Printing quanties

I just upgraded to PSCS5 from cs3. Win7 pro 64bit. All is well till I start printing. I print to 2 R1900s. The process goes like this: When I change the number of prints to, say, 3. The printer will print one print. The next time I try to print that image, it will print 3 regardless of the quantity input. From then on the quantity will be one job behind, printing the quantity that was last entered.
The other problem occurs when I switch printers. The profile will switch from SPR Premium Luster, (the one I choose), to Stylus Photo R1900 (no good).
I never had these issues when printing from CS3. Any ideas?

You have found, as others have, that with some printer drivers the settings changes you make (e.g., number of prints) seem to be staged in some intermediate place, so what happens is that the number of copies you wanted for this print will end up happening for the next print. This happens with other settings as well.
There's a workaround being reported that causes the settings values to be transmitted to the printer without actually going through the print process... This works for some folks:
File - Print in Photoshop.
In the Photoshop Print dialog, set the number of Copies.
Click the [Print Settings...] button.
[OK] out of the printer settings dialog.
Now click [ Print ].
See also this thread:  http://forums.adobe.com/thread/835654
-Noel

Similar Messages

  • Not printing in quicken

    officejet j4860aio is not printing in Quicken.  It was until about 3days ago, but unsure what changed to make it stop.  I have run all the diagnostic stuff that HP recommends.  any suggestions?

    Hi
    I think ECESS is an currency/quantity field right?? Correct Me If I wrong.
    Try to declare the reference field for this field in the smartform. What I mean is for currency and quantity fields in smartform, reference fields needs to be given.
    In the Global Definitions-->Select the Tab "Curr/Quant Fields". Here give the internal table and field name ecess, in the reference Field give the standard table name/field name. And give the data type which is applicable there.
    Vishwa.

  • Object_not_charlike error in ALV print

    I get the object_not_charlike run time error when i use print option in my ALV grid (I used class objects).
    I know that it is because of some quant fields & currency field that are in the columns.
    I feel i am not referencing them correctly.
    The internal table that I am using doesn't have any Uom field or currency type field. So, I was trying to reference to MARA-MEINS and T001-WAERS. I don't think i am getting it right.
    My internal table is called Itab.
    and the 2 quant fields are MINBE,EISBE and 2 currency fields are 'VERPR,STPRS. Please advice..Thanks.
    perform append_catalog using 'MINBE' 'MARC' .
      perform append_catalog using 'EISBE' 'MARC' .
    perform append_catalog using 'VERPR' 'MBEW' .
      perform append_catalog using 'STPRS' 'MBEW' .
    form append_catalog using value(p_fname)
                              value(p_tname).
      data : v_fcat type lvc_s_fcat.
      v_fcat-fieldname = p_fname.
      v_fcat-ref_table = p_tname.
    *  v_fcat-tabname = 'ITAB'.
      case p_fname.
       when 'EISBE' or 'MINBE'.
        v_fcat-ref_table = 'MARA'.
    *    v_fcat-REF_FIELD = 'MEINS'.
        v_fcat-qfieldname    = 'MEINS'.
       when 'VERPR' or 'STPRS'.
        v_fcat-ref_table = 'T001'.
    *    v_fcat-REF_FIELD = 'WAERS'.
        v_fcat-cfieldname = 'WAERS'.
      endcase.
      append v_fcat to gi_fieldcat.
    endform.                    "APPEND_CATALOG
    I even removed qfieldname and cfieldname from the case-endcase, still it dumps while I click on print option (Export to excel work fine).

