Printing problems with 10.6.7 from Pages

I have a Pages Template which I have been using for years but which has started printing differently since the recent 10.6.7 release of OS X was installed and updated. I am not sure if this is related to the OpenType Fonts mess up that was recently fixed, but the Template uses Helvetica. I am using the most up to date version of iWork 09, Pages v4.05 on Mac OS X (10.6.7) and Software Update tells me my software is fully up to date.
The document is 6 pages long, and I want to print it double sided with the first page on Letterhead paper and the rest on plain. In the past our Ricoh Aficio MP C2800 did this without a problem, but no longer.
When I print the first page only, that single page correctly appears on Letterhead paper; if i print the whole document, the Letterhead paper is moved to page 2 instead of Page 1. The text that should appear on the Letterhead page still appears on Page 1, but with no Letterhead showing.
Any ideas of where I should look?
TIA

I see that there was a driver update for your printer in late January. Did you install that update?
Jerry

Similar Messages

Printing problem with my web pages

Hi all-
I noticed a funny problem with one of my web pages. When I go to print, it only prints one page length of a webpage that should be two pages long (assuming you choose the shrink width to fit one page wide option in your print command).
I post messages with training schedules and people sometimes want to print the page, I'm not looking for pdf or anything, just a simple print the whole web page. When I print, the second half of the webpage comes out blank. I tried saving at a pdf from the print window, and the same thing happens.
The page I'm trying to print out is at:
http://web.mac.com/gdefrancis/FSNordic/FSTeam_News/Entries/2008/12/22_JNT_Holiday_Training_and_PracticeSchedule.html
Note that is stops printing (or leaves a pdf converted from the webpage blank) after the 12.21 entry.
any suggestions?
thanks!
Greg

Greg ~ On a now archived thread, you wrote:
I would love people to look at my various sites and let me know what you think!
Looking at your Nordic Ski site, it occurred to me that it could benefit from some Social Networking features. Take a look at this site:
http://my.steamboat.com
...built with this free, web-based tool:
http://www.ning.com
Each Network's "look" is fully customizable — click on the thumbnail for their product overview:

Problem with access to SipFactory from jsp-pages in JBoss environment

Hello!
I have an installation of the OCMS 10.1.3.3. deployed into a JBoss (jboss-4.0.5.GA) environment. Unfortunately I have a problem with accessing the SipFactory from a jps-page. Encouraged by the "messagesender" example I tried to get an instance of SipFactory from my jsp-page simply by calling:
SipFactory sipFactory = (SipFactory) application.getAttribute(SipServlet.SIP_FACTORY);
But unfortunately there seems to be no attribute "SipServlet.SIP_FACTORY" and I only get a null pointer. I have also tried running that code in the orignal messagesender example but it didn't work either. So I wonder if this should definetely work in a JBoss environment or if this might be a known problem. Is there anything that I could check/do regarding this problem? I suppose there must be an oracle module which should take care of making the SipFactory availabe after it is deployed. Perhaps something went wrong during the deployment?!
Best regards,
Tim

Hi
On JBoss, OCMS does not support converge applications.
I.e the SipFactory can be retrieved from the servlet context when running on OC4J.
Instead the SipFactory can be found in JNDI as described in the Developer's Guide:
"External Access to SIP Servlets
To enable convergent applications between SIP and HTTP, the OCMS Container allows you to get access to the javax.servlet.sip.SipFactory by looking it up through JNDI. The SIP Factory will be registered under the same name as the display name of your SIP servlet as illustrated in Example 2–12. The <display-name> in the sip.xml in this case must be "My sip app".
Example 2–12 Accessing the Data for a SIP Session through JNDI
InitialContext ic = new InitialContext();
SipFactory sipFactory = (SipFactory)ic.lookup("sip/My sip app");"
Cheers
Lucas Persson

