Printing Problems GI Slip and GR Slip

Hullo fello Sapians
I have printing problems regarding the above. When I have only one output type configured eg WA01 and no WE's the goods issue prints perfectly however the GR slip also prints but in the form of a returns delivery note. I have not created any Returns delivery slip in the system. What could the possible causes be
I have exhausted all the config checks and its 100% so I think
Vishnu
SAP MM Consultant

Hi
Set the parameter ID NDR in the user master record to X.
This makes the print check box to be defaulted to X.
Now you should be able to print the GR from VL32N.
I hope this helps.
Thanx
Prasad

Similar Messages

Printing problem with Pages and iWork

This problem has been troubling me for months. I have an HP OfficeJet Pro K5400 colour inkjet printer. I have installed the latest s/w drivers so it's all up to date as far as I'm aware. The problem is that when printing from Pages - or indeed any iWork application, I select 'normal' print quality and 'plain' paper, but the printer refuses to print in anything other than 'high quality'. Even if I choose 'draft' quality, the printer prints high quality. I print lots of reports and never need 'high quality' besides which it takes 4 times longer to print and uses twice as much ink (and looks dreadful on the paper I use).
Now here is the even odder thing, the printer prints as directed to Office 08, Mail, Safari and Text Edit. But I have the same problem of it ignoring my printing options in iPhoto and iCal. It also works fine from my wife's PC.
HP has been truly hopeless in trying to sort out the problem. I have reinstalled the drivers many times and cleared out all kinds of files as directed by them. The problem originated in November last year when I upgraded to Leopard.
I have installed the following drivers as directed by HP: HPInstaller_OJPK5400v9.7.1, HP v9.7Inkjet OS X 10.5 Update.
Hope someone out there can help.

Perhaps I should invest in another inkjet printer. Are you saying I should avoid HP and Epson? In which case how about Canon? Would that work or are there others you could recommend.
Good question. IMHO there is no reason to reject any particular make and model of inkjet, but there is also no reason to suppose that the supplier will support that make and model beyond its short lifetime which is sort of supposed to be the lifetime of the version of the operating system for which the 'dumb' raster driver was developed. It's just the way it is, unfortunately.
One should purchase the type of printer product that suits one's purpose. For proofing of copy a black and (single colourant) grayscale laser is superior to an inkjet. For proofing of photographs a colour inkjet which is correctly calibrated, correctly characterised, and for which colourants are correctly converted in the colour correction software and pagination software can hit within 1-2 dE of the print on a press operated with automatic colour control.
Sorry to be so unhelpful, but there are four printers and shelves of software here, and it's not simple, unfortunately.
hh

Printing problem with cc and cs6 with epson 7890

Hi everyone,
I am having a serious printing problem. I use CC (14.2.1) and CS 6 (13.0.6) on Mavericks 10.9.1 on an iMac. If I try to make a print on a 24" roll I get an error message: cupsRasterinterpretPDD has an error = page header unsupported values. If I print A2 or A3 sheets everything works fine.
I contacted Epson because I thought it was a printer problem, but they insist it is a photoshop problem. I updated to the latest printerdriver.
Does anyone have any ideas or even better a solution?

I feel your pain, but I don't know the solution, sorry. Our Mac guru who primarily serves designers is not upgrading any of his clients to Mavericks so far, due to printing (and other) issues. Se we're still on 10.8.4 here.
This might help: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03967522
Or this: https://discussions.apple.com/thread/5546441
If those don't help, you might want to post your issue in the Apple Support Communities: https://discussions.apple.com/index.jspa
Good luck. :+)

Printing Problem with labels and envelopes

I have Microsoft office:mc 2004 and cannot print labels and envelopes. Whenever I ask to print it boots out and states that there is a problem and ask me to report the problem. I have reported it 20 times in the last 2 days with no response from apple. Can anyone give me any input on how to correct this problem? I have a HP laserJet 3050 all in one printer and did not have these problems when I was using a PC with windows. Please help as I am at my last of my patience on this problem. Thanks and please use language I can understand as I am not computer literate on all of the lingo that is being used.

