Printing problems elements 9

All of a sudden I try to print a photo and it gets locked up in the queue and i can't delete it. It acts like it is deleting but never does. The only way i can get rid of it is to uninstall the printer and the reinstall it. it will then print a few pictures and lock up again. It was never a problem before. Any ideas.

Organizer. My wife is the one that uses this program. I have noticed that whatever photo i click on in organizer the file is missing and it asks if i want to browse for the missing file. Apparently there are over 15000 photos in the progaram.

Similar Messages

Printing problem Elements 11

When printing in Orgnizer in Elements 11 the printout is as selected,but in Editor the image in Portrait format is always printed out smaller than selected e.g 15 x 10 cm image prints out as 10 x 9 cm. There is no 'Print Preview' facility available

Thanks for your info.
All parameters were correctly set i.e. Image size 15 x 10 cm, paper size
A4, printer to portrait mode, Center Image deselected and image
positioned on the canvas . Latest printer driver installed recently.
I have no problem with printing in Organizer but do not have
the.editing facilities.
Regards,
G.A.Greenwood

Printing problems with Elements and iPhoto on OSX 10.5.7

I am having problems with printing photos on my printer (Canon iP4000) since getting the new iMac with OSX (10.5.7) and using Photoshop Elements 6 and iPhoto. The Canon printer driver (and all my other data) were copied to my Mac by the techs at the Apple store from which I purchased the iMac. (I previously had a Mac G4 with OSX 10.4.11 Panther.)
Photos that used to come out crystal clear and brilliant on the printer from the G4, now are faint with kind of a white veil. When I try to print in Elements, I get a message that says "Some PostScript specific print settings (Interpolation, Calibration, Encoding) will be ignored since you are printing to a non-PostScript printer." I really have no idea what that means. Anybody?
Text printing comes out fine, both from word processing documents and web pages. I am using the latest printer driver (4.8.3) for the iP4000 (probably 4 years old or so), and there are no new driver downloads available for it. I trashed the Canon software/drivers and reinstalled, to no avail.
Canon Support has been helpful and have made many suggestions, but none has worked. I tried printing with Canon's EasyPhotoPrint app, and the photos print fine. So the problem appears to be a compatibility of the printer with Elements 6 and iPhoto.
Has anyone else had this experience? Does anyone have an opinion if this means I need to get a new printer? If so, any suggestions on a good, moderately priced one for Leopard on the iMac that will definitely work with Elements 6 and iPhoto?

The v4.8.3 driver she has is the latest version Canon has supplied.
Given the driver is working okay from some other applications, there has to be something amiss with the colour management of iPhoto and PSE6.
For iPhoto, as a test I would suggest the Color Options > Color Correction is set to None to see how this impacts the printed image. Then I would try the BJ Standard and ColrSync settings to see how the output is affected.
During the Color Options trial, ensure the Quality & Media > Media Type is set to the appropriate paper type, such as Photo Paper and the Print Mode be set to Top Quality Photo. With regards to the Media Type setting, some of the paper stocks have a profile associated with them. If you use Photo paper but use the Plain setting, then you will get a washed out print.
Pahu

Why won't my printer (Brother HL2270DW) print out Elements User bi-monthly magazine? Screen says PDF format not supported or printer not connected (it is) or shows an empty screen. No other printing problems on any website.

Why won't my printer (Brother HL2270DW) print out Elements bi-monthly magazine. Screen says either printed not connected (not true) or PDF not supported of shows a blank document. No problems printing on any other website.

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Printing Problems with Elements 8.0 and EXIF time data

I've been using Premiere Elements 8.0 in Windows XP Professional for a couple of years with no problems. I shoot mostly in JPEG. I've always imported my images using a card reader (the same one). About a year ago suddenly I ran into printing issues. When I imported my images and tried to print them Elements crashed just at the point where it should begin the actual printing. By chance I discovered that if I adjusted the time EXIF on the images in Elements by either hours or days, back or forward and adjusted them back to the original time/date the problem disappeared. If I had shot in RAW and edited these images there were no problems with the resultant JPEG.
I noted the discussions about Elements changing the time in the EXIF and checked for this but this hadn't happened. The EXIF in camera and in Elements were the same. I also checked this against the time settigs of the camera and they were the same. I shoot with a Nikon D300.
I backed up my images and did a complete re-format of my computer so that it was back to its ex-factory settings, re-installed Elements, restored my catalog from the backup and the problem still arose. I'm reluctant to upgrade to Elements 10 until I (hopefully) I find out if (a) anyone else has the same problem; and (b) if anyone who had it has fixed it.
Any ideas would be very welcome.

