Printing problem on Deskjet F2280 connected to JetDirect en3700 (Scanning works)

Hi,
Recently acquired a JetDirect en3700 and after updating it to the latest firmware release (V.28.22.FF?) hooked up my trusty Deskjet F2280 to it. The printer is detected by the print server and I can scan pages using the Web UI but I can't print anything, even the test page button (the physical button on the en3700) doesn't produce any output.
I've installed the network printer on Windows 8.1 x64 and Debian Wheezy and while they can both see the printer, no output is produced when I send pages down to it.
When I connect the printer to both machines using USB I can print pages without an issue.
Here's the main page on the Web UI, stating that the printer is 'Online':
And the full configuration page:
Any thoughts/comments?
Thanks.

Hi,
Follow the HP Print and Scan doctor by selecting Fix Printing and check if that may make any difference.
The tool can be downloaded from the following link:
http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-92​6&h_lang=en&h_client=s-h-e016-1&h_keyword=dg-PDU
I would also suggest trying the following Fixit by Microsoft and check if that may help resolving the issue:
https://support.microsoft.com/en-us/mats/printing_​problems/en
If the issue persists follow these steps and check if that may help:
Unplug the USB cable.
Uninstall the printer by following Start > Programs > HP > HP Deskjet 2645 > Uninstall.
Click both the Windows Logo and the R keys of your keyboard. the Run dialog appears.
Type Spool and press OK.
Open the Drivers folder.
Open the x64 folder.
Open the 3 folder.
Rename the HPBXPSRENDER.DLL file into HPBXPSRENDER.OLD
Reinstall the HP software and try printing again
Hope that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Printing problems with HP 1012 connected via Airport Extreme - resolved?

    I originally posted on this issue in a long-running discussion on HP printer issues.
    http://discussions.apple.com/message.jspa?messageID=10109788#10109788
    Problem: Upgraded iMac 10.4.11 to 10.6 Following upgrade everything seemed fine except that the HP 1012 connected via Airport Extreme was not responsive. The system knew the printer was there, had installed the proper driver for it.
    Intermediate troubleshooting: I tried to use Airport Utility to check the AE. It timed-out when trying to retrieve the AE setup specifications. I tried to update the firmware (7.4.1 to 7.4.2); system timed-out after a very long several minute "search for new version of the firmware."
    Apparent solution: (any of the following may have made the difference - sorry not to have been more systematic)
    a. I turned off AP on the iMac.
    b. I unplugged the AE base station for one minute+, then re-powered it.
    c. I opened my MBP with 10.5.7. Started up Airport Utility.
    d. I renamed the base station. Left all other settings alone.
    e. I installed the 7.4.2 firmware upgrade.
    f. I ran Preference Repairs on the iMac (though I had done this right after installation of 10.6)
    g. I turned on AP on the iMac.
    Result: Almost immediate connection to AP, printer quickly began printing several of the test documents that must have been waiting in queue.
    Too early to tell if I will have any further problems if if it permanently fixed.
    Thanks to the several messages in both Printer and Network categories that suggested one or more of the above steps.
    Stan

    I hooked up my wife's Deskjet 5150 to my mac via USB. Since the 5150 does not have a driver from HP to work in SL. I decided to us the generic Gutenprint v5.2.3. For the heck-of-it, I picked, HP Deskjet 5550-Gutenprint v5.2.3. It prints. and the utility works, BTW, I am low on black ink.
    I also tried the other printer drivers labeled "any printer name"-Gutenprint v5.2.3. and they all worked with the 5150.
    So now that I know that the 5150's will work via USB with SL, I will now upgrade the other two laptops in my house to SL.
    How to:
    Turn printer on.
    open System pref/ printer-fax/ add printer
    Select hp desktop 5100
    (name: -- Change name if you want - I kept " hp deskjet 5100"
    Location: Your computer
    Print Using: open dropdown box, select printer software. Type in: " Gutenprint" or "deskjet". I picked the HP Deskjet 5550-gutenprint v5.2.3. but I do not think it matters as long as it is a -gutenprint v5.2.3 driver.
    Select OK

