Printing problem with Mac OS 10.5.6 and HP Photosmart C8180

I'm new to Macs and have just bought an iMac and an HP photosmart C8180 printer. The problem I'm having is trying to get the wireless printing option working on the Mac. I've tested that the wireless connection is working on the printer by installing the software on my old Dell Laptop and it works fine between the PC and printer. It's also working with the USB lead between the Mac and the printer but it's just the wireless connection that seems to be the problem.

You select the options in the Print dialog of the application you are using. Just be sure you have the extended dialog showing (big down arrow next to the Printer drop down menu.) There are various options presented, some of which are in additional drop down menus.

Similar Messages

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
Paolo

Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

Wireless printing - problem with MAC integration

Hi everybody.
Just bought a Macbook pro and cannot get it to recognize my printer.
Devices within network:
- Belkin WLAN Router
- HP Laserjet CM1312 multifunctional printer - with HP 2101nw wireless G (printing and even scanning works fine wireless!)
- Acer Notebook with XP Home (used to set up the 2101 wireless)
- Acer Netbook with XP Home (added later to network, no problem with printing, setup took 5 min)
Antivirus software: Avira Premium Security Suite on both XP's
WPA-PSK encryption, no mac filtering.
The Macbook can access internet, but nothing happens when I try to print. I wanted to stop the hassle that Windows is causing occasionally. Frustrating experience with the Mac so far.
Can anybody help?
This question was solved.
View Solution.

I have removed the printer, and added again - a couple of times. I was not sure what protocol to chose (LPD, IPP, Socket).
I took your advice and tried, but with the right click (ctrl pressed), nothing happens. The normal window for the print queue opens, and I cannot select anything like "Reset Printing System".
This does not work either, no Printer with "Bonjour" is offered for selection:
"Select the plus sign to re-add it. Look for the printer with Bonjour next to it, select it and wait until the "Add" button becomes available. Click it."
When I select the plus sign, I can only make settings in the "IP" area. Standard, Fax and Windows have nothing to select or to put in. "IP" offers Protocol to select and Address to fill in. I put in 192.168.2.6 and tried the different protocols. "Print with" offers generic PostScript printer, Generic PCL Laser printer, "other" and printer software - thats where I selected the driver for the cm1312
Can you tell what I did wrong? Thanks for trying

Printing/creating PDF problems with Mac OS 10.6.4 and word v.X

In my job at university I use Word 2003 (version 10) in my new iMac. Since I updated to MacOS 10.6.4 I have problems with the printing menu. That means that I can not print or convert to PDF or even generate a preview. When trying to print or obtain a preview, word freezes and I have to force quit. When trying to generate a pdf file it does, but the generated file is unreadable (it says is damaged) and word freezes again. I have played with the preferences, change user and it didn't help. I checked the Font Book and indeed they were many duplicated fonts. I sorted them out, but the problem persists. With very short files it works, but with longer ones word invariably crashes when trying to print or make a pdf. I took one long .doc file and I copied into my laptop (MacBook pro, 2008) that was running 10.6.3. I printed it and converted to pdf; no problems at all. Then, for the sake of knowledge, I updated the system to 10.4.6 and then I couldn't print or create a pdf with the very same file, so it seems that certainly the update is reponsible. So now I know cause but I can not print from any of my computers. To me convert to pdf is an important functionality so I would appreciate any help. I have some ideas: reinstall Office 2003? reinstall 10.6 from the disk (and not update)? use Time Machine to restore the system as it was before the update?
I didn't detect problems in Office 2004, or any other programs in my macs. Unfortunately, I need Office 2003 for compatibility with some other software. Thanks in advance!

