Printing Problems with lion

Hi
I have Installed the drivers for our SHARP MX2600fn printer at work and i have configured everything the way it should be.
My mac find the printer, connects to it, and even goes through the spooling process. The printer starts to make noises like its working, but then the spooling gets to 100%, it just says finished but the printer does not print anything.
Does anyone have any ideas about this?
many thanks
Kaato.

Reading your post it sounds like your printer may not support the Postscript printer language. This can result in the print job spooling off the Mac but not being printed if you are using a Postscript driver on the Mac.
As a test you could create another printer queue to the Sharp, but this time select the Generic PCL Laser printer driver. This will only print in black and white, but if it does print then at least you know that the issue is related to the printer not supporting Postscript.

Similar Messages

  • Printing problems with Lion and Lexmark T630

    I have a Lexmark T630 b/w laser printer with USB and IP connectivity.
    With 10.6.8 I could print happily over Ethernet to the printer from iMacs (wired), mini (wired) and MBP (wireless).
    With Lion on one of the iMacs and on the MBP I can't print over Ethernet.
    The print queue shows a job 'Supply levels' in the print queue and does not print.
    The printer is activated and this job appears as soon as I select the print dialog in apps (not actually select 'Print', just opening the print dialog).
    I moved the printer to be USB connected to my Airport Extreme and get the same symptoms, except the 'Supply levels'  job prints a single line of symbols (mainly Spanish characters with some other symbols and ending in 2 smileys. It is always the same set of symbols, so I get this one line of junk on a page and then my print  job prints. Note that the T630 has *never* displayed supply levels in any version of the OS.
    The line printed is below.
    This always happens from the Lion machines and does not happen from the other iMac which is still running 10.6.8, or from a mini which is connected on another network to the network port of the printer.  The mini is also running 10.6.8.
    I have downloaded the latest Lexmark drivers from Apple and also from Lexmark (same version of driver either way) and it makes no    difference.
    I can't find anything on the Apple Support site or the Lexmark support site.
    It definitely looks like an issue with the printing system in Lion - both the phantom job and the activation of the printer as soon as a print dialog is opened.
    Anyone have a fix for this?

    The phantom print job will be a Postscript file to check the printer status. This process has been around since 10.5 but it usually is responded to silently by the printer rather than it sitting in the print queue. If you don't have the Supply Levels menu in Options & Supplies for this printer in Snow Leopard then it would suggest that Lexmark has changed the PPD for Lion.
    So you could try creating another print queue on Lion but this time selecting the Generic Postscript driver included with Lion. This should let you print but provides few options. It it does work then at least you have an easy workaround.
    Another possible fix would be copying the T630 PPD from Snow Leopard and replacing the T630 PPD in Lion. The PPD for both OS's are stored in /Library/Printers/PPDs/Contents/Resources. With the SL T630 PPD copied, you can open the CUPS web page in Lion and select to modify the T630 queue. From this page select the T630 printer and from the next page change the Adminstration drop menu to Modify Printer. You will be prompted for your Mac admin user name and password. After entering these details you see the first page showing the print queue. Select Continue and probably Continue again until you see the page where you can change the printer make and model. Here is also the section to browse for a PPD. Browse to the T630 PPD from Snow Leopard and then press Modify Printer. Now you can see if all that effort was worth it.

  • Lexmark printer problems with lion

    I have a Lexmark E460dn monochrome laser printer that worked before I got my new MacPro (Lion). The printer is in a LAN at home and an iMac on 10.6.x can still print to the printer so the printer is functioning.
    With this computer, I see the printer being looked for, then am getting an error of "Print file was not accepted" and then the printer pauses. I did a software update before I did the migration of data from an older Mac to this Mac Pro. The Lexmark drivers were updated to v 2.5. Apple support yesterday had no explanation or a fix. Still waiting for a reply from Lexmark.
    I have deleted the printer, and re-installed it, but it didn't help. I plugged the printer directly into the left ethernet port (internet is in the right jack) and it couldn't find the printer. I took out the internet in the right ethernet plug and plugged in the printer and I again got the file not accepted.
    I put the ethernet connection into the left plug and I got no ethernet available. Moving the internet back to the right jack and internet returned.
    I connected the printer via a USB connection on the printer and got the same print file not being accepted. When I plugged in the USB cord from the printer into the computer, the printer woke up, so it sensed it was just plugged in.
    My guess is that there is something wrong with the Lexmark driver update for Lion and an additional problem that I might also have a bad ethernet card that only works on one of the plugs (My old Mac had to be replaced because the only ethernet port went bad). I will call Apple support again about the bad ethernet port in the morning.