Miceal,
I am confused. Do you mean Photoshop Elements? Premiere Elements does not have a Print function. On can Export/Share, but not Print. For Photoshop Elements, you will want the PSE Forum.
Good luck,
Hunt

Printing problems using Photoshop Elements 6

I have been using Photoshop Elements 6 for several years and am currently having printing problems, e.g., some prints are too light, some are too saturated, or too dark...they just don't look like the screen which looks pretty good. I use Spyder 3 Pro to calibrate my monitor. Does anyone know of any websites that address these type of problems. Looking for some advice, tips, etc.
Thanks.

Does this happen only in PSE6 or in other programs that can print graphics, like Acrobat or Word or PowerPoint?
I only ask because my LexMark started to vary color saturation shortly before the print head dumped an entire cartridge onto one page and it gave up the ghost.
It wasn't just pictures. Word documents would go from light to dark. Graphics (business cards, labels) would print bright and then dim on the same page.

Are there any updates to Elements 13 printer problems

I am having printer problems to my wide format Epson with Elements 13. I saw in the community forums that other people are having the same problem with other printers.

Hi ..
Not for a Mac running Tiger v10.4.11.

Upgrade from Elements 7 to Elements 11 poses printing problems

I upgraded from Elements 7 to Elements 11 and now when I print a photo using Elements 11 it is extremely dark (almost black). I am using an Epson R1900 Photo printer and the same settings for printing in both Elements 7 and 11 and can't figure out why the pictures are too dark in Elements 11. Can anyone help with this?

Thanks for the ideas:
Yes, printing in the OS Print program (Windows 8) does produce better
photos than directly through Elements 11. Also, printing from the Elements
Organizer produces the better photos I am looking for and can obtain from the
Editor in Elements 7. I still wonder why the Elements 11 Editor produces
almost black pictures? But at least I have some alternatives for printing
better photos after I have used the Editor and saved the corrected photo.
Corvettelarry.
In a message dated 1/14/2013 8:19:44 A.M. Eastern Standard Time,
[email protected] writes:
Re: Upgrade from Elements 7 to Elements 11 poses printing problems
created by andaleebfatima1
(http://forums.adobe.com/people/andaleebfatima1) in Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/4991885#4991885)

Elements 12 printer problem

Just purchased Canon MG7150 printer. Cannot print from Elements 12. Canon inform me that Adobe do not support this printer.
Is there a plug in?? or way round.
Bought this printer specifically to print photo's.

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

My "fix" to print problems in LR (using MS XP)

Having had the same problems printing from LR as many others are complaining about, I thought that I might give my 2 cents to what I did to solve (?) the problem. I have to run with current setting in a while to be convinced that it is not just an intermittent fix though ;-)
My problem when printing from LR was that the print came out much too Cyan-Green and somewhat dark when color management where handled by LR. When the same photo was exported to PS Elements (PSE) in Tiff with the Pro-photo color profile embedded, adjustments from LR, and printed using the same driver setting and color management, the print came out fine.
I must mention that I have had fine printout in previous LR versions but I'm not sure when the problem started. But at least from LR version 1.3, 1.3.1 I have had problems printing a proper print.
As I'm not 100% sure what caused the fix, I don't want to leave much info un-documented, so I start by describing my system etc.:
- Athlon 64 3500+ with 2 GB RAM
- Lacie 119 LCD monitor (calibrated with a ColorVision Spyder 2)
- Epson Stylus Photo 890 printer; an old (6-7 years) 6 color dye-sub printer, but it can still produce very good prints. (It is BTW, the A4 printer version of Epson 1290).
- Microsoft XP service pack 2
- Adobe Photoshop Lightroom 1.3.1.
- Adobe Photoshop Elements 5
- Latest Epson 890 printer drivers ver. 5.21/P (from 2004)
- ICC profiles for various Epson printer paper
- Paper used: Ilford Printasia Photo Glossy Paper (but I have tried Epson Premium Glossy Photo Paper as well with same results)
I used following setting:
- In printer driver: "No color management" was selected
- LR and PSE color management; printer profile: Epson Stylus Photo 890 Premium Glossy Photo Paper, Rendering Intent: Perceptual
. LR Print sharpening: High
- LR Print resolution: 360ppi
When the photo was opened in PSE and I had printed a small print with above mentioned printer driver/color management settings. The print looked good, but with a little magenta color cast, so I thought that if I used a different printer profile this might help (I have no ICC profile for the Ilford paper). So I chose the "Epson Stylus Photo 890 Photo Paper" instead and printed again, and this time the photo looked as it did on my calibrated monitor. I have to admit I was a bit delighted even though it was from printed from PSE and not from LR, but seeing that color management worked in other applications was a relief.
In PSE, I also I tried changing to a different Rendering Intent before changing printer profile, but with no success.
Another thing that helped further was to change Media Type in printer driver from "Premium Glossy Photo Paper" to "Photo Paper".
After the print success in PSE I went back to LR and changed the Printer Profile to "Epson Stylus Photo 890 Photo Paper" (still with "No color management" and "Photo Paper" selected in printer driver) and printed the photo again. Now the photo looked as good as it did in PSE (!!!???).
Now I have made a few printer preset in LR for various print sizes, and the prints look fantastic. Every time! Do I have to mention that I am a happy guy ? :-)
BTW, remember that a printer preset also saves the printer driver settings. Forgetting this can easily cause some unexpected results.
The only thing is that, I still do not know what fixed the problem, and I am a bit worried that the problem might come back again. Maybe the print related changes made in PSE and the following selection of the same settings in LR did - somehow - "synchronize" LR to a proper color management. Sounds weird, but if it works...
I hope this long explanation was useful to - at least - some of you, who experience printer problems in LR. LR is a fantastic application, and I enjoy using it, but the printer problems has really been frustrating.
Good luck!
/Per

