Printing Problems with Elements 8.0 and EXIF time data

I've been using Premiere Elements 8.0 in Windows XP Professional for a couple of years with no problems. I shoot mostly in JPEG. I've always imported my images using a card reader (the same one). About a year ago suddenly I ran into printing issues. When I imported my images and tried to print them Elements crashed just at the point where it should begin the actual printing. By chance I discovered that if I adjusted the time EXIF on the images in Elements by either hours or days, back or forward and adjusted them back to the original time/date the problem disappeared. If I had shot in RAW and edited these images there were no problems with the resultant JPEG.
I noted the discussions about Elements changing the time in the EXIF and checked for this but this hadn't happened. The EXIF in camera and in Elements were the same. I also checked this against the time settigs of the camera and they were the same. I shoot with a Nikon D300.
I backed up my images and did a complete re-format of my computer so that it was back to its ex-factory settings, re-installed Elements, restored my catalog from the backup and the problem still arose. I'm reluctant to upgrade to Elements 10 until I (hopefully) I find out if (a) anyone else has the same problem; and (b) if anyone who had it has fixed it.
Any ideas would be very welcome.

Miceal,
I am confused. Do you mean Photoshop Elements? Premiere Elements does not have a Print function. On can Export/Share, but not Print. For Photoshop Elements, you will want the PSE Forum.
Good luck,
Hunt

Similar Messages

I have some problems with element Panel Label and Message.

I have some problems with element Panel Label and Message. When I create form from VO attributes then I have Label for input text element. If I use Panel Label and Message element then I need to copy LABEL from input text element to Panel Label and Message element LABEL PROPERTY. Can I define in View object that I don't need label and want all attributes in Panel Label and Message element?
BEST REGARDS

You can simply remove the label attribute for the input text on the page.
sid

Wireless printing problems with 10.5.4 and Epson printers

Anyone else know about problems with Epson printers such as this no longer functioning wirelessly with bonjour once upgrade to 10.5.4? It appears they are not supporting this with a new driver yet?
At this time, Epson says they have no drivers for 10.5 and this specific printer but wondered if there are more general problems with 10.5.4 and bonjour with Epson or others?
Thanks
Paul
MacBook Pro Mac OS X (10.5.4) Using Epson CX11-NF printer

I have 5 computers-G4 PowerPC, two G4 12" laptops, G5 Mac Pro dual, Macbook Pro--with the older computers all running 10.4.11, the new ones 10.5.4. Until Friday, I was able to print with all of them to an Epson Stylus Photo R200 via Airport Extreme. After installing software for my new G3 iPhone on the G5 Mac Pro the printer connections on all the computers stopped working. I have so far been able to get the G4 Power PC to print, but none of the others. I have tried Bonjour, Gimp-print v.5.0.0-beta 2, cleared all the print drivers and restarted, and everything else I have been able to find on both Epson and Apple sites. The Printer Set Utility described by Epson does not exist in Leopard machines, and doesn't work for the older laptops. As soon as I select one of the printers in the "selected printer in print dialogue box" it grays out. I have set up sharing on the G4Power PC that does print, but it is not accessible--it shows up but is grayed out. There is a diamond next to the printers in the Print dialogue box in applications' menus, but it still doesn't work. It either cannot make the connection, cannot find the printer, or keeps spinning with the message that it is finishing printing (but it hasn't even started.) Again, everything worked fine until the new iPhone was added to the mix. My old iPhone didn't cause any problems. This is really a problem. Any suggestions welcome.

My iPod says there's a problem with my last purchase and every time I try to look at my history to clear the problem it says there no connection to ITunes

When I log into my acc it ammediatly says there's a problem with my last purchase and to go to my purchase history to clear it. When I hit continue its suppose to take me to the history but it just loads then says cannot connect

the itunes says that it knows that there isan ipod there, but it doesnt recognize it. I have reset the ipod, restarted my computer, and reinstalled itunes.
Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components (Apple Mobile Device Support, Apple Application Support, etc ...) and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Printing problems with Elements and iPhoto on OSX 10.5.7

