Printing problem with HP LaserJet Printer since Mavericks Installed

Hello,
I'm working on iMac and I have recently installed OSX Mavericks.
I have now printing troubles with my printer HP LaserJet P1102w.
Sometimes it prints, sometimes it doesn't.
When it doesn't print I often need to suppress the file in the printer task and then print again. And there it works.
I have tried to solve the problem by installing all the HP drivers, and also made a Reset printing system, but it does'nt change anything.
Any Idea ?
Thank you for any help.
François

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.

Similar Messages

Print problem with HP LaserJet P1006 since 17/10/2011

We received our client reporting that they use the HP LaserJet P1006 to print a PDF with portugese. The preview is fine. However, the output of the portugese words are changed to font named "Wingdings". I viewed the property of the PDF file - fonts tab. All fonts are embeded. This error occured on this Monday. Why...? Thanks a lot.

Show as tagging. Reader 9, windows xp.
Sincerely yours,
Sam Fong sent from my iPhone

Printing problems with hp laserjet 1018

- printing problem with my hp laserjet 1018 (no *.pdf files!), all other documents were printed
- hp photosmart premium c309 works with all file types
Windows 7 64 bit
Adobe Acrobat Pro 10.1.7
Acrobat Reader 11.0.3

Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

Printing problems with hp laserjet cp1515n [found problem]

Dear Arch users,
A couple of weeks ago I installed for the first time an Arch linux on my brand new Dell laptop with an UEFI MB. It took a while until I could understand how UEFI works but eventually I sort it out and got Arch installed. Unfortunatelly there are some small problems to be straiten out. One of them is the fact that printing with my laser printer (see subject line) is not working.
for the last couple of days I was searching through all post I could find around on the internet, mainly here at the Arch forum. Unfortunatelly I could not find anything nearly describing what I am living on my system. Well here is a brief description of what is happening. After installing Arch, I opted for KDE desktop environment and I made the full instalation. After installing additional software (gimp, inkskape, etc.) I needed to install my printer. At first I couldn't get permission. Than reading the Arch tutorial for CUPS, I saw that the 'lp' permission was not setup properly. Well Have done as described there. Then I tryed to install using the GUI from KDE for installing an usb printer and for my surprise there was not such an option. I intalled than de hp-toolbox, and than it was easy to install the printer. It was automatically recognized and everything was there. The problem was, when I open an archive (text, web page, doesn't matter) and send it to print, the spooler went well theoretically sent to printer and then popped up a notification saying printing finished. Opening the printing cue, I can see that the archive was still there and marked as pending. That was the point where I started to search around for potential solutions or similar solutions.
After sudying a lot I came to a conclusions that it probably have something to do with permissions. Unfortunately I could not find out where or which permissions to change in order to get something printed. I found some "debugging" and information commands and I am posting the results here;
# systemctl status cups
cups.service - CUPS Printing Service
Loaded: loaded (/usr/lib/systemd/system/cups.service; enabled)
Active: active (running) since Tue 2013-01-29 13:26:21 BRST; 4h 43min ago
Main PID: 525 (cupsd)
CGroup: name=systemd:/system/cups.service
└─525 /usr/sbin/cupsd -f
Jan 29 17:39:46 XXXX-archs hp[12186]: io/hpmud/musb.c 588: invalid usb_open: Permission denied
Jan 29 17:40:14 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:43:27 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:44:19 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:44:26 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:44:51 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:45:05 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:56:35 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:56:36 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:56:36 XXXX-archs systemd[1]: Started CUPS Printing Service.
# systemctl status cups.socket
cups.socket - CUPS Printing Service Sockets
Loaded: loaded (/usr/lib/systemd/system/cups.socket; enabled)
Active: active (running) since Tue 2013-01-29 13:26:10 BRST; 4h 45min ago# /usr/lib/cups/backend/usb
DEBUG: list_devices
DEBUG: libusb_get_device_list=10
DEBUG2: Printer found with device ID: MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8; Device URI: usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y
direct usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y "HP Color LaserJet CP1515n" "HP Color LaserJet CP1515n" "MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8;" ""
Jan 29 13:26:10 XXXX-archs systemd[1]: Starting CUPS Printing Service Sockets.
Jan 29 13:26:10 XXXX-archs systemd[1]: Listening on CUPS Printing Service Sockets.
# lsusb
Bus 001 Device 003: ID 03f0:4417 Hewlett-Packard EWS UPD
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 003 Device 004: ID 0c45:648d Microdia
Bus 004 Device 004: ID 0cf3:e004 Atheros Communications, Inc.
# /usr/lib/cups/backend/usb
DEBUG: list_devices
DEBUG: libusb_get_device_list=10
DEBUG2: Printer found with device ID: MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8; Device URI: usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y
direct usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y "HP Color LaserJet CP1515n" "HP Color LaserJet CP1515n" "MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8;" ""
# lpinfo -v
network ipps
network smb
direct hp
network socket
network http
network ipp
file cups-pdf:/
network lpd
network beh
network https
direct ptal
direct hpfax
# usb-devices
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=03f0 ProdID=4417 Rev=01.00
S: Manufacturer=Hewlett-Packard
S: Product=HP Color LaserJet CP1515n
S: SerialNumber=00BRAS85501Y
C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
The out put from the last command (usb-devices) I only copyed the relevant part from the printer in question.
the couple of last lines of CUPS error.log are;
E [29/Jan/2013:17:44:48 -0200] [Job 14] Stopping unresponsive job.
E [29/Jan/2013:17:52:25 -0200] [Client 14] Request for subdirectory "/admin/log/error_log?".
E [29/Jan/2013:17:52:41 -0200] [Client 14] Request for subdirectory "/admin/log/error_log?".
E [29/Jan/2013:18:05:47 -0200] [cups-deviced] PID 14408 (dnssd) stopped with status 1!
E [29/Jan/2013:18:16:37 -0200] [cups-deviced] PID 15151 (dnssd) stopped with status 1!
I hope somebody could help me out to find where to change permission (if necessary) or point me out to an different road.
Thanks
Last edited by camarao (2013-02-08 02:36:36)