    Lexmark gave a solution that apparently Applecare or the local service center didn't know about.
    delete the old printer in the printer prefs
    create a new printer using the IP tab (not what bonjour or other source might show normally)
    enter the IP address of the printer
    (would have to change the name of the printer from the IP address to the printer name)
    Took less than a minute to get the printer working.
    Must be something about Lion that behaves differently than previous OS X versions
    I was told by local service NOT to run the DMG from lexmark for the Lion driver. The Apple update is sufficient.
    Took six days of frustrating work, but finally have new computer running normally!!!! 

  • Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

    After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
    Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
    Problem:
    - New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions. 
    - When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi. 
    - The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install). 
    Solution:
    1) Install Canon Printer Drivers and Software (from official Canon site)
    Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
    Canon 860 Series Drivers & Software  for OSX 10.8 Mountain Lion:
    The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
    1 Printer Driver
    (Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
    2 Scanner Driver
    (Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
    3 Network Tool
    (Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
    Canon Software for using advanced printing and scanning functions (while connected to network)
    4 Solution Menu
    (Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
    5 MP Navigator EX
    (Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
    6 Easy-PhotoPrint EX
    (Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
    Canon Support (HK) – check your local site
    http://www.canon.com.hk/en/download/main/index.do
    Select Product and drivers from support site eg http://support-hk.canon-asia.com/
    1. Choose a product category
    Multifunctional Printers
    2. Choose a product series
      Pixma
    3. Choose a product model
      Pixma MX868
    4. Choose type of document
    Downloads or FAQ
    If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
    2) Check Canon Printer and Software Working while connected via USB
    Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB.  Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’).  This is normally done as part of the automatic install but worth double checking
    3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
    After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
    Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
    DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list).  The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
    You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
    If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List.  It should say WLAN Active, identify the SSID and have an IP address
    If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

    Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

  • Problem with Lion 10.7.3 with hp laserjet 3600n network  printer

    Hi
    Problem with Lion 10.7.3 with hp laserjet 3600n network  printer
    Guys i am having a mad day with this new OS and some network printer none of them work with new LION,The software for this printer is currently unavaliable. Please contact the printers manufacturer for the latest software, i need the drivers for this, please give a hand with this issue
    Best Regards

    Exactly the same infuriating problem we and many others get with OS X from 10.6 on when Apple dropped Apple Talk.
    Having spent days fighting to get drivers that will run our older laser printers like HP5000, 5100, 2100, 2200 and 4MV, we came up with a simple solution:
    We use an iMac running 10.5.8 as a print server. All the 10.6 upwards Macs on the same network will see and add the printers immediately through the shared older (Apple Talk) iMac.
    Cheapest and simplest option really .... it'sannoying that a brand new Mac can no longer see existing network printers without complex investigation and trying various downloads.
    Answer is simple and cheap if you happen to own a 4 or 5 year old Mac with an OS lower than 10.6 which still has Apple Talk.

  • I HAVE PROBLEMS WITH LION 10.7.1 AND THE PRINTER EPSON STYLUS TX515FN, DOES SOMEBODY KNOW IF IT IS POSSIBLE TO BE USED?

    I HAVE PROBLEMS WITH LION 10.7.1 AND THE PRINTER EPSON STYLUS TX515FN, DOES SOMEBODY KNOW IF IT IS POSSIBLE TO BE USED?

    Yes it is, you must install the driver. Download the driver from here here:
    http://www.latin.epson.com/v4/asp/soporteDrivers.asp?idProducto=C11CA49212

  • Printing problems with hp laserjet 1018

    - printing problem with my hp laserjet 1018 (no *.pdf files!), all other documents were printed
    - hp photosmart premium c309 works with all file types
    Windows 7 64 bit
    Adobe Acrobat Pro 10.1.7
    Acrobat Reader 11.0.3

    Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

  • HP Officejet Pro 8500 prints slow with Lion.  One page every 1.5 to 2 min.  Apple support offered no help and HP unable to help. Any suggestions?

    HP Officejet Pro 8500 Wireless prints slow with lion. One page every 1.5 to 2 min.  Apple support and HP no help.  Any suggestions?

