Printing problem with 5610v all-in-one.

After replaceing a print cartridge the printer started printing with a shadow. That is, the print has a second light image before the main character is printed. I do not know why this is happening and I need to change the charicteristics of the printing back to normal. I have cleaned the new cartridge and I have replaced the cartridge. I have also aligned the cartridge but nothing helps. Suggestions will be greatly appreciated. My all-in-one is a little over two years old and I use Windows Vista Home Premium 64 bits. 

Try doing this:
1. Unplug the power cord from the back of the printer and from the wall outlet.
2. Wait for a minute or two.
3. Reconnect power cord directly to the wall outlet.
4. While the printer is still unplug from the back, press and hold the pound (#) and six (6) buttons at the same time.
5. While holding the pound (#) and three (6) buttons, reconnect the power cord to the back of the printer and then release the buttons.
6. Turn on the printer if it won't turn on after some time.
7. Follow the instructions on the LCD.
8. Try doing a copy in black after the reset is successful.
Please keep me posted if it works.
Message Edited by smartfriend on 11-25-2008 06:28 PM
Please click on KUDOS if you find my solution helpful.

Similar Messages

  • Mac OS 10.7 printer problem with 6500 all-in-one wireless

    HP 6500 all-in-one wirelss: After configuring (and reconfiguring) the printer and exhausting all the troubleshooting steps suggested by HP, I still have the problem of prints stalling in the queue or, alternately, printing very very slowly. Wireless connectivity is "excellent" according to the Wireless Network Test Report. When printing, printer is found, display says "Connected to Printer" then the barber-pole spins and spins and eventually the word "Idle" appears. Any suggestions on how to get printer to work?

    This article should help to maintain wireless connection:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en#N101
    Give the steps outlined a try and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Printing/Scanning Problem with HP All-In-One

    As you will see, I am a bit confused as to how my Mac is talking to my HP all in one. I am having printing and scanning problems. When I try to print, nothing happens. I go to print status and the print job is there but the printer is not printing. I try pausing, deleting and trying to print again, hold to no avail. It recognizes the job, it just won't print.
    Scanning is similar. Most of the time I end up with an error message "The scan cannot be performed because another program has control of the HP imaging device". It directs me to restart the program, close all programs, re-boot the computer. I have done all of these and no go. In addition, no other programs are running at the time.
    As far as my computer recognizing the HP, it does in both wifi and bluetooth. I have made it my default printer.
    I have a time capsule as a router and everything is set up properly for it. Four bars are shown indicating it is acting properly. Both it and bluetooth are turned on. The HP status lights are on for both wifi and bluetooth.
    I have checked with HP and Apple Support and could not find anything that addresses my issue. Please help!!
    Thanks

    I had a similar problem awhile back with my HP F2210 all-in-one. I basically re-downloaded all of the software for the printer from HPs site. Before re-installing, I did a safe boot. Then, I reinstalled and restarted and all was well. When software update told me there was a new driver available, I installed it and things still worked. I'm able to print, scan, and all the printer is supposed to do without a hitch.

  • Problems with hp1317 all-in-one printer

    I have a Mac OS X snow leopard and an HP 1317 all-in-one printer.  Although it says that the printer is ready it still remains idle and won't print. I've checked everything I can think of: unplugged the printer for a while and made sure I have clicked on Resume  etc.  Please could someone help? Thanks.  I did have suggestions from someone and this helped for a while but now having problems again.

    Thanks for your suggestions.  I've now uninstalled and reinstalled the HP software but am still having the message that there are components missing from the software so I still cannot print my documents.  I'm totally baffled and feel like slinging the computer through the window!!! If you havae any more ideas please feel free to pass them on to me.

  • Problem with Microsoft All-in-One Media Keyboard

    Hello,
    I found a problem with this keyboard when I was playing game. If I'm holding Shift + W and then i'm pressing D too (to turn right or rather to walk straight and to the right) it doesn't work. This same is happening if I'm holding Shift + D +
    W. But other combinations are working, like pressing Shift + W + A or Shift + S + D, etc. First I thougt that it is some game issue or program had keyboard shortcut and it's interfering
    with game. But I tried in notepad and it wasn't working too. After all it is not Windows 8.1 issue, because I launched ubuntu live cd and this problem still exist even there.
    Now what can I do with it? Go to warranty shop?