I am having problems with printing photos on my printer (Canon iP4000) since getting the new iMac with OSX (10.5.7) and using Photoshop Elements 6 and iPhoto. The Canon printer driver (and all my other data) were copied to my Mac by the techs at the Apple store from which I purchased the iMac. (I previously had a Mac G4 with OSX 10.4.11 Panther.)
Photos that used to come out crystal clear and brilliant on the printer from the G4, now are faint with kind of a white veil. When I try to print in Elements, I get a message that says "Some PostScript specific print settings (Interpolation, Calibration, Encoding) will be ignored since you are printing to a non-PostScript printer." I really have no idea what that means. Anybody?
Text printing comes out fine, both from word processing documents and web pages. I am using the latest printer driver (4.8.3) for the iP4000 (probably 4 years old or so), and there are no new driver downloads available for it. I trashed the Canon software/drivers and reinstalled, to no avail.
Canon Support has been helpful and have made many suggestions, but none has worked. I tried printing with Canon's EasyPhotoPrint app, and the photos print fine. So the problem appears to be a compatibility of the printer with Elements 6 and iPhoto.
Has anyone else had this experience? Does anyone have an opinion if this means I need to get a new printer? If so, any suggestions on a good, moderately priced one for Leopard on the iMac that will definitely work with Elements 6 and iPhoto?

The v4.8.3 driver she has is the latest version Canon has supplied.
Given the driver is working okay from some other applications, there has to be something amiss with the colour management of iPhoto and PSE6.
For iPhoto, as a test I would suggest the Color Options > Color Correction is set to None to see how this impacts the printed image. Then I would try the BJ Standard and ColrSync settings to see how the output is affected.
During the Color Options trial, ensure the Quality & Media > Media Type is set to the appropriate paper type, such as Photo Paper and the Print Mode be set to Top Quality Photo. With regards to the Media Type setting, some of the paper stocks have a profile associated with them. If you use Photo paper but use the Plain setting, then you will get a washed out print.
Pahu

Printing Problems with Elements 11

I have just started with Elements 11. At first it printed ok. but when I tried to set it up with Elements to control the printer ( Epson SX400 ) I keep getting a message saying that ICC Profile is invalid, and the program will not let me print at all. My computer O/S is Windows 7, 64 bit. the Printer driver is one supplied by Epson EU to run the O/S.
I have tried returning to Printer controls settings, this has not worked. I have tried to print on a different printer (Brother HL-2250DN Laser Printer) this will not print either.
I have tried to print on my old Serif PhotoPlus program this is OK. So the problem is in my settings for Elements 11,
Do I Need to Reinstall the programme
Andy H

I would explain you the steps you need to follow if you are giving control to Photoshop Elements to manages color.
Step 1- Select your printer and then Click More Options at the bottom left of the Print window.
Step 2- No click on Color Management tab.
Step 3- Now from "Color Handling" drop down select Photoshop Elements Manages color. As you select this option "Printer Profile" drop down will become enable.
Step 4- If Image Space is sRGB then select sRGB profile from Printer Profile drop down else select Adobe RGB.
Step 5- Click On Printer Preferences button. It will open your printer's preferences dialog.
step 6- Now click on "Main" tab and then click Advanced button.
step 7- Now under "Color Management" section please select No Color Management here.
step 8- Click OK and come back to main Print dialog of Photoshop Elements. Now click Print.
Note -If you choose Photoshop Elements manages color, it is very important that you disable color management in your printer driver.Letting the application and the printer driver simultaneously manage colors during printing results in unpredictable color.
Try with above written steps I hope it would help.
Cheers !!!

Print Problems with Elements 9 for Mac

I cannot print borderless (randlos) on format 10 x 15 (or any other) on my Printer Canon PIXMA MP970. With Elements 8 for Windows there is no problem. I have tried any possible combinations of adjustements and have the lates printer driver installed.

10 x 15 cm is a standard European paper size but the choice ist not available in the paper size selection. The choices avaiIable seem to be only American. I have to define it as user defined (Benutzerdefiniert). I have contacted Canon but they have no solution for this problem. It seems that PSE 9 for Mac and Canon printer drivers don't like each other. A least the German versions. With PSE 8 for Windows everything works fine. There the standard European paper sizes and borderless printing can be selected with no problem. As mentioned in other topics rotating is although a problem. Lucky enough I have also a Windows system with PSE 8.

Printing Problem with CS 6 extended and Canon Pro 9500

My prints are no longer coming out centered. I have the "center" box checked in the CS6 print dialogue box. The prints are not centered left to right or top to bottom.
This seems to be a problem since I upgraded to CS 6 extended and or newest print driver for my Canon Pro 9500.
I believe that since I did one or both of these changes there is a border (consitst of slanted hash marks around the perimiter of the print dialogue picture) in the preview of the print.
The border segments left and right are not equal and are very uneven in width. The top and bottom borders are closer but still not even in width.
Can anyone help me with this issue?
Thanks,
Dennis

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
You will be able to continue your current conversation with PECourtejoie without inturruption.