  • Problems with Deskjet 3050A connecting to the computer (Mac)

    Hi,
    I have recently moved to university and have bought my new printer with me (which I had set up at home). But I am having real problems connecting it to the computer. It doesn't accept the wireless connection because it is secure as it is from the university. The USB connection also doesn't seem to work as it always says that the printer is not connected. I have tried installing the software again and it recognises the printer from the USB, but there is no difference when I try to print something.
    Please help as it's essential for my studies!
    Thanks

    Welcome to the forums. You need to:
    1. Bind your desktop machines to your Open Directory master
    2. Create groups and user accounts in WorkGroup Manager which allow your users to log into those computers
    You will find the User Admin documents here useful:
    http://www.apple.com/server/documentation/
    hth,
    b.

  • I want to print from my deskjet 3050a connected to pavilion laptop by usb

    I didn't get my printer email when setting up. I need it to print from my laptop using the wire usb connection.  The wireless button is flashing on the printer, but i want the eprint button on instead. Nothing happens when I press it. Where do I go from here? I can't retrieve the printer email because I don't know how to reset up the printer to get it again (if it was there in the first place). I need the right printer email to register it first on the HP eprint site before I can continue. Is that right?

    HI,
    TO use eprint the printer needs to be connected to the network, it will no work via usb as far as i know.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • Printing problems with Deskjet 970 Cse

    Sometimes when I try to print a pdf file, the printer just prints a few lines of each page and skips the rest. I end up getting several pages output with only a few lines in each page. How can this be fixed? I am running Windows Vista.

    The troubleshooting steps in the document here may help.  I would also suggest you make sure you have the latest version of Adobe Reader.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Windows 8/8.1 Partial Print Problems with Networked Inkjet Printers (Envy, Officejet and Deskjet)

    There are a lot of threads being posted about this problems with printing on the following these devices when they are connected in a Network Environment (Wireless or Wired)
    HP Officejet Pro 6830
    HP Officejet 6800
    HP Officejet Pro 6230
    HP Officejet 6220
    HP Officejet Pro 8610 e-All-in-One Printer series
    HP Officejet Pro 8620 e-All-in-One Printer series
    HP Officejet Pro 8630 e-All-in-One Printer series
    HP Officejet Pro 8640 e-All-in-One
    HP Officejet Pro 8650 e-All-in-One
    HP Officejet Pro 8660 e-All-in-One
    HP Officejet 7610 Wide Format ePrinter
    HP Officejet Pro 3610 Black and White e-All-in-One
    HP Officejet Pro 3620 Black and White e-All-in-One
    HP Officejet Pro 251dw Printer series
    HP Officejet Pro 276dw MFP series
    HP Officejet 7110 Wide format ePrinter
    HP Officejet Pro 501dw Printer
    HP Officejet Pro 401dw Printer
    HP Officejet Pro X451dw Printer
    HP Officejet Pro X576dw MFP
    HP Officejet Pro X476dn MFP
    HP Officejet Pro 451dn/551dn MFP
    HP Officejet Pro 451dw/551dw MFP
    HP Officejet 4630 e-All-in-One
    HP Deskjet Ink Advantage 4640 e-All-in-One Printer series
    HP Deskjet 2540 All-in-One Printer
    HP Deskjet Ink Advantage 2540 All-in-One Printer
    HP ENVY 5530 e-All-in-One Printer
    HP Deskjet Ink Advantage 4510 e-All-in-One Printer
    HP ENVY 4500 e-All-in-One Printer
    HP Deskjet Ink Advantage 3540 e-All-in-One Printer
    HP posted a workaround for this problem while they were working with Microsoft to get the root cause of the problem, many customers commented that the workaround helped them out and they were able to print. This workaround was not easy to use as the customer needed to add another printer manually and changed drivers.
    We can now announce that the problem has been fixed, the problem involved a Microsoft Network component that HP was using to talk to and track the printers on the network. This fix is being rolled out by Microsoft via Windows Update and anyone who has Windows Update enabled and set to automatically install updates should have already received this update. For those that do not have Windows Update setup to automatically install fixes the fix is available now and should be installed.
    The details of this fix and a manual method of installing it can be found here.
    http://support.microsoft.com/kb/3000461
    This fix is only designed for users that are using there printer on a Network (Wireless or Wired) and will not fix partial printing problems encountered with USB connections.
    There are many threads in HPs forums about this issue (below are links to a few of them)
    http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/Missing-partial-prints-amp-Printer-Offl...
    http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-Envy-4500-cancels-job-in-the-middle-...
    http://h30434.www3.hp.com/t5/Other-Printing-Questions/Only-prints-half-a-page/m-p/4054888
    JonW
    I work for HP