    Hi,
    Did this keyboard hotkeys work previously? Maybe this function only works in specific program or game.
    Keep latest driver and software for the keyboard.
    According to your description, best choice I think is sending the keyboard to the warranty shop.
    Regards
    Yolanda Zhu
    TechNet Community Support

  • 7410 All in one printer problems with working all of a sudden.

    My printer seems to have disappeared from my printer list. I have removed the software and re-installed, it sees the printer but nothing shows up in the printer list like it used to. I have set it on a static IP on a wired network. I started running the HP tech assistant and it failed on the Windows item 3rd in the list. The first 2 items passed. It said to power cycle both printer and computer. Did that and same error again. I can't re-run that thing right now but it starts doing things with the scanner when I try to run its fix part of the program and that is where the error comes in. I can't scan, print or fax from the computer any more. I have other computers here and the software works on them so it is something within this machine. Only software added was PC Speedup from the web. Seems to match that time frame when it was put in. It resolved other problems I was having but seems to have screwed up the HP software.
    When I try to re-install the software file (latest from the web site) it sees the printer IP, asks if it is the one I want to install which I answer yes to and it goes on its marry way finishing the installation but nothing shows in the printer list after it is done or after it is rebooted.
    Any ideas on what to do next?
    Don.

    Hello dh-agi,
    It sounds like that PC Speedup certainly messed something up (probably in the registry). You may have to do a system restore to a point in time before you did so.
    However, before you do that, I recommend 'scrubbing' the existing printer installation(s) and starting 'fresh'. To do this, follow the instructions below:
    If you are installing from Original installation CD:
    1. Insert CD into drive, and then cancel the installer
    2. Open My Computer, and then right click on the CD drive and chose open
    3. Open folder Util
    4. Open folder CCC
    5. Run the L4uninstall (unless you have an HP PC, then run L3uninstall)
    6. When the uninstall has completed restart the computer
    7. Run Disk cleanup from Accessories\ System Tools
    8. Download and install the latest version of Adobe flash player using the link below
    Adobe Flash Player
    9. Download the latest full feature software and drivers using the link below
    http://goo.gl/q2hE0
    10. Run the download to reinstall the printer
    If software was downloaded and extracted to your system:
    1. Hold the Windows key + r key, type %temp% in the run field, then hit Enter
    2. Look for, and open a folder starting with 7z (Example: 7zS2356)
    3. Open folder Util
    4. Open folder CCC
    5. Run the L4uninstall (unless you have an HP PC, then run L3uninstall)
    6. When the uninstall has completed restart the computer
    7. Run Disk cleanup from Windows System Tools
    8. Download and install the latest version of Adobe flash player using the link below
    Adobe Flash Player
    9. Download the latest full feature software and drivers using the link below
    http://goo.gl/q2hE0
    10. Run the download to reinstall the printer
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Problems with HP All-in-One (4280)

    Okay, I have a new iMac. I connected my HP printer/scanner. The printer works fine but when I try to use the scanner I get an error message saying there is no USB connection.
    I've also tried installing the software and it hangs up at the device setup (final stage) every time.
    Anyone have similar problems? Anyone solve it? Any suggestions otherwise?
    Thanks,
    Todd

    I am visiting with my aunt for a few days who has the printer ( and the Mac) -
    first question she had was: why does this message come up when Mac starts -->
    "HP Photosmart 4280 printer not found in the printer list "
    I clicked on the Edit Printer List button... and it was already there -
    but knowing that things can get corrupted, I deleted the printer from the list
    and told it to add it again -- well, this seemed to work on restart --
    but I believe that message is reappearing now whenever she starts the Mac --
    wonder if there's an elegant solution to this ...
    the 2nd question she had was with printing from the memory card when it is plugged into the printer -- the 4x6 pictures we printed had better color and saturation than when we printed from the Mac -- used the same picture, same paper, everything ... but there was a distinct difference. Anybody else see this yet ?
    Thanks
    Doc Rock

