Printing Problem with HP J4580 in Windows 7

Hi there,
I have an HP J4580 printer (it's an all-in-one machine). I had Windows XP and everything worked great.
Last week I installed Windows 7 (Home Premium) and since then the printer acts very weird - once I print something it start printing, can be one line, two lines, half a page but at some point it pauses.
The printer says "Printing..." but nothing happens. It takes about 4-5 minutes until the printer starts working again and prints another line (sometimes even not an entire line) and then pauses again.
I tried to install the Full driver pack and it didn't help. I also tried changing the USB slot, restart the computer, turn the printer off and on.... nothing.
So the situation now is that I can't print at all.
Is it a known issue? is there a fix/workaround?
Thanks,
Shay.

Hi Shay,
Have you tried uninstalling the driver and then re-installing this driver from the following link click here.
Let me know if this helps.
Although I am an HP employee, I am speaking for myself and not for HP

Similar Messages

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Printing problems with hp laserjet 1018

- printing problem with my hp laserjet 1018 (no *.pdf files!), all other documents were printed
- hp photosmart premium c309 works with all file types
Windows 7 64 bit
Adobe Acrobat Pro 10.1.7
Acrobat Reader 11.0.3

Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

Printing Problems with PDF - Adobe Acrobat

Printer - HP Deskjet 3070A
Laptop - Asus Zenbook running Windows 7 Home Premium
Issue: Printing problems with PDF (Adobe Acrobat Reader)
Dear All,
Please help!
My printer was working absolutely perfectly until my brother in law recently needed to borrow my printer. He plugged in his laptop running Windows 8 (awful thing that is). Since he did this to print his own PDF, I cannot print mine.
Although all the text will appear on the page perfectly both in the document view and on actual printing, it appears that some of the transparent formatting stuff on a PDF - such as boxes you have to fill in and transparent areas (such as you find on glorious tax forms) are omitted completely. In fact, in their place I was getting a single black dot. Now, after uninstalling and re-installing updates for the printer, windows 7, adobe acrobat reader, etc.etc. I get squat. Just all the text laid out but none of the shading or boxes.
I have tried fiddling with the printer settings; the print as 'photo' option, dpi settings, greyscale - as much as I can think of and I am thoroughly stumped.
In a desperate attempt, I even installed the Universal Printer Drivers - thinking it might have been that. No. All I got was a page of gobbledygook. Consequently, I uninstalled and reinstalled the normal drivers again.
If there are any wonderful people out there with any fabulous ideas about how I can get my shading and boxes back; I'd very much appreciate it. Sadly I have a tax return to fill out (which is already fabulously late) and need my printer to work!
Much appreciation in advance x

Hey there @Reverie!
Thanks for posting on the HP Forums!
I can see that the printer is no longer printing in the correct format after it was plugged into the Windows 8 computer! You mentioned you have run the updates and uninstalled/re-installed the printer software. Have you uninstalled and re-installed the Adobe software? Are you getting the same issue from other programs as well? Are you getting the same issues if you are logged in as a different user on the computer?
I have located the HP Update Software Utility that may be able to help. You can download an run the utility. It may be able to locate any other updates for the printer.
I would also recommend running a disk cleanup on the computer to clear any temporary files and junk files that may be causing some performance or software issues. If you do not know how to run a disk cleanup on the computer please follow this document regarding Delete files using Disk Cleanup. It is recommended to restart the computer after a disk cleanup. After the restart try the print job again!
Let me know if that helped and thanks again for posting on the HP Forums!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Default printer problems with adobe 10.1.2

I was having problems printing PDFs since upgrading to 10.1.2. After reading and trying many recommendations, I happened to notice that my default printer(I have only one printer) was listed twice on the print window. The first (default) printer is spelled "HP PSC 2350 series" (upper case 'PSC') The second is "HP psc 2350 series" (lower case 'psc') . The printer is named 'HP psc 2350 series' in my printers and devices, and if I select this printer, the page will print perfectly. Now that I have solved my printing issue, I would like to change the default setting on the adobe print window to come up as the active link, so I don't have to continue to select a different printer everytime I wish to print a document. The printer by the lower case "psc" name is set as the default printer in printers and devices, and I cannot figure out why it doesn't come up as the default printer on the adobe reader print window. I also cannot figure out how to change the default in the print window.   An added interesting fact is that I get no response in the print window when I try to select "preferences' or 'advanced' for the upper case 'PSC' printer.
My computer runs in Windows 7 (64-bit). The printer is HP psc 2355xi all-in-one. Any suggestions are much appreciated