Little unclear about the border thing- you say it prints with a too wide border, but also say:
When I print the image with this set up, it still is printed without a border.
It's a factor of your printer, though; some can never print without a margin around all sides; this can be a border, or cut off. Good news, though; you can have a 5 x 7 borderless, or with any size border you wish if you print on larger paper, and trim to taste.

Printing problem linked to EXIF time data for JPEG images.

For some years I have been using Photoshop Elements 8.0 with no problems of any kind. My computer runs on XP Professional with a system comfortably in excess of the minimum requirements to run Elements 8.0. I load my images into Elements from a card reader which is the same one since I got this version of Elements. I shoot mostly in JPEG with a Nikon D300. I print to one of 2 Epson printers, an SX100 and a PX700W. I don't use the wireless feature of the PX700W, connecting it via USB.
About a year ago I suddenly began to experience printing problems. If I tried to print an image Elements crashed just at the point where printing would begin. By trial & error I discovered that if I adjusted the time in the EXIF data of the image in Elements, whether by advancing or retarding it by hours or days and then adjusted it back to the original time I had no problems printing that image thereafter.
I also discoveredc that where I had shot in RAW I could print direct from the RAW image in Elements or from the JPEG I saved from an edited in RAW and had no problems.
I saw the forum discussions about the issues about the date/time in EXIF having been changed following the import into Elements. For those images I still had on my memory cards I checked the EXIF data in Elements and compared it what was on the image on the card. They were the same. I also checked the time zone and time settings of the camera and they were correct.
I backed up my catalog, re-formatted the computer to bring it back to its ex-factoy status, re-installed Elements and restored my catalog. I imported new images, tried to print them and the problem was still there.
Before I might upgrade to Photoshop Elements 10 I'm hoping someone else may tell me they have had the same problem and, hopefully, be able to tell me how they fixed it. I know the workaround will bypass the problem but it really annoys me that it suddenly appeared and I seem to be stuck with it. I'm also concerned that, given I totally re-formatted my computer but the problem is still with me, that the problem may be imbedded in my catalog and simply gets backed up to,\and restored from, my backup.
I'd be grateful for any ideas.

Hi Miceal,
Though I'm not sure, but see if Catalog repair and optimize helps resolve the issue.
For doing this, click File >> Catalog and selec your catalog and then click "repair' button.
Tick the checkbox for rebuilding indices in the repair workflow.
Now perform the optimize operation on the catalog similarly.
Let me know if that helps.
Thanks
andaleeb

Printing from Elements 11 with a cannon IP8750 I get horizontal banding right across the print .The printer operates for a distance of 10/12mm then pauses and it does this right throughout the print. it will print perfectly well from aperture, iPhoto an

problems with cannon printing from elements 11 . Get severe horizontal banding from elements but not from other photo software help please

Anyone?

