Printing problem with my web pages

Hi all-
I noticed a funny problem with one of my web pages. When I go to print, it only prints one page length of a webpage that should be two pages long (assuming you choose the shrink width to fit one page wide option in your print command).
I post messages with training schedules and people sometimes want to print the page, I'm not looking for pdf or anything, just a simple print the whole web page. When I print, the second half of the webpage comes out blank. I tried saving at a pdf from the print window, and the same thing happens.
The page I'm trying to print out is at:
http://web.mac.com/gdefrancis/FSNordic/FSTeam_News/Entries/2008/12/22_JNT_Holiday_Training_and_PracticeSchedule.html
Note that is stops printing (or leaves a pdf converted from the webpage blank) after the 12.21 entry.
any suggestions?
thanks!
Greg

Greg ~ On a now archived thread, you wrote:
I would love people to look at my various sites and let me know what you think!
Looking at your Nordic Ski site, it occurred to me that it could benefit from some Social Networking features. Take a look at this site:
http://my.steamboat.com
...built with this free, web-based tool:
http://www.ning.com
Each Network's "look" is fully customizable — click on the thumbnail for their product overview:

Similar Messages

Display problems with allowing web pages to use their own fonts, both on and off.

I refer to the "Allow pages to choose their own fonts, instead of my selections above" option in the Content > Advanced tab of the Options menu.
When I have this option unchecked, allowing my font choice to override the default non-image generated text for web pages, it seems that many icons and buttons on numerous sites are replaced by some sort of hex code malfunction. They appear as small boxes with four characters inside. I'm sure someone knows the official term for what these are and why they occur.
When I have the option checked, however, any non-image generated text on numerous websites appears as an ugly Stencil font that I simply cannot find the origin of. It should not be and clearly isn't the default font for all of these different sites. By "non-image generated text", I mean any text that is not incorporated into the design of the page.
This issue has persisted through several full re-installs. Any insight into a solution for one or both sides of this problem would be quite appreciated. Thanks for reading.

You would have to remove (uninstall) or reinstall the Georgia font if it is currently corrupted.
You can use the System File Checker to check for missing and corrupted font files.
It needs to be run from an Elevated Command Prompt.
Open a cmd.exe window as Administrator:
Start, click Programs, click Accessories
Right-click Command Prompt, and choose "Run as administrator"
Click past the UAC Screen
After the cmd.exe prompt, type: sfc.exe /scannow and press Enter
* http://windowsforum.com/threads/system-file-checker-a-great-windows-fix-tool.19250/

How many of us are having problems with accessing web pages?

For five days I have been having problems accessing web pages, constantly getting the message
Safari can't connect to server etc. etc. It takes me ages just to get to one page without permanently returning to the previous one & trying again. I have tried to use these support pages & find it increasingly difficult to just open a page let alone post anything. If this works I'll be amazed!
I have checked with my ISP - British Telecom. who say there have been a lot of "worms" & 'viruses" across the internet in the last week. Has Safari been contaminated or is it just the www that is the problem? Has anybody at Apple investigated this problem?
I am getting increasingly frustrated by the whole thing as nobody seems to come up with a viable answer. Even if Safari is at fault it would be nice to know where we stand & that somebody is trying to do something about it!

Thanks for that suggestion petitbjs. I think all is OK now. It started without warning, I hadn't changed anything, I just tend to use everything on the computer as it came, I'm a bit chicken to change anything incase I mess it up!!
Starman et al,
I had to phone BT this evening when I found my internet wireless phone wasn't connecting when I dialled out, it was the same yesterday evening but as I was trying to phone my son in Rio & was expecting him to move house at any time, I thought he might have had the phone disconnected, or it was just something wrong their end as I had the dialling tone OK & assumed the phone was fine. I have been using the landline, both of which go through the Home Hub, all through the last week without any problems.
Eventually the BT man had me unplugging the Hub from the mains whilst holding down the Wireless Association button, after which it was OK, however during all this (apart from when it was unplugged, obviously) I still had uninterrrupted internet service as I had to log into the BT website to check the configuration or something, & the chap seemed to think the phone's hub problem would have had nothing to do with my internet problem over the past few days.
Anyway, things seem to be fine now, I'll just hope it stays that way but at least I can try the unplugging trick if I have similar problems in the future.
Once again, thank you all for your help & suggestions, it is a great comfort to me knowing that I have these boards to call on for assistance on virtually any problem I have with my Mac. Before he moved to Rio I could cry "Help" to my son too, hopefully once they move & get set up with an internet connection next week we will be able to video chat (the whole reason I bought the new Mac!).
Many thanks to all,
Carol.
Wippitwalker

Safari problems with certain web pages dowloading a page instead of display

on some sites when i click a link to go to or open a page, it downloads the link. this happens with ebay for example where when i click on a link, it downloads ebay.dll instead (i know, weird). and now, ebay.com isnt even opening - i just get a blank page. it happens with .asp pages and .js pages too. everything seems to work fine in firefox. i was also having problems with gmail which would not allow me to click on links and if i typed, it would jump to another field on the screen if i typed a non-alpha character (i know, weird). that seems to be fixed now and i can use gmail.
not sure what the problem is. any ideas?