    Hi
    If you want to indicate the reference field for currency and quantity fields, u need to add these reference fields to your output table:
    PERFORM APPEND_CATALOG USING 'MINBE' 'MARC' .
    PERFORM APPEND_CATALOG USING 'EISBE' 'MARC' .
    PERFORM APPEND_CATALOG USING 'VERPR' 'MBEW' .
    PERFORM APPEND_CATALOG USING 'STPRS' 'MBEW' .
    PERFORM APPEND_CATALOG USING 'MEINS' 'MARA' . "<-------- Unit
    PERFORM APPEND_CATALOG USING 'WAERS' 'T001' .  "<-------- Currency
    *       FORM append_catalog                                           *
    *  -->  VALUE(P_FNAME)                                                *
    *  -->  VALUE(P_TNAME)                                                *
    FORM APPEND_CATALOG USING VALUE(P_FNAME)
                              VALUE(P_TNAME).
      DATA : V_FCAT TYPE LVC_S_FCAT.
      V_FCAT-FIELDNAME     = P_FNAME.
      V_FCAT-REF_FIELDNAME = P_FNAME.
      V_FCAT-REF_TABLE     = P_TNAME.
    *  v_fcat-tabname = 'ITAB'.
      CASE P_FNAME.
        WHEN 'EISBE' OR 'MINBE'.
          V_FCAT-QFIELDNAME    = 'MEINS'.
        WHEN 'VERPR' OR 'STPRS'.
          V_FCAT-CFIELDNAME = 'WAERS'.
      ENDCASE.
      APPEND V_FCAT TO GI_FIELDCAT.
    ENDFORM.                    "APPEND_CATALOG
    Max

  • Print multiple Transfer Orders on one output

    Hi All
    I am having trouble in getting the correct config for printing multiple Transfer Orders on the same output.
    As part of our warehouse supervision there are occasions when we need to move materials from one bin to another. Individual materials can be moved using LT01 which prints the transfer order correctly.
    However, when we need to move several materials we use LT10. This prints the Transfer Orders individually. Is there a way to have just one output that lists all the materials? So it would be one transfer order with multiple item lines
    Thansk in advance
    Darren

    Hi Darren,
    Thanks for your update.
    I also didn't fix this issue.
    But in LT10 screen: if you change the radio button from Quant to Storage bin you will only get one combined TO per bin instead of individual TO’s per quant. The steps assume the materials are going to the same storage bin. But if the user need the option to choose by line item and putaway to a specific bin,it seems can not meet their requiements.It may need development.
    Thank you and good luck!
    Tina

  • Error in printing Inventory list (LI04)

    Hi Experts,
    I am printing inventory list using Tcode LI04. I have entered the WH number, Inventory record and select the print list.
    However I am getting a runtime error. I would like to ask if there is a limit in the quants to be processed using the transaction?
    Many thanks for your help.
    Mylene

    Hi Mylene
    With this you need to give List name and Print report name also to make output come.
    Amol

  • Issue with printing the decimal value in smartforms

    Hi experts,
    Here I am printing the net valve in to smartforms.The problem is, valve i want to print is 4505.600.But it is displaying as 45056.00.It is in OMR currency. This problem occurs only for this currency.i am picking the value from PO.
    I have used komv-kwert feild for display. Please give me the solution
    Regards,
    madhu

    Hi Madhu,
    I have faced similar problem in my Smartform with currency JPY with no decimal places at all.
    To resolve this you have to specify Reference Currency with the Currency type  under Global Definitions-->Currency/Quant.Fields. For example take your case :
    Fieldname               Reference Field     Data Type
    WA_FINAL-KWERT              W_WAERS           C CURR
    *Here W_WAERS should contain OMR
    *WA_FINAL-KWERT sould contain 45056.00 then your output will look like 4505.600
    Thanks & Regards,
    Rock.

  • Can our hp laserjet enterprise 500 color printer m551use 67lb card stock?

    The printer specifications list card stock but no weights. 
    This question was solved.
    View Solution.

    Hello,
    the required media weight is not supported by the printer.
    As you may find listed within the Media Weight specification below, the printer support up to 58 lb media.
    Media weight:
    Tray 1: 16 to 58 lb (plain); 28 to 58 lb (glossy);
    Tray 2: 16 to 43 lb (plain paper); 28 to 58 lb (glossy paper)
     You may find the product specification below:
    http://h10010.www1.hp.com/wwpc/us/en/sm/WF06b/18972-18972-3328060-15077-236268-4184772-4184773-41847...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Print Quote Report

