Printing problems with HP Color Laserjet 1500L

Can anyone please help me with the following problem?
The printer will only do the first job. After that it refuses to print. The job stops, remains in the queue, and cannot be started.
Or…it looks as if it sends the print information to the printer – the green light of the printer flashes – but nothing further happens. The queue is empty and the job’s name even appears in the completed section.
The HP 1500L and the USB port are visible in the System Profiler. I have downloaded and installed the latest driver and did run Repair Disk Permissions.
I can only print again after I restarted or unplug and (re)plug the USB cable (not always). The cable is not faulty...but I'm going crazy.
I am new to the Mac world. The MacBook Pro being my first (and the way it looks definitely not the last--wonderful machine).
Any suggestions?

To use the OS X standard network protocols (Windows/IP printing), you must have either a postscript printer (the driver in that case is just a ppd for the OS X postscript output) OR, a driver designed to work with CUPS (CUPS driver). HP doesn't provide CUPS drivers for OS X (who knows why, since they do for linux).
You need to install foomatic and ESP ghostscript:
http://www.linuxprinting.org/macosx/foomatic/
then, install the foo2oak driver:
http://www.linuxprinting.org/showprinter.cgi?recnum=HP-Color_LaserJet1500

Similar Messages

Printing problem with HP Color Laserjet 3000 printer

I am using HP Color Laserjet 3000 printer, it is configured in SAP ECC6 with SPAD with device type "HPLJ4 : HP Laserjet 4 series PCL and access method = L: Print Locally Using LP
At HPUX level printer in configured with proper driver also.
When I print from SAP, I get following error
"Invalid option, Please refer to MAN page for valid options" as attached
Other then above line , nothing else comes
Please help,
Al Mamun

Hi,
Make a try using the device type HKSAPWIN and the access method is front end prinitng.
Also make sure that you are able to take the print out using the os(printer should be configured at os level first).
Regards,
Vamshi.

Printing to Windows HP Color Laserjet 1500L

I have just set up my macbook to print to my Lexmark E232 over my widows network. It works great.
So I followed a similar approach for my HP Color Lasejet 1500L. However when I get to the final step where you choose the actual printer Model (after slecting HP) I find the HP Color Laserjet 1500L isnt listed. I have tried some of the other ones but nothing prints.All the steps windows printing-network neiborhood-etc are fine.
Note I have insalled the driver etc for the HP Color Laserjet 1500L to work via USB and this works no probs.
I tried other in the drop down menu but couldnt find out where the driver for the Hp 1500 was located.
Any help would be appreciated.
Thanks

To use the OS X standard network protocols (Windows/IP printing), you must have either a postscript printer (the driver in that case is just a ppd for the OS X postscript output) OR, a driver designed to work with CUPS (CUPS driver). HP doesn't provide CUPS drivers for OS X (who knows why, since they do for linux).
You need to install foomatic and ESP ghostscript:
http://www.linuxprinting.org/macosx/foomatic/
then, install the foo2oak driver:
http://www.linuxprinting.org/showprinter.cgi?recnum=HP-Color_LaserJet1500

Problem with HP Color LaserJet 2840

Hey guys, first post here woot woot haha
Now to business
I have a macbook with osx 10.4.11, and an HP Color LaserJet 2840. I can't get it to print through USB.
This guy on the HP forum had the exact same problem
http://forums13.itrc.hp.com/service/forums/bizsupport/questionanswer.do?admit=10 9447627126316290000128353475&threadId=1198993
The thing is, I can't call Apple like the guy on the HP forum did. I need your help to solve my problem!!
Thanks a lot, and take care!!! ---Arthur

Hi Arthur, and a warm welcome to the forums!
Sometimes you need to habd uninstall hp drivers, but Might try these two...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html
Do this before & after any install...
Safe Boot. One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Reboot.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

Problem with hp color laserjet c1515n

I have problem with my HP color laserjet C1515n it prints in different shades printing jumps prints magenta at one place and cyan at one place and yellow at one place.....its printing is jumping.....to know the real problem it was better to attach a print copy but there is no option to send any attachment to u....kindly help to solove the issue.

Hi Arthur, and a warm welcome to the forums!
Sometimes you need to habd uninstall hp drivers, but Might try these two...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html
Do this before & after any install...
Safe Boot. One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Reboot.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

Printing Issues With HP Color Laserjet CP5520

In my office HP Color Laserjet CP5520 is installed. It is attached with network. Some of the user cannot send a print and some user can send print. IP is fixed for printer. Can anyone help me.

can anyone solve this problem

Problem with HP Color laserjet CP1515n !

Dear anyone,
My HP Color laserjet CP1515n is running wilde, because it prints every single page with black stripes on the margin. I have tryed to start the cleaning mode several times, but it does over and over again...
Please, hase anybody any experience regarding to such behaviour?...
Thanks a lot
/E

Hi - I have not seen this issue, but let me see if I can get some more information in order and try to help.
(1) Are the stripes running vertically down the page, or are they running horizontally across the page? If running horizontaly across the page, what is the distance (in millimeters) between each defect?
(2) Is the product (and cartridges) new? Did the product (and cartridges) ever work normally?
(3) Please print 5 pages that have color and then print 5 pages that only have black and white text. Do you see the defect on all 10 pages?
These types of issues are difficult to troubleshoot without seeing the defect, but maybe I can offer some help based on the answer you give.