  • Iphoto 08 Will not print 4x6 borderless prints to HP 3210xi All In One

    Hi Folks,
    I've just installed Iphoto 08 and upgraded to the latest version 7.1.2. I've also just installed the latest HP 9.7 Mac drivers released to support 10.5.2 on 2/4/08. However I can not get Iphoto 08 to print 4x6 borderless prints to my HP 3210xi All In One Photo Smart printer.
    I'd appreciate any feedback/suggestions from anyone who is able to get Iphoto 08 to print properly.
    Jim

    Jim:
    I don't have an solution but this printing problem with HD all in ones has been discussed many times. Do a search in this forum for HP All In One or HP 3210xi or other similar search terms and you'll find the various threads where it is discussed. I don't remember if a solution was found in any of them as I don't have an HP and didn't pay much attention.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Hp 8600 All in one printer problem with scanning through wired network its very slow!

    Hi
        i have problem with scanning thru network which takes almost more than 2minutes very slow compared to scanning when printer connected locally with USB.  i need some solution to fix this issue. Plz advise me what needs to be done prior to scanning? 

    Welcome to the community @Larrypat 
    I understand your printer is not connecting wireless and only connecting USB. I have some questions and ideas for you that should help. Let's get to it!
    Could you please remove the USB cable, run the Print and Scan Doctor again and send me a screen shot of the results from running the diagnostic tool?
    Also let me know which model from the C7200 series you have:
    HP Photosmart C7250 All-in-One Printer
     HP Photosmart C7280 All-in-One Printer
     HP Photosmart C7288 All-in-One Printer
    Try power cycling the network devices:
    Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
    Plug the router back in and wait another minute, next turn on the printer and computer. Run the Print and Scan Doctor afterwards and try printing.
    Let me know how it goes and the results
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Printing problems with InDesign CS3 running on OS 10.6

    I recently upgrade my old G4 Mac (OS 10.4) to a new Mac Mini running OS 10.6.6. I am still running CS3 and have encountered only one problem. When I print multiple copies documents from InDesign that contain several layers, each copy is processed separately, so that it can take several minutes just to send the print job to the printer if I'm printing over 20 copies. Then once the print job is processed the printer pauses between every copy, which is tripling the printing time. If I print a simpler document with only one or two layers it processes all the copies at once, as it should. I am printing on an Okidata 6150 color laser printer.
    I never had this problem on my old computer. I'm wondering if this is one of the "unsupported" bugs of running CS3 on Snow Leopard. I want to make sure that this is a problem unique to running CS3 with Snow Leopard before I go ahead and upgrade to CS4 or CS5.
    computer: Mac Mini core 2 duo 2.4 ghz processors, 4 gb RAM, printer: Okidata 6150 DN color laser printer.

    Hi again Peter
    It is version 5.0.4.  I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
    I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0.  I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it.  Then, when I got my new computer, I decided it was time to use the newer version.  However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader.  I contacted Adobe, and they sent me a patch which fixed it.  I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
    Richard
    Date: Tue, 15 Jun 2010 20:10:13 -0600
    From: [email protected]
    To: [email protected]
    Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
    I neglected to ask what version of indesign CS3 you are using. I also 
    notice that Mac OSX 10.6.4 has just been released. It actually 
    addresses some CS3-specific issues, though they seem to be related to 
    launching the apps, not printing. It may be worth trying to update, 
    nonetheless.
    Peter Truskier
    Premedia Systems, Inc.
    510-655-4454
    >

