Printing problem with iPhoto 9.5.1 under Mavericks 10.9.3

When trying to print even a single photo from iPhoto, the printer hangs after competing about 10% of the job.
The printer is an HP Deskjet F4580. It still works fine from other apps.

The printer.
iPhoto is still active and I can do other things with it. The job has been sent tothe printer so I guess it's the printer where the problme lies, or the communication between the Mac and the printer (which is wireless, though that shouldn't make a difference).

Similar Messages

Printing problems with iPhoto

I have been trying to print 5x7 pictures (or other various sizes) from my iPhoto library, but the printer is printing the actual iPhoto page (i.e., the menu column on the left which includes the listing of events, albums, etc. is actually printing along with any photo thumbnails that can fit on the page) Does anyone know if this is a printer problem or and iPhoto problem?

Greetings,
If you see the actual iPhoto window with the sidebar and everything when you print, that would quality as "super weird" in my book. I'm assuming when you go to File > Print you see "iPhoto" in the upper left hand corner right next to the Apple yes?
Lets try the basics:
Ensure all your software is up to date (Apple Menu > Software Update).
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches (I remove the whole folder. It will be re-generated upon restart.)
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
Once that is complete follow these steps to print your photos: http://docs.info.apple.com/article.html?path=iPhoto/7.0/en/6363.html
If the issue persists Reset the Printing System and try again: http://docs.info.apple.com/article.html?path=Mac/10.5/en/14001.html
Hope that helps.

Another Printing Problem with iPhoto

iMac, 800 MHz, PowerPC G4
OS X 10.4.11
HP Printer
I purchased the 08 iLife and iPhoto worked really well. I installed the update to 7.1.1 and this was the first I have tried to print since that update. Clicking on the print icon (between Email and Order Prints) does nothing at all. Going to the menu bar and dropping down to Print gives +“No Available Themes. There are no themes located. Until at least one theme has been installed, this feature will be unavailable.”+ The themes do show up in the Library/ApplicationSupport/iPhoto folder.
1. Disk Utility has been run several time and permissions repaired only on the first time.
2. iPhoto (com.apple.iPhoto.plist) file deleted several times with no change.
3. iPhoto rebuilt (started program with Option and Command keys held down) with no change.
4. #1 and #2 repeated with no change.
I tried to reinstall iPhoto from the original disc, but since it was a prior version it would not overwrite the 7.1.1.
Any suggestions?
Thanks,
Hawk

Well it looks like things took a turn for the worse. I deleted everything but my iPhoto library and put in my iLife 08 disc. It found that it needed to install iPhoto (looks good). When the install finished I double clicked on the icon and up comes iPhoto with the message that "photo library needs to be upgraded to work with this version of iPhoto (still looking good). When I click on the upgrade button I get the message, "Your photo library is damaged and cannot be opened. Please restore from a backup" (not looking good). I tried to use the backup, but got the same message. I have since repaired permissions a couple of times (nothing found either time) and done a couple of restarts. As of right now I have a couple of thousand pictures that I can not only not print, but I can't access. Still need some suggestions.
Jerry

Printing problem with iPhoto 9.5 version

I have tried to print a photo today, using the Share function in iPhoto.
It did not work. Epson SW438 printer fired up but proceeded to print the picture but without
the paper feeding through.
This is NOT a printer malfunction. I printed successfully a picture through the Finder/Picture folder route.
Anyone else finding this latest release of iPhoto bugged?

Did you check the Epson website for v10.9 Mavericks compatible drivers to download and install yet ??
Epson Support - Drivers

Print problem with iPhoto and P-10

I downloaded the correct driver for my Olympus P-10 digital printer, and iPhoto recognizes it. The printer prints fine directly from the camera, however, when I try to print an edited photo from iPhoto 5.0.4, the full image does not print. A portion of it does, depending upon what constraints I have set in the edit process. I've tried multiple configurations of restraints to no avail. So far, the closest acceptable print is to set the layout to "N-up" which essentially prints four 4X6 photos to a page, but even that is not as good as it should be. What am I doing wrong in iPhoto?
Thanks in advance.

iPhoto does not support printer

Problems with iPhoto and Aperture after installing Mavericks

I use iphoto 11, version 9.5 (902.7) and Aperture 3.5. both are dodgy since installing Mavericks - freezing, not allowing access while wheel spins, showing "Processing". I've re-installed both aperture and iphoto from the Apps store. No difference. Advice please.