OK here am I again.
as mentioned before I created an bogus printer with:
lpadmin -p test -v file:/dev/null
verified the presence of the printer;
lpstat -p
$ lpstat -p
printer Color_LaserJet_cp1515n disabled since Fri 01 Feb 2013 02:55:59 PM BRST -
reason unknown
printer hp930c is idle. enabled since Thu 31 Jan 2013 11:30:21 PM BRST
printer test is idle. enabled since Fri 01 Feb 2013 02:54:57 PM BRST
At first "test" printer was disabled for an uknown reason.
tried to use lpadmin -p test to enable the printer as described on the previusly mentioned web site, but couldn't get to enable printer "test". After reading alittle more on the internet I found the command cupsenable <printer> and indeed it changed the printer status.
tried to print;
echo test | lp -d test
result:
$ echo test | lp -d test
lp: Destination "test" is not accepting jobs.
I tried to change the condition of the Color laser printer but did not made any difference with the cups command.
Conclusion: how can I modify this status to make the printer accept jobs?

Printing problem with HP Laserjet 2550

I have an HP Laserjet 2550 which is having problems with my Macbook Pro with 10.6.3
Snow Leopard has the drivers for the HP 2550. So when I added the printer it picked up the drivers.
The problem I am having is that it send the job to the printer but the printer does not print it. When I restart the printer on startup it prints the job. I have to do this every time.
Is the problem with the Mac or the printer?

Have you run Software Update to check that you have the latest HP drivers? They have done a couple of revisions since SL was released. Of course, if you are still running 10.6.3 SU will come up with many other updates some of which might be relevant to the problem.
You might also do some maintenance - repair permissions, etc. This could make a difference. There are lots of other steps that might be taken but try these first.
Neville

Printing Problem with HP LaserJet 1022 and OS 10.4

I am having a problem printing one page of a document on my HP LaserJet 1022 with OS 10.4. All other documents seem to be printing fine, but when I try to print one particular page of a 90 page WORD doc, that page consistently comes out with a big black streak across it and it does something to the printer because all the lights start flashing.
I have powered off, unplugged, reset the printer subsystem, reinstalled the printer driver, and even tried to print on my laptop, and the same thing keeps happening. The document printed for me fine a few weeks ago.
Any suggestions on a work-around for this or a permanent solution? I really need to print this page on my printer ASAP. Thank you.