Printing problem with Epson R290 Illustrator and inDesign

I am running CS2 on Leopard and have recently purchased an Epson R290. The first time I used it with Illustrator and InDesign it worked fine but now whenever I print anything it prints a tiny version (about a sixth of the real size) of the design in the top left corner of the page. It does this both with new documents and old ones that used to print ok.

Since I posted the message about this problem I have discovered that it can be worked around by choosing a higher quality print. ie if you choose plain paper when printing from Illustrator or InDesign the printer prints a reduced size image but if you choose Ink jet mat or glossy the print comes out fine. I don't have this problem with Photoshop but that may be that I always print high quality from that application. I don't use Appleworks Draw so don't know whether this solves the problem for that application but iWork documents print ok.

Printing problem with new Intel iMac and Indesign CS3

Hi there,
this might not be the right place to ask for, but has anybody here experienced printing problems in Indesign CS3 with Tiger?
I just installed the software and tried to print out of Indesign, but nothing. I can see on the panel that data is beeing received but no printing action. And this is just out of the new Indesing CS3.
Any suggestions?
Best
Rolf

Our office is printing fine from ID & PS CS3. This is from Intel & PPC Mac's running 10.4.9.
What is your printer and how is it configured for printing, ie USB or IP.
Also, have a look at the cups error log. You can find this via System Profiler > Software > Logs. This will show which process is failing for the spooled job. You can post it back here for more help.

Printing Problem with HP LaserJet 1022 and OS 10.4

I am having a problem printing one page of a document on my HP LaserJet 1022 with OS 10.4. All other documents seem to be printing fine, but when I try to print one particular page of a 90 page WORD doc, that page consistently comes out with a big black streak across it and it does something to the printer because all the lights start flashing.
I have powered off, unplugged, reset the printer subsystem, reinstalled the printer driver, and even tried to print on my laptop, and the same thing keeps happening. The document printed for me fine a few weeks ago.
Any suggestions on a work-around for this or a permanent solution? I really need to print this page on my printer ASAP. Thank you.

The page looks perfect in preview and as a PDF. I can't print from the PDF, however, because it shrinks the text and expands the margins ...
Something's fishy. Save as PDF should result a file that looks exactly, precisely, like what you'd get if you printed directly to your printer.
I suspect your Word document has been corrupted by a few bytes of random data that is causing your printer to go nuts. Try cutting that portion out of the document, and pasting it in a new blank document so you can incrementally isolate the damage.
This isn't going to be as easy as it sounds, because when the PostScript printer driver encounters the errant code in the Word document, it's essentially telling the printer "now, go to the top of this page, print a nasty black smudge, and then crash." You might have to cut a whole page before and after the suspected corruption. If you're lucky you might be able to cut the portion then paste it right back as "unformatted text". Try that.
BDAqua wrote:
I'm not familiar with Word,
We should all be so fortunate. Word does use the standard OS X Print dialog though.

Printing problems with HP laserJet 1320 and new Intel iMac

My new Intel iMac won't print to my HP 1320 from Eudora or from web browsers. The applications "quit unexpectedly". From Safari, nothing happens.
I can print PDF documents and Office documents with no problems. The Intel is connected to a router via Airport. The printer is connected to the router via Ethernet. My old G4 iMac prints fine (connected to router via Ethernet) as does my G4 laptop (connected via Airport).

A post from another threat that might help.
From Payson
Solution!!!
Just spent 90 minutes with some nice folks in level 1 and level 2 support.
Problem seems to be that I used migration utility to import the soul of my old machine into the new machine. When you do that, you bring along the old print system (PPC vs Intel).
I had upgraded to 10.4.5 after the migration and assumed that it would correct any problem like that, but it had not.
After a great deal of trial and error, the solution was to go to move disk/library/printers to the desktop and restart the system
Then use the the install disk 1 that came with the iMac and use the OPTIONAL INSTALLS package to reinstall the printer drivers.
Worked like a champ.
Suspect similar problem might happen for any of you with I/O drivers.

