Printing Problem with CS 6 extended and Canon Pro 9500

My prints are no longer coming out centered. I have the "center" box checked in the CS6 print dialogue box. The prints are not centered left to right or top to bottom.
This seems to be a problem since I upgraded to CS 6 extended and or newest print driver for my Canon Pro 9500.
I believe that since I did one or both of these changes there is a border (consitst of slanted hash marks around the perimiter of the print dialogue picture) in the preview of the print.
The border segments left and right are not equal and are very uneven in width. The top and bottom borders are closer but still not even in width.
Can anyone help me with this issue?
Thanks,
Dennis

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
You will be able to continue your current conversation with PECourtejoie without inturruption.

Similar Messages

Help resolving printing problem with v10.6.8 and Canon MP780 PIXMA

Hello,
My Canon MP780 PIXMA stopped being able to print text in black some months ago and having scoured the internet for advice I've discovered that this issue is not that uncommon. This printer uses 5 ink tanks 3 of which are for single colours and two of which are for different kinds of black ink. The tank responsible for printing black text (fonts) for some reason just won't do its job.
Amongst other people's online posts I found a workaround cheat to print black text (simply change the paper setting to Photo Quality or Double Sided Photo for printing either single or duplex printing).
But this uses up too much ink and is EXTREMELY slow.
I have read of the same issue using a different series of Canon printers - and apparently those Canon laser printers just needed an updated CAPT driver.
Tasks already attempted to no avail:
- cleaning the ink nozzles via the software utility
- print test via software utility demonstrates absent gridline pattern
- taken out print head and cleaned carefully with water then left to dry naturally before replacing
- removed Microsoft Word font folders from user library location then restarted my machine (in a desperate response to some advice given in this community to someone else experiencing the same problem but with a different printer)
- opened FontBook and resolved duplicate fonts and restarted my machine (there were about 5 duplicates)
- tried printing from TextEdit and Preview to see if Apple software was behaving differently to Microsoft Word and Adobe Acrobat - but still cannot print black text
I've had this printer for about 7 years and although it's a massive machine and doesn't have built-in proper networking, it makes scanning and printing massive documents so easy - well it did before the black text problem began - so I'd love to find a true solution rather than chuck it out and buy a new printer.
I run it from a MacBook 2GHz Intel Core 2 Duo, Version 10.6.8 via USB cable.
Thanks in advance for taking the time to read this.
Simone

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
You will be able to continue your current conversation with PECourtejoie without inturruption.

Wireless printing problems with 10.5.4 and Epson printers

Anyone else know about problems with Epson printers such as this no longer functioning wirelessly with bonjour once upgrade to 10.5.4? It appears they are not supporting this with a new driver yet?
At this time, Epson says they have no drivers for 10.5 and this specific printer but wondered if there are more general problems with 10.5.4 and bonjour with Epson or others?
Thanks
Paul
MacBook Pro Mac OS X (10.5.4) Using Epson CX11-NF printer

I have 5 computers-G4 PowerPC, two G4 12" laptops, G5 Mac Pro dual, Macbook Pro--with the older computers all running 10.4.11, the new ones 10.5.4. Until Friday, I was able to print with all of them to an Epson Stylus Photo R200 via Airport Extreme. After installing software for my new G3 iPhone on the G5 Mac Pro the printer connections on all the computers stopped working. I have so far been able to get the G4 Power PC to print, but none of the others. I have tried Bonjour, Gimp-print v.5.0.0-beta 2, cleared all the print drivers and restarted, and everything else I have been able to find on both Epson and Apple sites. The Printer Set Utility described by Epson does not exist in Leopard machines, and doesn't work for the older laptops. As soon as I select one of the printers in the "selected printer in print dialogue box" it grays out. I have set up sharing on the G4Power PC that does print, but it is not accessible--it shows up but is grayed out. There is a diamond next to the printers in the Print dialogue box in applications' menus, but it still doesn't work. It either cannot make the connection, cannot find the printer, or keeps spinning with the message that it is finishing printing (but it hasn't even started.) Again, everything worked fine until the new iPhone was added to the mix. My old iPhone didn't cause any problems. This is really a problem. Any suggestions welcome.

Printing problem with Epson R290 Illustrator and inDesign

I am running CS2 on Leopard and have recently purchased an Epson R290. The first time I used it with Illustrator and InDesign it worked fine but now whenever I print anything it prints a tiny version (about a sixth of the real size) of the design in the top left corner of the page. It does this both with new documents and old ones that used to print ok.