    @tenkeypro 
    First, I would suggest you uninstall the exsisting driver and reinstall following one of these documents to see if it will clear this error message:
    Install HP print and scan software on a Windows 8 computer (32-bit and 64-bit)
    Universal Print Driver (no scan)
    Driver support included in Windows 8 / Windows 8.1 or in Windows Update
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • OSX 10.5.4 printing to HP Deskjet via USB on Time Capsule

    Mac has a problem printing to a Deskjet 6122 connected USB to a Time Capsule. The Time Capsule is set up as a LAN wireless access point to the ISP.
    Wireless clients are:
    1. Macbook with Leopard OSX V10.5.4. All OSX updates were applied Dec 5, 2008 in the shop when the Mac got a new HDD and the Leopard upgrade.
    2. A Windows Vista box (Time Capsule runs 802.11g because of the wireless adapter in this box).
    Printers on the LAN are:
    1. HP Deskjet 6122 connected to the USB port on the Time Capsule, and
    2. HP Laserjet 1022NW connected Ethernet to the Time Capsule.
    Printer sharing is OFF for both printers/clients
    Addition of both printers to the Mac was normal. +*But when printing multiple page documents to the Deskjet 6122, the Mac only prints one page*+ (the last one) without error message of any kind. The Mac’s driver version for this printer is 3.3.3. I deleted the printer from the Mac and re-added it – same problem. I followed the procedure in “Printer Troubleshooting for Airport Base Stations and Time Capsule” – same problem.
    The Mac prints all pages of multiple page documents to the Laserjet 1022. The Windows box prints all pages of multiple page documents to both printers.
    Any ideas?

    Thanks Greg.
    I don't want to hijack RetP3Pilot's thread, but I may be having a similar issue.
    I've recently been experiencing a "connection failure" error when trying to print to my HP Deskjet 950 connected to a Time Capsule via Bonjour. I tried your suggestion of using the latest Gutenprint driver and adding the printer via IP Address. It appears to connect but anything I send to it stalls at 24% and there is no visible activity going on with the printer. ANy suggestions are welcome.
    Again, sorry to hijack the thread. Let me know if you'd rather I start a new one.

  • Airport Extreme Printing Problem with HP Deskjet.

    Hello ... I wonder if any helpful folks can assist me with my printing problem? I am using Tiger on a new Intel imac with a HP Deskjet 960C. This printer is listed as having the latest drivers included within Tiger and works perfectly when connected via USB so my problem I guess is not with the software....I have disconnected everything and plugged everything back together again. I also deleted the printer from the printer list within the Printer Setup Utility application.... The imac recognisies the printer and upon pressing the print button everything feels as though its just going to work. The blue barber shop scroll appears but the printer fails to kick into gear and I get the big red exclamation mark appearing in the status box .... I would really love to try and sort this annoying error ... Any ideas? Thanks. Book G4   Mac OS X (10.4.4)  

    Hello jds17. Welcome to the Apple Discussions!
    Unfortunately, not all USB printers are compatible with AirPort base stations.
    Take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
    o 802.11g AirPort Extreme Base Station (AEBS) or AirPort Express Base Station (AX)
    o 802.11n AirPort Extreme Base Station (AEBSn)
    If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also, you may find the following Apple article helpful.

