Printing problem with officejet l7650

Hi, when i print in Word, the last line is not complete. The print mist the alf of the line, just the upper of the line appear.
I upload the new driver, i print without spool etc.. the problem is the same.
Please help me!!

Have you tried printing with another word processor to see if the print problem is with Word or something else? You can print Word documents with the free program Openoffice, which you can download from download.com or Openoffice.org
If you find the problem is with Word, Try uninstalling and reinstalling Word. First, you may want to download the free utilities Glary Registry Repair & Glary Utilities. Run both of them, reboot Windows and try a document. If that does not help, then do the uninstall, reinstall. That is easier than trying to run down the exact problem in your Word settings.
--J
"I never let schooling interfere with my education" --Mark Twain

Similar Messages

Printer problems with Officejet Pro 8500 A910

Dear all,
I have been given as a present an Officejet Pro 8500 A910 (serie number CN16LDM020 and product number CM756A). The people whom I have got it from already had some problems with the printer heads. I have accepted the printer, because I want to have it working again. I do encounter some problems however. I hope you kind people on the forum can help me out and get this thing working again. As a side note: I am only interested in using the scanner, printer (only black and white - I do not print in colour) and e-printing (I understand that it is possible to email documents to printer, so that they are printed whilst you are somewhere else).
Upon installation I have conneted the internet to my wi-fi. Upon installation it made some test prints, whereby the black dots were good, but the cyan and other colours were not. When I now turn off the installed printer and switch it on again it takes the printer about 5 - 7 minutes to initialize. On the touch screen of the printer it is said "Checking printer, this might take 5 minutes", "Checking printheads", "Aligning printheads" and alike notifications. After 5 - 7 minutes the printer gives the following notification: " Failure notice. Alignment failed. Refer to device documentation for details." When I then push the question mark on the touch screen the following notidication is given: " Alignment failed. Check printer quality of the current print job. If it is not satisfactory, try aligning the printer to see if that improves the quality. To align the printhead again, touch (home), touch (arrow right), touch Tools, and then touch Align Printhead." When I follow these instructions, the same thing happens. I have tried the option "Clean printheads" under "Tools". The test prints that come out are again good in black and white and not good in colour.
The ink level of the cartridges is very low for Yellow, Magenta and Cyan. For Black the printer gives a question mark. The expiry date of the cartridges is in 2015. The information on the Self Test Diagnostic Page (you get when you print a report from checking the ink cartridges) gives the following status:
Printhead status
Printhead health: Good (for both Black/Yellow and Magenta/Cyan)
Serial: 7735960 (Black/Yellow) and 7744345 (Magenta/Cyan)
End of warranty: mid-2013
Accumulated ink usage (ml): Black 99/Yellow 71, Magenta 57/Cyan 58
Refilled supply:
Detected in printhead/printer? For all cartidges "yes".
When I try to print a document from Word on my MacBook (which runs on Mac OS X 10.6.8) and the printer is on stand-by, Word recognizes the printer, starts with the print order but then comes with the notifications "Printer offline" and "Cannot find printer" and postpones the print order. Today I reset the printer and the print job that I had before the reset (which was postponed) came out.
Today, I printed a document whilst the printer was not on stand-by (the touch screen was on home menu) and the print was well (it was only black and white). After the print, the printer also made a print report. Again, the colour was bad, but black ink was good. After that print report, the printer started aligning again. After 5 minutes it gave the above-mentioned failure notice (" Failure notice. Alignment failed. Refer to device documentation for details.").
I would assume that the first thing that I should do is get new cartridges. However, since I only print black and white, can't I just buy the Black Ink and disable the other cartridges? Then, I am thinking of not buying HP cartridges (since the warranty term is already over). What cartridges do you reccomend (price-quality)? If new cartridges are installed (previous owner had same problems with full cartridges) and the problems (with print heads) are not solved, what should I do?
On a second note, I want to use the option of printing online. In other words, give a print order on my Iphone to the printer so that it starts printing at home. How do I set this up? How can I test this?
I would be very obliged with your feedback on the above.
Kind regards,
Onno