I have not been able to select a different default printer for Adobe, but I can print if I manually select the correct link everytime.
Date: Tue, 6 Mar 2012 13:16:52 -0700
From: [email protected]
To: [email protected]
Subject: default printer problems with adobe 10.1.2
    Re: default printer problems with adobe 10.1.2
    created by AMG13 in Adobe Reader - View the full discussion
I am having the same issue.The correct printer is selected as the default printer on the control panel and there is no driver with the lowercase convention.However, the first printer option that appears is the lowercase convention. Is there any way to select a default printer for specifically for Adobe, as opossed to the PC itself?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4248912#4248912
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4248912#4248912. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problems with shutdown, expose and window switching

Hi there,
Recently I've been having a few issues with OS X. First of all it wasn't shutting down properly -- the menu bar would disappear and it would look like it was going to shutdown, but it never did. I could move down to the dock (on auto-hide) and it would re-appear, at which point I can bring up a terminal window and use 'shutdown' to do the job. On startup I'd reset the PRAM, and then do a disk-check, but the problem keeps coming back.
Subsequently, I've also been having problems with expose and switching windows (i.e. command-tab). Namely, neither of them work. Expose won't fire from either hot corners or the keyboard, and if I re-launch the app from the Apps folder (without trying to kill it first, I should say), it does nothing. Cmd-tab gets interpreted as just tab, and the keyboard shortcut for dashboard also fails (although I can start the dashboard from the dock).
I read in another post about an invalid jpeg in the downloads folder being able to cause the Expose problem (seems like a most unlikely bug?). Anyway, I cleared all pictures from my downloads folder and functionality came back, but now it's gone again. It's really very frustrating as it makes moving between windows a lot more hassle.
Any thoughts would be gratefully received.
TIA,
Mat

This sounds interesting.
Can you post a copy for the rest of us to see?
As for actually helping you, and not just satisfying our curiousity, if you start cutting pieces of the code you will probably end up finding the source of the problem (and we won't have too big a program to handle). Since DSC is a likely suspect, you may want to start there.
Also, are you creating an installer and using that to install? If not, you may wish to try that.
Try to take over the world!

Printing problems with InDesign CS3 running on OS 10.6

I recently upgrade my old G4 Mac (OS 10.4) to a new Mac Mini running OS 10.6.6. I am still running CS3 and have encountered only one problem. When I print multiple copies documents from InDesign that contain several layers, each copy is processed separately, so that it can take several minutes just to send the print job to the printer if I'm printing over 20 copies. Then once the print job is processed the printer pauses between every copy, which is tripling the printing time. If I print a simpler document with only one or two layers it processes all the copies at once, as it should. I am printing on an Okidata 6150 color laser printer.
I never had this problem on my old computer. I'm wondering if this is one of the "unsupported" bugs of running CS3 on Snow Leopard. I want to make sure that this is a problem unique to running CS3 with Snow Leopard before I go ahead and upgrade to CS4 or CS5.
computer: Mac Mini core 2 duo 2.4 ghz processors, 4 gb RAM, printer: Okidata 6150 DN color laser printer.

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Printing problem with Summarize Comments?

Printing problem with Summarize Comments in Pro 10.1.6? When I print, I only get the number boxes on one page and the comments on the next page. The numbered boxes don't show up on the actual image itself.

Um I dont know if im doing something daft but I tried this like you said
PrinterJob printJob = PrinterJob.getPrinterJob();
printJob.setPrintable(this);
if(printJob.printDialog()){
try {
          PageFormat pageFormat = printJob.defaultPage();
          if (pageFormat.getOrientation() == PageFormat.PORTRAIT) {
          landscape = 0;} else {
               landscape = 1;}
          System.out.println("THE ORIENTATION IS "+ landscape);
          printJob.print(); }
catch (Exception PrinterExeption) { PrinterExeption.printStackTrace();}
and it doesnt seem to work as I tried it both as landscape and portrait in the print dialog but landscape is always 0.
cheers
pmiggy