Printing Problems with PDF - Adobe Acrobat

Printer - HP Deskjet 3070A
Laptop - Asus Zenbook running Windows 7 Home Premium
Issue: Printing problems with PDF (Adobe Acrobat Reader)
Dear All,
Please help!
My printer was working absolutely perfectly until my brother in law recently needed to borrow my printer. He plugged in his laptop running Windows 8 (awful thing that is). Since he did this to print his own PDF, I cannot print mine.
Although all the text will appear on the page perfectly both in the document view and on actual printing, it appears that some of the transparent formatting stuff on a PDF - such as boxes you have to fill in and transparent areas (such as you find on glorious tax forms) are omitted completely. In fact, in their place I was getting a single black dot. Now, after uninstalling and re-installing updates for the printer, windows 7, adobe acrobat reader, etc.etc. I get squat. Just all the text laid out but none of the shading or boxes.
I have tried fiddling with the printer settings; the print as 'photo' option, dpi settings, greyscale - as much as I can think of and I am thoroughly stumped.
In a desperate attempt, I even installed the Universal Printer Drivers - thinking it might have been that. No. All I got was a page of gobbledygook. Consequently, I uninstalled and reinstalled the normal drivers again.
If there are any wonderful people out there with any fabulous ideas about how I can get my shading and boxes back; I'd very much appreciate it. Sadly I have a tax return to fill out (which is already fabulously late) and need my printer to work!
Much appreciation in advance x

Hey there @Reverie!
Thanks for posting on the HP Forums!
I can see that the printer is no longer printing in the correct format after it was plugged into the Windows 8 computer! You mentioned you have run the updates and uninstalled/re-installed the printer software. Have you uninstalled and re-installed the Adobe software? Are you getting the same issue from other programs as well? Are you getting the same issues if you are logged in as a different user on the computer?
I have located the HP Update Software Utility that may be able to help. You can download an run the utility. It may be able to locate any other updates for the printer.
I would also recommend running a disk cleanup on the computer to clear any temporary files and junk files that may be causing some performance or software issues. If you do not know how to run a disk cleanup on the computer please follow this document regarding Delete files using Disk Cleanup. It is recommended to restart the computer after a disk cleanup. After the restart try the print job again!
Let me know if that helped and thanks again for posting on the HP Forums!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Default printer problems with adobe 10.1.2

I was having problems printing PDFs since upgrading to 10.1.2. After reading and trying many recommendations, I happened to notice that my default printer(I have only one printer) was listed twice on the print window. The first (default) printer is spelled "HP PSC 2350 series" (upper case 'PSC') The second is "HP psc 2350 series" (lower case 'psc') . The printer is named 'HP psc 2350 series' in my printers and devices, and if I select this printer, the page will print perfectly. Now that I have solved my printing issue, I would like to change the default setting on the adobe print window to come up as the active link, so I don't have to continue to select a different printer everytime I wish to print a document. The printer by the lower case "psc" name is set as the default printer in printers and devices, and I cannot figure out why it doesn't come up as the default printer on the adobe reader print window. I also cannot figure out how to change the default in the print window.   An added interesting fact is that I get no response in the print window when I try to select "preferences' or 'advanced' for the upper case 'PSC' printer.
My computer runs in Windows 7 (64-bit). The printer is HP psc 2355xi all-in-one. Any suggestions are much appreciated

I have not been able to select a different default printer for Adobe, but I can print if I manually select the correct link everytime.
Date: Tue, 6 Mar 2012 13:16:52 -0700
From: [email protected]
To: [email protected]
Subject: default printer problems with adobe 10.1.2
    Re: default printer problems with adobe 10.1.2
    created by AMG13 in Adobe Reader - View the full discussion
I am having the same issue.The correct printer is selected as the default printer on the control panel and there is no driver with the lowercase convention.However, the first printer option that appears is the lowercase convention. Is there any way to select a default printer for specifically for Adobe, as opossed to the PC itself?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4248912#4248912
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4248912#4248912. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

I had been having a similar problem on Lion with Safari pdf files despite downloading the latest Adobe Reader XI.
I would constantly get the same messages - There was an error opening this document. The file is damaged and could not be repaired. And I would get a blank page when I tried to print the pdf if I tried printing from the Safari web page using File - Print from the top toolbar on my laptop.
Then I came across the grey Safari lozenge with action icons.
This allowed me, without downloading the pdf, to print the pdf file direct from the Safari page by using the Print icon on the grey lozenge that appears centrally three quarters down the screen.
Then I discovered that if I save the pdf using the Save icon from this same grey lozenge on the Safari page I can open and print this pdf version from my desktop.
I've tested it with a couple of different pdf files and these methods work using the grey lozenge icons but the same pdfs files don't work using File - Save As on the Tool Bar.