You would have to remove (uninstall) or reinstall the Georgia font if it is currently corrupted.
You can use the System File Checker to check for missing and corrupted font files.
It needs to be run from an Elevated Command Prompt.
Open a cmd.exe window as Administrator:
Start, click Programs, click Accessories
Right-click Command Prompt, and choose "Run as administrator"
Click past the UAC Screen
After the cmd.exe prompt, type: sfc.exe /scannow and press Enter
* http://windowsforum.com/threads/system-file-checker-a-great-windows-fix-tool.19250/

Solve safari 6 problem with opening web pages

Note the steps to do so at the end of each stage try to test Safari, this training is complete and to resolve all problems.
Go to disk utilities and run repair disk permission .
go to Keychains and go to the first aid, then run the repair option.
From within Safari, the safari menu, reset safari options and Run.
Go to system preferences, network, advanced options and dns tab, use the following dns, 209.244.0.3, 209.244.0.4, 8.8.8.8, 8.8.4.4, and then click OK and click apply, then open Terminal and run dscacheutil-flushcache command,
If none of above works , this will 100% work, go to terminal , note that this will erase all safari data and bookmarks, run command below
Code:
mv ~/Library/Safari ~/Desktop/Safari-`date +%Y%m%d%H%M%S`; \
rm -Rf ~/Library/Caches/Apple\ -\ Safari\ -\ Safari\ Extensions\ Gallery; \
rm -Rf ~/Library/Caches/Metadata/Safari; \
rm -Rf ~/Library/Caches/com.apple.Safari; \
rm -Rf ~/Library/Caches/com.apple.WebKit.PluginProcess; \
rm -Rf ~/Library/Cookies; \
rm -Rf ~/Library/Preferences/Apple\ -\ Safari\ -\ Safari\ Extensions\ Gallery; \
rm -Rf ~/Library/Preferences/com.apple.Safari.LSSharedFileList.plist; \
rm -Rf ~/Library/Preferences/com.apple.Safari.RSS.plist; \
rm -Rf ~/Library/Preferences/com.apple.Safari.plist; \
rm -Rf ~/Library/Preferences/com.apple.WebFoundation.plist; \
rm -Rf ~/Library/Preferences/com.apple.WebKit.PluginHost.plist; \
rm -Rf ~/Library/Preferences/com.apple.WebKit.PluginProcess.plist; \
rm -Rf ~/Library/PubSub/Database; \
rm -Rf ~/Library/Saved\ Application\ State/com.apple.Safari.savedState
this solotion was writen by me (iLight)
source is
http://m4m.ir/37657

well friend, thanks again for all your help. i found a lot of help on another thread if you're interested: http://discussions.apple.com/thread.jspa?threadID=1195713&tstart=0
regardless, here's some things i did that seem to have helped for now... significantly speeding up my web browsing:
1. I changed from WPA/WPA 2 to just WPA 2 (this seemed to have helped the most)
2. I added two 'general' DNS addresses in my preferences/network settings (this also seemed to help):
208.67.222.222
208.67.220.220
3. under my preferences/network settings, I completely turned off Configure IPv6. (I don't know if this has helped but it was suggested and it doesn't seem to have hurt)
Unless I'm connected to a cisco client, I still have very slow to no browsing on the apple discussions pages but all other pages seem to be working now without cisco.
until next time.

WRT54G Problem with loading web pages on my macbook.