    Although printer is wireless capable I have it connected directly to iMac via USB to help with speed.  I just completed resetting printer and reinstalling to no avail, still approx 2 min to print one page.

  • Printing problems with InDesign CS3 running on OS 10.6

    I recently upgrade my old G4 Mac (OS 10.4) to a new Mac Mini running OS 10.6.6. I am still running CS3 and have encountered only one problem. When I print multiple copies documents from InDesign that contain several layers, each copy is processed separately, so that it can take several minutes just to send the print job to the printer if I'm printing over 20 copies. Then once the print job is processed the printer pauses between every copy, which is tripling the printing time. If I print a simpler document with only one or two layers it processes all the copies at once, as it should. I am printing on an Okidata 6150 color laser printer.
    I never had this problem on my old computer. I'm wondering if this is one of the "unsupported" bugs of running CS3 on Snow Leopard. I want to make sure that this is a problem unique to running CS3 with Snow Leopard before I go ahead and upgrade to CS4 or CS5.
    computer: Mac Mini core 2 duo 2.4 ghz processors, 4 gb RAM, printer: Okidata 6150 DN color laser printer.

    Hi again Peter
    It is version 5.0.4.  I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
    I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0.  I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it.  Then, when I got my new computer, I decided it was time to use the newer version.  However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader.  I contacted Adobe, and they sent me a patch which fixed it.  I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
    Richard
    Date: Tue, 15 Jun 2010 20:10:13 -0600
    From: [email protected]
    To: [email protected]
    Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
    I neglected to ask what version of indesign CS3 you are using. I also 
    notice that Mac OSX 10.6.4 has just been released. It actually 
    addresses some CS3-specific issues, though they seem to be related to 
    launching the apps, not printing. It may be worth trying to update, 
    nonetheless.
    Peter Truskier
    Premedia Systems, Inc.
    510-655-4454
    >

  • Printing problem with Summarize Comments?

    Printing problem with Summarize Comments in Pro 10.1.6? When I print, I only get the number boxes on one page and the comments on the next page. The numbered boxes don't show up on the actual image itself.

    Um I dont know if im doing something daft but I tried this like you said
    PrinterJob printJob = PrinterJob.getPrinterJob();
    printJob.setPrintable(this);
    if(printJob.printDialog()){
    try {
              PageFormat pageFormat = printJob.defaultPage();
              if (pageFormat.getOrientation() == PageFormat.PORTRAIT) {
              landscape = 0;} else {
                   landscape = 1;}
              System.out.println("THE ORIENTATION IS "+ landscape);
              printJob.print(); }
    catch (Exception PrinterExeption) { PrinterExeption.printStackTrace();}
    and it doesnt seem to work as I tried it both as landscape and portrait in the print dialog but landscape is always 0.
    cheers
    pmiggy

  • Printer problem with AW 6.2.9

    I have a recurring printer problem with both hp deskjet 5150 and Epson R220. After much work with techs at both, we have determined that it is an AW problem (v. 6.2.9) Other files print okay. I've searched through recent posts and found similiar questions, but the answers aren't specific to my problem. I gather that it involves trashing certain AW files, such as Appleworks.plist and other Appleworks prefs. It will help it I know the specific files to trash and as much detail about how to find them on the HD. I will be infinitely grateful for any help.
    OSR
    Mac G4 Mac OS X (10.4.6)
    Mac G4   Mac OS X (10.4.6)  

    Welcome to Apple Discussions
    You are correct that deleting the AppleWorks preferences can fix some printing problems. I'm surprised that in finding that information you didn't come across a post with the specific information or a tip to my user tip, AppleWorks has stopped working correctly, that explains which preference files ot delete.
    Make sure you have the newest printer driver for each printer. Also, use Disk Utility to repair permissions after any system update or upgrade.