Hey Onno,
I see you have several items listed about your Officejet Pro 8500a (A910 series) printer. The main issue that stands out is the print quality issue. I would advise starting here with your printer.
From your information I can see that refill or remanufacture cartridges have been used in this printer at some point. It is possible that the ink from these cartridges have damaged the internal ink system of the printer. If you have performed all the troubleshooting steps for the print quality issue you are experiencing, then the next step is going to be replacing the printheads of the unit.
Troubleshooting Print Quality Issues
The 8500a requires all cartridges be available even if you are simply printing in B&W. If the cartridges are low, then you will have to replace the cartridges as needed. Typically by the design of this printer, however, print quality issues do not follow ink levels in the cartridges as ink is piped to the internal printheads, thus even with empty cartridges there is some ink remaining in the system.
The printheads for the 8500a can be found at most HP certified retailers if you decide to attempt replacing them as a step towards resolving the issue. As to the cartridges, I would advise using genuine HP cartridges as HP ink is designed with HP printers in mind. For information about refilled/remanufactured cartridges please click here.
Hope this helps in getting the print quality issue alleviated,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Iphone5 wireless printing problem with Officejet 655A

Iphone 5 won't print wireless on Officehet 6500A. did before but since update won't
This question was solved.
View Solution.

Hi,
Sorry to hear you are having problems printing.
Are you using the AirPrint or ePrint functions? Is the phone able to see the printer?
Some things to check would be that both the printer and phone are still connected to the same wifi network and that there have been no wifi password changes.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Landscape print problem with officejet 6700

I create a project in Print Shop 3.0 Deluxe in Landscape format. When i set HP 6700 print preference to landscape the printed job emerges in portait form with half of my project not printing. What must I do to correct?

There should be orientation setting in Print Shop software. Is that set to landscape or portrait?
Though I work for HP, I'm speaking for myself and not HP. I'm just trying to help with my limited knowledge
**Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.**

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Printing problems with hp laserjet 1018

- printing problem with my hp laserjet 1018 (no *.pdf files!), all other documents were printed
- hp photosmart premium c309 works with all file types
Windows 7 64 bit
Adobe Acrobat Pro 10.1.7
Acrobat Reader 11.0.3

Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

Printing problems with InDesign CS3 running on OS 10.6

I recently upgrade my old G4 Mac (OS 10.4) to a new Mac Mini running OS 10.6.6. I am still running CS3 and have encountered only one problem. When I print multiple copies documents from InDesign that contain several layers, each copy is processed separately, so that it can take several minutes just to send the print job to the printer if I'm printing over 20 copies. Then once the print job is processed the printer pauses between every copy, which is tripling the printing time. If I print a simpler document with only one or two layers it processes all the copies at once, as it should. I am printing on an Okidata 6150 color laser printer.
I never had this problem on my old computer. I'm wondering if this is one of the "unsupported" bugs of running CS3 on Snow Leopard. I want to make sure that this is a problem unique to running CS3 with Snow Leopard before I go ahead and upgrade to CS4 or CS5.
computer: Mac Mini core 2 duo 2.4 ghz processors, 4 gb RAM, printer: Okidata 6150 DN color laser printer.

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Printing problem with Summarize Comments?

Printing problem with Summarize Comments in Pro 10.1.6? When I print, I only get the number boxes on one page and the comments on the next page. The numbered boxes don't show up on the actual image itself.

Um I dont know if im doing something daft but I tried this like you said
PrinterJob printJob = PrinterJob.getPrinterJob();
printJob.setPrintable(this);
if(printJob.printDialog()){
try {
          PageFormat pageFormat = printJob.defaultPage();
          if (pageFormat.getOrientation() == PageFormat.PORTRAIT) {
          landscape = 0;} else {
               landscape = 1;}
          System.out.println("THE ORIENTATION IS "+ landscape);
          printJob.print(); }
catch (Exception PrinterExeption) { PrinterExeption.printStackTrace();}
and it doesnt seem to work as I tried it both as landscape and portrait in the print dialog but landscape is always 0.
cheers
pmiggy

Printer problem with AW 6.2.9

I have a recurring printer problem with both hp deskjet 5150 and Epson R220. After much work with techs at both, we have determined that it is an AW problem (v. 6.2.9) Other files print okay. I've searched through recent posts and found similiar questions, but the answers aren't specific to my problem. I gather that it involves trashing certain AW files, such as Appleworks.plist and other Appleworks prefs. It will help it I know the specific files to trash and as much detail about how to find them on the HD. I will be infinitely grateful for any help.
OSR
Mac G4 Mac OS X (10.4.6)
Mac G4 Mac OS X (10.4.6)

Welcome to Apple Discussions
You are correct that deleting the AppleWorks preferences can fix some printing problems. I'm surprised that in finding that information you didn't come across a post with the specific information or a tip to my user tip, AppleWorks has stopped working correctly, that explains which preference files ot delete.
Make sure you have the newest printer driver for each printer. Also, use Disk Utility to repair permissions after any system update or upgrade.

