Printing problems from Photoshop Elements to Epson XP-800

I cannot print photogrpaic images with my desktop MAC (OS X10.8.4) from Photoshop Elements 9.0 to my new Epson XP-800 printer. Printing is not a problem with Word text or images from iPhoto- it is only with PSE that there is a problem. The problem persists even if I try using a cabled connection rather than WiFi. I have ensured latest software from Epson has been downloaded. This problem did not occur when using the same system with the previous printer (Epson Photo Stylus 1290).
Any suggestions for solving this rather than just a workaround of moving the edited PSE image back to iPhoto & printing from there (which admittedly does work but shouldn't be necessary).
Grateful for any help.
Stuart

Please use the Elements Forum http://forums.adobe.com/community/photoshop_elements

Similar Messages

Transfer problem from Photoshop Elements 9 to Premiere Elements 9

When I transfer a slideshow from Photoshop Elements 9 to Premiere Elements 9, some slides change orientation and appear compressed. How can I avoid this problem?
Also when transfering from Photoshop Elements, Premiere Elements opens a window to record the name of the project; what is the proper setting for the project? DSLR, interface DV...?
Recording a Blueray with Premiere elements from sequences of slideshows saved as WMV (highest resolution 1024x768) , pictures do not fill the screen. I realize that the photo size (4:3) is different from the TV screen (16:9), and that cropping would be necessary to fill the screen, but is there a format WMV for wide screen or can Premiere Elements do the cropping? A wide screen ratio would be nice to have in Photoshop Elements cropping toll.
Thanks for any help you can provide.

One problem with orientation is that many viewing/cataloging programs will allow one to change the orientation, but that is only for viewing - no pixels are actually changed. A flag is placed in the metadata, telling many viewers to rotate the image, when viewed. Adobe Bridge, the big-brother to Organizer, and installed with many Adobe suites and programs, does this. It is not until one does a Save for the image, that the rotation is actually applied to the pixels. Until then, it's just an instruction to a viewer on how to display the image.
I second Steve's comments on the Scaling of stills, outside of PrE, prior to Import. This ARTICLE will give you some background and some tips for automating the process.
Good luck,
Hunt

Printing problem from Photoshop CS2 to HP 3500CP plotter

I am running Photoshop CS2 on the computer connected to my 3500CP plotter. I have for the past few years had no problem printing. This past several days tried to proint a banner for my daughter's birthday and whenI go from Print with Preview to start the print it shows the plotter is receiving the file. The plotter automatically does a printhead check and then shows it is printing but then just starts rolling a blank page out until I stop it and reset everything. I have run several tests on the plotter and all come back good so I am guessing it is coming from Photoshop though I am doing nothing different than I have before. I hope someone has a suggestion sisnce I need this banner before Friday. My daughter turns 33 on 11/11/11. Thank you in advance.

Well... I fixed the problem a little differently. I got a 100% + costs refund from HP themselves and bought an Epson! Boy, was that ever the right decision to make. I've had not a single problem with the Epson where the HP gave me a litany of endless drama. I can't understand why a printer maker needs to create faulty and bug ridden software that wants to take control over both Windows and Photoshop and then they try and blame everyone except themselves.
The HP Z5400 postscript printer proved one important thing to me... You only ever get what you pay for. I run canvas about4 to 5 hours a day with the Epson. I had to stay at work past 8 hours a day just to get the same amount of work out of the HP. For speed, I've never had anything faster than a Canon 8100 but the hidden costs of ownership are horrendous. The HP was the cheapest printer I've had and the slowest. The Epson is economical to run, performs at a reasonable speed and doesn't have any hidden costs.
After 5 months of hassling HP to get the "next day, on-site" support I paid $1200 extra for and never got, I can guarantee you I'll never , ever own another Hewlett Packard product again. I had to go to the Asian Pacific head off to get anyone who'd listen to me. The Australians wanted me to sign a form I'd keep my mouth shut and sacrifice nearly a grand I'd put into it before talking about a refund. Then I discovered they'd been fined 3 MILLION bucks by the competition and consumer watch dog in Australia over telling someone who bought a $200 printer to go take a walk when it dropped its guts a few weeks after buying it. That mob is pure poison for consumers.