Epson Artisan 1430 printing problems

When using PSE 9 to control printing using a paper-specific ICC profile (as I am used to doing), all output from my new Epson Artisan 1430 A3+ printer had a green cast. This was not a problem when printing the same images to a Canon A4 printer. After trying many variations, I could obtain acceptable output if I had the printer rather than PSE control output with Printer Preferences set to Colour Controls>AdobeRGB.
A review of this printer from what I consider a highly credible source (http://www.photoreview.com.au/reviews/printers/epson-artisan-1430-inkjet-printer) stated that similar results could be obtained with either PSE or the printer controlling output. (Incidently, using another software package to print (Corel PaintShop Pro 4) also gave atrocious results.)
Checking with Espon support, I have the most current version of the Epson drivers.
1) Should I just accept that I need to abandon what is generally accepted as best practice and have the Espon control output rather than PSE
or
2) Do I have a faulty printer?

At times it is possible that due to system/app/printer manufacturer settings we do not get the desired print output. In such cases it is wise to choose printer manages color and then choose appropriate color profile to print with. You can also try printing from Elements Organizer with same settings and check if it is fine.
You might want to read these before trying and knowing more:
http://help.adobe.com/en_US/photoshopelements/using/WS287f927bd30d4b1f-5796c0e112e28b07616 -7fff.html
http://help.adobe.com/en_US/photoshopelements/using/WS287f927bd30d4b1fffab87f12e28a86132-7 fee.html
Hopefully resetting the printer preferences to default and then changing the settings as appropriate like paper type etc should help.
Also found one of the similar discussions with Epson printer for green cast : http://www.pentaxforums.com/forums/digital-processing-software-printing/57695-grey-areas-g reen-epson-stylus-photo-1400-a.html - Do read this as well.
-Garry

Lightroom printing problem Epson R1800, XP SP2, colors dark

I'm having no success with printing from Lightroom 1.3.1, with a quite new Epson R1800, on an IBM R51 with Windows XP SP2.
Printing is fine, using Epson's Easy Photo Print, and PhotoShop Elements 2.0. In fact, the results with Epson's Easy Photo Print and Elements 2.0 are almost identical.
I played with ICM on, off, downloaded new Epson icc profiles for glossy paper, loaded new cartridges, cleaned nozzles, etc.
And I searched this users forum and the general web. Sounds like printing problems with Lightroom is pretty normal.
Any other clues or hints to solve the problem? Seems pretty stupid that Lightroom can't be used to print.
...Vick

Vick,
I'm new to printing on my Epson 1800 and am sure others know more than I do, but this might be a start since I had the same problem printing from Photoshop CS3 on a R1800 and R200. I think the problem is in the printer properties/printer dialog setup and since the problem is the same maybe the solution is also the same.
In Lightroom click File - Print Settings or, to get to the same place, click File - Print and click the Page Setup or Print Settings or Print button. Whichever, it takes you to the print setup for the 1800. Click Properties which takes you to the Epson Stylus Photo 1800 Properties window. In the bottom right, click Advanced button. A "note" warning about making changes pops up. Click continue. Under the Main tab, color management make sure ICM is NOT selected. I have "Color Controls" selected. Click OK (twice I think) to get back to the Lightroom print window. This corrected the dark colors problem I was having. When printing in PS3 it asks, "Did you enable color management in the printer dialog?" Somewhere else I found the suggestion to disable ICM color management when printing from PS3. So much to know!! Hope this helps.
Allen Round

How Do I Center an Image for Printing with Elements?

Elements 9 and 11: When I select "center" in the printing que the printed image is always shifted to the left of page center.
What am I doing wrong? New computer, new printer, and Elements shifts the image to the left!!
I downloaded the Elements 11 trial version to see if that would fix the issue but it does the same thing!

My original problem:
--> 3 elements in a panel, a title image
(JLabel topImage = new JLabel(new
w ImageIcon("WelcomeTitle.jpg"));), a button,
and a bottom image. I wanted the title image at the
top, the bottom image at the bottom, and the button
in the middle. I tried this with a BorderLayout, the
top image being Border.NORTH, the bottom Border.SOUTH
and the button Border.CENTER, however the button
completely filled its panel and was really ugly.
add the button to a JPanel and add the panel to CENTER.
Cheers
DB

Printing problems elements 9

Similar Messages

Maybe you are looking for