I updated my MBP to 10.6.4 last night and today I was printing fine from Word 2008 (v12.2.5). I haven't used Office vX since Tiger so I cannot comment on its stability with the latest update. But I suggest that if you haven't done so already, try opening Disk Utility and running Repair Disk Permissions on the 10.6.4 partition. Once this has completed I also suggest that you reset the printing system, restart your Mac and then add your printer queues again.
*How to Reset the Printing System*
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse (or right click if supported).
4. Click "Reset printing system ..."
5. Restart your Mac

Windows 8/8.1 Partial Print Problems with Networked Inkjet Printers (Envy, Officejet and Deskjet)

There are a lot of threads being posted about this problems with printing on the following these devices when they are connected in a Network Environment (Wireless or Wired)
HP Officejet Pro 6830
HP Officejet 6800
HP Officejet Pro 6230
HP Officejet 6220
HP Officejet Pro 8610 e-All-in-One Printer series
HP Officejet Pro 8620 e-All-in-One Printer series
HP Officejet Pro 8630 e-All-in-One Printer series
HP Officejet Pro 8640 e-All-in-One
HP Officejet Pro 8650 e-All-in-One
HP Officejet Pro 8660 e-All-in-One
HP Officejet 7610 Wide Format ePrinter
HP Officejet Pro 3610 Black and White e-All-in-One
HP Officejet Pro 3620 Black and White e-All-in-One
HP Officejet Pro 251dw Printer series
HP Officejet Pro 276dw MFP series
HP Officejet 7110 Wide format ePrinter
HP Officejet Pro 501dw Printer
HP Officejet Pro 401dw Printer
HP Officejet Pro X451dw Printer
HP Officejet Pro X576dw MFP
HP Officejet Pro X476dn MFP
HP Officejet Pro 451dn/551dn MFP
HP Officejet Pro 451dw/551dw MFP
HP Officejet 4630 e-All-in-One
HP Deskjet Ink Advantage 4640 e-All-in-One Printer series
HP Deskjet 2540 All-in-One Printer
HP Deskjet Ink Advantage 2540 All-in-One Printer
HP ENVY 5530 e-All-in-One Printer
HP Deskjet Ink Advantage 4510 e-All-in-One Printer
HP ENVY 4500 e-All-in-One Printer
HP Deskjet Ink Advantage 3540 e-All-in-One Printer
HP posted a workaround for this problem while they were working with Microsoft to get the root cause of the problem, many customers commented that the workaround helped them out and they were able to print. This workaround was not easy to use as the customer needed to add another printer manually and changed drivers.
We can now announce that the problem has been fixed, the problem involved a Microsoft Network component that HP was using to talk to and track the printers on the network. This fix is being rolled out by Microsoft via Windows Update and anyone who has Windows Update enabled and set to automatically install updates should have already received this update. For those that do not have Windows Update setup to automatically install fixes the fix is available now and should be installed.
The details of this fix and a manual method of installing it can be found here.
http://support.microsoft.com/kb/3000461
This fix is only designed for users that are using there printer on a Network (Wireless or Wired) and will not fix partial printing problems encountered with USB connections.
There are many threads in HPs forums about this issue (below are links to a few of them)
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/Missing-partial-prints-amp-Printer-Offl...
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-Envy-4500-cancels-job-in-the-middle-...
http://h30434.www3.hp.com/t5/Other-Printing-Questions/Only-prints-half-a-page/m-p/4054888
JonW
I work for HP

@tenkeypro
First, I would suggest you uninstall the exsisting driver and reinstall following one of these documents to see if it will clear this error message:
Install HP print and scan software on a Windows 8 computer (32-bit and 64-bit)
Universal Print Driver (no scan)
Driver support included in Windows 8 / Windows 8.1 or in Windows Update
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Problem with Mac graphics card (radeon 5750) and PP?

I've had Apple try to solve the sluggish scrubbing and editing problem in Premiere Pro CS6 on my iMac (i7 2.93GH with 12 GB RAM). They have replaced the internal disk, the logic board, and 5750 processor, all with no solution. What's the solution?
Is there an unsolvable problem with this processor and Premiere Pro?
dmingo

Welcome to the forums, and congratulations on your excellent English usage and grammar.
The usual cause of video problems in these iMacs is something called the PAV board. The graphics cards themselves are seldom an issue. The board can be replaced as a unit, and is usually available on eBay as a iMac PAV board or Down Converter.
It's not a normal user replacable item. Although some posters here do it regularly, I don't. I find it more efficient to buy another unit off eBay. Often the used iMacs are nearly the same price as the PAV boards.
Takeapart for swapping drives - slot load is a series of pictures that will help if you need to open the machine.
David

