Printing Problem with HP LaserJet 1022 and OS 10.4

I am having a problem printing one page of a document on my HP LaserJet 1022 with OS 10.4. All other documents seem to be printing fine, but when I try to print one particular page of a 90 page WORD doc, that page consistently comes out with a big black streak across it and it does something to the printer because all the lights start flashing.
I have powered off, unplugged, reset the printer subsystem, reinstalled the printer driver, and even tried to print on my laptop, and the same thing keeps happening. The document printed for me fine a few weeks ago.
Any suggestions on a work-around for this or a permanent solution? I really need to print this page on my printer ASAP. Thank you.

The page looks perfect in preview and as a PDF. I can't print from the PDF, however, because it shrinks the text and expands the margins ...
Something's fishy. Save as PDF should result a file that looks exactly, precisely, like what you'd get if you printed directly to your printer.
I suspect your Word document has been corrupted by a few bytes of random data that is causing your printer to go nuts. Try cutting that portion out of the document, and pasting it in a new blank document so you can incrementally isolate the damage.
This isn't going to be as easy as it sounds, because when the PostScript printer driver encounters the errant code in the Word document, it's essentially telling the printer "now, go to the top of this page, print a nasty black smudge, and then crash." You might have to cut a whole page before and after the suspected corruption. If you're lucky you might be able to cut the portion then paste it right back as "unformatted text". Try that.
BDAqua wrote:
I'm not familiar with Word,
We should all be so fortunate. Word does use the standard OS X Print dialog though.

Similar Messages

Printing problems with HP laserJet 1320 and new Intel iMac

My new Intel iMac won't print to my HP 1320 from Eudora or from web browsers. The applications "quit unexpectedly". From Safari, nothing happens.
I can print PDF documents and Office documents with no problems. The Intel is connected to a router via Airport. The printer is connected to the router via Ethernet. My old G4 iMac prints fine (connected to router via Ethernet) as does my G4 laptop (connected via Airport).

A post from another threat that might help.
From Payson
Solution!!!
Just spent 90 minutes with some nice folks in level 1 and level 2 support.
Problem seems to be that I used migration utility to import the soul of my old machine into the new machine. When you do that, you bring along the old print system (PPC vs Intel).
I had upgraded to 10.4.5 after the migration and assumed that it would correct any problem like that, but it had not.
After a great deal of trial and error, the solution was to go to move disk/library/printers to the desktop and restart the system
Then use the the install disk 1 that came with the iMac and use the OPTIONAL INSTALLS package to reinstall the printer drivers.
Worked like a champ.
Suspect similar problem might happen for any of you with I/O drivers.

Printing problems with hp laserjet 1018

- printing problem with my hp laserjet 1018 (no *.pdf files!), all other documents were printed
- hp photosmart premium c309 works with all file types
Windows 7 64 bit
Adobe Acrobat Pro 10.1.7
Acrobat Reader 11.0.3

Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

Wireless printing problems with 10.5.4 and Epson printers

Anyone else know about problems with Epson printers such as this no longer functioning wirelessly with bonjour once upgrade to 10.5.4? It appears they are not supporting this with a new driver yet?
At this time, Epson says they have no drivers for 10.5 and this specific printer but wondered if there are more general problems with 10.5.4 and bonjour with Epson or others?
Thanks
Paul
MacBook Pro Mac OS X (10.5.4) Using Epson CX11-NF printer

I have 5 computers-G4 PowerPC, two G4 12" laptops, G5 Mac Pro dual, Macbook Pro--with the older computers all running 10.4.11, the new ones 10.5.4. Until Friday, I was able to print with all of them to an Epson Stylus Photo R200 via Airport Extreme. After installing software for my new G3 iPhone on the G5 Mac Pro the printer connections on all the computers stopped working. I have so far been able to get the G4 Power PC to print, but none of the others. I have tried Bonjour, Gimp-print v.5.0.0-beta 2, cleared all the print drivers and restarted, and everything else I have been able to find on both Epson and Apple sites. The Printer Set Utility described by Epson does not exist in Leopard machines, and doesn't work for the older laptops. As soon as I select one of the printers in the "selected printer in print dialogue box" it grays out. I have set up sharing on the G4Power PC that does print, but it is not accessible--it shows up but is grayed out. There is a diamond next to the printers in the Print dialogue box in applications' menus, but it still doesn't work. It either cannot make the connection, cannot find the printer, or keeps spinning with the message that it is finishing printing (but it hasn't even started.) Again, everything worked fine until the new iPhone was added to the mix. My old iPhone didn't cause any problems. This is really a problem. Any suggestions welcome.