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Printing problems with InDesign CS3 running on OS 10.6

I recently upgrade my old G4 Mac (OS 10.4) to a new Mac Mini running OS 10.6.6. I am still running CS3 and have encountered only one problem. When I print multiple copies documents from InDesign that contain several layers, each copy is processed separately, so that it can take several minutes just to send the print job to the printer if I'm printing over 20 copies. Then once the print job is processed the printer pauses between every copy, which is tripling the printing time. If I print a simpler document with only one or two layers it processes all the copies at once, as it should. I am printing on an Okidata 6150 color laser printer.
I never had this problem on my old computer. I'm wondering if this is one of the "unsupported" bugs of running CS3 on Snow Leopard. I want to make sure that this is a problem unique to running CS3 with Snow Leopard before I go ahead and upgrade to CS4 or CS5.
computer: Mac Mini core 2 duo 2.4 ghz processors, 4 gb RAM, printer: Okidata 6150 DN color laser printer.

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Printing problem with Summarize Comments?

Printing problem with Summarize Comments in Pro 10.1.6? When I print, I only get the number boxes on one page and the comments on the next page. The numbered boxes don't show up on the actual image itself.

Um I dont know if im doing something daft but I tried this like you said
PrinterJob printJob = PrinterJob.getPrinterJob();
printJob.setPrintable(this);
if(printJob.printDialog()){
try {
          PageFormat pageFormat = printJob.defaultPage();
          if (pageFormat.getOrientation() == PageFormat.PORTRAIT) {
          landscape = 0;} else {
               landscape = 1;}
          System.out.println("THE ORIENTATION IS "+ landscape);
          printJob.print(); }
catch (Exception PrinterExeption) { PrinterExeption.printStackTrace();}
and it doesnt seem to work as I tried it both as landscape and portrait in the print dialog but landscape is always 0.
cheers
pmiggy

Problem with pdf display downloaded from application server

Hi all,
I have a problem with displaying pdf downloaded from application server (saved in BINARY MODE).
I am getting the pdf output of adobe form in FPFORMOUTPUT-PDF as rawstring back to my program and then converting that rawstring into binary form using the function module SCMS_BINARY_TO_STRING.
Now, when I export the data to presentation server directly using cl_gui_frontend_services=>gui_download, the pdf is downloaded properly.
However, when I save the data to application server file by looping at the internal table obtained from SCMS_XSTRING_TO_BINARY and using TRANSFER, and subsequently downloading the file in "unconverted format" from AL11 to my desktop, I am getting a "blank" pdf file (with the same number of pages as the one downloaded using gui_download).
I have tried different encodings during download but in those cases i get corrupted pdf message. only the default option of INTIAL value seems to work.
I am forced to believe that there is a problem in my code which saves the data to app server but I cant find any solution that is logical. Any solution to this would be greatly appreciated.
Regards,
Sasi
Edited by: Sasi Upadrasta on Sep 29, 2010 7:55 PM

used a program to read the file from appl server and then downloading it to desktop.