Problem with mac osx 10.6.4 and audio firewire device

ok i use an edirol fa-66 , the problem is a random one , sometimes when i play music with itunes , logic or even the preview mp3 feature , the sound go downsampled and then stops, the only way to return is turn off and turn on the audio interface. I had this problem time ago only with logic 9.0.2 but with the version 9.1.1 everithing got right. Now with osx 10.6.4 the problem come back on all the audio programs (not only logic),so i have returned to 10.6.3, everithing works fine.
conclusion
in 10.6.4 there is something wrong with the core audio that is incompatible with edirol fa device.
maybe with osx 10.6.5 apple can resolve this?
i'm thinking to buy a motu device (they have their driver and don't use core audio)

up

Problem with mac os x v10.7 and ./configure in terminal

Hi,
I have been trying to install a program via Terminal however i get error message and and the installation terminates.
When I checked in the configure.log , i saw ..."configure: failed program was: | /* confdefs.h. */ | " how can this be fixed ?
thanks
Jis

hey my friend i figure out a way to fix it. do te following
If you have any external hardrive or usb drive or sd card remove it. If you have acces to a windows computer, plug your devices there and delete all the .something files that are created by mac os. Make sure to setup windows so you can see hidden and system files. Delete all thos .somethig files and olders.
Then plug in and reboot your mac and run the rm command now it will work

Printing problems with InDesign CS3 with Mac OS 10.6.3

I am not new to InDesign... I have CS3... but I am brand new to Mac Snow Leopard (OS 10.6.3). Although I can open CS3 and use the application, I cannot print with it. None of my other applications has printing issues... just CS3. Any suggestions?
Richard

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Printing problems with InDesign CS3 running on OS 10.6

I recently upgrade my old G4 Mac (OS 10.4) to a new Mac Mini running OS 10.6.6. I am still running CS3 and have encountered only one problem. When I print multiple copies documents from InDesign that contain several layers, each copy is processed separately, so that it can take several minutes just to send the print job to the printer if I'm printing over 20 copies. Then once the print job is processed the printer pauses between every copy, which is tripling the printing time. If I print a simpler document with only one or two layers it processes all the copies at once, as it should. I am printing on an Okidata 6150 color laser printer.
I never had this problem on my old computer. I'm wondering if this is one of the "unsupported" bugs of running CS3 on Snow Leopard. I want to make sure that this is a problem unique to running CS3 with Snow Leopard before I go ahead and upgrade to CS4 or CS5.
computer: Mac Mini core 2 duo 2.4 ghz processors, 4 gb RAM, printer: Okidata 6150 DN color laser printer.

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Printer problem with AW 6.2.9

I have a recurring printer problem with both hp deskjet 5150 and Epson R220. After much work with techs at both, we have determined that it is an AW problem (v. 6.2.9) Other files print okay. I've searched through recent posts and found similiar questions, but the answers aren't specific to my problem. I gather that it involves trashing certain AW files, such as Appleworks.plist and other Appleworks prefs. It will help it I know the specific files to trash and as much detail about how to find them on the HD. I will be infinitely grateful for any help.
OSR
Mac G4 Mac OS X (10.4.6)
Mac G4 Mac OS X (10.4.6)

Welcome to Apple Discussions
You are correct that deleting the AppleWorks preferences can fix some printing problems. I'm surprised that in finding that information you didn't come across a post with the specific information or a tip to my user tip, AppleWorks has stopped working correctly, that explains which preference files ot delete.
Make sure you have the newest printer driver for each printer. Also, use Disk Utility to repair permissions after any system update or upgrade.

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Refer below link once
App doesn’t open | Progress wheel spins continually

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

Printing problems with hp laserjet 1018

- printing problem with my hp laserjet 1018 (no *.pdf files!), all other documents were printed
- hp photosmart premium c309 works with all file types
Windows 7 64 bit
Adobe Acrobat Pro 10.1.7
Acrobat Reader 11.0.3

Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

Printing problem with Mac OS 10.5.6 and HP Photosmart C8180

Similar Messages

Maybe you are looking for