Printing interrupted (with HP LaserJet 1022)

Hello,
I've recently upgraded to Snow Leopard. Since doing so, my printer (a HP LaserJet 1022, bought with my Mac from Apple) has been working only intermittently.
If I print a document, from any application, of more than one page, it'll only print the odd pages and will stop some way through printing those odd pages and the lights on the top of the printer will start flashing red. (I have checked the settings and they're set to print all pages, not just the odd ones.) The only way to move on is to switch the printer off and on again.
This means that 1) I can only print one page at a time and 2) that every few pages or so, I have to switch the printer off and back on.
Does anyone know what's going wrong or what I can do to fix the problem? I thought the SL installer updated my printer driver.
Thanks, in advance, for your help.
Jonathan.

HP has simply abandoned the 1022 printer on Snow Leopard. For a time there was a HP software engineer posting here, gathering information from users, advising us that they were working on the 1022 driver. He even sent a beta driver to several people with specific problems. Then he suddenly disappeared and we haven't seen or heard from him since. My 1022 works fine with the Snow Leopard supplied driver, except for the manual duplex option which no longer exists. Others report that their 1022 only prints every other page or stops after a couple of pages. There is a very long thread here about the 1022 problems. The HP guy's name was Andrew but, as I said, he vanished. 1022 owners were starting to get testy and frustrated so maybe he just got tired of trying to help.
As for me, I will never buy an HP printer again because of this abandonment.
See this link for the original 1022 thread...
http://discussions.apple.com/thread.jspa?threadID=2176654&tstart=0
Message was edited by: lkrupp

Printing problems with hp laserjet cp1515n [found problem]

Dear Arch users,
A couple of weeks ago I installed for the first time an Arch linux on my brand new Dell laptop with an UEFI MB. It took a while until I could understand how UEFI works but eventually I sort it out and got Arch installed. Unfortunatelly there are some small problems to be straiten out. One of them is the fact that printing with my laser printer (see subject line) is not working.
for the last couple of days I was searching through all post I could find around on the internet, mainly here at the Arch forum. Unfortunatelly I could not find anything nearly describing what I am living on my system. Well here is a brief description of what is happening. After installing Arch, I opted for KDE desktop environment and I made the full instalation. After installing additional software (gimp, inkskape, etc.) I needed to install my printer. At first I couldn't get permission. Than reading the Arch tutorial for CUPS, I saw that the 'lp' permission was not setup properly. Well Have done as described there. Then I tryed to install using the GUI from KDE for installing an usb printer and for my surprise there was not such an option. I intalled than de hp-toolbox, and than it was easy to install the printer. It was automatically recognized and everything was there. The problem was, when I open an archive (text, web page, doesn't matter) and send it to print, the spooler went well theoretically sent to printer and then popped up a notification saying printing finished. Opening the printing cue, I can see that the archive was still there and marked as pending. That was the point where I started to search around for potential solutions or similar solutions.
After sudying a lot I came to a conclusions that it probably have something to do with permissions. Unfortunately I could not find out where or which permissions to change in order to get something printed. I found some "debugging" and information commands and I am posting the results here;
# systemctl status cups
cups.service - CUPS Printing Service
Loaded: loaded (/usr/lib/systemd/system/cups.service; enabled)
Active: active (running) since Tue 2013-01-29 13:26:21 BRST; 4h 43min ago
Main PID: 525 (cupsd)
CGroup: name=systemd:/system/cups.service
└─525 /usr/sbin/cupsd -f
Jan 29 17:39:46 XXXX-archs hp[12186]: io/hpmud/musb.c 588: invalid usb_open: Permission denied
Jan 29 17:40:14 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:43:27 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:44:19 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:44:26 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:44:51 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:45:05 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:56:35 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:56:36 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:56:36 XXXX-archs systemd[1]: Started CUPS Printing Service.
# systemctl status cups.socket
cups.socket - CUPS Printing Service Sockets
Loaded: loaded (/usr/lib/systemd/system/cups.socket; enabled)
Active: active (running) since Tue 2013-01-29 13:26:10 BRST; 4h 45min ago# /usr/lib/cups/backend/usb
DEBUG: list_devices
DEBUG: libusb_get_device_list=10
DEBUG2: Printer found with device ID: MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8; Device URI: usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y
direct usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y "HP Color LaserJet CP1515n" "HP Color LaserJet CP1515n" "MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8;" ""
Jan 29 13:26:10 XXXX-archs systemd[1]: Starting CUPS Printing Service Sockets.
Jan 29 13:26:10 XXXX-archs systemd[1]: Listening on CUPS Printing Service Sockets.
# lsusb
Bus 001 Device 003: ID 03f0:4417 Hewlett-Packard EWS UPD
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 003 Device 004: ID 0c45:648d Microdia
Bus 004 Device 004: ID 0cf3:e004 Atheros Communications, Inc.
# /usr/lib/cups/backend/usb
DEBUG: list_devices
DEBUG: libusb_get_device_list=10
DEBUG2: Printer found with device ID: MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8; Device URI: usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y
direct usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y "HP Color LaserJet CP1515n" "HP Color LaserJet CP1515n" "MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8;" ""
# lpinfo -v
network ipps
network smb
direct hp
network socket
network http
network ipp
file cups-pdf:/
network lpd
network beh
network https
direct ptal
direct hpfax
# usb-devices
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=03f0 ProdID=4417 Rev=01.00
S: Manufacturer=Hewlett-Packard
S: Product=HP Color LaserJet CP1515n
S: SerialNumber=00BRAS85501Y
C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
The out put from the last command (usb-devices) I only copyed the relevant part from the printer in question.
the couple of last lines of CUPS error.log are;
E [29/Jan/2013:17:44:48 -0200] [Job 14] Stopping unresponsive job.
E [29/Jan/2013:17:52:25 -0200] [Client 14] Request for subdirectory "/admin/log/error_log?".
E [29/Jan/2013:17:52:41 -0200] [Client 14] Request for subdirectory "/admin/log/error_log?".
E [29/Jan/2013:18:05:47 -0200] [cups-deviced] PID 14408 (dnssd) stopped with status 1!
E [29/Jan/2013:18:16:37 -0200] [cups-deviced] PID 15151 (dnssd) stopped with status 1!
I hope somebody could help me out to find where to change permission (if necessary) or point me out to an different road.
Thanks
Last edited by camarao (2013-02-08 02:36:36)