Since I posted the message about this problem I have discovered that it can be worked around by choosing a higher quality print. ie if you choose plain paper when printing from Illustrator or InDesign the printer prints a reduced size image but if you choose Ink jet mat or glossy the print comes out fine. I don't have this problem with Photoshop but that may be that I always print high quality from that application. I don't use Appleworks Draw so don't know whether this solves the problem for that application but iWork documents print ok.

Network Printing Problems with Windows 8.1 and HP 8600 Officejet Pro

I can not print or scan from my Dell 2720 after the system has gone to sleep. My printer shows as connected to my network. Most time I have to completely restart my PC to get it to work but even that doesn't correct the issue most time. I have removed and reinstalled the printer at least a dozen times and updated the drivers several times. Also another oddity - my router is a dual-band (2.4 & 5 GHz) and my printer only connects to the 2.4 GHz connection which I understand is normal but any device attempting to print must be connect to the 5GHz band or nothing will print. So essentially I have two problems. Any suggestions?

Hi @mhmost,
I would be happy to help you print to your 8600. Running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity:
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check: Checks for missing or corrupt driver files.
Device Manager: Checks for problems in Device Manager that would prevent printing.
Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match: Checks the port settings for the HP product.
Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
Print Settings: Checks and adjusts the print quality settings.
Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests: Checks the scan mechanism, drivers, and registry entries.
Source:Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor> >>>>> www.hp.com/go/tools
If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
If you see only green check marks (), the tool did not find any problems.
If you see green wrenches (), the utility identified an issue and corrected it automatically.
If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
If you see a red X (), follow the on-screen instructions to resolve the issue.
As for the frequency, you are correct, the printer will not work over the 5.0GHz frequency, only with the 2.GHz.I suggest disabling the 5.0 frequency, and running on only the 2.4.
Thanks, I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Printing Problems with Elements 8.0 and EXIF time data

I've been using Premiere Elements 8.0 in Windows XP Professional for a couple of years with no problems. I shoot mostly in JPEG. I've always imported my images using a card reader (the same one). About a year ago suddenly I ran into printing issues. When I imported my images and tried to print them Elements crashed just at the point where it should begin the actual printing. By chance I discovered that if I adjusted the time EXIF on the images in Elements by either hours or days, back or forward and adjusted them back to the original time/date the problem disappeared. If I had shot in RAW and edited these images there were no problems with the resultant JPEG.
I noted the discussions about Elements changing the time in the EXIF and checked for this but this hadn't happened. The EXIF in camera and in Elements were the same. I also checked this against the time settigs of the camera and they were the same. I shoot with a Nikon D300.
I backed up my images and did a complete re-format of my computer so that it was back to its ex-factory settings, re-installed Elements, restored my catalog from the backup and the problem still arose. I'm reluctant to upgrade to Elements 10 until I (hopefully) I find out if (a) anyone else has the same problem; and (b) if anyone who had it has fixed it.
Any ideas would be very welcome.

Miceal,
I am confused. Do you mean Photoshop Elements? Premiere Elements does not have a Print function. On can Export/Share, but not Print. For Photoshop Elements, you will want the PSE Forum.
Good luck,
Hunt

Printing problem with new Intel iMac and Indesign CS3

Hi there,
this might not be the right place to ask for, but has anybody here experienced printing problems in Indesign CS3 with Tiger?
I just installed the software and tried to print out of Indesign, but nothing. I can see on the panel that data is beeing received but no printing action. And this is just out of the new Indesing CS3.
Any suggestions?
Best
Rolf

Our office is printing fine from ID & PS CS3. This is from Intel & PPC Mac's running 10.4.9.
What is your printer and how is it configured for printing, ie USB or IP.
Also, have a look at the cups error log. You can find this via System Profiler > Software > Logs. This will show which process is failing for the spooled job. You can post it back here for more help.