The page looks perfect in preview and as a PDF. I can't print from the PDF, however, because it shrinks the text and expands the margins ...
Something's fishy. Save as PDF should result a file that looks exactly, precisely, like what you'd get if you printed directly to your printer.
I suspect your Word document has been corrupted by a few bytes of random data that is causing your printer to go nuts. Try cutting that portion out of the document, and pasting it in a new blank document so you can incrementally isolate the damage.
This isn't going to be as easy as it sounds, because when the PostScript printer driver encounters the errant code in the Word document, it's essentially telling the printer "now, go to the top of this page, print a nasty black smudge, and then crash." You might have to cut a whole page before and after the suspected corruption. If you're lucky you might be able to cut the portion then paste it right back as "unformatted text". Try that.
BDAqua wrote:
I'm not familiar with Word,
We should all be so fortunate. Word does use the standard OS X Print dialog though.

Printing problems with HP Laserjet P2015DN

We are using SAP Business One software and are trying to print Delivery Slips using HP Laserjet P2015DN. The problem we have is when we use this printer it prints boxes around the entry fields. I have tried several drivers but no luck. Any help would be greatly appreciated. I am using a print server with 2003 opreating system
Thanks Jim Dyer

JIm,
When you say it prints boxes around the entry fields, do you mean for all reports? If only selected reports have the boxes, check the border for entry fields
Thanks,
Gordon

Printing problem with HP LASERJET P1007

SINCE I UPGRADED TO MAS OS X SNOW LEOPARD I AM NOT ABLE TO PRINT TO MY HP LASERJET P1007 CONNECTED TO AIRPORT EXPRESS. KINDLY HELP

HP LaserJet 1020 Wi-Fi SOLUTION (after 10.6.3 update)
Our 1020 stopped printing via Airport . . .
SOLUTION:
* Take usb printer cable from Airport base, and plug into Mac
* "Add Printer" in System Preferences
* Choose "HP Laserjet xxx.224" driver (tip: type digits of your printer model ## in search bar to find more quickly)
* Test print via the USB
* Return usb cable to the Airport base
This worked for us; your mileage may vary . . .

Leopard printing problems with HP Laserjet 5000

Hi to anyone who might be able to help.
I've just installed Leopard, and now my HP 5000 Laserjet (hooked up via ethernet) will not print. When I print, the computer says it is printing, but the printer never prints anything, and even though the printer shows up in the print window, the computer never actually finds the printer. I have downloaded the latest driver from the HP web site, which hasn't helped at all....
Any help would be greatly appreciated.
Thanks
Angus

Hi Gus1,
Since it's hooked up via Ethernet, I assume then it's a 5000N? We have one of those and it works just fine in Leopard. So there must be something wrong in your setup. Two things you can try.
1) It's an old, kind of slow protocol, but it works. Turn on AppleTalk. It's in the System Preferences under the Network tab. Choose "Ethernet" in the left pane. Click the "Advanced" button. Click on the AppleTalk tab and turn on the check box for "Make AppleTalk Active". Choose "Print & Fax" in the System Preferences and remove any entries for the 5000. Click the Add button and then the Default button. The 5000 should show up and show AppleTalk as its connection. Choose it and click Add.
2) On the printer. Press the Menu button to the right once so the display reads, "Information Menu". Press the Item button twice to the right so the display reads, "Print Configuration". Press the Select button. The printer will kick out two sheets. On the first page under the "Printer Information" heading is the IP address for your printer. It's the second entry from the bottom labeled, "HP JetSend Address: ip: 192.168.5.6 (your actual address will of course be different).
In the "Print & Fax" heading of the System Preferences, remove any entries for the 5000. Click the Add button and then the IP button. Under the Protocol pull down menu, choose "HP Jet Direct - Socket". Under "Address:", enter the IP address on your printout, like my example of 192.168.5.6. Under "Name:", put in something meaningful, like "HP LaserJet 5000N". Assuming you have the PPD installed, then under "Print Using:' choose "HP LaserJet 5000 Series". Click the Add button.

Printing problems with HP Laserjet P1005

everything seems to be ok with my printer HP Lasejet P1005, but it just doesn't print. The works are in the gueue and error messages continually is "set the new toner cartridge" althrough I've changed the cartridge already. Also there is a message "HP:s part number"
What can or should I do??? Help!!!

