Printing problem on HP Photosmart Premium C309g-m

Hi all,
I am currently using HP Photosmart Premium C309g-m to print my documents and it runs on five different ink catridges. I usually print text documents using the black ink catridge. I realised that the moment the ink runs low(when they display the ! sign in the yellow triangle), the print out quality is significantly reduced in the sense that my text documents are printed with certain areas being missed out such as having half a line of text not being printed etc when my ink isn't even out or nearing to being completely out.
Does anybody else experience this problem? Is this problem exclusive to this model or just this particular printer I am using? Is there any way I can go about solving this problem because essentially this means that I have to replace the ink catridges once they go low because I can't print a complete document at all! Thanks!

Print a Wireless Network Test.
I hope you are not using this for MAC filtering on your router. It is pretty much a useless security method.
Read more here.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Printing problem with HP Photosmart Premium C309g-m

I'm running windows XP sp3 on all of my machines with this printer{HP Photosmart Premium C309g-m} wireless network.Recently everything starts to print one inch lower on the paper and cuts off the bottom of each document I try to print.I print mostly from microsoft word 2007,and I have checked all the settings in word.It is almost like the printer skips an invisible header then starts to print the document.Any ideas would be appreciated.

I don't think there is anything wrong with the DSL modem HW. There might be an issue with how print data is being routed though.
Please try the second experiment where you blank-out the default gateway and DNS entries from the printer's internal web configuration page. Open the printer's internal web page by browsing to its IP address. Select Networking and then Wireless (802.11). Under the IPv4 Configuration tab, select Manual IP:
For Manual IP Address, use the existing printer IP address.
For Manual Subnet Mask, use 255.255.255.0
For Manual Default Gateway, leave blank. This is important.
Select Manual DNS Server:
Leave both the Manual Preferred DNS Server and Manual Alternate DNS Server fields empty. This is important.
Press Apply.
Turn off the DSL modem, the printer and all computers connected to your network. Wait 60 seconds then turn on the DSL modem and then turn on the printer. Then turn on the computers. See if this corrects the printing speed.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

10.6.8 Printing problem with HP Photosmart premium C310 printer

I hvae a Photosmart Premium C310 printer which is connected wirelessly to my network. I also have a Mac Pro which is connected to the same network by ethernet cable. Up until I updated to OS10.6.8 everything worked fine. After that I found that when I restated the printer I could see it for a short time under the printer list but then it seems to "time out" and I can no longer print to it within a couple of minutes from my Mac Pro. When I restart the printer I can also see its embedded web page again for a few minutes but then it becomes not visble.
I also own a Macbook pro and two iphones and an ipod touch and all these wireless devices have no problem with seeing the printer and printing to it at any time. The Macbook Pro is also updated to 10.6.8 and works fine with this printer.
It would seem that the issue is not with wireless devices but with a wired device printing to this wireless printer even though it is on the same network and on the same subnet mask. All that has changed between working fine last week and not being recognised this week is an update to OS10.6.8
I have restarted the Mac Pro, reinstalled the latest HP software and reset the printers wireless setup but this makes no difference.
Is this a similar issue to what others have been reporting about a bug with printing under 10.6.8 or possibly something else. Any help here would be appreciated as I have no way of printing from my Mac Pro right now.

Pengtao, I have plugged my Macbook Pro into the network (with Airport off) and I can no longer reach the Photosmart printer. Remove the cable and go wireless and the Macbook Pro can reach the printer again. I have installed the photosmart printer software under Windows 7 using Parallels on my Mac Pro and have no problems finding the Photosmart printer from it.
To make matters worse I have bought a new Laserjet M1536 today and install it on my network. Again I get the same issues. I can print to it from any wireless device on the network but cannot reach it on any wired device on the network.Switch the printer off and on and I can see it and print to it for about a minute then it becomes "offline" to my Mac Pro
Given that it works fine under Windows 7 from a Mac Pro I have to conclude that the issue must be OSX 10.6.8 and nothing else as everything worked fine before the upgrade. I have turned all device off and on , checked all cable connections and also uninstalled and reinstalled all printer drivers on the Mac Pro and cannot get it working. Any advice you may have that may solve the problem beyond it being an OSX issue will be greatly welcomed.

Printing problems with HP Photosmart Premium C310a series

I recently installed an HP Photosmart Premium C310a series printer. Now the printer takes about 45 minutes to print a document. HP support says this is an Apple problem.
Can anyone help?