Printing Problems with PDF - Adobe Acrobat

Printer - HP Deskjet 3070A
Laptop - Asus Zenbook running Windows 7 Home Premium
Issue: Printing problems with PDF (Adobe Acrobat Reader)
Dear All,
Please help!
My printer was working absolutely perfectly until my brother in law recently needed to borrow my printer. He plugged in his laptop running Windows 8 (awful thing that is). Since he did this to print his own PDF, I cannot print mine.
Although all the text will appear on the page perfectly both in the document view and on actual printing, it appears that some of the transparent formatting stuff on a PDF - such as boxes you have to fill in and transparent areas (such as you find on glorious tax forms) are omitted completely. In fact, in their place I was getting a single black dot. Now, after uninstalling and re-installing updates for the printer, windows 7, adobe acrobat reader, etc.etc. I get squat. Just all the text laid out but none of the shading or boxes.
I have tried fiddling with the printer settings; the print as 'photo' option, dpi settings, greyscale - as much as I can think of and I am thoroughly stumped.
In a desperate attempt, I even installed the Universal Printer Drivers - thinking it might have been that. No. All I got was a page of gobbledygook. Consequently, I uninstalled and reinstalled the normal drivers again.
If there are any wonderful people out there with any fabulous ideas about how I can get my shading and boxes back; I'd very much appreciate it. Sadly I have a tax return to fill out (which is already fabulously late) and need my printer to work!
Much appreciation in advance x

Hey there @Reverie!
Thanks for posting on the HP Forums!
I can see that the printer is no longer printing in the correct format after it was plugged into the Windows 8 computer! You mentioned you have run the updates and uninstalled/re-installed the printer software. Have you uninstalled and re-installed the Adobe software? Are you getting the same issue from other programs as well? Are you getting the same issues if you are logged in as a different user on the computer?
I have located the HP Update Software Utility that may be able to help. You can download an run the utility. It may be able to locate any other updates for the printer.
I would also recommend running a disk cleanup on the computer to clear any temporary files and junk files that may be causing some performance or software issues. If you do not know how to run a disk cleanup on the computer please follow this document regarding Delete files using Disk Cleanup. It is recommended to restart the computer after a disk cleanup. After the restart try the print job again!
Let me know if that helped and thanks again for posting on the HP Forums!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Printing problems with InDesign CS3 with Mac OS 10.6.3

I am not new to InDesign... I have CS3... but I am brand new to Mac Snow Leopard (OS 10.6.3). Although I can open CS3 and use the application, I cannot print with it. None of my other applications has printing issues... just CS3. Any suggestions?
Richard

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Default printer problems with adobe 10.1.2

I was having problems printing PDFs since upgrading to 10.1.2. After reading and trying many recommendations, I happened to notice that my default printer(I have only one printer) was listed twice on the print window. The first (default) printer is spelled "HP PSC 2350 series" (upper case 'PSC') The second is "HP psc 2350 series" (lower case 'psc') . The printer is named 'HP psc 2350 series' in my printers and devices, and if I select this printer, the page will print perfectly. Now that I have solved my printing issue, I would like to change the default setting on the adobe print window to come up as the active link, so I don't have to continue to select a different printer everytime I wish to print a document. The printer by the lower case "psc" name is set as the default printer in printers and devices, and I cannot figure out why it doesn't come up as the default printer on the adobe reader print window. I also cannot figure out how to change the default in the print window.   An added interesting fact is that I get no response in the print window when I try to select "preferences' or 'advanced' for the upper case 'PSC' printer.
My computer runs in Windows 7 (64-bit). The printer is HP psc 2355xi all-in-one. Any suggestions are much appreciated

I have not been able to select a different default printer for Adobe, but I can print if I manually select the correct link everytime.
Date: Tue, 6 Mar 2012 13:16:52 -0700
From: [email protected]
To: [email protected]
Subject: default printer problems with adobe 10.1.2
    Re: default printer problems with adobe 10.1.2
    created by AMG13 in Adobe Reader - View the full discussion
I am having the same issue.The correct printer is selected as the default printer on the control panel and there is no driver with the lowercase convention.However, the first printer option that appears is the lowercase convention. Is there any way to select a default printer for specifically for Adobe, as opossed to the PC itself?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4248912#4248912
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4248912#4248912. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Wireless printing problem with hp officejet 100 mobile printer from win 7 dell laptop

My hp officejet 100 mobile printer was working fine with my dell XPS 15 in bluetooth wirelessly until my laptop crashed. Now I can not get it to print internet info except with hard wire connection. Page loads half way and then stops. Must shut down laptop and shut off printer or hard wire and shut off bluetooth. down loaded lastest drivers to no avail. printer will print from cell phone and win 8 computer via bluetooth but not win 7 laptop.

