Printing problems with macbook pro and canon 4150

I have a Macbook Pro running 10.6.8.  I also have a Canon imageclass MF4150 printer.  I downloaded from the canon website the driver Mac-UFR II Printer Driver V2.25.  When I try to print, I get an error message.
Can anyone suggest a generic printer driver that would work?
Thanks in advance for the help.
kate

I have a NetGear WGR614 that has worked without issue for a macmini, my MBP and direct-wired PCs and Linux towers.  It only has issues when ATT DSL causes connectivity issues what require them fixing things in their connection centers.
WGR614 is a few years old, but they still sell it.
I was warned years ago against DLink.
LinkSys was recommended almost as more reliable then NetGear.
But then Airport Express is an Apple product and Apple has direct links to set them up from your Mac.

Similar Messages

  • Problem with Macbook pro and Airport Express!!!

    I'm having the same problem I have seen others with right now with my macbook pro and my airport express. I have set up and reconfigured the A.Express 3 times now. I have the green light, i have the Ethernet configured, I have full bars of reception but I cannot access the signal. meaning I can not go online even though everything is set up correctly and says that it's good to go. Anybody have any advice?
    Is it an issue with having to re access the network I created with the Airport utility?
    It worked the first time I configured the A. Express with my macbook pro no problem. Then suddenly my computer was just not getting internet. Even though all the settings were ok and I was even getting full bars reception from the device on my comp. So I reset the A.Express and have been having the problem mentioned above since that point. Please help me if you have any advice. Thanks so much in advance.

    I had the same problem, and to test if I was connected launched Safari and Safari after a few seconds of not connecting, it shows you a dialog box, with options to follow up, I follow the dialog box and like magic I am connected to the Internet.

  • Probleme with macbook pro and avast

    Hello,
    please i have a macbook pro mi-2009 with mac os x 10.8.5 and i installed avast and then all the applications don't want to start unless safari and default software and when i restart my mac he don't want to start again and when i started with windows boot camp he start normal.
    Sorry for my english
    and thanks

    i tell you that the machine don't want to start with mac os it start just with windows, and i don't have a time machine to restore to the backup

  • Firestore Importing Problems with MacBook Pro and FCP

    Hello,
    I've encountered a problem trying to import my P2 files from my brand new Firestore and for some reason my trusty MacBook Pro doesn't acknowledge their existence. Here's my process so far:
    1.) I captured the footage in P2 mode at 720/24P
    2.) I initially just tried to plug the Firestore into the computer.
    3.) Then I saw that I had to set it up into DD Drive mode. I did this before running the "Organize P2" utility.
    4.) When I opened the Firestore's icon on the desktop I saw only the ten reel folders (numbered 0-9) and the log folder. None of these folders had any clips inside them.
    5.) After checking the manual again I hit the "organize P2" utility. This did not make any files show up.
    6.) I tried "Import Panasonic P2" inside of FCP, but it doesn't see the files either.
    7.) The only encouraging factor is that I CAN playback the files on my HVX200 from the device.
    BUT HOW CAN I GET THEM INTO FINAL CUT PRO!?!?!?!?!
    Thank you so much,
    Stef

    BUT HOW CAN I GET THEM INTO FINAL CUT PRO!?!?!?!?!
    FCP>main menu>file>Log & Transfer window

  • I have a problem with macbook pro OS 10.5.8 and cannot play youtube anymore, before Yes

    i have a problem with macbook pro mac os 10.5.8 and cannot play youtube but before ther is no problem abou this. now there is warning sign to install adobe flash player, but when i install adobe it said cannot be compatible, and I went to the apple store, they sid need to upgrade the system to mac IOS 10.6 and i dont want to spend much... somebody to help me this

    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading from Snow Leopard to Lion or Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    This, Adobe Flash Player 12.0.0.70, is the current version of Flash. It should work with Snow Leopard or later.

  • How can I print from my MacBook Pro to Canon MP560 using rear tray?  I can't find that "option" in the print selection possibilities.

    How can I print from my MacBook Pro to Canon MP560 using rear tray?  I can't find that "option" in the print selection possibilities.

    Sure can.
    With a document open in Pages, select to print so that you can see the print dialog as shown below.
    Note that to see this view, you may need to press the Show Details button in the bottom left corner. In the image above, since I have the expanded view displayed, this button changes to Hide Details
    So with the view shown, first change the Presets menu to Default Settings. Then click the Layout drop menu and select Quality & Media. Make the changes you want and then click on the Presets menu and select Save Current Settings as Preset...
    At the next window, give the Preset a name and select the Only this Printer radio button and then click OK to save it. That's it.
    As for the Preset that you already have, if you no longer want this preset then you can delete it via the Show Presets menu pane that you've used already.

