Printing problem with HP Color Laserjet 3000 printer

I am using HP Color Laserjet 3000 printer, it is configured in SAP ECC6  with SPAD with device type "HPLJ4    : HP Laserjet 4 series PCL” and access method = “L: Print Locally Using LP”
At HPUX level printer in configured with proper driver also.
When I print from SAP, I get following error
"Invalid option, Please refer to MAN page for valid options" as attached
Other then above line , nothing else comes
Please help,
Al Mamun

Hi,
Make a try using the device type HKSAPWIN and the access method is front end prinitng.
Also make sure that you are able to take the print out using the os(printer should be configured at os level first).
Regards,
Vamshi.

Similar Messages

  • Printing problems with HP  Color Laserjet 1500L

    Can anyone please help me with the following problem?
    The printer will only do the first job. After that it refuses to print. The job stops, remains in the queue, and cannot be started.
    Or…it looks as if it sends the print information to the printer – the green light of the printer flashes – but nothing further happens. The queue is empty and the job’s name even appears in the completed section.
    The HP 1500L and the USB port are visible in the System Profiler. I have downloaded and installed the latest driver and did run Repair Disk Permissions.
    I can only print again after I restarted or unplug and (re)plug the USB cable (not always). The cable is not faulty...but I'm going crazy.
    I am new to the Mac world. The MacBook Pro being my first (and the way it looks definitely not the last--wonderful machine).
    Any suggestions?

    To use the OS X standard network protocols (Windows/IP printing), you must have either a postscript printer (the driver in that case is just a ppd for the OS X postscript output) OR, a driver designed to work with CUPS (CUPS driver). HP doesn't provide CUPS drivers for OS X (who knows why, since they do for linux).
    You need to install foomatic and ESP ghostscript:
    http://www.linuxprinting.org/macosx/foomatic/
    then, install the foo2oak driver:
    http://www.linuxprinting.org/showprinter.cgi?recnum=HP-Color_LaserJet1500

  • Smallest Paper Size ability for the HP Color LaserJet 3000 Printer

    Hello all,
    I presently have a colour laser that will not accomodate a coin envelope sized 3.25"x4.25".  I also have slightly smaller envelopes but can print on labels for those.  
    I am looking at purchasing a GOOD laser printer that will accomodate the required coin envelope size and wonder if the HP Color LaserJet 3000 coud do the job?
    If not, could you recommend one?
    Thanks in advance!

    This is a known problem and will most likely have to wait for an update from Apple.
    http://discussions.apple.com/message.jspa?messageID=5685294#5685294
    http://discussions.apple.com/message.jspa?messageID=5684428#5684428

  • Problem with installing HP LaserJet 1102 printer driver

    Hi there,
    I have got realy annoying problem with printer driver installation on HP LaserJet 1102.
    Basically I downloaded driver from the website and tried to install printer. When the installation is almost done, the message pops up(image attached).
    I've checked printer spooler service, tried almost everything. 
    Any suggestions/ideas? 
    Thanks 
    Minhoquinho

    I would suggest going into your control panel and uninstalling everything associated with the p1102, rebooting your computer and trying a fresh install.
    If this does not solve the install issue, please repost and error message along with your OS so that we may better help you.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Printing Issues With HP Color Laserjet CP5520

    In my office HP Color Laserjet CP5520 is installed. It is attached with network. Some of the user cannot send a print and some user can send print. IP is fixed for printer. Can anyone help me.

    can anyone solve this problem

  • Problem with HP Color LaserJet 2840

    Hey guys, first post here woot woot haha
    Now to business
    I have a macbook with osx 10.4.11, and an HP Color LaserJet 2840. I can't get it to print through USB.
    This guy on the HP forum had the exact same problem
    http://forums13.itrc.hp.com/service/forums/bizsupport/questionanswer.do?admit=10 9447627126316290000128353475&threadId=1198993
    The thing is, I can't call Apple like the guy on the HP forum did. I need your help to solve my problem!!
    Thanks a lot, and take care!!! ---Arthur

    Hi Arthur, and a warm welcome to the forums!
    Sometimes you need to habd uninstall hp drivers, but Might try these two...
    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    Might try Printer Setup Repair 5.1...
    http://www.fixamac.net/software/index.html
    Do this before & after any install...
    Safe Boot. One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Reboot.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

  • Problem with hp color laserjet c1515n

    I have problem with my HP color laserjet C1515n it prints in different shades printing jumps prints magenta at one place and cyan at one place and yellow at one place.....its printing is jumping.....to know the real problem it was better to attach a print copy but there is no option to send any attachment to u....kindly help to solove the issue.