Sorry you are having problems with printing from the internet. I have a few more questions to ask you before I can be of much assistance.
What web-browser are you using?
Do you have any problems printing from Word or other non-internet documents?
What did you do to fix your computer (system restore, clean install of the OS, etc)?
Have you tried an alternate web-browser?
Make sure to install all of your Microsoft updates to see if that helps. Otherwise, answer those questions for me please and I will be happy to help.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Windows 8/8.1 Partial Print Problems with Networked Inkjet Printers (Envy, Officejet and Deskjet)

There are a lot of threads being posted about this problems with printing on the following these devices when they are connected in a Network Environment (Wireless or Wired)
HP Officejet Pro 6830
HP Officejet 6800
HP Officejet Pro 6230
HP Officejet 6220
HP Officejet Pro 8610 e-All-in-One Printer series
HP Officejet Pro 8620 e-All-in-One Printer series
HP Officejet Pro 8630 e-All-in-One Printer series
HP Officejet Pro 8640 e-All-in-One
HP Officejet Pro 8650 e-All-in-One
HP Officejet Pro 8660 e-All-in-One
HP Officejet 7610 Wide Format ePrinter
HP Officejet Pro 3610 Black and White e-All-in-One
HP Officejet Pro 3620 Black and White e-All-in-One
HP Officejet Pro 251dw Printer series
HP Officejet Pro 276dw MFP series
HP Officejet 7110 Wide format ePrinter
HP Officejet Pro 501dw Printer
HP Officejet Pro 401dw Printer
HP Officejet Pro X451dw Printer
HP Officejet Pro X576dw MFP
HP Officejet Pro X476dn MFP
HP Officejet Pro 451dn/551dn MFP
HP Officejet Pro 451dw/551dw MFP
HP Officejet 4630 e-All-in-One
HP Deskjet Ink Advantage 4640 e-All-in-One Printer series
HP Deskjet 2540 All-in-One Printer
HP Deskjet Ink Advantage 2540 All-in-One Printer
HP ENVY 5530 e-All-in-One Printer
HP Deskjet Ink Advantage 4510 e-All-in-One Printer
HP ENVY 4500 e-All-in-One Printer
HP Deskjet Ink Advantage 3540 e-All-in-One Printer
HP posted a workaround for this problem while they were working with Microsoft to get the root cause of the problem, many customers commented that the workaround helped them out and they were able to print. This workaround was not easy to use as the customer needed to add another printer manually and changed drivers.
We can now announce that the problem has been fixed, the problem involved a Microsoft Network component that HP was using to talk to and track the printers on the network. This fix is being rolled out by Microsoft via Windows Update and anyone who has Windows Update enabled and set to automatically install updates should have already received this update. For those that do not have Windows Update setup to automatically install fixes the fix is available now and should be installed.
The details of this fix and a manual method of installing it can be found here.
http://support.microsoft.com/kb/3000461
This fix is only designed for users that are using there printer on a Network (Wireless or Wired) and will not fix partial printing problems encountered with USB connections.
There are many threads in HPs forums about this issue (below are links to a few of them)
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/Missing-partial-prints-amp-Printer-Offl...
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-Envy-4500-cancels-job-in-the-middle-...
http://h30434.www3.hp.com/t5/Other-Printing-Questions/Only-prints-half-a-page/m-p/4054888
JonW
I work for HP

@tenkeypro
First, I would suggest you uninstall the exsisting driver and reinstall following one of these documents to see if it will clear this error message:
Install HP print and scan software on a Windows 8 computer (32-bit and 64-bit)
Universal Print Driver (no scan)
Driver support included in Windows 8 / Windows 8.1 or in Windows Update
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Printer Problem with HP Office jet 6600

I have the following message displayed on the printer.
There is a problem with your printer or ink system. Turn the printer off then back on if the problem persist contact HP.
I have searched through the HP suggestion for repaid but find no match.
I did change my cartriges for the first time. The magenta supply showes low even though its a new cartrige all the other show full,
I'm under waranty but have no idea how to move forward
Any help would be greatly appreciated

Hi @FrankieP,
Welcome to the HP Forums!
I understand that you are getting the error message, "There is a problem with your printer or ink system. Turn the printer off then back on if the problem persist contact HP". With you HP Officejet 6600. I am happy to help with this error!
I would recommend to look through this guide, 'Problem with Ink System' Error Message Displays on the Computer During Setup.
If that guide does not resolve your issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Printing problem with officejet l7650

Similar Messages

Maybe you are looking for