  • HP Color Laserjet 3600 Printing Problems with Airport Extreme & JetDirect

    I have a HP Laserjet 3600n connected via ethernet cable to our Airport Extreme base station using the built-in JetDirect functionality of the printer. Prior to installing Snow Leopard we had no problems and every computer on the home network could see and print with full functionality on the printer.
    After installing Snow Leopard, it took a while but I got the printer working again with the same setup. Then we had a power outage and the printer was no longer visible on the network or in the airport settings. Again it took a while but I once again got it to work. But now it seems like it keeps falling off the network and the printer itself either shows an IP address of 0.0.0.0 or another random one. The IP address should be generated by DHCP by the airport.
    I don't know if this is a problem with Snow Leopard, the airport extreme, or the printer. The way I got it to work the last couple times no longer fixes the problem. Someone please help.
    Message was edited by: balistikboy

    I don't know if this is related, but...
    My MacBook Pro (Airport) has always been dicey connecting to an HP LaserJet 4000 on my wired LAN. Before Snow Leopard, I used AppleTalk rather than IP printing because it just worked.
    But Snow Leopard doesn't support AppleTalk any more, so I reinstalled the printer to connect via JetDirect (which supposedly provides more features). When it works, it works fine. But very often I get a message that it can't connect to the printer. The only thing I've found that fixes the problem is power-cycling the printer, which somehow enables queued jobs to print. Needless to say, this gets old.
    Is there some trick I'm missing?

  • Deskjet 5552 USB - no print problem.

    Printer:      Hewlett Packard deskjet 5552 USB connection.
    System:    Microsoft Windows XP
                    Home Edition
                    Version 2002
                    Service Pack 3
    Computer: AMD Athlon(tm) 64x2 Dual Core 3800+
                    2 GHz 2.00 GB of Ram
                    Physical Address System.
    I haven't used my printer for some months now but this last weekend I needed to. Even after careful preparation it failed to print. I know there have been a number of updates from MS but I would not have thought that would be the problem. However thats why I'm here.
    Upon installing '5550-enu-win2k_xp.exe' a sample print is obtainable from the printer ( the picture of the leaves and HP invent logo). However this is the only print available. It will not print from Notebook, Wordpad or the cursor in the command window. I installed the Diagnostic Tool HPPDU.exe but the report was that everything was set up correctly. The only thing that didn't happen was the printing of a sample page.
    Since I found the problem I have removed Microsoft Office, 2010, just in case this may have been a problem. I have also removed the HP printer program, twice, and reloaded it. A point of interest the HP program wasn't uninstalled in total. I had to remove what remained by deletion and then ran RegMechanic to remove any loose ends.
    The printer works fine the software is as uptodate as the HP site can supply. I'm stuck. Never experienced anything like this.
    What else should I look for to correct this situation?
    TIA David.

    I have had the same problem. I found the printer cartridges were old but still had ink. I have replaced them but still have the problem. Did you have any luck?

  • Printing with HP Deskjet 1510 from wireless connected ipad using computer connected to broadband

    Hi,
    I am trying to figure out easy way to print any content from my ipad connected with wifi through xp computer to HP Desjket 1510,

    Hi Ieb_Fabulous,
    Welcome to the HP Support Forums. I gather you are trying to hook your Deskjet 1510 printer to your laptop with a wireless connection.
    This printer does not support wireless connectivity. I have included the Deskjet 1510 Printer Specifications for your reference.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • I have HP LaserJet Pro M1536dnf Multifunction Printer and my problem with eprint "Not Connected"

    i use eprint but after day show in site massage state Not Connected
    to solve this problem turn off printer or hp web services and tern on and it work 
    but same problem after some hour  show not connected
    how can printer connected all time ?