  • How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

    How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

    If you have not already done so, your chances will really improve if you....
    1) Connect the printer to the USB port on the AirPort Extreme
    2) Download and install Bonjour Print Services for Windows on the PC

  • Having problem with MacBook Pro launching mission control without prompting

    Having problem with MacBook Pro, launching mission control without prompting. Please advise. Thank you.

    It may be a swipe that's doing this >  Mac Basics: Mission Control

  • Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help

    Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help!

    Hi ..
    Shift key boots into Safe Mode, not Recovery.
    This only works on a Mac running v10.7 Lion or later.
    Startup your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities to repair the startup disk and restore OS X using OS X Recovery
    If you can't boot into Recovery Mode, help here >   Mac OS X: Gray screen appears during startup

  • Hearing conflicting reports. What camcorders work best with macbook pro  and imovie

    I am looking to purchase a new HD Camcorder, but Im told some of them dont work well with macbook pro and Imovie.
    Im in the process of buying a new iMac and want to make sure I will be able to load the movies direrct to imovie.
    Thanks.

    This forum is for mobile iMovie (iPads & iPhones).
    you may need the iMovie Mac forum:
    https://discussions.apple.com/community/ilife/imovie

  • Does a dell c2660dn printer work with macbook pro?

    does a dell c2660dn printer work with macbook pro?

    According to their site, they offer no drivers for Mac, or mention anything about Apple.
    I would say no.

  • Printer problems on MacBook Pro with CC Cleaner

    Hi
    I just installed CC Cleaner and ran the program to clean up some files.  Since doing so I can no longer print to my Epson PX800FW.  I am afraid that an important file might have been deleted.  I ve tried to reinstall the program / printer on my MacBook Pro but it is not working - the computer will not install the program.  Can someone help please?  Thanks

    Uninstall CC Cleaner. Go to the developers web site and get uninstaller instructions.  That may be your problem.
    Do not use ANY so called 'performance enhancing' or 'cleaning' applications in your MBP.  They are unnecessary and many create unanticipated needless problems.
    Ciao.

  • Weird problem with Macbook Pro 15" and Asus PB278 monitor

    Hi there
    I recently bought a brand new MacBook pro 15" the one with a dedicated nvidia 750 vid card. However I'm facing weird problems while connecting it to a external monitor Asus PB278 (1440p monitor). I use a mini display port to display port cable.
    My problem is: Sometimes it works perfectly, but then if I put the laptop to sleep, sometimes it won't recognise the screen at wake up, at first I tried to restart the system, power on and off the monitor, connecting and reconnecting the cable... nothing worked. I even bought a expensier cable thinking it was probably a low quality cable. I found that then only way to fix this is to connect the monitor with a mini display to HDMI cable I have (won't support over 1080p), and then put the mini display to display port cable again... it is freaking bizarre.
    This is very frustrating, I live outside the US and while the retailer will honor the guarantee I'm not sure if this is a Software or Hardware problem, It will take them about 3 weeks to replace my system which is unfortunate due to I have plenty of work to do. I don't want to send it on guarantee just to find out hey... display recognition is broken again. My questions are:
    Is there a way to know if this is a hardware or software problem?
    I've heard Yosemite is having some issues regarding external displays, is this one of those?
    Have you found yourself experiencing this problem? Could you fix it?
    Sorry if my english is a bit weird, thanks in advance.

    Hi Gatobolo,
    Thank you for contributing to the Apple Support Communities.
    It appears that you've discovered unusual behavior with your MacBook Pro and an external display, where you need to temporarily connect a different display adapter before you can use your Asus PB278 again.
    I can offer some additional tips to help resolve or further isolate the issue you're seeing.
    First, try the following resets to see if they eliminate the behavior:
    You can reset the Mac's parameter RAM and SMC.
    Next, if the issue occurs again, try restarting your Mac into Safe Mode:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    You can find the steps above in this article:
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    If your display is recognized in Safe Mode, or after restarting again, the issue may be due to a software conflict.
    Another suggestion mentioned in the article above is to try a different type of display adapter, such as a Mini DisplayPort to Dual Link DVI adapter.
    If the issue persists, you can also back up your data, erase your hard drive, and reinstall a fresh copy of OS X Yosemite.
    OS X Yosemite: Erase and reinstall OS X
    If the issue still occurs after a clean install, troubleshooting the hardware may be necessary.
    Best Regards,
    Jeremy

  • Problem of connection with macbook pro and panasonic TV

    Hello,
    I have a macbook pro and a panasonic TH-42PW*4. This TV has a VGA input. That's why I have bought a VGA adaptater and a VGA cable.
    However, when I have tried at home. I copied the video and I can see the name of the model of my TV on my macbook pro. But, it doesn't work. There's nothing on my tv.
    If somebody could help, that would be really great.