    Hi Arthur, and a warm welcome to the forums!
    Sometimes you need to habd uninstall hp drivers, but Might try these two...
    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    Might try Printer Setup Repair 5.1...
    http://www.fixamac.net/software/index.html
    Do this before & after any install...
    Safe Boot. One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Reboot.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

  • 10.6.8 Printing problem with HP Photosmart premium C310 printer

    I hvae a Photosmart Premium C310 printer which is connected wirelessly to my network. I also have a Mac Pro which is connected to the same network by ethernet cable. Up until I updated to OS10.6.8 everything worked fine. After that I found that when I restated the printer I could see it for a short time under the printer list but then it seems to "time out" and I can no longer print to it within a couple of minutes from my Mac Pro. When I restart the printer I can also see its embedded web page again for a few minutes but then it becomes not visble.
    I also own a Macbook pro and two iphones and an ipod touch and all these wireless devices have no problem with seeing the printer and printing to it at any time. The Macbook Pro is also updated to 10.6.8 and works fine with this printer.
    It would seem that the issue is not with wireless devices but with a wired device printing to this wireless printer even though it is on the same network and on the same subnet mask.  All that has changed between working fine last week and not being recognised this week is an update to OS10.6.8
    I have restarted the Mac Pro, reinstalled the latest HP software and reset the printers wireless setup but this makes no difference.
    Is this a similar issue to what others have been reporting about a bug with printing under 10.6.8 or possibly something else. Any help here would be appreciated as I have no way of printing from my Mac Pro right now.

    Pengtao, I have plugged my Macbook Pro into the network (with Airport off) and I can no longer reach the Photosmart printer. Remove the cable and go wireless and the Macbook Pro can reach the printer again. I have installed the photosmart printer software under Windows 7 using Parallels on my Mac Pro and have no problems finding the Photosmart printer from it.
    To make matters worse I have bought a new Laserjet M1536 today and install it on my network. Again I get the same issues. I can print to it from any wireless device on the network but cannot reach it on any wired device on the network.Switch the printer off and on and I can see it and print to it for about a minute then it becomes "offline" to my Mac Pro
    Given that it works fine under Windows 7 from a Mac Pro I have to conclude that the issue must be OSX 10.6.8 and nothing else as everything worked fine before the upgrade. I have turned all device off and on , checked all cable connections and also uninstalled and reinstalled all printer drivers on the Mac Pro and cannot get it working. Any advice you may have that may solve the problem beyond it being an OSX issue will be greatly welcomed.

  • Problem with HP Color laserjet CP1515n !

    Dear anyone,
    My HP Color laserjet CP1515n is running wilde, because it prints every single page with black stripes on the margin. I have tryed to start the cleaning mode several times, but it does over and over again...
    Please, hase anybody any experience  regarding to such behaviour?...
    Thanks a lot
    /E 

    Hi - I have not seen this issue, but let me see if I can get some more information in order and try to help.
    (1) Are the stripes running vertically down the page, or are they running horizontally across the page?  If running horizontaly across the page, what is the distance (in millimeters) between each defect?
    (2) Is the product (and cartridges) new?  Did the product (and cartridges) ever work normally?
    (3) Please print 5 pages that have color and then print 5 pages that only have black and white text.  Do you see the defect on all 10 pages?
    These types of issues are difficult to troubleshoot without seeing the defect, but maybe I can offer some help based on the answer you give.

  • Wireless printing problem with hp officejet 100 mobile printer from win 7 dell laptop

    My hp officejet 100 mobile printer was working fine with my dell XPS 15 in bluetooth wirelessly until my laptop crashed. Now I can not get it to print internet info except with hard wire connection. Page loads half way and then stops. Must shut down laptop and shut off printer or hard wire and shut off bluetooth. down loaded lastest drivers to no avail. printer will print from cell phone and win 8 computer via bluetooth but not win 7 laptop.