    Hey sfareg,
    One thing you need to check is if your internet connection is intermittent. If it is not, you can follow these steps to give the printer a better connection.
    1. Find your printer's IP address by printing a network configuration page.
    2. Type you IP address into the address bar of your web browser.
    3. Click on the network tab at the top of the page.
    4. Look at the left hand side and click IPv4 under wireless.
    5. Change the IP settings to Manual.
    6. Enter the printer's IP address, your subnet mask, and your routers IP address or default gateway in the spaces.
    7. Set the Preferred DNS to 8.8.8.8.
    8. Set the Alternate DNS to 8.8.4.4.
    9. Click apply.(You may need to refresh the page if it says processing for longer than a min and click apply again.)
    The printer should have a better connection now.
    Although I am an HP employee, I am speaking for myself and not for HP.
    If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

  • How do I connect my HP Deskjet 1050 All-in-One Printer - J410a to a wireless connection

    I have a 
    HP Deskjet 1050 All-in-One Printer - J410a
    I am connected to a computer but would also like to connect it to my laptop wirelessly.
    Can't do it.  Must be doing something wrong.  Need help thanks.

    Hi @5468,
    Welcome to the HP Forums!
    I noticed that you are wondering how to connect your HP Deskjet 1050 All-in-One Printer - J410a to a wireless connection. I am happy to look into this for you!  
    According to your printer's specifications and the Setup Poster, this printer can only be connected to a computer via a USB 2.0 printer cable connection. This printer does not have wireless capabilities.
    Hope this answers your question, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • G3 Pismo Powerbook and HP Deskjet 3325 Printing Problems

    The problem is that the Deskjet fails altogether to print sometimes. The error message tells me to allocate more memory to the printer. I do so but this does not help at all. I have 128Mb virtual memory turned on in addition to the built-in RAM of 128Mb.
    Might the problem simply be lack of RAM? There does seem to be plenty of memory available if I look at ‘About this Computer’
    In order to try and solve this problem, I have updated
    OS 9.1 to 9.2.1 to 9.2.2 successfully
    downloaded and installed the latest printer driver v.6.4 from the HP download site
    I now have two options, among others, in the left-hand window of the Chooser:
    The old printer driver called something like Deskjet 5.3 and the new printer driver called Inkjet 6.4
    If I select the former, which is what I always did in the past, the Deskjet 3325 printer appears in the right-hand window of Chooser, I select it (with AppleTalk inactive) and then the document sometimes, but sometimes not, prints OK.
    If on the other hand, I select the Inkjet 6.4 driver in the left-hand window, no printer at all appears in the right-hand window. If I just continue from here and give the print command inside, for example a Word document, the print dialogue appears, I click on print, but am then told that I have selected a model called HP 6670, which is the wrong model of printer, and must therefore select the right model. The Inkjet Printer Utility does not offer me the option of selecting the right model viz the 3325, or indeed any model.
    It may or may not be relevant, but I have Word 5.1 and Word 98 on the G3. Printing problems seem to occur far more with Word 98 than Word 5.1.
    I would be most grateful for any help. Thanks.
    Nick
    G5 iMac   Mac OS X (10.4.6)  

    Well. I'll answer my own question in case anyone is interested.
    Uninstall the HP printer drivers.
    To do this, delete all references to HP in the Extensions, Disabled Extensions, Preferences and Startup folders, all of them in the System folder, by selecting them, dragging them to the Trash and emptying the Trash.
    Then do the same with all references to HP items in the Applications folder.
    Download and reinstall the most-up-to-date printer driver avaialble for your printer from the HP website.

  • Printer connectivity failed; reconnected HP C4600, but computer commands to printer (for both print and scan) don't work.  Any ideas other than "it's a printer problem"?

    HP C4600 printer connectivity suddenly failed; attempted re-connect, message tells me reconnection succeeded, but computer commands to printer - both scan and print - do not function.  Any ideas, other than "It's a printer problem"?

    Have you the latest drivers?

Maybe you are looking for