I have three computers on my wireless lan, 2 pc's and 1 macbook. The 2 pc's (one connect directly to the router) and the wireless one are working fine. I pinged 192.168.1.1 and I'm getting 1ms everytime. I pinged 192.168.1.2 which is the wireless pc I assume and it also comes back with steady 1ms. Now i pinged 192.168.1.3 the macbook and I get this.....
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\lehel>ping -t 192.168.1.3
Pinging 192.168.1.3 with 32 bytes of data:
Reply from 192.168.1.3: bytes=32 time=88ms TTL=64
Request timed out.
Reply from 192.168.1.3: bytes=32 time=61ms TTL=64
Reply from 192.168.1.3: bytes=32 time=85ms TTL=64
Reply from 192.168.1.3: bytes=32 time=6ms TTL=64
Reply from 192.168.1.3: bytes=32 time=30ms TTL=64
Reply from 192.168.1.3: bytes=32 time=52ms TTL=64
Reply from 192.168.1.3: bytes=32 time=75ms TTL=64
Reply from 192.168.1.3: bytes=32 time=98ms TTL=64
Reply from 192.168.1.3: bytes=32 time=18ms TTL=64
Reply from 192.168.1.3: bytes=32 time=41ms TTL=64
Reply from 192.168.1.3: bytes=32 time=64ms TTL=64
Reply from 192.168.1.3: bytes=32 time=87ms TTL=64
Reply from 192.168.1.3: bytes=32 time=8ms TTL=64
Reply from 192.168.1.3: bytes=32 time=32ms TTL=64
Ping statistics for 192.168.1.3:
Packets: Sent = 15, Received = 14, Lost = 1 (6% loss),
Approximate round trip times in milli-seconds:
Minimum = 6ms, Maximum = 98ms, Average = 53ms
Control-C
^C
C:\Documents and Settings\lehel>
I also changed the name of my network, its not linksys.
Could anyone help me try and figure this out, its really a pain surfing the web on the macbook.

well...as per your post 192.168.1.3 is the ip add of the macbook .. as you are trying to ping the macbook from a different computer ... it doesn't actually reflect whether the macbook can load webpages or not ...
rather you should try pinging some website add from the macbook to check whether it is able to ping it or not...and as the other 2 computers don't have any problem i don't think it has anything to do with the router settings ..

Problems with https web pages and my iptables scripts

[root@Arch root]# iptables -A INPUT -p tcp -i eth0 --sport https -j ACCEPT
iptables v1.2.10: invalid TCP port/service `https' specified
Try `iptables -h' or 'iptables --help' for more information.
Why?
In others distro it works perfectly ...

the iptables comparison is performed on the packet itself, and its contents. If you sniffed the packet, you would see that the source for the packet is the machine of the person requesting the website, and the destination of the packet would be your server.
Since the packet is allowed in the the rule, it gets to the box. The outgoing return data is either allowed by default (some people let anything out, but only filter incoming) or allowed via connection tracking (since it is part of a message that was allowed in, it gets allowed out).
You can do a man iptables to find all kinds of other info, and searching google helps too. Best thing of all to do is just fire up a packet sniffer and watch...
8)

Firefox is having problems with certain web sites, but IE is ok

Top of page is present in IE but not in latest Firefox.

Is it a safe assumption that website is your's? <br />
What difference does it make which browser '''''you''''' use? Isn't your website for client's or potential clients?
That said, I don't have a problem with that web page on Firefox 2.0.0.20, 3.0.19, 3.5.16, 3.6.13, or the 4.0b9 nightly - it looks the same as in IE8 on 32-bit WinXP SP3, with an AMD 64-bit processor.
The problem shown in your screenshot is with your own Firefox installation. It's like all the "styling" is turned off.
''''' "I infer Firefox needs a 64 bit version." ''''' <br />
What good is a 64-bit browser without 64-bit plugins? <br />
Adobe still hasn't released a 64-bit version of Flash, although they do have a "preview" version available. <br />
http://kb2.adobe.com/cps/000/6b3af6c9.html
''BTW, Mozilla does have a Windows 64-bit version of the Firefox 4.0 betas that is being tested now, but it is not going to be released in Jan / Feb when Firefox 4.0 is released. It will probably be released later in 2011 with one of the 4.# versions, I suspect right after Adobe has a 64-bit Flash release version.''

Problem creating a PDF from the "print view" of a web page

When creating a PDF from the "print view" of a web page, the features in the print dialog box overlap. When the PDF is created, the words are garbled. e.g. words apppear as jzhhhxxf or zxihcj.

Use a job settings that embeds the fonts. If you look at the PDF, the font properties probably do not look correct and don't include embedded fonts. Also, set the printer to Adobe PDF before you try to do a print, so that the web page can try to properly adjust to the printer.
Why not just try opening the web site directly in Acrobat?

Since latest upgrade I cannot "print" or show "print preview" from any web page. This is true of both of my printers and I have followed directions on plug-ins and have reinstalled Firefox etc. I am about ready to switch to Internet Explorer! w

Since upgrading Firefox, it doesn't respond when I click on print and/or print preview while displaying web pages.. No error message, just no response. I tried using both my printers..a HP and a Canon and get no results with either. I have no problem printing from any other place (including "Print" instructions within web pages, usually). I have recently upgraded my desktop (Dell Vostro 220) to Windows 7 and it went smoothly. The Firefox upgrade came at about the same time, so I don't know if Windows 7 is part of the problem. I need be able to print from the screen of web pages!

