seen a video of how to do this (but don't know the photoshop version which is beeing used – I use Elements 12). The guy in this video can create halftones by change the mode to bitmap. On the bottom of th

  • Adobe Reader V 9.3.3 Update Available Today

    Since the fix for Adobe Reader and Adobe Acrobat are now available, what version is required to be installed to use this update? It would be so helpful to have a fix that could be installed over 9.3.0. Recent updates and fixes have required multiple

  • Blue Screen of Death on install of j2re-1_4_2_04-windows-i586-p.exe

    Immediately upon installing j2re-1_4_2_04-windows-i586-p.exe, I get the "blue screen of death" on Windows 2000, indicating memory dump. Applications do not work subsequently that use j2re. Attempts to modify in reinstallation indicate errors in Windo