Hi @rlp48,
I see by your post that you are getting the error message "set the new toner cartridge" and you have already changed it with a HP toner. I would like to help.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
Open and close the lid 5 times quickly. It should print out a page with lines on it.
Did it print the self test?
If the self test page printed, clear the Spool folder and restart the Print Spooler and try printing again.
How to Clear Current Print Queue In Windows Vista & Windows 7.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
Are you using Genuine HP Toner?
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Printing problems with HP LaserJet 6MP

Does anyone know if there is a way for my old HP Laserjet 6MP printer to work with my new IMac? It has a 8 pin serial connector and HP no longer offers support for this older printer. They have suggested I buy a HP JetDirect 500x J3265A but those are over $300. Surely there must be a less expensive solution. HP also suggested checking out Strydent Software but I couldn't find anything that seemed applicable.
I have a Keyspan USB to serial adapter and everything is hooked up. I found my printer on the IMac list but when I try to print it says "Unable to connect to IPP host: Unknown error 0" So I must be doing something wrong......

Asante used to make a Mac serial to Ethernet device,
AsanteTalk. If they're still available that may be
an alternative. They used to sell for $99.00. I
used one with an HP-4MP printer (which my daughter
and son-in-law are still using.)
I think you may try what you are doing but do not use
IPP printing because you have the printer connected
to a USB port not an Ethernet port.
Thanks for the info.
Another question.... if I hook the printer up through the Ethernet port can I still run DSL through it?
Also the printer browser forces me to choose either IPP, LPD or HP Jet Direct-Socket.

Printing problem with hp laserjet 1536dnf MFP

Printer HP1536dnf
Operating system    Windows 7 (32 bit)
Printer has been set up and installed correctly. Problem is when printing the lcd is showing "printing document" but nothing happens for a while and I get a PCL XL Error
Subsystem: TEXT
Error:               InternalError 0x50
File Name:     cheettext.c
LIne Number: 710
I have checked all options after going through the hp site including hp diagnostic utility which shows no errors. I have re-installed the printer drivers and have checked if it is offline or paused.

I would make sure you have lastest fw (i know you probably see this alot) there was an update for this product that addressed some pcl erors such as the cheettext people were reporting seeing. you can do this by going: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3974279&lc=en&cc=us&dlc=en&lang=en&cc=us and selecting the OS you are using and getting lastest FW.
Also if you do see it a powercycle does help reduce the frequency that you see it ( i know it is not the best solution ) but at least it should help you get what you need printed printed, sometimes it helps to elminate it for some people.
I am an HP Employee.

Printing problems with a shared printer on home network

Hi
I just upgraded all my Macs to Tiger. We have been running Panther very smoothly since it came out. We have a small home network running on a standard hub. The USB printer is attached to one of my G4s, and the rest of the network uses this as a printer connection.
I've been successfully printing to our HP 920C printer from all my programs for years now. Now that I've gone to Tiger, my printer Utility sees and registers the printer, but when I try to print to it from any of the Apple text programs, there is no response. I print from Illustrator with no trouble at all. TextEdit for example, sees the printer, but when I click the "PRINT" button from the print dialogue nothing happens. I am wondering why this is.
To note: I have added a line of code to the Terminal, which unblocks the system for Adobe Distiller to create PDFs (sudo killall -HUP cupsd). This was reccomended by Adobe with Panther in order to bypass a PDF function whithin Panther. I wonder if it was a mistake to add it to Tiger, and that it is this that is blocking TextEdit. If this is the case how do I remove the command, and reset the system to its default PDF setting.

It was a simple problem after all. Sadly my hard disc was about to snuff it. I changed disk, reinsalled Tiger and all is as smooth as ever.

Printing Problem with Epson R320 (Print CD)

Problem: I cannot print using Print CD with a new Epson Stylus Photo R320, however I can print from applications using the gimp beta driver provided in OS software, via <Print Using> dialogue box.
Power Mac G4 dual 450, running 10.4.6.
After phoning Epson, I downloaded the needed driver from Epson and went through the installation process with an Epson tech. However I cannot seem to access this driver in the print utility. The Printer Setup Utility is forcing me to choose a “gimp” driver. Some discussions on this site suggest choosing just Epson usb—the question is how with the way the dialogue boxes are configured in Printer Setup Utility. The problem seems to be I am unable to access the driver through the <Print Using> menu in the utility. If I select more printers, (after highlighting the R320) this causes the print utility to crash.
I have repaired permissions, reset the printer setup, uninstalled, reinstalled; actually I have done everything I could find to do. The problem seems so simple. I easily created my CD label; now I would just like to print it!! Any ideas from all the pros on this list. Thank you.
Mary Ann
Desktop: G4 450 dual and Powerbook G4 15 Mac OS X (10.4.6) Epson Stylus Photo R320