Printing problems with InDesign CS3 with Mac OS 10.6.3

I am not new to InDesign... I have CS3... but I am brand new to Mac Snow Leopard (OS 10.6.3). Although I can open CS3 and use the application, I cannot print with it. None of my other applications has printing issues... just CS3. Any suggestions?
Richard

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

Cisco ASA 5505 - problem with negotiating IP address from PPPoE

Hi all,
I have problem with negotiating IP address from PPPoE. There is following design: ISP providing vDSL ending on VDSL modem in bridge mode. Behind brigde modem is ASA 5505 terminting PPPoE on OUTSIDE. Everything works fine except negotiating IP address from PPPoE server.
I have configured ASA 5505 with (ASA Version 9.2(2)4) for PPPoE like this [1.]. But If i try to "show" IP address on OUTSIDE interface a get this [2.], ok strange but let's continue. If list "show vpdn pppinterface id 1" i get this [3.]. Seems that I got public IP addres what was right, but this IP address was not associated with interface OUTSIDE?
Well, if I set IP address manually like this [4.] and also set a default route everything works fine but what will happen when ISP change reservation for my IP address or default gateway.
I have tried different version of ASA OS like 8.4, 9.1 but without luck.
Can anybody help me. Thanks a lot.
Regards
Karel
[1.]
interface Vlan100
description >>VLAN pro pripojeni do internetu<<
nameif OUTSIDE
security-level 0
pppoe client vpdn group O2
ip address pppoe setroute
vpdn group O2 request dialout pppoe
vpdn group O2 localname O2
vpdn group O2 ppp authentication chap
vpdn username O2 password *****
interface Ethernet0/0
description >>uplink O2 vDSL<<
switchport access vlan 100
[2.]
ciscoasa(config-if)# show ip address vlan 100 pppoe
ciscoasa(config-if)# 0.0.0.0 255.255.255.255 on Interface: OUTSIDE
ciscoasa(config-if)# show interface vlan 100 detail
Interface Vlan2 "OUTSIDE", is up, line protocol is up
Hardware is EtherSVI, BW 100 Mbps, DLY 100 usec
        Description: >>VLAN pro pripojeni do internetu<<
        MAC address f44e.05d0.6c17, MTU 1492
        IP address unassigned
Traffic Statistics for "OUTSIDE":
        28 packets input, 1307 bytes
        31 packets output, 721 bytes
        0 packets dropped
      1 minute input rate 0 pkts/sec, 3 bytes/sec
      1 minute output rate 0 pkts/sec, 1 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Control Point Interface States:
        Interface number is 15
        Interface config status is active
        Interface state is active
[3.]
ciscoasa(config-if)# show vpdn pppinterface id 1
PPP virtual interface id = 1
PPP authentication protocol is CHAP
Server ip address is 88.103.200.41
Our ip address is 85.71.188.158
Transmitted Pkts: 20, Received Pkts: 16, Error Pkts: 0
MPPE key strength is None
MPPE_Encrypt_Pkts: 0, MPPE_Encrypt_Bytes: 0
MPPE_Decrypt_Pkts: 0, MPPE_Decrypt_Bytes: 0
Rcvd_Out_Of_Seq_MPPE_Pkts: 0
ciscoasa(config-if)# show vpdn session state
%No active L2TP tunnels
%No active PPTP tunnels
PPPoE Session Information (Total tunnels=1 sessions=1)
SessID TunID Intf     State       Last Chg
22298      2 OUTSIDE SESSION_UP 561 secs
[4.]
interface Vlan100
description >>VLAN pro pripojeni do internetu<<
nameif OUTSIDE
security-level 0
pppoe client vpdn group O2
ip address 85.71.188.158 255.255.255.255 pppoe setroute
route OUTSIDE 0.0.0.0 0.0.0.0 88.103.200.41 1

You're right that the ACL should not affect otherwise allowed communications to the interface address.
Try disabling the ip audit feature on your outside interface.
no ip audit interface OUTSIDE AP_OUTSIDE_INFO
no ip audit interface OUTSIDE AP_OUTSIDE_ATTACK

After update 8.1.2 i had problem with sync my content from ITunes with IPod

After update 8.1.2 i had problem with sync my content from ITunes with IPod. It stucks on moment when its waiting for implementing changes (step 5 of 5) Hours and hours i'm waiting but still the same. So i cant use my Ipod at all. I restarted Ipod and delete and download Itunes again. Still stuck in the same moment. Help please. Someone has some problems like that?

I have an error message saying that "An unknown error occurred (-54)"

Printing problems with 10.6.7 from Pages

Similar Messages

Maybe you are looking for