Help resolving printing problem with v10.6.8 and Canon MP780 PIXMA

Hello,
My Canon MP780 PIXMA stopped being able to print text in black some months ago and having scoured the internet for advice I've discovered that this issue is not that uncommon. This printer uses 5 ink tanks 3 of which are for single colours and two of which are for different kinds of black ink. The tank responsible for printing black text (fonts) for some reason just won't do its job.
Amongst other people's online posts I found a workaround cheat to print black text (simply change the paper setting to Photo Quality or Double Sided Photo for printing either single or duplex printing).
But this uses up too much ink and is EXTREMELY slow.
I have read of the same issue using a different series of Canon printers - and apparently those Canon laser printers just needed an updated CAPT driver.
Tasks already attempted to no avail:
- cleaning the ink nozzles via the software utility
- print test via software utility demonstrates absent gridline pattern
- taken out print head and cleaned carefully with water then left to dry naturally before replacing
- removed Microsoft Word font folders from user library location then restarted my machine (in a desperate response to some advice given in this community to someone else experiencing the same problem but with a different printer)
- opened FontBook and resolved duplicate fonts and restarted my machine (there were about 5 duplicates)
- tried printing from TextEdit and Preview to see if Apple software was behaving differently to Microsoft Word and Adobe Acrobat - but still cannot print black text
I've had this printer for about 7 years and although it's a massive machine and doesn't have built-in proper networking, it makes scanning and printing massive documents so easy - well it did before the black text problem began - so I'd love to find a true solution rather than chuck it out and buy a new printer.
I run it from a MacBook 2GHz Intel Core 2 Duo, Version 10.6.8 via USB cable.
Thanks in advance for taking the time to read this.
Simone

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
You will be able to continue your current conversation with PECourtejoie without inturruption.

Network Printing Problems with Windows 8.1 and HP 8600 Officejet Pro

I can not print or scan from my Dell 2720 after the system has gone to sleep. My printer shows as connected to my network. Most time I have to completely restart my PC to get it to work but even that doesn't correct the issue most time. I have removed and reinstalled the printer at least a dozen times and updated the drivers several times. Also another oddity - my router is a dual-band (2.4 & 5 GHz) and my printer only connects to the 2.4 GHz connection which I understand is normal but any device attempting to print must be connect to the 5GHz band or nothing will print. So essentially I have two problems. Any suggestions?

Hi @mhmost,
I would be happy to help you print to your 8600. Running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity:
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check: Checks for missing or corrupt driver files.
Device Manager: Checks for problems in Device Manager that would prevent printing.
Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match: Checks the port settings for the HP product.
Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
Print Settings: Checks and adjusts the print quality settings.
Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests: Checks the scan mechanism, drivers, and registry entries.
Source:Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor> >>>>> www.hp.com/go/tools
If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
If you see only green check marks (), the tool did not find any problems.
If you see green wrenches (), the utility identified an issue and corrected it automatically.
If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
If you see a red X (), follow the on-screen instructions to resolve the issue.
As for the frequency, you are correct, the printer will not work over the 5.0GHz frequency, only with the 2.GHz.I suggest disabling the 5.0 frequency, and running on only the 2.4.
Thanks, I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Printing problems with new Macbook Pro and Canon I9900

I would like to know why my printed output on the Canon I9900 is showing up much darker than the image shown on the screen. I have installed the latest driver from Canon and am still having this problem. I have tried the different Colorsync profiles listed for the Canon and have not seen any improvement. I am using 4x6 matte paper by Kodak and have selected the correct paper type and settings.
Macbook Pro Mac OS X (10.4.8)

Hi there,
I would like to know why my printed output on the
Canon I9900 is showing up much darker than the image
shown on the screen.
The answer to your question is simple; colour on a monitor is made differently than colour on a printed image. Monitors combine Red, Green and Blue (RGB) in a process called Additive colour while printers use Cyan, Magenta, Yellow and Black (CMYK) with a process known as Subtractive colour. The matching of what you see on the screen to what you get printed is a time consuming (and expensive) process and often subject to a users preference.
For the home user this process is often too complicated. If you accept that what you see is not what you will get then half the battle will be won. However, that doesn't mean that you cannot get good output on your printer. A number of applications give you the ability to adjust your output. You just need to experiment with a number of settings to get a 'workflow' that you prefer. If you can tell me which application you are using to print from I may be able to offer some values that will help.
Paul

Printing Problems with Elements 8.0 and EXIF time data

Similar Messages

Maybe you are looking for