Resolved Color Correction issue with MAC OS X and Canon pro 9000

Problem: Unable to set the Color Correction option to NONE. I have looked all over the net and it seems that there are lots of people with this problem. After months and months of battling with this issue I have finally come up with the answer. Its all down to the fact that MAC OS X comes with a pre installed driver for the Canon Pixma Pro 9000. To cut a long story short this driver needs to be deleted from your system files before you update your driver, which you need to download from the canon website. I downloaded version 4.8.6. The new driver does not seem to work with the default driver still on the comp. After following directions below you should finally be able to get your Color Correction option on your driver working.
First things first... go to the following location and delete the canon pro 9000 driver.
Location: /Library/Printers/PPDs/Contents/Resources
File Name: CanonIJPro900series.ppd.gz
(make a backup of this file if you wish )
Once you have deleted the driver you need to restart your mac.
After rebooting install the new Canon Pro 9000 driver. I suggest installing version 4.8.6(this one worked for me)
Reboot Mac again just for good measure then do a test print and you should now be able to set COLOR CORRECTION to NONE.
I know there are a lot of people out there having the same problem so if you are reading this please pass the solution on to others.

Hi Japamac,
Indeed a new cable just bought solved this problem.
Still wandering why my MacbookPro was able to print and my PowerMac not, maybe another driver issue?
Thank's anyway for your reply.

Printing problem with Macbook, Airport Express and new Canon IP4600

Just set up new printer, a Canon ip4600. Adding printer in System Preferences to my flat-screen iMac, I got it working using the Airport Express. But trying the same thing with the Macbook (2.4 GHz Intel), can't get it to print. (Both worked fine with previous Epson printer.) I fear it's a network issue, not sure what to do. Any suggestions will be appreciated.

For each of the AirPort Express Base Stations (AX), did you also change the "iTunes Speaker Name" on the Music tab when using the AirPort Admin Utility? Is this the name you're referring to from iTunes?

Printing Problem with HP LaserJet 1022 and OS 10.4

I am having a problem printing one page of a document on my HP LaserJet 1022 with OS 10.4. All other documents seem to be printing fine, but when I try to print one particular page of a 90 page WORD doc, that page consistently comes out with a big black streak across it and it does something to the printer because all the lights start flashing.
I have powered off, unplugged, reset the printer subsystem, reinstalled the printer driver, and even tried to print on my laptop, and the same thing keeps happening. The document printed for me fine a few weeks ago.
Any suggestions on a work-around for this or a permanent solution? I really need to print this page on my printer ASAP. Thank you.

The page looks perfect in preview and as a PDF. I can't print from the PDF, however, because it shrinks the text and expands the margins ...
Something's fishy. Save as PDF should result a file that looks exactly, precisely, like what you'd get if you printed directly to your printer.
I suspect your Word document has been corrupted by a few bytes of random data that is causing your printer to go nuts. Try cutting that portion out of the document, and pasting it in a new blank document so you can incrementally isolate the damage.
This isn't going to be as easy as it sounds, because when the PostScript printer driver encounters the errant code in the Word document, it's essentially telling the printer "now, go to the top of this page, print a nasty black smudge, and then crash." You might have to cut a whole page before and after the suspected corruption. If you're lucky you might be able to cut the portion then paste it right back as "unformatted text". Try that.
BDAqua wrote:
I'm not familiar with Word,
We should all be so fortunate. Word does use the standard OS X Print dialog though.

Printing problems with HP laserJet 1320 and new Intel iMac

My new Intel iMac won't print to my HP 1320 from Eudora or from web browsers. The applications "quit unexpectedly". From Safari, nothing happens.
I can print PDF documents and Office documents with no problems. The Intel is connected to a router via Airport. The printer is connected to the router via Ethernet. My old G4 iMac prints fine (connected to router via Ethernet) as does my G4 laptop (connected via Airport).

A post from another threat that might help.
From Payson
Solution!!!
Just spent 90 minutes with some nice folks in level 1 and level 2 support.
Problem seems to be that I used migration utility to import the soul of my old machine into the new machine. When you do that, you bring along the old print system (PPC vs Intel).
I had upgraded to 10.4.5 after the migration and assumed that it would correct any problem like that, but it had not.
After a great deal of trial and error, the solution was to go to move disk/library/printers to the desktop and restart the system
Then use the the install disk 1 that came with the iMac and use the OPTIONAL INSTALLS package to reinstall the printer drivers.
Worked like a champ.
Suspect similar problem might happen for any of you with I/O drivers.