  • Default printer problems with adobe 10.1.2

    I was having problems printing PDFs since upgrading to 10.1.2.  After reading and trying many recommendations, I happened to notice that my default printer(I have only one printer) was listed twice on the print window.  The first (default) printer is spelled "HP PSC 2350 series" (upper case 'PSC')  The second is "HP psc 2350 series" (lower case 'psc') .  The printer is named 'HP psc 2350 series' in my printers and devices, and if I select this printer, the page will print perfectly.  Now that I have solved my printing issue,  I would like to change the default setting on the adobe print window to come up as the active link, so I don't have to continue to select a different printer everytime I wish to print a document.  The printer by the lower case "psc" name is set as the default printer in printers and devices, and I cannot figure out why it doesn't come up as the default printer on the adobe reader print window.  I also cannot figure out how to change the default in the print window.   An added interesting fact is that I get no response in the print window when I try to select "preferences' or 'advanced' for the upper case 'PSC' printer.
    My computer runs in Windows 7 (64-bit).  The printer is HP psc 2355xi all-in-one.  Any suggestions are much appreciated

    I have not been able to select a different default printer for Adobe,  but I can print if I manually select the correct link everytime.
    Date: Tue, 6 Mar 2012 13:16:52 -0700
    From: [email protected]
    To: [email protected]
    Subject: default printer problems with adobe 10.1.2
        Re: default printer problems with adobe 10.1.2
        created by AMG13 in Adobe Reader - View the full discussion
    I am having the same issue.The correct printer is selected as the default printer on the control panel and there is no driver with the lowercase convention.However, the first printer option that appears is the lowercase convention. Is there any way to select a default printer for specifically for Adobe, as opossed to the PC itself?
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4248912#4248912
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4248912#4248912. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Reader by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • How can I print to hp photosmart all in one 7280 from ipad

    How can I print to hp photosmart all in one 7280 from ipad
    This question was solved.
    View Solution.

    Hi,
    Although the C7280 is not AirPrint enabled, you may still print through the local network using the HP ePrint mobile app.
    you may find the steps to get and use the app in the following document:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3204785&tmp...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Where is the print button on my all in one

    where is the print button on my all in one pc i cant see it at the top of the page

    Hi,
    Hundreds of AIO models are out there, what is the model of your printer ? Where do you print from: from its card reader of from a computer ?
    Regards. 
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Why wont' my Iphone 4 print to hp 4500 all in one?

    I downloaded the Hp home&biz app to print to HP 4500 All in one printer.  
    I can print from Ipad, Itouch and MacBook Pro but not from Iphone 4.?????
    I have tried everything.
    Thanks.

    Hello dobis11011,
    You have verified a lot of common factors that can interfere with the printing method that you want to use.
    I would also try some additional steps, you can try to print after each step to isolate the causing factor:
    Verify Bluetooth is off (preferred setting).
    Power your iPhone off and then on.
    Press the home button twice and end the HP ePrint Home & Biz app from the multitasking section.
    Delete the app and re-download it from the Apple App Store, as it is a free app.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • How to print to HP PSC1110 All-In-One Printer connected to WinXP PC?

    Hello everybody,
    I would like to us an HP PSC1110 "all-in-one" printer connected to a Windows PC in another room.
    The easy part: The printer shows up in the browsing window, under the correct Windows domain, when I try to add an "other Printer" device.
    The difficult part: When I try to select the printer model from the list of HP printer models provided, it does not show up, although HP PSC 1110 is included in the list of supported printers.
    I also tried the ESP HP-deskjet drivers, both old and new version. But those result in printer errors on the Windows PC.
    BTW: Printing over the net works well from other Windows PCs!
    Can somebody out there who had a similar problem before give me a hint how to set up printing to an HP "all-in-one" over the Windows-Network?
    Thank you,
    Detlef

    Thank you for the detailed information. Maybe I should have added a few screenshots too.
    The suggested procedure probably works for a HP Photosmart Printer. However, the PSC1110 is a "Printer, Scanner, Copier" all-in-one device. Unfortunately, this one does not show up in the menus, although it is supposed to be supported. I assume that only an USB backend is available, but no SMB backend.
    Is this correct? Is there a workaround?
    Thank you for your feedback
    DC

Maybe you are looking for