    You might do better not posting your question on the "Using iPhone" board. Perhaps here: http://discussions.apple.com/category.jspa?categoryID=190

  • HP Print Software for MacBook Pro and Windows 7 gone awry on HP OfficeJet Pro 8600

    Almost one year ago today I wrote a post about my first problem with HP OfficeJet Pro 8600 N911.  Today I write my last.
    I have an HP OJP 8600, with option Tray 2 included, and auto feed included.  My system test computers are:
    1.  Apple MacBook Pro, OS X 9.5, HP software is the only 3rd party software.
    2.  HP Laptop, Windows 7.
    The OJP wireless radio gave up, so I cannot run it wirelessly.  It is connected by ethernet to my router.  All five of my computers can use.  All of the functions of the printer are usable.  For example: it prints, it scans, it copies, it faxes.  All functions working.  My problem is with the HP software download to the Apple and to the HP Laptop.
    I would like to be able to use all of the feature settings when I print.  But alas, I cannot.  Both the Apple and the HP Laptop have a similar appearing window that opens when you choose to print something.  In theory, you are supposed to be able to control a range of paper types and quality, print type and quality, and (in my case with the two trays) what tray to use to select the paper.
    I regret neither of the computers perform these functions.  And all of the mistakes that I find on the Apple computer I find on the HP Laptop Windows 7 computer.
    I don't have the time to test every combination.  But I think the table below will help you get an idea of what the problem is with the software that HP sends offshore for maintenance.
    The results of the paper quality selection, the print quality selection, and the tray availability are as follows:
    PAPER              PRINT QUALITY                         TRAY AVAILABILITY
    Plain Paper
    Plain Paper  DRAFT/NORMAL/BEST/MAX DPI gray              Auto/Tray 1/Tray 2
    Thick Paper  DRAFT gray/NORMAL/BEST/MAX DPI gray         Auto/Tray 1/Tray 2 gray
    HP Bright    DRAFT/NORMAL/BEST/MAX DPI gray              Auto/Tray 1/Tray 2
    InkJet
    Other        DRAFT gray/NORMAL/BEST/MAX DPI gray         Auto/Tray 1/Tray 2 gray
    HP Bright    DRAFT gray/NORMAL/BEST/MAX DPI gray         Auto/Tray 1/Tray 2 gray
    Specialty
    Other        DRAFT gray/NORMAL/BEST/MAX DPI gray         Auto/Tray 1/Tray 2 gray
    Card         DRAFT gray/NORMAL/BEST/MAX DPI gray         Auto/Tray 1/Tray 2 gray
    Brochure
    HP Brochure  DRAFT gray/NORMAL/BEST/MAX DPI gray         Auto/Tray 1/Tray 2 gray
    Other        DRAFT gray/NORMAL/BEST/MAX DPI gray         Auto/Tray 1/Tray 2 gray
    In summary the new HP Print software for Apple and Windows 7 computers has identical programming mistakes on both operating systems.  Under no circumstances can I use the MAX DPI setting.  
    The user cannot use the features that are built in to the HP software because the paper selections override the locked tray, the print quality, and the unusually small list of HP selection of papers.
    It is time to invoke my warrenty rights.  There are too many systemic problems with the software and the device.  I don't have any more time to act as an unpaid system test analyst for HP.
    Who do I contact to use my warrenty before it runs out in a few weeks?

    Hi,
    Those are not programming mistakes, but those are limitations of the product, please check the printer specifications below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02858465&tmp_track_link=ot_faqs/top_issues/en_u...
    As you may find under Paper-handling specifications > Paper tray capacities, Tray 2 only support Plain Paper.
    Maximum DPI is only only supported on Photo Paper, therefore those limitations are applicable.. these limitations are also listed on the Printing Specifications section above, Maximum DPI is listed as 4800 by 1200 dpi:
    Color print resolution: HP enhanced photo quality with Vivera inks (up to 4800 by 1200 dpi Optimized on HP Premium Plus photo papers with 1200 x 1200 input dpi)
    As well that can be find listed within the Print photos on photo paper or the Print borderless documents sections, you may simply search for Maximum DPI within the user guide as a reference:
    http://h10032.www1.hp.com/ctg/Manual/c03026243.pdf
    Those are not an issues with the printer but those expected limitations fully meet the product specification.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for