Printing problems with 10.4.4 and Freehand

Hi everyone
I am new to these forums and so please bear with me.
I am running OSX 10.4.4 on a G5 iMac and am having problems printing from FH10. Whenever I go to page setup for print, the page just hangs and then the prog quits.
The problem seems to be across all printers as I have tried it on an HP inkjet (PSC1210) and also a Brother Laser priinter both with the same outcome.
Other progs print fine so it is defo FH specific or related to FH and OSX 10.4.4 upgrade
I have tried remaking prefs and reloading software and even resetting the printing defaults in OSX but the problem still persists.
Does anyone have any experience of this?
I have another copy of FH on a G4 tower running OSX 10.4.1 and that has the same effect. It would appear the problem raised its head about the time of the last OSX upgrade to .4.1.
Many thanks... all ideas gratefully received as at the moment I am pulling my hair out - Oh, I am also posting this on the apple site too. Thx
Cheers
Tim

I would suggest you do a clean install of the software from the install dvd's then reapply the 10.4.5 update. Then repair permissions and see what happens. If you have any 3rd party software. Don't initially install it. If you don't have any problems after the clean install, then install one product at a time, testing the system inbetween, this way you should be able to isolate what is causing your problems.. Hopefully the clean install will clear your problems completely.
Glor

Printing problem with OSX 10.9.4 Mac Pro

I just bought a MAC A retina display with OSX 10.9.4, but it can not print. I use a canon Printer MX 397 Series (Fax/Print/Copy/Scan), after following all the instruction given by The Help Menu and from Internet, still can not works, I already updated the software that I just downloaded from canon website, but it did not work.
This printer works very well with my other laptop using windows OS.
I did not know what went wrong with my MAC, somebody please help me to solve this problem.
The only thing that work was The scanner, but still the doc was nowhere to found

Try resetting the printing system.
OS X Mavericks: Reset the printing system

''Printer Offline' with Samsung ML 2851ND and Macbook Pro via USB

Running Snow Leopard 10.6.8. The printer was working well, but I disconnected the computer and when I reconnected, it would not print. The print dialog box says the printer off line and the printer is puased. When I hit resume, it says 'unable to send print data. I downloaded the most recent printer driver, but that did not help. I erased all the printer drivers (control click in the list of printers) and put them back in, restarted, and that did not work either. I 've checked the USB cabling, which worked fine before I took the laptop to another location.
The printer starts up. One time it spit out the following:
RROR syntaxerrir
OFFENDING COMAND: --NOSTRINGVAL--
STACK:
/SH2
TRUE
-SAVELEVEL-
TRUE
FALSE
Thanks for any help you can give.
Tom Roehl

Still no luck. From everything I've read, it's not possible on Samsung's end (meaning by tinkering with the phone) to sync the phone with a Mac in any way. iPhoto opens when I Plug it into my laptop, but that's it - I can't actually import any pictures, the phone doesn't show up as, for instance, a removable disc. iTunes does not open up. I was hoping there's something I could do on my laptop that would allow it to read the phone...but it's seeming like it's a lost cause.

Major Problems with Captivate 5.5 and Connect Pro

I have a bunch of quizes that have 30 random question slides. Each slide pulls from various question pools. All of these quizes where created in Capitivate 5 and converted to Captivate 5.5.
My problem is that Captivate 5.5 is corrupting my quizes and preventing me from posting them to my Connect Pro server. If I fix the quiz to where it will post CAptivate 5.5 will eventually corrupt it again.
When I try to publish I get a "Failed to publish your project to the Connect Pro Server. Verify your Network Connection and then retry."
Also Connect Pro starts throwing up errors about my number of concurrent users has been exceeded. That is impossible since I have not release any training yet to anyone other than myself.
I did not have any of these problems until I upgraded to Capitvate 5.5.
I am about about two more errors away from abandoning Elearning as a career and going back to marketing and design. I have not seen one elearning product out there adobe or not that's not riddled with bugs. I though using Connect Pro and Captivate together would work because they are both made by Adobe.
ANy Ideas? I at the edge.

I just realize something. If I open a CP 5 file with quizzes save as a CP 5.5 with out making changes to the quiz it will publish with no problem. However if anything is changed on any question pool slide the project will no longer publish to Connect.
Every question has to be changed because Captivate 5.5 messes up all of the text alignment and some of it runs off the stage area and is not visible.
This is ridiculous. I should not have to rebuild all of my project files every time I upgrade.

Printing Problem with CS 6 extended and Canon Pro 9500

Similar Messages

Maybe you are looking for