OK here am I again.
as mentioned before I created an bogus printer with:
lpadmin -p test -v file:/dev/null
verified the presence of the printer;
lpstat -p
$ lpstat -p
printer Color_LaserJet_cp1515n disabled since Fri 01 Feb 2013 02:55:59 PM BRST -
reason unknown
printer hp930c is idle. enabled since Thu 31 Jan 2013 11:30:21 PM BRST
printer test is idle. enabled since Fri 01 Feb 2013 02:54:57 PM BRST
At first "test" printer was disabled for an uknown reason.
tried to use lpadmin -p test to enable the printer as described on the previusly mentioned web site, but couldn't get to enable printer "test". After reading alittle more on the internet I found the command cupsenable <printer> and indeed it changed the printer status.
tried to print;
echo test | lp -d test
result:
$ echo test | lp -d test
lp: Destination "test" is not accepting jobs.
I tried to change the condition of the Color laser printer but did not made any difference with the cups command.
Conclusion: how can I modify this status to make the printer accept jobs?

Printing problem with HP LaserJet Printer since Mavericks Installed

Hello,
I'm working on iMac and I have recently installed OSX Mavericks.
I have now printing troubles with my printer HP LaserJet P1102w.
Sometimes it prints, sometimes it doesn't.
When it doesn't print I often need to suppress the file in the printer task and then print again. And there it works.
I have tried to solve the problem by installing all the HP drivers, and also made a Reset printing system, but it does'nt change anything.
Any Idea ?
Thank you for any help.
François

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.

Printing problems with HP Laserjet P2015DN

We are using SAP Business One software and are trying to print Delivery Slips using HP Laserjet P2015DN. The problem we have is when we use this printer it prints boxes around the entry fields. I have tried several drivers but no luck. Any help would be greatly appreciated. I am using a print server with 2003 opreating system
Thanks Jim Dyer

JIm,
When you say it prints boxes around the entry fields, do you mean for all reports? If only selected reports have the boxes, check the border for entry fields
Thanks,
Gordon

Problem with HP LaserJet 4L and Leopard

4L will not print with Leopard except under following circumstances:
If I unplug the 4L, then replug and reset via Print & Fax preference,
then, it will print 1 page and stop. Will not print any more until I go through the unplug,replug,reset procedure. Then, I get 1 more page. Etc,etc. The unprinted pages appear in the printer queue. I have used this 4L happily going back through many Mac's to the old Duo. Any ideas?

I am having a problem with my HP Laserjet 6L. I use PowerPrint's Serial to USB cable. The computer recognizes the driver, but prints garbage. Does anyone know how to fix this?
With Tiger I used to have the problem where after each print job I would have to unplug the USB cable and plug it into the other USB port. This might be a work around for the other respondants.