  • Startup problem with Lion OS 10.7.3

    Just recently, I've been experiencing a startup problem with Lion. I don't usually have any issues running my Mac, so I'm at a loss why this is happening now.
    I have an Intel Mac Pro running 10.7.3. I usually leaving my Mac running all the time and only restart when the need arises. In addition to being my main computer, this mac alsocontrols a MacMini that serves as a music server thru screen sharing.
    This past weekend, I restarted my Mac and could not get past the grey screen. The mac chimes, the apple logo appears with the spinning gear, the blue screen briefly appears, but instead of progressing to the desktop it reverts to the grey screen with a repeating cycle of the spinning gear appearing (spins for a while, stops, disappears, reppears spinning, stops, disappears, over and over) - never progressing beyond that stage.
    I decided to reinstall the system and things have been fine for the past few days. Today, restarting again resulting in the same problem.
    I've tried several things without success. I disconnected all peripherals, reset the PRAM/SMC, ran Disk Utility from a install volume and ran repair and permissions (no problems reported). Tried safe mode startup - a progress bar appeared but never fully progressed and could not get to the desktop.
    Recent changes included updating the OS to 10.7.3 and Adobe Photoshop CS5.5 - no recent hardware changes. No bluetooth devices connected.
    Any thoughts? Thanks -

    Thanks -
    I've reinstalled the OS today and am back up and running.
    But, since this is twice this has happened within the past week, I'm worried about might be causing this issue - besides bad luck. My Mac is usually rock solid - can't remember the last time I've had to reinstall the OS in the past few generations of OS X.

  • Printing Problems with PDF - Adobe Acrobat

    Printer - HP Deskjet 3070A
    Laptop - Asus Zenbook running Windows 7 Home Premium
    Issue: Printing problems with PDF (Adobe Acrobat Reader)
    Dear All,
    Please help!
    My printer was working absolutely perfectly until my brother in law recently needed to borrow my printer. He plugged in his laptop running Windows 8 (awful thing that is). Since he did this to print his own PDF, I cannot print mine.
    Although all the text will appear on the page perfectly both in the document view and on actual printing, it appears that some of the transparent formatting stuff on a PDF - such as boxes you have to fill in and transparent areas (such as you find on glorious tax forms) are omitted completely. In fact, in their place I was getting a single black dot. Now, after uninstalling and re-installing updates for the printer, windows 7, adobe acrobat reader, etc.etc. I get squat. Just all the text laid out but none of the shading or boxes.
    I have tried fiddling with the printer settings; the  print as 'photo' option, dpi settings, greyscale - as much as I can think of and I am thoroughly stumped.
    In a desperate attempt, I even installed the Universal Printer Drivers - thinking it might have been that. No. All I got was a page of gobbledygook. Consequently, I uninstalled and reinstalled the normal drivers again.
    If there are any wonderful people out there with any fabulous ideas about how I can get my shading and boxes back; I'd  very much appreciate it. Sadly I have a tax return to fill out (which is already fabulously late) and need my printer to work!
    Much appreciation in advance x

    Hey there @Reverie!
    Thanks for posting on the HP Forums!
    I can see that the printer is no longer printing in the correct format after it was plugged into the Windows 8 computer!  You mentioned you have run the updates and uninstalled/re-installed the printer software.  Have you uninstalled and re-installed the Adobe software? Are you getting the same issue from other programs as well? Are you getting the same issues if you are logged in as a different user on the computer? 
    I have located the HP Update Software Utility that may be able to help.  You can download an run the utility.  It may be able to locate any other updates for the printer.
    I would also recommend running a disk cleanup on the computer to clear any temporary files and junk files that may be causing some performance or software issues. If you do not know how to run a disk cleanup on the computer please follow this document regarding Delete files using Disk Cleanup.  It is recommended to restart the computer after a disk cleanup. After the restart try the print job again!
    Let me know if that helped and thanks again for posting on the HP Forums!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • Is there a fix for the WIFI problem with Lion? How can I get Lion off of my Mac?

    Is there a fix for the WIFI problem with Lion? How can I get Lion off of my Mac?

    gmiller0 wrote:
    My mac has 10.7.3 and will not connect to wifi after it wakes up. Have contacted AppleCare but the problem cannot seem to be resolved.. I guess this is a major issue with Lion:(
    What model of Mac?  I have a MBP running 10.7.3 and do not have that issue.  From the other couple of posts I've seen about it, it seems to be maybe an issue with some iMacs?  Have your tried searching the Lion or iMac forums for similar issues, just to see if anyone has hit on why it is happening?

  • Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....

    Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...

    I have the MacIntosh volume and the Boot Camp partition only.  I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive. 
    The tech at the Apple Store had a previous life as a MSCE and was very helpful.  I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard.  I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick. 
    I do not have another installation, so that is not an option.  I will try to create an external, I have plenty of hard drives around and see if I can get it done that way.  It might take me a week or two to get back to it, but I will comment back upon completion of that effort.  Thanks for your help....Dave Iverson

Maybe you are looking for