I have an Epson R320 and have communication problems.You start the job and after about 5 seconds you get a ! in the dock on the printer icon and on opening you see "job stopped".
I am no expert but it seems to me that the program e.g.MYOB accounting fails to pass the data to OSX.
If I de install and reinstall the epson drivers and repair permission it will work ...but then the next day on re-booting we are back to the same state of not working.
I have informed Epson and am waiting for a reply. The epson printer tests and standalone mode works. OSX problem?

Printing Problems with Epson R200 Printer

When I try to print from Aperture my prints come out "flat" and the colors are off. When I export the the same file to PS Elements 4.0 my prints come out great. I would prefer to not have to do this. Here is some background information on what I have tried to do so far to correct this problem:
1. I have searched this forum backwards and forwards to try and find an answer - no luck!
2. Purchased a Spyder2 monitor calibrator
3. Wasted a lot of paper trying various settings.
4. Yes - I have read the two articles on the Aperture site regarding printing and calibration. I have followed both of these articles and still get poor prints when printing from Aperture.
5. I have met with the genius at my local Apple Store to work through the problem. He informed me that he only prints from Photoshop and did not really know how to solve my problem.
6. Purchased the Aperture 1.5 book from Apple to see if I could find out anything else that I had not already tried.
Help please, what am I missing? It seems to me that all of the books written on Aperture stress printing books and not photo prints as their main area on printing. Can I get the same results printing from Aperture as I can printing from Photoshop Elements?
Any suggestions would be greatly appreciated.
Randy
iMac 20" Intel Core Duo Mac OS X (10.4.9)
iMac 20" Intel Core Duo Mac OS X (10.4.9)

When I try to print from Aperture my prints come out
"flat" and the colors are off. When I export the the
same file to PS Elements 4.0 my prints come out
great. I would prefer to not have to do this. Here is
some background information on what I have tried to
do so far to correct this problem:
1. I have searched this forum backwards and forwards
to try and find an answer - no luck!
2. Purchased a Spyder2 monitor calibrator
3. Wasted a lot of paper trying various settings.
4. Yes - I have read the two articles on the Aperture
site regarding printing and calibration. I have
followed both of these articles and still get poor
prints when printing from Aperture.
5. I have met with the genius at my local Apple Store
to work through the problem. He informed me that he
only prints from Photoshop and did not really know
how to solve my problem.
6. Purchased the Aperture 1.5 book from Apple to see
if I could find out anything else that I had not
already tried.
Help please, what am I missing? It seems to me that
all of the books written on Aperture stress printing
books and not photo prints as their main area on
printing. Can I get the same results printing from
Aperture as I can printing from Photoshop Elements?
Any suggestions would be greatly appreciated.
Randy
iMac 20" Intel Core Duo
Mac OS X (10.4.9)
iMac 20" Intel Core Duo Mac OS
X (10.4.9)
I'll attempt to answer my own question. After much trial and error along with a lot of wasted paper and ink I have found the source of the problem. Aperture works exactly like it should if you follow Apple's recomendations for printing. My problem was that the profiles supplied for my printer by Epson are horrible! I purchased a Spyder 2 Suite screen calibrator to try and fix this problem and did not have any luck until I ran the included Print FX software and created a new profile for my printer (Epson R200). The prints are now coming out great and virutally indistinguishable from those printed via Photoshop Elements. The clue to fixing this is that when I turned on "on-screen" proofing and selected my old printer profile the output did match the screen. Unfortuntely the screen images were not using the full gamut of color (hence the flat pictures) because it was gettting it's information from the Epson ICC Profile. In summary, if you are suffering from this problem find a way to create your own profile for your printer. There are expensive methods which involve purchasing a spectrophotometer. I took the middle of the road route and created a profile using a software only profiler (Print FX). I'm sure that depending on your printer you could download a better profile on the web. Either way you get it done you'll be happier. NOTE: I guess some printers come with better profiles than others which would explain why some people don't have any problems.
iMac 20" Intel Core Duo - 2GB RAM Mac OS X (10.4.9)

Printing problem with HP LaserJet Printer since Mavericks Installed

Similar Messages

Maybe you are looking for