Printing problems with CS5 to Xerox C320 Laser

Hi There,
I have recently upgraded from CS4 Windows to a new iMac with CS5. I was getting good prints out of the PC although when we switched to Mac CS5 I have been getting de saturated prints, no colour concistancy across progams and it is near impossible to colour callibrate.
I have double checked that I am using the correct driver for the Xerox C320 Document Centre, I have experimented with changing colour profiles. I just can't get a good colour out of any of the applications. Illustrator is the worst. The prints are coming out nothing like when they show on screen. I am really confused as all of the IT experts we have consulted with had advised us that printing on the Mac would produce a better print that the PC although this is not the case.
If anyone has any ideas of how to fix this problem it would be greately appreciated.
Thank you,

Hi There,
Thanks you for your response.
I use a Spyder 3 to callibrate my screen and I have had Syder experts in to show me how to callibrate the paper so we can set up profiles. This worked a little bit. It meant that I could see how de-saturated the print would come out. This didn't help the print quality at all.
Thank you for your advice. I will definantly look into some alternative devices.

Similar Messages

Printing issues CS5 to Xerox C320 Laser

Hi There,
I have recently upgraded from CS4 Windows to a new iMac with CS5. I was getting good prints out of the PC although when we switched to Mac CS5 I have been getting de saturated prints, no colour concistancy across progams and it is near impossible to colour callibrate.
I have double checked that I am using the correct driver for the Xerox C320 Document Centre, I have experimented with changing colour profiles. I just can't get a good colour out of any of the applications. Illustrator is the worst. The prints are coming out nothing like when they show on screen. I am really confused as all of the IT experts we have consulted with had advised us that printing on the Mac would produce a better print that the PC although this is not the case.
If anyone has any ideas of how to fix this problem it would be greately appreciated.
Thank you,

Hi There,
Thank you for your response.
I have Bridge installed on the Mac and on the PC.
I will take your advice and have a look at how it was set up on the PC.
Thank you for the heads up about Bridge though, I was un aware you could manage colours in Bridge.
Thanks,

Printing problems with CS5 and Epson Photo R2880 printer

I'm having problems getting good prints when using Photoshop CS5 with my Epson Photo R2880 printer, problems I never had with CS4. Here's the situation:
If I take a PSD file and print it using CS4, everything works out perfectly. But if I take that same PSD file and print it out using CS5, the print is now offset top to bottom, as well as left to right, along with a 1/8" black strip being printed down the right edge of the paper. As far as I can tell, everything is set the same.
I've compared all the print information found in the Print dialog summary box between CS4 and CS5 and everything appears to be the same. I've verified that I'm using the latest print driver with my printer, and I am. It's 8.27. I've verified that I've checked off the box to center the print to the paper, each time I've made a print. And in trying to figure out what's going on, I've discovered that this problem occurs with any paper size when using CS5, but not with CS4.
I'm stumped and frustrated and without any more ideas as to what I should do next, except to always print my projects using CS4. If anyone has an idea for me, please let me know! Thanks!
P.s. I'm new at using this forum, and though I thought I sent this out once already, I never saw it posted. If I'm in error and it's already out there, sorry for the mistake and posting it twice.

>"Unfortunately then I'd have to say all bets are off. The only true test is to print with the standard materials that Epson has designed their printer for. Only if that works well should you be trying third-party materials. For example, third-party inks in general are of poorer quality, are inconsistent, clog more, and in the long run, do not save you anywhere the amount of money they advertise over the genuine Epson products."
Getting very nice results with an R1800, Inkjetfly CIS, and Red River paper. The R1800 has never had Epson ink run through it and has no abnormal clogging problems. In fact, clogs are rare.
Getting near perfect matches to the monitor with both Colorvision and x-rite calibrating/profiling equipment. The printer stays on 24-7 so the only ink used, other than printing, is a periodic nozzle check. I am not alone in this, so blanket statements like the above are specious at best.
And no, I don't sell prints for big bux, so whether they are going to last a hundred years is not a concern. Besides, until someone is around long enough to verify those claims, the jury is out. I've got color prints from the wet days that are fading after 20+ years. Third party inks are not necessarily lower quality than OEM. One of the reasons for the development of high quality third party inks was the dissatisfaction of B&W and fine art printers with the OEM products.
Of course the cheap refilled/knockoff carts being hawked on ebay and the like are a different story.
MBP, OS 10.4.11, CS3 10.0.1, R1800 with latest driver