What file was the problem?
It seems that in the Windows/System32/Spool/Drivers/x64/3, the newly re-installed updated HP drivers (with the 2011-2012 dates) are the only ones with a .BUD extension. Maybe my Win7 computer doesn't recognize them as drivers? The other driver files in the '3' Folder have .dll, .gpd, and .vdf extensions. Is there another spot they should be copied so the computer can find the drivers? I see that up the chain in the Spool Folder, next to Drivers there is an empty folder named Printers.
And what files (Filenames) are needed to run the 309g-m? I assume some older drivers were kept on file when I ran the updated driver Install program. The newer HP 2011-2012 files in the '3' Folder are hpoc30j3.BUD, mxdwdui.BUD, hpc309at.BUD, and everything else is older. I need to know what to copy-paste to a better folder location.
Whatever and wherever the Drivers are, my computer can not find them!

Unable to Print (wireless) to HP Photosmart Premium C309g-m - because og accespoint

Hey
I have just istalled an accespoint in out house. The second floor of our house now have good wifi - but my photosmart c309g-m wont connect to the wifi it can find more than one accespoint = out wifirouter and our accespoint.
How can i solve this puzzle ??

Well you can try deleting all the print jobs, then uninstalling the printer from the MBA, restarting the MBA using a SMC reset and then reinstalling the printer in the Print & Fax utility. If that doesn't work you have 3 months of AppleCare, I'd recommend calling them for some help. If you need help on doing a SMC reset the instructions are:
*SMC RESET*
• Shut down the computer.
• Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
• On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
• Release all the keys and the power button at the same time.
• Press the power button to turn on the computer.

HP Photosmart Premium c309g wireless network printing problem with 64bit Windows 7

A problem exists where the c309g is installed on a wireless network where one of the PCs on the network is running 64bit Windows 7. Amongst other things, the printer may print very slowly, appear disconnected or unavailable through the HP Solutions Centre and may not be pingable from any of the PCs on the network. The problem will affect ALL the PCs on the network !
Network monitoring software will also show an enormous level of network traffic between the printer and the Windows 7 PC. As soon as the Windows 7 PC is switched off, everything returns to normal.
The problem is solved by disabling the HP Network Devices Support Service on the Windows 7 PC as follows;
Run services.msc from the Run command on the Windows 7 PC. This will display the list of all the local services running on the PC together with Description, Status and Startup Type information for each.
Scroll down the list until you see the HP Network Devices Support Service.
Right click on it and select Properties to bring up the Properties window.
Use the dropdown list to Change the Startup Type to Disabled.
Once disabled, the printer will start to work normally. HP are aware of this problem which may be unique to the 64bit version of Windows 7.

Thanks but no luck... I tried it..... Got back from son's baseball game.. checked on printer - as in tried to have printer print something... nothing... prior to going out I went ahead and deleted the 6 c309 print devices and reinstalled a new one and got the printer to work... after the game it was back to ignoring print commands... When I go to printers there again are 6 print devices for this printer - one titled HP Photsmart Premium C309 g-m... then 4 copies of that and then one version titled HP0AC58C (HP Photosmart Premium C309g-m).
As I just finished writting that... the printer came alive and started printing some previous jobs... so maybe it helped - not sure but what about the 6 versions of print devices? I just checked the statuses of all the versions and the default is offline... the various copies have different amounts in que but have a pending status of pending deletion... When I tried to make one of the other copies the default printer - it errors out with 0x00000709

HP Photosmart Premium C309g-m unable to print ("check printer documentation")

My printer is: HP Photosmart Premium C309g-m
My computer is: Mac (Mac OS X system)
After removing a jammed paper (probably the incorrect way), I now receive a message to check "printer documentation" and then press "okay". Tried everything I could find, including uninstalling and reinstalling. Still receive same message, and still unable to print.
Can anyone tell me in very simple terms how to fix this?

Hi there chnich,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Scan problems with my HP Photosmart Premium C309g-m

Hello
I have been experiencing a problem when I attempt to scan a Document or Photo on my HP Photosmart Premium C309g-m printer. Specifically when I scan it now takes longer to do so and when finished I save it to my deskstop but the result after saving consists or either a totally black background with horizontal white lines or a greenish background. I have tried resetting back to ‘default’ properties but nothing changes and the result is the same. I have shut down the printer, and unplugged it for several minutes and restarted it..but still no luck
Anyone out there with an answer on how I can fix this?
Thanks

Hello JWB46,
Welcome to the HP Forums!
I understand when you scan a document, it takes longer and the background is black with horizontal white lines or a greenish background. I will do my best to assist you! First, I need to find out your operating system on your computer? Windows or Mac?
How is this printer connected? Wireless or USB?
Please make sure you have followed this entire HP document on Color or Brightness Level of Scanned Image is Not Correct. I would like to test out the hardware within your printer. Try copying a blank document on the scanner glass. Let me know if you have the same results. I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

HP Photosmart Premium C309g-m Printer

I have an HP-Photosmart Premium C309g-m printer . I put in new ink will it not print correctly. The color is so light it is impossible to read. Also when I trouble shoot I am told the cartridges ware not aligned.Have tried to align and it wont.
My computer is an HP 64bit,8GB

The steps here should help resolve your issue. If not I would suggest soaking the printhead as described in this post.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Photosmart Premium C309g-m prints wirelessly from Mac & Vaio, but not Dell...