Hi jjoyceeric,
Have you looked at the Knowledge Base article [[Firefox prints incorrectly]]? There is some good troubleshooting information in there. I would suggest that you try resetting your print settings.
Hopefully this helps!

Acrobat Pro 9.5.4 Update causes PDF to print more like a web page

Something changed from 9.5.3 to 9.5.4 such that PDFs opened within a browser (FireFox) now print more like a web page. This has caused several issues.
1. Printing now uses the header/footer printing preferences of the browser. All PDF's I print from within the browser print with the URL in the upper right, time/date in the lower right and all the other header/footer preferences in the browser. This was never the case before.
2. Font sizes and text location are different. We print checks, invoices from PDF's generated within our business system. These are now misaligned compared to what they have been because of this change.
It's possible this is related to a browser update but I haven't pinned this down yet. I'm using Firefox 19.0, Windows 7, 32 bit.
Any insights are appreciated.

Hi,
This is not happening because of Acrobat update but the reason for this change is that Firefox 19.0 has introduced its own Javascript PDF viewer.
You can change the settings in browser to use Acrobat plugin for viewing PDF files. Go to Options->Application to chnage the settings, please see attached screenshot for more details.
Hope this solves your problem.
Thanks.

Why can I not print anything from a web page?

Why can I not print anything from a web page?

Thank you, but I still haven't solved my problem. I tried the reset suggestion. But I cannot find print.print_printer preference. Maybe the word "printer" is to be replaced with the name of my printer. But because of the warning that making any changes is a very dangerous thing to do, I hesitated to do anything.
I have located the Print to file option, but it is not checked.
This problem did not exist before the Firefox update of about 6 months ago. Today I downloaded the latest Firefox update, hoping that would solve my problem, but it did not.
Thank you for your continued assistance.

Problem with Frameset and page session

All,
I am having a problem with Framesets and page session attributes. I
have a client who's application uses a three frame frameset. They
have a requirement on several pages that when a button is pushed two
different pages load into the right and left frames. The way they
are accomplishing this is that on the pages were this is required,
they are adding target="_top" to the form declaration in their JSP.
Then they store the page names they want to display in session,
forward the request to the frameset, the frameset then determines
which pages to display based on the session variables. This works
exactly how they want it to.
Here is our problem. We need to store some information in page
session attributes. We have tried to get a handle to the desired
view bean and call the setPageSessionAttribute method. However,
since we are forwarding to the frame and the frame handles displaying
the desired JSP, that view bean we had the handle to is not the one
that is created to hand the display of the JSP.
The next thing I tried was to use the request object. In the
handleBtnRequest method, I set an attribute in the request object. I
then query the request object in the beginDisplay event of the view
bean. When the frame is reset the request object does not contain
the attribute that I have set. I'm confused by this because I
thought the request object would be available to me throughout the
life of the request.
Given the above information, does anyone have any suggestions? Also,
am I going about this in the wrong manner.
The client had been storing this information in user session, which
seemed to work. However, since the data being stored dealt
specifically with data for the requested page, we felt that storing
it as page session was more appropriate.
Thanks,

The script on your page web page has some obvious bugs.. Best
fix those
first before looking to blame Flash.
Jeckyl

Printing problem with Summarize Comments?

Printing problem with Summarize Comments in Pro 10.1.6? When I print, I only get the number boxes on one page and the comments on the next page. The numbered boxes don't show up on the actual image itself.

Um I dont know if im doing something daft but I tried this like you said
PrinterJob printJob = PrinterJob.getPrinterJob();
printJob.setPrintable(this);
if(printJob.printDialog()){
try {
          PageFormat pageFormat = printJob.defaultPage();
          if (pageFormat.getOrientation() == PageFormat.PORTRAIT) {
          landscape = 0;} else {
               landscape = 1;}
          System.out.println("THE ORIENTATION IS "+ landscape);
          printJob.print(); }
catch (Exception PrinterExeption) { PrinterExeption.printStackTrace();}
and it doesnt seem to work as I tried it both as landscape and portrait in the print dialog but landscape is always 0.
cheers
pmiggy

List of Problems with new Web Mail

List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down. It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to. The initial display shows 7 usable choices, with the usual slider and arrow to show more choices. The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear. I can't move the selected field with arrow keys either. I can select any of the visible 7 choices, and move an email to only one of the 7. NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser. Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear. No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same. Very unclear.
- How can I switch my service back to the original, basic, email which works ok? I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff. If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!
Thanks!

vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

Printing problem with my web pages

Similar Messages

Maybe you are looking for