Hi Lilmac, and a warm welcome to the forums!
Have you installed a Printer Driver later than the one that comes on the CD? hp generally includes older ones.
Tough to say with so little to go on, but since it could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.

Printing problems with Elements and iPhoto on OSX 10.5.7

I am having problems with printing photos on my printer (Canon iP4000) since getting the new iMac with OSX (10.5.7) and using Photoshop Elements 6 and iPhoto. The Canon printer driver (and all my other data) were copied to my Mac by the techs at the Apple store from which I purchased the iMac. (I previously had a Mac G4 with OSX 10.4.11 Panther.)
Photos that used to come out crystal clear and brilliant on the printer from the G4, now are faint with kind of a white veil. When I try to print in Elements, I get a message that says "Some PostScript specific print settings (Interpolation, Calibration, Encoding) will be ignored since you are printing to a non-PostScript printer." I really have no idea what that means. Anybody?
Text printing comes out fine, both from word processing documents and web pages. I am using the latest printer driver (4.8.3) for the iP4000 (probably 4 years old or so), and there are no new driver downloads available for it. I trashed the Canon software/drivers and reinstalled, to no avail.
Canon Support has been helpful and have made many suggestions, but none has worked. I tried printing with Canon's EasyPhotoPrint app, and the photos print fine. So the problem appears to be a compatibility of the printer with Elements 6 and iPhoto.
Has anyone else had this experience? Does anyone have an opinion if this means I need to get a new printer? If so, any suggestions on a good, moderately priced one for Leopard on the iMac that will definitely work with Elements 6 and iPhoto?

The v4.8.3 driver she has is the latest version Canon has supplied.
Given the driver is working okay from some other applications, there has to be something amiss with the colour management of iPhoto and PSE6.
For iPhoto, as a test I would suggest the Color Options > Color Correction is set to None to see how this impacts the printed image. Then I would try the BJ Standard and ColrSync settings to see how the output is affected.
During the Color Options trial, ensure the Quality & Media > Media Type is set to the appropriate paper type, such as Photo Paper and the Print Mode be set to Top Quality Photo. With regards to the Media Type setting, some of the paper stocks have a profile associated with them. If you use Photo paper but use the Plain setting, then you will get a washed out print.
Pahu

Printing problem in cs5 and imac 27

I have been running my Epson Stylus Pro 4800 on a macbook pro and cs3, for a couple of years with no problems whatsoever. I have now upgraded to a new iMac 27"and have had nothing but problems with the 4800. I have made my own profils and used Epson paper profiles but the prints are not as colourful as they used and totally wrong as well. I am also getting totally oversized prints compared to what image seize in ps is set to be.....for example, I have been doing a 10x21 test picture on Premium Lustre paper (photoshop is managing the colours through CS5, but it is printing the image at least 1,5 the size that it should be. All my settings are correct, dpi is 300, I'm printing at 1440dpi resolution on the correct profiles for the paper. I am at a loss to understand why this is happening. Is anyone able to assist me?
I can do the printing in preview and that is looking quite ok. But trough photoshop it is bad colors and wrong size on the print.
Regards Ulfja