The problem keeps occuring every time I shut down my laptop and reopen it when I am not at home (i.e. no Time capsule connected...)
What could I do to solve this issue...anyone please?

Problems with "Printers & Scanners" preference pane under Mavericks

Since installing OS X Mavericks I can no longer print to our WiFi enabled Epson WF-7515 network printer, and attempting to access the "Printers & Scanners" preference pane in System Preferences either produces a Preferences Error which reads "Could not load Printers & Scanners preference pane", or gives a corrupt version of the preference pane which then in turn leads to a different Preferences Error reading "There was an error in Printers & Scanners preference pane".
* Restarting in Safe Mode gives same results.

Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.systempreferences.plist
Click Go then move the com.apple.systempreferences.plist file to the Trash.
Theb visit the Epson website. Download and install v10.9 Mavericks compatible printers.
Then open System Preferences > Printers & Scanners > Print
Then click + to add the printer.

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Problem with iPhoto 9.3.2: Any assistance or how to re-install?

Hi all,
I've got a problem with iPhoto 9.3.2 whereby upon startup, I get a spinning wheel which goes on forever (I've left the computer alone for 5 hrs and coming back, it's still spinning). Symptoms are it pulls up the Library with Events, Photos, Faces, even Albums. But I don't actually get any photos displayed on the right.
I've tried :-
1) reinstalling Mountain Lion
2) using Disk Utility Repair Permissions
3) Rebuilding thumbnails & library
4) Creating new library
5) starting up under a new user account (therefore not a problem with a config file in my homedir)
6) Starting iPhoto up in Safe Mode
Note during the spinning wheel, I can access the menu as such I can quit, import photos, etc.
It actually works (worked) under the following conditions :-
a) Until 31st July iPhoto 9.3.2 was working fine. I cannot remember what I did/installed/uninstalled/changed/deleted to cause it to have problems
b) I can get access to the very same library with Aperture with no problems at all (i.e. no library issues)
c) Photos will only display if I import a picture. Then all Events will appear. I can get into each event, I can even select the photo I imported and delete it. This is my current workaround to accessing photos in iPhoto. However I cannot switch to any of the albums I created. It will only display Events. Clicking on Photos, Faces, Places, and any of the Recent doesn't do anything.
So finally now is to try to re-install iPhoto 9.3.2. Can any one please let me know how I can do this? I've tried Option-Click on Purchases tab in the App Store but I get a greyed out INSTALLED in iPhoto. Similarly I found a link that provided the iPhoto9.3.2Update.dmg but in attempting to installing that, it tells me it can only be done via the App Store.
Any advice?
Cheers

@putnik, yes I believe the update came from that site.
@mende1, perfect! That was easy! I thought I had to clean out plist files from my home directory, etc. Upon deletion and reinstallation, iPhoto started working again!
Thank you so much!

Problems with iPhoto 11.1.4 after update

iPhoto automatically upgraded to 11.1.4 on February 1st, since when I have not been able to access my iPhoto libraries. I had upgraded to "Mavericks" from 10.6 in November 2013 and then installed the compatible version of Microsoft Office and have been using both Office and iPhoto since then, so I conclude that (a) it is not an old problem and (b) it is not a "cross-contamination" problem.
On starting iPhoto, the message appears that I do not have permission to access the library or that the disk is locked. Since I created the library under my user-id, I find it difficult to believe that I do not have permission, and I have checked (4 or more times) that the disk is not locked.
A further message then told me that I needed to use the 'library updater', which I downloaded and ran. I am still unable to access the library.
I have not "sync'd" my iPad nor my iPhone since then, as I am concerned that this could endanger the photographs downloaded from my MacBook.
Does anyone know of a problem with iPhoto 11.1.4 and older libraries which have been progressively updated (from pre-2009 through "Snow Leopard")?