Help with printing projects from photoshop elements

I have been trying for a few days now to print a project from my elements 6 program and the colors are way off. I just recently got a new printer, Epson artisan 837. I didn't have this problem with my last printer. The printer prints normal from other programs, and I've tried a ton of different printing settings and I still can't get it. Help please.

In Editor, go to Edit menu>color settings
Check "Always Optimize Colors for Computer Screens".
In the printer settings, check Printer Manages Colors.
The point is that you don't want both PSE and the printer to manage colors.

Printing (not) from Photoshop CC to Epson Stylus Pro 7800

I have a brand new iMac on OS X 10.9.2 and a brand new install of Photoshop CC and printer driver.
When I try to print an image from PS, the file is briefly seen in the print queue and then it disappears, but no printing happens. It gets as far as saying "printing page 1 of 1", but nothing else after that.
The images print fine from Preview and other types of documents also print fine, so it is just from Photoshop where the problem occurs.
Restarting PS and the printer don't make a difference; nor does re-booting the computer.
All help gratefully received!

Contact Epson - they seem to be having a LOT of driver problems on MacOS 10.9.
Photoshop sends the data to the OS, which sends the image data to the driver - and the driver is showing that it has a print job and then losing the job. So this is another Epson driver issue.

Printing problems using Photoshop Elements 6

I have been using Photoshop Elements 6 for several years and am currently having printing problems, e.g., some prints are too light, some are too saturated, or too dark...they just don't look like the screen which looks pretty good. I use Spyder 3 Pro to calibrate my monitor. Does anyone know of any websites that address these type of problems. Looking for some advice, tips, etc.
Thanks.

Does this happen only in PSE6 or in other programs that can print graphics, like Acrobat or Word or PowerPoint?
I only ask because my LexMark started to vary color saturation shortly before the print head dumped an entire cartridge onto one page and it gave up the ghost.
It wasn't just pictures. Word documents would go from light to dark. Graphics (business cards, labels) would print bright and then dim on the same page.

Printing problem from photoshop

Hi, I moved from a PC to an iMac in February this year - and up till now things have been going well.
Here is the problem:
I'm trying to print from Photoshop CS5 onto photo paper, but for some reason this is not going well.
I've tried playing around with the settings I get for the printer from Photoshop - but with no luck.
Here are some pics of what is happening:
Printing on photo paper but in black and white...
Printing on photo paper in color...
What I'm using
OSX (Snow Leopard with latest updates)
Photoshop CS5
HP Deskjet 5552 (with latest drivers from HP)
Will be very grateful of any help - or just to know that someone else is having the same problem.
Cheers

Anyone??
Find it hard to believe that I'm the only person that has the issue...

Problem with printing 6x4 from Photoshop CS5 to Epson 2880

Hi,
bit of an odd one. I can print A3 and A4 no problem, but when I try to print a 6 x 4 it looks like the printer is not reconising the size of the paper. It prints the image the right size, but as though it were printing it on a larger sheet of paper, in the left hand side with a a 5cm space to the right (which is actually the top of the image).
I have set the printer to 6 x 4 for both image and paper.
Any ideas?
Thanks

I have an Epson 2200, but am assuming the drivers and print dialog accesing that driver and ICC profiles are very similar to Epson's 2880, which is the same size as the 2200.
In order to print 6 x 4, whish isn't a standard page size in the print dialogs, are you setting up a custom page size? (Print > Print Settings > Page Size > Manage Custom Sizes) - This works fine here, but if the paper is the wrong size, it won't print. The print driver requires that the paper size actually be 6 x 4.
Of course, an alternative approach might be to print on a standard paper size, maybe adding trim marks, and then cutting the page down to 6 x 4 after printing.
If none of this helps, I suggest you contact Epson's tech support.

Borderless print problems from photoshop

I have recently bought an Epson L800 printer. When I print 'borderless' 4x6 prints using photoshop, I always get a border down the right hand side and bottom of the print. Also the picture is not 100% perfectly straight on the page. The pictures are already sized to 6x45 in photoshop so no scaling should be required.
I took the printer back to Epson, but they printed the same picture by going into Windows explorer and right clicking, and selecting 'preview'. They printed from there, setting the printer options to borderless (as I had for photoshop) and the picture printed perfectly with no borders. we tried again with photoshop and the border returned.
Can anyone help me please?