I saw you're having a printing problem with CS5 while using an Epson printer. I'm having a problem too. Read my situation and see if you think it's similiar to yours. I posted this about an hour ago but have not heard from anyone yet.
I'm having problems getting good prints when using Photoshop CS5 with my Epson Photo R2880 printer, problems I never had with CS4. Here's the situation:
If I take a PSD file and print it using CS4, everything works out perfectly. But if I take that same PSD file and print it out using CS5, the print is now offset top to bottom, as well as left to right, along with a 1/8" black strip being printed down the right edge of the paper. As far as I can tell, everything is set the same.
I've compared all the print information found in the Print dialog summary box between CS4 and CS5 and everything appears to be the same. I've verified that I'm using the latest print driver with my printer, and I am. It's 8.27. I've verified that I've checked off the box to center the print to the paper, each time I've made a print. And in trying to figure out what's going on, I've discovered that this problem occurs with any paper size when using CS5, but not with CS4.
I'm stumped and frustrated and without any more ideas as to what I should do next, except to always print my projects using CS4. If anyone has an idea for me, please let me know!
I'm sorry I don't have any suggestions for you. The colors I'm getting in my prints from CS5 seem to be alright, but not the positioning on paper. It keeps offsetting and running a black stripe down one side. Fortunately I have CS4 on my computer that I can use to print from, but it shouldn't be this way.
Good luck!

Printing problems with CS5 and Epson Photo R2880 printer

I'm having problems getting good prints when using Photoshop CS5 with my Epson Photo R2880 printer, problems I never had with CS4. Here's the situation:
If I take a PSD file and print it using CS4, everything works out perfectly. But if I take that same PSD file and print it out using CS5, the print is now offset top to bottom, as well as left to right, along with a 1/8" black strip being printed down the right edge of the paper. As far as I can tell, everything is set the same.
I've compared all the print information found in the Print dialog summary box between CS4 and CS5 and everything appears to be the same. I've verified that I'm using the latest print driver with my printer, and I am. It's 8.27. I've verified that I've checked off the box to center the print to the paper, each time I've made a print. And in trying to figure out what's going on, I've discovered that this problem occurs with any paper size when using CS5, but not with CS4.
I'm stumped and frustrated and without any more ideas as to what I should do next, except to always print my projects using CS4. If anyone has an idea for me, please let me know! Thanks!
P.s. I'm new at using this forum, and though I thought I sent this out once already, I never saw it posted. If I'm in error and it's already out there, sorry for the mistake and posting it twice.

>"Unfortunately then I'd have to say all bets are off. The only true test is to print with the standard materials that Epson has designed their printer for. Only if that works well should you be trying third-party materials. For example, third-party inks in general are of poorer quality, are inconsistent, clog more, and in the long run, do not save you anywhere the amount of money they advertise over the genuine Epson products."
Getting very nice results with an R1800, Inkjetfly CIS, and Red River paper. The R1800 has never had Epson ink run through it and has no abnormal clogging problems. In fact, clogs are rare.
Getting near perfect matches to the monitor with both Colorvision and x-rite calibrating/profiling equipment. The printer stays on 24-7 so the only ink used, other than printing, is a periodic nozzle check. I am not alone in this, so blanket statements like the above are specious at best.
And no, I don't sell prints for big bux, so whether they are going to last a hundred years is not a concern. Besides, until someone is around long enough to verify those claims, the jury is out. I've got color prints from the wet days that are fading after 20+ years. Third party inks are not necessarily lower quality than OEM. One of the reasons for the development of high quality third party inks was the dissatisfaction of B&W and fine art printers with the OEM products.
Of course the cheap refilled/knockoff carts being hawked on ebay and the like are a different story.
MBP, OS 10.4.11, CS3 10.0.1, R1800 with latest driver

Printing problems with CP1515n and CM1312

I can see from the forum that a lot of people are having problems with printing. My HP CP1515n wouldn't print properly with my new iMAC. Through a lot of complaining to PC World and to Apple we got a resolve with PC world. However my HP CM1312 printer doesn't print correctly the blue colour and makes it mauve. Surely Apple should have got this problem sorted out prior to releasing the new Macs?

Can I just ask what was the resolve you got for your CP1515n printer? I cannot use mine after installing Snow Leopard

Image printing problem with Photoshop and Lightroom specifically with 11X14 cuts off top of image and moves bottom border up. Windows 7 OS - Epson Printer is working properly.