We bought an HP Photosmart Premium C309g-m about a month ago. It will print from my (old) Mac Book Pro and from hubby's new Sony Vaio, via cable, via bluetooth, and via wireless. We want to add a Dell laptop, and have installed the latest printer software from the HP website.
When we go to "add a device" on the Dell, the process goes through "Checking network configuration" and FINDS the printer (we have it set to automatic IP). We select the printer and click Next, the software says installing device and runs netowrk diagnostics without a problem.... and then we get an error at the installing device screen that says "Printer Setup has failed to complete, click Retry to Try again or Next to continue without connecting the printer."
Very frustrated! Any thoughts? Thanks in advance for any help. I thought maybe it was a port issue, but we turned the firewall OFF, and no dice.

You could download and run this very handy utility.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Photosmart Premium C309g-m (Fails or SLOW to Print Wirelessly)

My printer has usually worked until recently (past couple months). I have re-installed the driver several times, uninstalled the HP software, re-installed the driver only... and still the same symptoms occur.
OS: Windows 7
WiFi Router: Linksys E4200
Printer: HP Photosmart Premium C309g-m
STEPS TAKEN:
I begin a continuous "ping" of the printer from my PC and my ipad, to ensure I'm not losing network connectivity.
Pings are received on both pc and ipad without issue..
I print a "test page" from the printer properties screen.
Pings are dropped continuously...on both PC and ipad with one or two sporatic ones received with extremely high latency (29165 ms).
Printer sometimes fails to print the document or the document takes 3 or more minutes to print.
I believe it is an issue with the wireless network device on the printer. I was hoping a firmware would fix it. Can you advise me as to what the problem may be, where should I focus my troubleshooting?
I did run a HP Print/Scan Doctor tool, and it did say I had a "port mismatch" and that I needed to reboot my PC. I rebooted my PC, re=ran, and still the same "Port Mismatch" error comes up. So.. that leads me to believe it is an issue w/ my PC...but I can't find any thing that seems to be wrong w/ the port settings. Currently it is set on my printers hostname address, RAW, Port 9100.

Are you installing and reinstalling the printer from the CD? Just to establish a clean baseline lets try a full uninstallation/ reinstallation from the drivers available from the HP website.
First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer (make sure to match your correct OS):
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3793676&
Install that and let me know the result!
Have a great day!

HP Photosmart Premium C309g-m connection decay problem

Hello,
I bought a HP Photosmart Premium C309g-m today and have it succesfuly connected to my wireless N network. My problem is that everytime I reboot the printer it's connect lasts for about 30 seconds and then gets intermitent and then stops responding all together. This is repeatable and happens every single time I reboot the printer. All other nodes on my network continue to work just fine so I do not think it is my router that is at fault or any of my computers that I can reproduce this problem from.
As you can guess this is really frustrating to have a printer that works wirelessly for 30 seconds and then just stops. The printer itself shows a very good wireless signal the whole time so I can't understand what the problem is. Any help would be appreciated as I rather like this printer and would rather not have to shop for something else.
Brian
This question was solved.
View Solution.

The Linksys WRT600N is a simultaneous dual-band 802.11n wireless-router. There are a couple of things to try:
Please check that the channel width setting and for 2.4 GHz band is set for 20 MHz only (you can always use the 5 GHz band for 40 MHz clients).
Make sure that you're not running in 802.11n only mode (it's not well defined by the IEEE 802.11n standard).
If you still have trouble, open the printer's internal web page by browsing to its IP address. Select Networking, then Wireless (802.11), then Advanced. Scroll to the bottom of the page and check the setting for In an infrastructure network use 802.11b/g behavior. Press Apply.
If the printer doesn't stay connected long enough to make this change, you may have to use a LAN cable to temporarily connect the C309g to the WRT600N.
BTW -- how is DD-WRT working for you? We have a WRT600N in our test lab that I just decommissioned and I was considering reflashing it with one of the Open-WRT FW images.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

HP Photosmart Premium C309g-m wireless problem?

HP Photosmart Premium C309g-m works great beside the problem wireless network keeps disconnecting.... It disconnects from my wireless network often, and to get it work i have to turn off my router and priter and then turn them back on... It's kinda frustrating doing that every single day, and the one of the main reason i bought this printer is wireless netwrking... I have THOMSON TG782 router and i'm on Windows7 system... Thanks in advance for any help...