Printer problem with AW 6.2.9

I have a recurring printer problem with both hp deskjet 5150 and Epson R220. After much work with techs at both, we have determined that it is an AW problem (v. 6.2.9) Other files print okay. I've searched through recent posts and found similiar questions, but the answers aren't specific to my problem. I gather that it involves trashing certain AW files, such as Appleworks.plist and other Appleworks prefs. It will help it I know the specific files to trash and as much detail about how to find them on the HD. I will be infinitely grateful for any help.
OSR
Mac G4 Mac OS X (10.4.6)
Mac G4 Mac OS X (10.4.6)

Welcome to Apple Discussions
You are correct that deleting the AppleWorks preferences can fix some printing problems. I'm surprised that in finding that information you didn't come across a post with the specific information or a tip to my user tip, AppleWorks has stopped working correctly, that explains which preference files ot delete.
Make sure you have the newest printer driver for each printer. Also, use Disk Utility to repair permissions after any system update or upgrade.

Problem With Captivate 4 and Windows 8

Hi,
I've a problem with Captivate 4 on Windows 8 projects :
The mouse is not tracked.
I've applied the last patch for this version (11/15/2011).
Is there another patch for this ?
Thanks a lot.

Hi there
I know this will come off as sounding snarky, but please know it's honestly not intended that way,
Windows 8?
I never was able to make Captivate 4 run successfully on Windows 7. So I'm not the least bit surprised to hear it has issues with Windows 8!
Personally, I'm thinking you are due for an upgrade to Captivate if you want it to work on Windows 8. But then again, I'm not even certain if Captivate 6 is Windows 8 compatible.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution

can anyone help
i have a problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution when i lauch photoshop cc everything is very small and i dont know how to get the program at the right size

Search the forum for similar topics dealing with high-DPI displays. 4k is insane, though. I don't think even CC 2014 is up to it.
Mylenium

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1?

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1. Why am I having this problem?

You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Problem with national characters on windows client

Hello there,
I'am having problem with national characters on windows client.
All national data stored in NVARCHAR2 colums, applications (.net) works fine,
but in sqlplus:
select city from test_table;
- everything ok, sqlplus shows national characters
select dump(N'<national symbols>') from dual
- returns
Typ=96 Len=12: 0,191,0,191,0,191,0,191,0,191,0,191
select * from test_table where city = N'<national symbols> '
- always returns nothing
As i understand the problem in
sql query text (and national literals) convertion
to servers "WE8ISO8859P1" encoding, Is it possible
to solve the issue?
Thanks in advance
PS.
Console in right mode (chcp=1251)
sqlplus shows russian messages well
Server (oracle 9 on solaris):
select * from nls_database_parameters
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_SAVED_NCHAR_CS WE8ISO8859P1
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET WE8ISO8859P1
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZH:TZM
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZH:TZM
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_RDBMS_VERSION 9.2.0.6.0
Client (windows server 2003, oracle client 10):
NLS_LANG = RUSSIAN_CIS.CL8MSWIN1251

N'<national symbols>', being part of an SQL statement, will be converted to the database character set (WE8ISO8859P1) before being parsed. Only if the client and the database are both 10.2 or higher, the client can encode the literal appropriately so that it survives this conversion.
In earlier versions, you can do the encoding yourself. Instead of the N'<national symbols>' literal use the UNISTR function: UNISTR('\xxxx\yyyy\zzzz'), where U+xxxx, U+yyyy, U+zzzz are Unicode code points of your national characters.
-- Sergiusz

Problem with the audio editor window into logic pro X

hello everybody, I have a problem with the audio editor window ! the "onglet" (sorry I don't know the word in english) "file and track" doesn't appear in the top of the audio editor window ! I can just make no destructive data, I have no access to Normalize and others audio fonctions ! could you help me ? in advance I thank you
Alain

'onglet' - great, my favorite when visiting restaurants in France!
Anyway, I think you have to activate Advanced tools first:
http://help.apple.com/logicpro/mac/10/#lgcp5cbf192f
Have a nice day!

Printing problems with InDesign CS3 with Mac OS 10.6.3

I am not new to InDesign... I have CS3... but I am brand new to Mac Snow Leopard (OS 10.6.3). Although I can open CS3 and use the application, I cannot print with it. None of my other applications has printing issues... just CS3. Any suggestions?
Richard

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Printing Problem with HP J4580 in Windows 7

Similar Messages

Maybe you are looking for