Have an unprecedented problem with printing 11X14 photos in both PS and Lightroom. The printer is operataing properly. Printing 81/2X11 correctly. Have double and triple checked all the printing settings and they are correct. Have checked with friends to no avail. This problem started yesterday. Widows 7 OS. Need help.

You show the OS receiving an image from Photoshop, and the OS starting the Epson print driver and handing it part of the image, the driver connects to the printer, then the print driver fails. It looks like a bug in the Epson rasterizer, or the printer communication.
You really need to talk to Epson. Photoshop isn't involved in that error.

Printing problems with acrobat and Mavericks

We just got a new Mac Mini to replace an old iMac to drive our printers. We normally print from Acrobat Pro 9 ( 10.6.8 & 10.8.5 ) and have no problems. We migrated everything over to the Mini, which is running Mavericks, and now when we print a 2 page document the 2nd page is printing 180 degrees turned around. Printed the same file from another Mac with no problems. I've heard that Mavericks will only run Acrobat Pro XI. This is insane, that's like $450! Could it be a driver or something simple that I can't see for the life of me? BTW, this Mini will be running 10 printers at once, the old one did it.

Have you reset the printing system…
http://support.apple.com/kb/PH14141
Does Preview do any better? That will indicate if it's the printer driver or something in the application's printing system.
It would be worth checking that the printer drivers are up to date - a migrated driver may not be appropriate for 10.9.

Safari pdf printing problem- adding spaces and characters to doc

when I print some pdf documents, spaces and charactors are added. the document looks fine on the screen and prints fine directly from Adobe Reader. the problem is with Safari and Adobe plugin. same results on 10.4 and 10.3 machines. do not have this problem printing from Firefox. any suggestions
thanks, david
G4 Mac OS X (10.4.5)

Hi,
I would appreciate any comments.
Thanks

Printing Problems with CS3 and Epson R1800

Recently upgraded to CS3 and have now lost most printing options for Epson Stylus Photo R1800. Had no problems with CS2 running in Leopard. Anyone know what has happened?

>"Unfortunately then I'd have to say all bets are off. The only true test is to print with the standard materials that Epson has designed their printer for. Only if that works well should you be trying third-party materials. For example, third-party inks in general are of poorer quality, are inconsistent, clog more, and in the long run, do not save you anywhere the amount of money they advertise over the genuine Epson products."
Getting very nice results with an R1800, Inkjetfly CIS, and Red River paper. The R1800 has never had Epson ink run through it and has no abnormal clogging problems. In fact, clogs are rare.
Getting near perfect matches to the monitor with both Colorvision and x-rite calibrating/profiling equipment. The printer stays on 24-7 so the only ink used, other than printing, is a periodic nozzle check. I am not alone in this, so blanket statements like the above are specious at best.
And no, I don't sell prints for big bux, so whether they are going to last a hundred years is not a concern. Besides, until someone is around long enough to verify those claims, the jury is out. I've got color prints from the wet days that are fading after 20+ years. Third party inks are not necessarily lower quality than OEM. One of the reasons for the development of high quality third party inks was the dissatisfaction of B&W and fine art printers with the OEM products.
Of course the cheap refilled/knockoff carts being hawked on ebay and the like are a different story.
MBP, OS 10.4.11, CS3 10.0.1, R1800 with latest driver

Printing Problem in Mail and PDF

Whenever I open a Mail or PDF then choose print, the loading icon keep loading and loading... till 5-10 mins.and slow down other application. I never have this problem untill i installed OSX10.5.2. no matter I updated my adobe acrobat. IT's serious problem. Apple please get me 10.5.3 to fix the problem !!!

Apple suggested us to lower the image to print more faster. But my mail contains text only and still loading for few minutes.. How to fix? Apple get me help!!!!