Color printing problems with CS5 on Mac 10.6.5

I really need some help. I installed CS5 several weeks ago on a new MacPro tower. I have used an Epson 3800 pro printer for many years with my Mac G5 and CS3 with no issues at all. Now, the color is completely off. I have kept the same settings, updated the driver and all software. When I print from photoshop the colors are perfect. When I print from InDesign or Acrobat in pdf form, the colors are all wrong; not saturated enough, too light, too dark, just wrong. I have been printing just fine for years, but since the new computer and upgrade, everything is totally off. Does anybody have any ideas? I would be so grateful.
Thank you,
sharon

It may also be a Mac thing. I have some recollection that for a period of time Macs were introducing the monitor profile (which they shouldn't have) into the color management equation when printing from ID, and that has changed, either with CS5 or Snow Leopard. I'm sorry I don't recall the gory details -- I'm on Windows and thus never had to deal with it -- but there should be some discussion here on the forum if you search.

Printing problem in cs5 and imac 27

I have been running my Epson Stylus Pro 4800 on a macbook pro and cs3, for a couple of years with no problems whatsoever. I have now upgraded to a new iMac 27"and have had nothing but problems with the 4800. I have made my own profils and used Epson paper profiles but the prints are not as colourful as they used and totally wrong as well. I am also getting totally oversized prints compared to what image seize in ps is set to be.....for example, I have been doing a 10x21 test picture on Premium Lustre paper (photoshop is managing the colours through CS5, but it is printing the image at least 1,5 the size that it should be. All my settings are correct, dpi is 300, I'm printing at 1440dpi resolution on the correct profiles for the paper. I am at a loss to understand why this is happening. Is anyone able to assist me?
I can do the printing in preview and that is looking quite ok. But trough photoshop it is bad colors and wrong size on the print.
Regards Ulfja

I saw you're having a printing problem with CS5 while using an Epson printer. I'm having a problem too. Read my situation and see if you think it's similiar to yours. I posted this about an hour ago but have not heard from anyone yet.
I'm having problems getting good prints when using Photoshop CS5 with my Epson Photo R2880 printer, problems I never had with CS4. Here's the situation:
If I take a PSD file and print it using CS4, everything works out perfectly. But if I take that same PSD file and print it out using CS5, the print is now offset top to bottom, as well as left to right, along with a 1/8" black strip being printed down the right edge of the paper. As far as I can tell, everything is set the same.
I've compared all the print information found in the Print dialog summary box between CS4 and CS5 and everything appears to be the same. I've verified that I'm using the latest print driver with my printer, and I am. It's 8.27. I've verified that I've checked off the box to center the print to the paper, each time I've made a print. And in trying to figure out what's going on, I've discovered that this problem occurs with any paper size when using CS5, but not with CS4.
I'm stumped and frustrated and without any more ideas as to what I should do next, except to always print my projects using CS4. If anyone has an idea for me, please let me know!
I'm sorry I don't have any suggestions for you. The colors I'm getting in my prints from CS5 seem to be alright, but not the positioning on paper. It keeps offsetting and running a black stripe down one side. Fortunately I have CS4 on my computer that I can use to print from, but it shouldn't be this way.
Good luck!

Printing problems with InDesign CS3 running on OS 10.6

I recently upgrade my old G4 Mac (OS 10.4) to a new Mac Mini running OS 10.6.6. I am still running CS3 and have encountered only one problem. When I print multiple copies documents from InDesign that contain several layers, each copy is processed separately, so that it can take several minutes just to send the print job to the printer if I'm printing over 20 copies. Then once the print job is processed the printer pauses between every copy, which is tripling the printing time. If I print a simpler document with only one or two layers it processes all the copies at once, as it should. I am printing on an Okidata 6150 color laser printer.
I never had this problem on my old computer. I'm wondering if this is one of the "unsupported" bugs of running CS3 on Snow Leopard. I want to make sure that this is a problem unique to running CS3 with Snow Leopard before I go ahead and upgrade to CS4 or CS5.
computer: Mac Mini core 2 duo 2.4 ghz processors, 4 gb RAM, printer: Okidata 6150 DN color laser printer.