    Sorry you are having problems with printing from the internet.  I have a few more questions to ask you before I can be of much assistance.
    What web-browser are you using?  
    Do you have any problems printing from Word or other non-internet documents?  
    What did you do to fix your computer (system restore, clean install of the OS, etc)?  
    Have you tried an alternate web-browser?
    Make sure to install all of your Microsoft updates to see if that helps.  Otherwise, answer those questions for me please and I will be happy to help.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Problem with HP color laserjet CP3505

    Hi all, 
    I am having a Problem with my printer CP3505, i fitted this printer in my network and it is printing perfectly good at first even from my Mobie (S4) and other systems in my network, but recently a problem  started its printing only from one laptop. when i send data to print either from my mobile / or from any other device the data indication on the front panel of the printer keep blinking and after some time an error appears saying cant connect to the printer.
    can some one help me out.
    Many thanks

    Hi KKRahul, and welcome to the HP Forums.
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Printing problem with 8.0.  videos printing on paper

    I have used acrobat 6.0 for years, and have made many forms for my customers. When I made these forms with 6.0 I put videos on the forms to explain how to use the forms then when they print them the videos are not printed. However now that I have purchased acrobat 8.0 these forms are printing the videos on the paper. I do not know why this was not available on 8.0 as it was on 6.0. Why was this not continued from 6.0 to 8.0. Is there a hot fix or something that can solve this problem for me? Has anyone else came across this problem? any help would be appreciated. Thank You.

    Thanks for your response.   I may not have emphasized in my initial outline that all my other programs print fine on the Epson 7890; only printing from Photoshop is problematic.  Do you still think it is an Epson problem?

  • Wireless printing problems with Canon iP4300, but USB printing ok

    My MacBook Pro is setup for wireless printing with a printer(Canon Pixma iP4300) connected to my other PC Desktop. The only problem is that when I print anything all the text and images are miniaturized and squished about a quarter of a page large into the upper left corner of an 8.5x11 paper. I installed all the programs that came with the printer installation disk and when I connect my MacBook directly to the printer via USB everything prints out just fine.
    I suspect the problem is with the selection of printer model when you go to "Printer Setup" in System Preferences. The existing list of Canon printer models given to me by the computer does not contain anything specific for my iP4300. I simply chose the option "BJC 4300 Gimp-Print v.5.0.0-beta 2". Does anyone know of a way where I could add to that list of printer models or is there another way to get my wireless printing to work normally? Thanks to anyone who can help.

    I have the same printer and network printing is a pain. Canon decided not to include a network specific driver for this printer.
    You can try getting the latest version of the gimp-print drivers. The latest version has better support for ip4300. If it's worth it to you, PrintFab drivers have been working for me but PrintFab isn't free.
    The latest Gimp-print (Gutenprint) drivers are here: http://gimp-print.sourceforge.net/MacOSX.php3
    Hope that helps.

  • Printing problem with the HP LaserJet 100 color MFP M175

    I have recently upgraded to Windows 8.  When running Windows 7, I could print as may documents from Word or Excel as  I wanted.  Now, with Windows 8, I can only print one document.  When I try to print another, the program freezes.  The only way I can print another document is to restart the computer.  Any ideas?

    Hi,
    Have you installed Driver and software on your Windows 8 machine ? Please download from the following link:
      http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=5076​...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • PDF printing problems with Canon Color C3220

    I'm having an issue with our Canon Color Imagerunner C3220.
    When I send a PDF from Acrobat Professional 7.0 from a Mac to the
    Canon I get a rule that overprints an image. The image should be
    knocking out the rule. When I print from a Windows machine it
    prints fine. The PDF also looks fine on screen. Our printer was
    just upgraded to a C2 rip which I believe may be the culprit but am
    not sure. Canon did some troubleshooting and says the problem lies
    with the way the Mac interprets the PDF output going to the Canon.
    These PDFs were made from InDesign CS2 and Distiller 7.0. Other
    then sending from a Windows machine, does anyone have an idea for a
    Mac fix?

    I am seeing the same magenta cast (primarily in areas of yellow tones) when printing to an ip4000 on Photo Paper Glossy II using any of the Canon profiles (I've tried them all, one by one).

Maybe you are looking for