Problem with HP color laserjet CP3505

Hi all,
I am having a Problem with my printer CP3505, i fitted this printer in my network and it is printing perfectly good at first even from my Mobie (S4) and other systems in my network, but recently a problem started its printing only from one laptop. when i send data to print either from my mobile / or from any other device the data indication on the front panel of the printer keep blinking and after some time an error appears saying cant connect to the printer.
can some one help me out.
Many thanks

Hi KKRahul, and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Printing problem with the HP LaserJet 100 color MFP M175

I have recently upgraded to Windows 8. When running Windows 7, I could print as may documents from Word or Excel as I wanted. Now, with Windows 8, I can only print one document. When I try to print another, the program freezes. The only way I can print another document is to restart the computer. Any ideas?

Hi,
Have you installed Driver and software on your Windows 8 machine ? Please download from the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=5076...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

PDF printing problems with Canon Color C3220

I'm having an issue with our Canon Color Imagerunner C3220.
When I send a PDF from Acrobat Professional 7.0 from a Mac to the
Canon I get a rule that overprints an image. The image should be
knocking out the rule. When I print from a Windows machine it
prints fine. The PDF also looks fine on screen. Our printer was
just upgraded to a C2 rip which I believe may be the culprit but am
not sure. Canon did some troubleshooting and says the problem lies
with the way the Mac interprets the PDF output going to the Canon.
These PDFs were made from InDesign CS2 and Distiller 7.0. Other
then sending from a Windows machine, does anyone have an idea for a
Mac fix?

I am seeing the same magenta cast (primarily in areas of yellow tones) when printing to an ip4000 on Photo Paper Glossy II using any of the Canon profiles (I've tried them all, one by one).

PDF Printing problems with networked HP Laserjet C5020N

Hello,
I'm having problems printing documents that I've created with the PDF creator of Office 2007. When I try to print only the first page, the printer correctly prints, but when I try any other job (printing the whole document, only the 2nd page, page 1 and 2, and so on) the printer refuses and prints one sheet that says:
Error Name: /undefined
Offending Command: --file--
Operand Stack:
I use Adobe Reader 8.1.0.

Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

Printing problems with hp laserjet 1018

- printing problem with my hp laserjet 1018 (no *.pdf files!), all other documents were printed
- hp photosmart premium c309 works with all file types
Windows 7 64 bit
Adobe Acrobat Pro 10.1.7
Acrobat Reader 11.0.3

Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

Printing problems with hp laserjet cp1515n [found problem]