Hi,
Are you refering to Sun Java Studio enterprise product . The forums for that product are at:
http://swforum.sun.com/jive/forum.jspa?forumID=122

Printing Problem from LR5.3 to Epson 4800

When trying to print to 13 x 19 paper on either of 2 Epson 4800 printeres, the margins and cell size set are ignored and the printers produce a roughly 8 x 10 image in the corner of the 13 x 19 paper. I've tried from 3 different iMacs and 2 different printers (this is a school lab). Paper setting is Super B/A3, though I've also made a custom 13 x 19 paper size and that produces the same error. If I print to 8.5 x 11 paper (with appropriate settings), it works fine. It's only to the 13 x 19 paper that the problem occurs. Everything looks good in the print preview window. Has anyone had this problem or have an idea for a solution?

Fauxto,
I am having the exact same problem with 13 x 19 paper on my R2880, working in lightroom 5, iMac Osx 10.8.5. I did not have this problem before I upgraded to LR5 and Osx 10.8.5. I am still searching for a solution. The problem is erratic. I got lucky and printed a 12 x 16 on 13 x 19 paper yesterday, but after printing some 8 x 10s the 13 x 19 problem returned. I suspect that LR5 and Osx are not playing nicely. This is unacceptable in terms of inability to deliver the finished product to my customer and a very expensive waste of paper and ink.
There must be someone out there having the same problem. I would think Adobe is aware of this issue. Someone PLEASE HELP !!!

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

Problem with Photoshop Elements Printing

I have been using Photoshop Elements for a couple of years now and know it pretty well. Today while attempting to print, a strange problem came up: After going through the protocol to make a print, just before the image prints PE does a very fast auto correction that basically ruins all the color correction I have made on the image. How do I disable this function?

Hi and thanks for your reply. I checked the settings under "Print", "More Options", then "Color Management" and it only has "Print Space", none of the three options that you said I should have. Am I looking in the wrong place?
Date: Mon, 3 Sep 2012 11:14:57 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Photoshop Elements Printing
    Re: Problem with Photoshop Elements Printing
    created by 99jon in Photoshop Elements - View the full discussion
Check your color management by clicking More Options in the print dialog There are basically three options:1) Printer Manages Color2) Elements Manages color3) No color Management Make sure everything is consistent e.g. if you choose Elements manages color make sure color management is switched off in the print driver.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4669848#4669848
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4669848#4669848. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problem sync photos from Photoshop Elements since iTunes 7

I have been having problems syncing my photos ever since Apple launched iTunes 7 and iOS 6. I run Windows 7, I sync my photos from Photoshop Elements to the iPad 2 and the iPhone 3GS. I never had problems with the sync prior to the September changes by Apple. What happens is that only a portion of the photos that I have earmarked for sync in their respective selected albums are making it to the devices.
In terms of troubleshooting, I have tried many things to no avail. I have tried to add a new photo to an album to sorta kickstart a sync. I have deleted the iPod photo cache from the Elements Organizer. I have removed photos from the device. I have tried syncing without syncing Photos.
None of these have worked. It's pretty clear that there is a glitch in Apple's updates, which will need to be addressed along the way. Photos traveled seamelssly in this method until the September updates.
Anyone else experience this, or have any last-dash ideas? It's pretty frustrating.

Of course, by "iTunes 7", I meant "iTunes 10.7", but can't seem to edit my OP.

My printer takes forever to print from photoshop elements 9

my printertakes forever to print from photoshop elements 9 then when it prits the crop is wrong, lots of noise or distortion. It only does this in adobe photoshop elements 9.

Yes it is different from what I see in print preview. I have been saving the file and picking it up in windows to print its so much faster and predictable. It takes forever to print from p-e. I read somewhere the printer needs to be calibrated for color but shouldn't have anything to do with crop or printing speed' Thanks
Den
[email protected]

Printing problem with photoshop

My printer Epson Pro 3880 is not printing anything from photoshop cc

Wipe Preferences first. It fixes a lot of problems quickly.
If that fails to work,
Deactivate from the Help menu.
Run the CC Cleaner Tools to remove all traces of PS from your system.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Log-In & Download from the Creative Cloud.
Re-Install.
Nancy O.

Printing problems from Photoshop Elements to Epson XP-800

Similar Messages

Maybe you are looking for