Sometimes DSL providers have more control over the router than the printer likes.
- Unplug the telephone line from the router
- Turn the power off on the router, wait 30 seconds, then turn the power back on.
- Go through the normal process of connecting the printer to the router.
- Now find the IP address of the printer (it should be on the self-test printout), type it into a browser.
- On that screen you will find a Networking Tab, then on the left Wireless, then the IPv4 Tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address). If you do not know, use the current IP address.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Leave the gateway and DNS blank
- Finally, plug in the phone line, reboot the router and test.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Photosmart premium C309g-m not printing AGAIN

HP Photosmart premium C309g-m printer is not printing. I use Vista. This product will print when it wants to. But every time I need to print from Quickbooks for a deadline, it refuses to print anything at all. But if I have no deadlines, no problem! I can print anything from anywhere anytime I want. But the minute I need to send out an invoice from Quickbooks, like today, I'm screwed.
I have:
tried to print. message is Error Printing. No reference number, nada, zippo!
restart printer. reprint document. same as above.
reboot laptop & printer. reprint document. (This usually fixes the problem) but sorry, same as above this time.
tried to refresh printer from control panel. Nada.
tried to restart printer from printer list. Screw you it yells back at me.
I try to use the Tech Help line for HP and they tell me. "We can get it working. But we charge $99." And I say "Screw you, I don't have any money left."
My deadline is in two minutes, and the invoices are not done. I have to go into a 2 hour appointment. But I'll be back. So maybe some kind hearted soul will send a message back on how I can fix this problem. It is frequent and irritating as hell.

is anyone able to help with this WON'T PRINT problem???????

Extremely slow wireless printing with HP Photosmart Premium C309g-m

I'm seeing extremely slow print speeds when printing wirelessly from a Mac or a Windows XP system to a new HP Photosmart Premium C309g-m printer. The printer begins printing immediately when I request a print, but it only prints one line. It will then take about 15 minutes to print the rest of the page, printing each line after a very long pause. Demo page printing doesn't exhibit this problem, only documents from programs like Word 2008, Safari and Firefox (tried firefox on PC and Mac) are affected.
If I connect to the printer through a USB connection it prints fine, so this problem appears to be with wireless printing only.
Printer: HP Photosmart Premium C309g-m
Computer: Mac mini (Late 2009 model) (also tried a Windows XP laptop as a comparison, using latest drivers from HP's website)
OS: Mac OS X 10.6.2 with all available updates installed
Computer connection method: Wired Ethernet connection to wireless router
Printer drivers: version 2.2.1 (Apple supplied, HP drivers never installed as system shipped with 10.6)
Wireless router: Apple TimeCapsule (Early 2009) 1TB, running in a/n and b/g modes on 2.4 and 5GHz. TimeCapsule is in bridging mode as the DSL modem handles DHCP service
Encryption: WPA2 Personal, no MAC filtering or hiding of the SSID.
IP addressing scheme: All addresses are handed out by DHCP server with no reservations of any kind
The TimeCapsule is sitting three inches from the printer and the printer indicates full signal. Connection of the printer to the wireless network and setup of the printer on the Mac went without a hitch. Only when printing a test document did we discover the problem. The wireless network is behaving as expected when accessing the Internet from both Mac and Windows devices (tested with a Dell laptop running XP and a MacBook running OS X 10.6.2), so I don't see any overall problems with the wireless network.
Attempted remedies:
1. Rebooting and powering off, waiting, powering on computer
2. Resetting the print subsystem, turning the printer off and on again and reinstalling the printer
3. Unplugging power from the printer and letting it sit for several minutes before trying to print wirelessly.
None of these worked.
This question was solved.
View Solution.

I don't think there is anything wrong with the DSL modem HW. There might be an issue with how print data is being routed though.
Please try the second experiment where you blank-out the default gateway and DNS entries from the printer's internal web configuration page. Open the printer's internal web page by browsing to its IP address. Select Networking and then Wireless (802.11). Under the IPv4 Configuration tab, select Manual IP:
For Manual IP Address, use the existing printer IP address.
For Manual Subnet Mask, use 255.255.255.0
For Manual Default Gateway, leave blank. This is important.
Select Manual DNS Server:
Leave both the Manual Preferred DNS Server and Manual Alternate DNS Server fields empty. This is important.
Press Apply.
Turn off the DSL modem, the printer and all computers connected to your network. Wait 60 seconds then turn on the DSL modem and then turn on the printer. Then turn on the computers. See if this corrects the printing speed.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Printing problem on HP Photosmart Premium C309g-m

Similar Messages

Maybe you are looking for