Default Printer Problem - Epson 9800 and 9900

OK. I attended the Epson Academy meeting in Chicago yesterday - -and I learned several new things.
None of the Epson speakers, however, ever heard about an issue that is my problem:
Blacks are blocking up on my 9800 used with MK. I am printing on Somerset Velvet for Epson.
I am using an Intel MacPro with OS 10.5.6 - and Photoshop CS4. I have a new Epson 9900 on a USB line - and my old 9800 on a Firewire connection.
I posted earlier that my 9800 is now dedicated as an MK printer (I gave my 9600 to an art department).
My new 9900 is designated as the DEFAULT printer - on the MacPro with OS 10.5.6 - and Photoshop CS4.
When I send a print to the 9800 (not designated as the default printer) - it appears to ignore my profiles - and prints huge BLACK areas where there should be detail - and some grays.
I sent the same file to my 9900 - after switching it to MK from PK - and the print was perfect - matched my profiled monitor exactly - and was the same as a previous print done with MK on the 9600.
So - today I am back in the studio and doing some research - and some experiments (putting my science Ph.D to work).
At the suggestion of Epson's people yesterday, I reloaded the print driver (from Epson) for the 9800.
I then Used Print-Fax (on the Mac - system preferences) to delete the 9800 from my list - and then re-added it (it is on a firewire link).
I made another print - and (drum roll...) it is still filled with Blocked-Up Blacks.
And so, I did the test that I mentioned doing earlier here:
I went back to Print-Fax - and I designated the 9800 as the DEFAULT printer.
I then made another print and (more drum rolls.....) - the print is PERFECT - matches the print from my old 9600 and the new 9900 with MK.
So - the problem is that under OS 10.5.6 - and with an Intel MacPro - and with Photoshop CS4 - the 9800 MUST BE SELECTED AS THE DEFAULT PRINTER.
My next test is to send the same file to my 9900 - with MK - with the 9900 NOT designated as the default (leaving the 9800 in that role).
I want to be able to have both printers working (as in actually printing) at the same time so that I can keep up with Fine Art and canvas jobs.
Will I have to switch the Default-Designated Printer for each job ? What will happen if I de-select the 9800 while it is printing???
Stay tuned.
In my former life, as a professor, I could apply for federal grants to do my research. Maybe I should send a bill to someone for ink, paper, and time.
There is a problem here- but it could be Epson, Apple, or Adobe at this point.
Dick Sjolund
http://www.wilderness-studio.com

Jeff,
My sincere apologies -- I asked John Caponigro - who sent me over to Andrew - and we sat and talked right next to you ... maybe I needed a few minutes at the end of the meeting for more Qs. and As.
So - now that we know there really IS a problem -- how do we fix it???
What will happen if I am sending a job to the 9800 - with MK - designated as my default printer - and then, at the same time - send a job to the 9900 - but now select it as the default printer in the middle of the 9800's job?
Any chance that OS 10.5.7 will fix this - or do we wait and start-over with 10.6 (Snow Leopard)?
It was a great Epson session in Chicago - you were terrific - and I'm not at all surprised to learn that you knew the answer.
Dick
And - this just in ----
With the 9800 Epson designated as the DEFAULT printer, I sent a job to the 9900 (now no longer the default) - and (even more drum rolls....) the print is perfect.
So - it appears to be an EPSON - APPLE problem specific to the 9800 (in my case).
If you have more than one printer - test the problem by changing the DEFAULT status around in Print-Fax.
And - thanks, again, Jeff.
Dick Sjolund
http://www.wilderness-studio.com

Printing problem with InDesign and Acrobat

I've just purchased Adobe Creative Suite 3 but cannot print A4 or A3 landscape from inDesign3 or Acrobat to either the Aculaser2600 or SytlusPro 3800. Illustrator and Photoshop has no problem. It prints but in the corresponding portrait print area
Any suggestions

Yes, post your question in an Adobe discussion group, and not an Apple group.
-Dennis

Printing Problems GI Slip and GR Slip

Similar Messages

Maybe you are looking for