The problem was not with the location - which had not changed - of the library but with the library itself.
I checked similar queries / issues and found an app "iPhoto Library Manager" which HAS solved the problem and, when I install the non-free version (which I have now purchased), it will help me remove the hundreds of duplicates & multiples which have infiltrated my library since about 2007!
Thank you for your response - it showed that someone cared!
John

What is the problem with IPhoto ´11 when I am uploading a photobook to apple store, there is always an error. Anyone ???

What is the problem with IPhoto ´11 when I am uploading a photobook to apple store, there is always an error. Anyone ???
evrything is right wite my appleID.

First try to create a pdf file of the book as described in this Apple document: iPhoto '11: Preview a book, card, or calendar before you order or print it.
If you are unsuccessful in creating the pdf file then boot into Mac OS X: Starting up in Safe Mode and try again. If that works you can continue and order the book while in Safe Mode.
Be sure to keep the pdf file of the book to compare with the printed copy when it arrives.
OT

Printing problems with hp laserjet 1018

- printing problem with my hp laserjet 1018 (no *.pdf files!), all other documents were printed
- hp photosmart premium c309 works with all file types
Windows 7 64 bit
Adobe Acrobat Pro 10.1.7
Acrobat Reader 11.0.3

Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

Printing problems with InDesign CS3 running on OS 10.6

I recently upgrade my old G4 Mac (OS 10.4) to a new Mac Mini running OS 10.6.6. I am still running CS3 and have encountered only one problem. When I print multiple copies documents from InDesign that contain several layers, each copy is processed separately, so that it can take several minutes just to send the print job to the printer if I'm printing over 20 copies. Then once the print job is processed the printer pauses between every copy, which is tripling the printing time. If I print a simpler document with only one or two layers it processes all the copies at once, as it should. I am printing on an Okidata 6150 color laser printer.
I never had this problem on my old computer. I'm wondering if this is one of the "unsupported" bugs of running CS3 on Snow Leopard. I want to make sure that this is a problem unique to running CS3 with Snow Leopard before I go ahead and upgrade to CS4 or CS5.
computer: Mac Mini core 2 duo 2.4 ghz processors, 4 gb RAM, printer: Okidata 6150 DN color laser printer.

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Printing problem with Summarize Comments?

Printing problem with Summarize Comments in Pro 10.1.6? When I print, I only get the number boxes on one page and the comments on the next page. The numbered boxes don't show up on the actual image itself.

Um I dont know if im doing something daft but I tried this like you said
PrinterJob printJob = PrinterJob.getPrinterJob();
printJob.setPrintable(this);
if(printJob.printDialog()){
try {
          PageFormat pageFormat = printJob.defaultPage();
          if (pageFormat.getOrientation() == PageFormat.PORTRAIT) {
          landscape = 0;} else {
               landscape = 1;}
          System.out.println("THE ORIENTATION IS "+ landscape);
          printJob.print(); }
catch (Exception PrinterExeption) { PrinterExeption.printStackTrace();}
and it doesnt seem to work as I tried it both as landscape and portrait in the print dialog but landscape is always 0.
cheers
pmiggy

Printer problem with AW 6.2.9

I have a recurring printer problem with both hp deskjet 5150 and Epson R220. After much work with techs at both, we have determined that it is an AW problem (v. 6.2.9) Other files print okay. I've searched through recent posts and found similiar questions, but the answers aren't specific to my problem. I gather that it involves trashing certain AW files, such as Appleworks.plist and other Appleworks prefs. It will help it I know the specific files to trash and as much detail about how to find them on the HD. I will be infinitely grateful for any help.
OSR
Mac G4 Mac OS X (10.4.6)
Mac G4 Mac OS X (10.4.6)

Welcome to Apple Discussions
You are correct that deleting the AppleWorks preferences can fix some printing problems. I'm surprised that in finding that information you didn't come across a post with the specific information or a tip to my user tip, AppleWorks has stopped working correctly, that explains which preference files ot delete.
Make sure you have the newest printer driver for each printer. Also, use Disk Utility to repair permissions after any system update or upgrade.

Printing problem with iPhoto 9.5.1 under Mavericks 10.9.3

Similar Messages

Maybe you are looking for