Dear Arch users,
A couple of weeks ago I installed for the first time an Arch linux on my brand new Dell laptop with an UEFI MB. It took a while until I could understand how UEFI works but eventually I sort it out and got Arch installed. Unfortunatelly there are some small problems to be straiten out. One of them is the fact that printing with my laser printer (see subject line) is not working.
for the last couple of days I was searching through all post I could find around on the internet, mainly here at the Arch forum. Unfortunatelly I could not find anything nearly describing what I am living on my system. Well here is a brief description of what is happening. After installing Arch, I opted for KDE desktop environment and I made the full instalation. After installing additional software (gimp, inkskape, etc.) I needed to install my printer. At first I couldn't get permission. Than reading the Arch tutorial for CUPS, I saw that the 'lp' permission was not setup properly. Well Have done as described there. Then I tryed to install using the GUI from KDE for installing an usb printer and for my surprise there was not such an option. I intalled than de hp-toolbox, and than it was easy to install the printer. It was automatically recognized and everything was there. The problem was, when I open an archive (text, web page, doesn't matter) and send it to print, the spooler went well theoretically sent to printer and then popped up a notification saying printing finished. Opening the printing cue, I can see that the archive was still there and marked as pending. That was the point where I started to search around for potential solutions or similar solutions.
After sudying a lot I came to a conclusions that it probably have something to do with permissions. Unfortunately I could not find out where or which permissions to change in order to get something printed. I found some "debugging" and information commands and I am posting the results here;
# systemctl status cups
cups.service - CUPS Printing Service
Loaded: loaded (/usr/lib/systemd/system/cups.service; enabled)
Active: active (running) since Tue 2013-01-29 13:26:21 BRST; 4h 43min ago
Main PID: 525 (cupsd)
CGroup: name=systemd:/system/cups.service
└─525 /usr/sbin/cupsd -f
Jan 29 17:39:46 XXXX-archs hp[12186]: io/hpmud/musb.c 588: invalid usb_open: Permission denied
Jan 29 17:40:14 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:43:27 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:44:19 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:44:26 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:44:51 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:45:05 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:56:35 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:56:36 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:56:36 XXXX-archs systemd[1]: Started CUPS Printing Service.
# systemctl status cups.socket
cups.socket - CUPS Printing Service Sockets
Loaded: loaded (/usr/lib/systemd/system/cups.socket; enabled)
Active: active (running) since Tue 2013-01-29 13:26:10 BRST; 4h 45min ago# /usr/lib/cups/backend/usb
DEBUG: list_devices
DEBUG: libusb_get_device_list=10
DEBUG2: Printer found with device ID: MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8; Device URI: usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y
direct usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y "HP Color LaserJet CP1515n" "HP Color LaserJet CP1515n" "MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8;" ""
Jan 29 13:26:10 XXXX-archs systemd[1]: Starting CUPS Printing Service Sockets.
Jan 29 13:26:10 XXXX-archs systemd[1]: Listening on CUPS Printing Service Sockets.
# lsusb
Bus 001 Device 003: ID 03f0:4417 Hewlett-Packard EWS UPD
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 003 Device 004: ID 0c45:648d Microdia
Bus 004 Device 004: ID 0cf3:e004 Atheros Communications, Inc.
# /usr/lib/cups/backend/usb
DEBUG: list_devices
DEBUG: libusb_get_device_list=10
DEBUG2: Printer found with device ID: MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8; Device URI: usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y
direct usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y "HP Color LaserJet CP1515n" "HP Color LaserJet CP1515n" "MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8;" ""
# lpinfo -v
network ipps
network smb
direct hp
network socket
network http
network ipp
file cups-pdf:/
network lpd
network beh
network https
direct ptal
direct hpfax
# usb-devices
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=03f0 ProdID=4417 Rev=01.00
S: Manufacturer=Hewlett-Packard
S: Product=HP Color LaserJet CP1515n
S: SerialNumber=00BRAS85501Y
C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
The out put from the last command (usb-devices) I only copyed the relevant part from the printer in question.
the couple of last lines of CUPS error.log are;
E [29/Jan/2013:17:44:48 -0200] [Job 14] Stopping unresponsive job.
E [29/Jan/2013:17:52:25 -0200] [Client 14] Request for subdirectory "/admin/log/error_log?".
E [29/Jan/2013:17:52:41 -0200] [Client 14] Request for subdirectory "/admin/log/error_log?".
E [29/Jan/2013:18:05:47 -0200] [cups-deviced] PID 14408 (dnssd) stopped with status 1!
E [29/Jan/2013:18:16:37 -0200] [cups-deviced] PID 15151 (dnssd) stopped with status 1!
I hope somebody could help me out to find where to change permission (if necessary) or point me out to an different road.
Thanks
Last edited by camarao (2013-02-08 02:36:36)

OK here am I again.
as mentioned before I created an bogus printer with:
lpadmin -p test -v file:/dev/null
verified the presence of the printer;
lpstat -p
$ lpstat -p
printer Color_LaserJet_cp1515n disabled since Fri 01 Feb 2013 02:55:59 PM BRST -
reason unknown
printer hp930c is idle. enabled since Thu 31 Jan 2013 11:30:21 PM BRST
printer test is idle. enabled since Fri 01 Feb 2013 02:54:57 PM BRST
At first "test" printer was disabled for an uknown reason.
tried to use lpadmin -p test to enable the printer as described on the previusly mentioned web site, but couldn't get to enable printer "test". After reading alittle more on the internet I found the command cupsenable <printer> and indeed it changed the printer status.
tried to print;
echo test | lp -d test
result:
$ echo test | lp -d test
lp: Destination "test" is not accepting jobs.
I tried to change the condition of the Color laser printer but did not made any difference with the cups command.
Conclusion: how can I modify this status to make the printer accept jobs?

Unable to print with HP Color LaserJet 2605dn since Upgrading to Mavericks

Since upgrading to Mavericks, I've had nothing but problems printing to my HP Color Laserjet 2605dn.
I'm having this problem on both my iMac and my MacBook Pro.
I get errors like:
"unable to write pirnt data broken pipe"
"unable to send data to printer"
"printer not connected"
I've been reading responses to others with similiar issues and I've tried
deleting and re-adding my printer.
reseting my printing system
Installing Guenprint.
re-adding my pirnter with a generic PCL driver.
None seem to correct the problem.
This problem happens both when connected directoy with USB and when connected through the network.
I have no problem printing with my work (Wondows) laptop.
Any help would be appreciated.

Thanks, a brody.
Yesterday (before I read your response), I downloaded the latest firmware (20140413.) (What do they say about great minds?)
I thought the issue may have been resolved.
I was finally able to print my bank statement on both the iMac and MacBook.
Today, I'm back to the the same issues.
Very frustrating, even though I've had the printer for five years, I've printed less than 20,000 pages.
In my mind, it's pointing more and more towards a hardware issue.

HP Color LaserJet 1500L add windows 8.1

I can't find the driver for my printer (HP Color LaserJet 1500L) for windows 8.1.

Hi,
I afraid a such is not available, the printer is not compatible with Windows 8.1:
http://h71016.www7.hp.com/dstore/MiddleFrame.asp?page=config&ProductLineId=565&FamilyId=3294&BaseID=...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Printing problems with HP Color Laserjet 1500L

Similar Messages

Maybe you are looking for