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Printing problems with hp laserjet 1018

- printing problem with my hp laserjet 1018 (no *.pdf files!), all other documents were printed
- hp photosmart premium c309 works with all file types
Windows 7 64 bit
Adobe Acrobat Pro 10.1.7
Acrobat Reader 11.0.3

Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

Printing problem with Summarize Comments?

Printing problem with Summarize Comments in Pro 10.1.6? When I print, I only get the number boxes on one page and the comments on the next page. The numbered boxes don't show up on the actual image itself.

Um I dont know if im doing something daft but I tried this like you said
PrinterJob printJob = PrinterJob.getPrinterJob();
printJob.setPrintable(this);
if(printJob.printDialog()){
try {
          PageFormat pageFormat = printJob.defaultPage();
          if (pageFormat.getOrientation() == PageFormat.PORTRAIT) {
          landscape = 0;} else {
               landscape = 1;}
          System.out.println("THE ORIENTATION IS "+ landscape);
          printJob.print(); }
catch (Exception PrinterExeption) { PrinterExeption.printStackTrace();}
and it doesnt seem to work as I tried it both as landscape and portrait in the print dialog but landscape is always 0.
cheers
pmiggy

Printer problem with AW 6.2.9

I have a recurring printer problem with both hp deskjet 5150 and Epson R220. After much work with techs at both, we have determined that it is an AW problem (v. 6.2.9) Other files print okay. I've searched through recent posts and found similiar questions, but the answers aren't specific to my problem. I gather that it involves trashing certain AW files, such as Appleworks.plist and other Appleworks prefs. It will help it I know the specific files to trash and as much detail about how to find them on the HD. I will be infinitely grateful for any help.
OSR
Mac G4 Mac OS X (10.4.6)
Mac G4 Mac OS X (10.4.6)

Welcome to Apple Discussions
You are correct that deleting the AppleWorks preferences can fix some printing problems. I'm surprised that in finding that information you didn't come across a post with the specific information or a tip to my user tip, AppleWorks has stopped working correctly, that explains which preference files ot delete.
Make sure you have the newest printer driver for each printer. Also, use Disk Utility to repair permissions after any system update or upgrade.

Printing Problems with PDF - Adobe Acrobat

Printer - HP Deskjet 3070A
Laptop - Asus Zenbook running Windows 7 Home Premium
Issue: Printing problems with PDF (Adobe Acrobat Reader)
Dear All,
Please help!
My printer was working absolutely perfectly until my brother in law recently needed to borrow my printer. He plugged in his laptop running Windows 8 (awful thing that is). Since he did this to print his own PDF, I cannot print mine.
Although all the text will appear on the page perfectly both in the document view and on actual printing, it appears that some of the transparent formatting stuff on a PDF - such as boxes you have to fill in and transparent areas (such as you find on glorious tax forms) are omitted completely. In fact, in their place I was getting a single black dot. Now, after uninstalling and re-installing updates for the printer, windows 7, adobe acrobat reader, etc.etc. I get squat. Just all the text laid out but none of the shading or boxes.
I have tried fiddling with the printer settings; the print as 'photo' option, dpi settings, greyscale - as much as I can think of and I am thoroughly stumped.
In a desperate attempt, I even installed the Universal Printer Drivers - thinking it might have been that. No. All I got was a page of gobbledygook. Consequently, I uninstalled and reinstalled the normal drivers again.
If there are any wonderful people out there with any fabulous ideas about how I can get my shading and boxes back; I'd very much appreciate it. Sadly I have a tax return to fill out (which is already fabulously late) and need my printer to work!
Much appreciation in advance x