Printing problem with HP Laserjet 2600n

I recently bought a HP LaserJet 2600n and connected it to my router. It worked! I could print from it using my laptop. That was yesterday. Now for some reason it doesn't work. CUPS just says completed as soon as I send it. It can connect, because there are no error messages. Can someone help me fix this? I'm using the foo2zjs drivers from the AUR. I even made it print colour! I am really confused why this isn't working...
EDIT: Seems it works with Abiword...?? Yesterday it worked with my KDE4 apps and not Abiword. I'm confused!
Last edited by miggols99 (2008-03-02 19:57:34)

The page looks perfect in preview and as a PDF. I can't print from the PDF, however, because it shrinks the text and expands the margins ...
Something's fishy. Save as PDF should result a file that looks exactly, precisely, like what you'd get if you printed directly to your printer.
I suspect your Word document has been corrupted by a few bytes of random data that is causing your printer to go nuts. Try cutting that portion out of the document, and pasting it in a new blank document so you can incrementally isolate the damage.
This isn't going to be as easy as it sounds, because when the PostScript printer driver encounters the errant code in the Word document, it's essentially telling the printer "now, go to the top of this page, print a nasty black smudge, and then crash." You might have to cut a whole page before and after the suspected corruption. If you're lucky you might be able to cut the portion then paste it right back as "unformatted text". Try that.
BDAqua wrote:
I'm not familiar with Word,
We should all be so fortunate. Word does use the standard OS X Print dialog though.

Printing problem with HP Laserjet 2550

I have an HP Laserjet 2550 which is having problems with my Macbook Pro with 10.6.3
Snow Leopard has the drivers for the HP 2550. So when I added the printer it picked up the drivers.
The problem I am having is that it send the job to the printer but the printer does not print it. When I restart the printer on startup it prints the job. I have to do this every time.
Is the problem with the Mac or the printer?

Have you run Software Update to check that you have the latest HP drivers? They have done a couple of revisions since SL was released. Of course, if you are still running 10.6.3 SU will come up with many other updates some of which might be relevant to the problem.
You might also do some maintenance - repair permissions, etc. This could make a difference. There are lots of other steps that might be taken but try these first.
Neville

Printing problems with HP Laserjet P1005

everything seems to be ok with my printer HP Lasejet P1005, but it just doesn't print. The works are in the gueue and error messages continually is "set the new toner cartridge" althrough I've changed the cartridge already. Also there is a message "HP:s part number"
What can or should I do??? Help!!!

Hi @rlp48,
I see by your post that you are getting the error message "set the new toner cartridge" and you have already changed it with a HP toner. I would like to help.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
Open and close the lid 5 times quickly. It should print out a page with lines on it.
Did it print the self test?
If the self test page printed, clear the Spool folder and restart the Print Spooler and try printing again.
How to Clear Current Print Queue In Windows Vista & Windows 7.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
Are you using Genuine HP Toner?
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Printing problem-new HP Laserjet P2015 and VERY slow printing-

I have a new HP Laserjet p2015, and while it does print, it is VERY slow—typically about 1 page per minute even for plain black-and-white Word documents. Much time spent with HP support, even got a new new machine… they're out of ideas and think it might be OS related…
Where do I begin to troubleshoot this?
Printer is connected directly to computer via USB.

I have downloaded new drivers, removed and added the printer multiple times, etc. As I mentioned, I've spent a few hours with HP support, tried new USB cable, even got a new machine. They now believe it's something with my system.
Any reason to believe that reinstalling my system software will help?
By the way: Printing from Text Edit is not faster. Or if it is, not very. In any case, it's not a realistic solution

Printing Problem with CS 6 extended and Canon Pro 9500

My prints are no longer coming out centered. I have the "center" box checked in the CS6 print dialogue box. The prints are not centered left to right or top to bottom.
This seems to be a problem since I upgraded to CS 6 extended and or newest print driver for my Canon Pro 9500.
I believe that since I did one or both of these changes there is a border (consitst of slanted hash marks around the perimiter of the print dialogue picture) in the preview of the print.
The border segments left and right are not equal and are very uneven in width. The top and bottom borders are closer but still not even in width.
Can anyone help me with this issue?
Thanks,
Dennis

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
You will be able to continue your current conversation with PECourtejoie without inturruption.

Printing problem with Epson R290 Illustrator and inDesign

I am running CS2 on Leopard and have recently purchased an Epson R290. The first time I used it with Illustrator and InDesign it worked fine but now whenever I print anything it prints a tiny version (about a sixth of the real size) of the design in the top left corner of the page. It does this both with new documents and old ones that used to print ok.

Since I posted the message about this problem I have discovered that it can be worked around by choosing a higher quality print. ie if you choose plain paper when printing from Illustrator or InDesign the printer prints a reduced size image but if you choose Ink jet mat or glossy the print comes out fine. I don't have this problem with Photoshop but that may be that I always print high quality from that application. I don't use Appleworks Draw so don't know whether this solves the problem for that application but iWork documents print ok.

Printing Problem with HP LaserJet 1022 and OS 10.4

Similar Messages

Maybe you are looking for