Hey there @Reverie!
Thanks for posting on the HP Forums!
I can see that the printer is no longer printing in the correct format after it was plugged into the Windows 8 computer! You mentioned you have run the updates and uninstalled/re-installed the printer software. Have you uninstalled and re-installed the Adobe software? Are you getting the same issue from other programs as well? Are you getting the same issues if you are logged in as a different user on the computer?
I have located the HP Update Software Utility that may be able to help. You can download an run the utility. It may be able to locate any other updates for the printer.
I would also recommend running a disk cleanup on the computer to clear any temporary files and junk files that may be causing some performance or software issues. If you do not know how to run a disk cleanup on the computer please follow this document regarding Delete files using Disk Cleanup. It is recommended to restart the computer after a disk cleanup. After the restart try the print job again!
Let me know if that helped and thanks again for posting on the HP Forums!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Printing problems with InDesign CS3 with Mac OS 10.6.3

I am not new to InDesign... I have CS3... but I am brand new to Mac Snow Leopard (OS 10.6.3). Although I can open CS3 and use the application, I cannot print with it. None of my other applications has printing issues... just CS3. Any suggestions?
Richard

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Default printer problems with adobe 10.1.2

I was having problems printing PDFs since upgrading to 10.1.2. After reading and trying many recommendations, I happened to notice that my default printer(I have only one printer) was listed twice on the print window. The first (default) printer is spelled "HP PSC 2350 series" (upper case 'PSC') The second is "HP psc 2350 series" (lower case 'psc') . The printer is named 'HP psc 2350 series' in my printers and devices, and if I select this printer, the page will print perfectly. Now that I have solved my printing issue, I would like to change the default setting on the adobe print window to come up as the active link, so I don't have to continue to select a different printer everytime I wish to print a document. The printer by the lower case "psc" name is set as the default printer in printers and devices, and I cannot figure out why it doesn't come up as the default printer on the adobe reader print window. I also cannot figure out how to change the default in the print window.   An added interesting fact is that I get no response in the print window when I try to select "preferences' or 'advanced' for the upper case 'PSC' printer.
My computer runs in Windows 7 (64-bit). The printer is HP psc 2355xi all-in-one. Any suggestions are much appreciated

I have not been able to select a different default printer for Adobe, but I can print if I manually select the correct link everytime.
Date: Tue, 6 Mar 2012 13:16:52 -0700
From: [email protected]
To: [email protected]
Subject: default printer problems with adobe 10.1.2
    Re: default printer problems with adobe 10.1.2
    created by AMG13 in Adobe Reader - View the full discussion
I am having the same issue.The correct printer is selected as the default printer on the control panel and there is no driver with the lowercase convention.However, the first printer option that appears is the lowercase convention. Is there any way to select a default printer for specifically for Adobe, as opossed to the PC itself?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4248912#4248912
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4248912#4248912. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Template problem with cs5

I've transferred all my sites to cs5 (from cs4). I build all my sites with DW templates. When I bring up my pages from any site in DW cs4, I can edit them no problem. When I bring them up in cs5, all of a sudden I have the "no-edit" symbol (red circle crossed) when I try to type over any editable areas. Is there a setting that I am missing that I forgot to readjust when I loaded the files in cs5?
Thanks in advance
Jules

I think I'm talking to myself, here...
But just in case anyone has run into this problem with cs5...
I usually create editable regions with content alone (minus divs). It seems that cs5 won't allow this somehow. I do this so that my clients won't move the div and can highlight the text that they want to change without screwing up the placement of the divs or having to click on it several times in Contribute in order to highlight the text.
Example: (This one works)
      
   <div id="contentLeft">
        <table width="100%" border="0" align="left" cellpadding="5" cellspacing="0" background="images/transBack.png">
        <tr><td>
          <h1>Heading Goes Here</h1>
          <p>Lorem ipsum eum erant soleat perfecto ex, ei pro mentitum aliquando theophrastus. Quodsi lucilius adolescens nec te, alia melius dissentias id eum, eu vel atqui munere eligendi. Eu eum viris suscipit, mei iracundia persequeris necessitatibus ad, qui putent vocent comprehensam ea. Eos sumo illud fuisset ea, sit doming dolorum fierent ea. Vis rebum aperiri nonummy at, ne eam impedit persequeris accommodare.</p>
          <p>An dico veritus evertitur cum, mentitum legendos theophrastus mei ei, qui hinc timeam honestatis ad. Ut illum takimata gloriatur eam, ei nullam propriae delicata vel, has ea solum ludus. Pro solum ridens inciderint ad, te ius vocent perfecto, partiendo scripserit reformidans cum te. No fastidii scaevola maiestatis mei, percipit praesent abhorreant eam no. Ea vim nobis dolore ignota, quodsi inciderint ei vel. Velit dicam te cum, te inermis principes percipitur per, animal constituam his an.</p>
          </td></tr>
          </table>
          </div>
      
          (This one doesn't)
   <div id="contentLeft">

        <table width="100%" border="0" align="left" cellpadding="5" cellspacing="0" background="images/transBack.png">
        <tr><td>
          <h1>Heading Goes Here</h1>
          <p>Lorem ipsum eum erant soleat perfecto ex, ei pro mentitum aliquando theophrastus. Quodsi lucilius adolescens nec te, alia melius dissentias id eum, eu vel atqui munere eligendi. Eu eum viris suscipit, mei iracundia persequeris necessitatibus ad, qui putent vocent comprehensam ea. Eos sumo illud fuisset ea, sit doming dolorum fierent ea. Vis rebum aperiri nonummy at, ne eam impedit persequeris accommodare.</p>
          <p>An dico veritus evertitur cum, mentitum legendos theophrastus mei ei, qui hinc timeam honestatis ad. Ut illum takimata gloriatur eam, ei nullam propriae delicata vel, has ea solum ludus. Pro solum ridens inciderint ad, te ius vocent perfecto, partiendo scripserit reformidans cum te. No fastidii scaevola maiestatis mei, percipit praesent abhorreant eam no. Ea vim nobis dolore ignota, quodsi inciderint ei vel. Velit dicam te cum, te inermis principes percipitur per, animal constituam his an.</p>
          </td></tr>
          </table>

          </div>
Anyone else have this? Or even use this?
Message was edited by: JulesN

Xerox 7750 & 4500 laser printing problems with OS X Leopard

Since upgrading to Leopard from Tiger we have experienced a number of printing issues:
Printers rebooting each time we send a print job
Sent print jobs appearing in the print list but not printing, then printing the second time they are sent
The printer going to Pause on it's own
A single copy of a document printing, but not printing when more than one copy is specified
Our network seems OK, we are not experiencing problems file sharing or connecting to our server or the internet. The printers themselves are not that old and the have the latest firmware updates and we are using the latest Xerox drivers.
Anyone else experience anything similar?

It seems like it´s a problem with all Xerox Work Center drivers together with the 10.5.7 update.
here is the configuration of our Mac where it does not work:
Hardware-Übersicht:
Modellname: iMac
Modell-Identifizierung: iMac9,1
Prozessortyp: Intel Core 2 Duo
Prozessorgeschwindigkeit: 2.93 GHz
Anzahl der Prozessoren: 1
Gesamtzahl der Kerne: 2
L2-Cache: 6 MB
Speicher: 4 GB
Busgeschwindigkeit: 1.07 GHz
Boot-ROM-Version: IM91.008D.B08
SMC-Version (System): 1.37f3
Seriennummer (System): VM916ER40TL
Status: Inaktiv
Printserver: Lokal
Treiberversion: 10.4
Standard: Nein
URI: lpd://192.168.73.33/
PPD: Xerox WorkCentre 7328/7335/7345
PPD-Dateiversion: 1.0
PostScript-Version: (3016.103) 6
Speicher-Steckplätze:
ECC: Deaktiviert
BANK 0/DIMM0:
Größe: 2 GB
Typ: DDR3
Geschwindigkeit: 1067 MHz
Status: OK
Hersteller: 0x80AD
Teilenummer: 0x484D54313235533641465238432D47372020
Seriennummer: 0x25900F67
BANK 1/DIMM0:
Größe: 2 GB
Typ: DDR3
Geschwindigkeit: 1067 MHz
Status: OK
Hersteller: 0x80AD
Teilenummer: 0x484D54313235533641465238432D47372020
Seriennummer: 0x25100F65
Seems to be like a problem of a plugin of the Xerox drivers.
Hopefully there will be a solution soon.

Printing problems with CS5 to Xerox C320 Laser

Similar Messages

Maybe you are looking for