    Hi All,
    I have a requirement to develop the custom print Quote Report. When i review the standard pring quote report ,I found a call like <?call-template:TermsTemplate?>.
    This statment itself is getting all the Terms and Conditions for that report. when i looked in the ASOPRTXSL.xsl, I see the below statement
    <xsl:template name="TermsTemplate">
    <xsl:call-template name="PrintContractTerms"/>
    </xsl:template>
    I am pretty new to XSL, dont know what's happening here. Please help me ASAP
    I have also posted this question in BI Publisher but did not get any respose . Please Help
    Thanks

    If you want to create a custom report using concurrent program then refer:
    http://apps2fusion.com/apps/apps/63-xml-publisher-concurrent-program-xmlp
    If you want to create a custom report using OAF page then refer:
    http://apps2fusion.com/at/51-ps/260-integrating-xml-publisher-and-oa-framework
    -Anand

  • HELP to Open and Print automatic a REPORT

    Hello, I'm a Portuguese Developer, and i've a challenge, that is, i want to open REPORT by FORMS in RDF format and i want to open and print automatic way, i do not want to open, and then have to go print button to pint them.
    I want to open by FORM way and print automatic and close imediatly.
    HEP ME PLEASE!
    Thank you

    Aslam o Alikum (Hi)
    Ofcourse you can do this by specifing system parameters like DESTYPE=Printer and DESNAME=PrinterName
    Replace PrinterName with you printer name
    See System Parameters in Reports Under Data Model

  • Queation Regaring Print Quote Report

    Hi All,
    I have a requirement to develop the custom print Quote Report. When i review the standard pring quote report ,I found a call like <?call-template:TermsTemplate?>.
    This statment itself is getting all the Terms and Conditions for that report. when i looked in the ASOPRTXSL.xsl, I see the below statement
    <xsl:template name="TermsTemplate">
    <xsl:call-template name="PrintContractTerms"/>
    </xsl:template>
    I am pretty new to XSL, dont know what's happening here. Please help me ASAP
    Thanks

    Can anyone answer this please. This is urgent . Thanks

  • Questions on Print Quote report

    Hi,
    I'm fairly new to Oracle Quoting and trying to get familiar with it. I have a few questions and would appreciate if anyone answers them
    1) We have a requirement to customize the Print Quote report. I searched these forums and found that this report can be defined either as a XML Publisher report or an Oracle Reports report depending on a profile option. Can you please let me know what the name of the profile option is?
    2) When I select the 'Print Quote' option from the Actions drop down in the quoting page and click Submit I get the report printed and see the following URL in my browser.
    http://<host>:<port>/dev60cgi/rwcgi60?PROJ03_APPS+report=/proj3/app/appltop/aso/11.5.0/reports/US/ASOPQTEL.rdf+DESTYPE=CACHE+P_TCK_ID=23731428+P_EXECUTABLE=N+P_SHOW_CHARGES=N+P_SHOW_CATG_TOT=N+P_SHOW_PRICE_ADJ=Y+P_SESSION_ID=c-RAuP8LOvdnv30grRzKqUQs:S+P_SHOW_HDR_ATTACH=N+P_SHOW_LINE_ATTACH=N+P_SHOW_HDR_SALESUPP=N+P_SHOW_LN_SALESUPP=N+TOLERANCE=0+DESFORMAT=RTF+DESNAME=Quote.rtf
    Does it mean that the profile in our case is set to call the rdf since it has reference to ASOPQTEL.rdf in the above url?
    3) When you click on submit button do we have something like this in the jsp code: On click call ASOPQTEL.rdf. Is the report called using a concurrent program? I want to know how the report is getting invoked?
    4) If we want to customize the jsp pages can you please let me know the steps involved in making the customizations and testing them.
    Thanks and Appreciate your patience
    -PC

    1) We have a requirement to customize the Print Quote report. I searched these forums and found that this report can be defined either as a XML Publisher report or an Oracle Reports report depending on a profile option. Can you please let me know what the name of the profile option is?
    I think I posted it in one of the threads2) When I select the 'Print Quote' option from the Actions drop down in the quoting page and click Submit I get the report printed and see the following URL in my browser.
    http://<host>:<port>/dev60cgi/rwcgi60?PROJ03_APPS+report=/proj3/app/appltop/aso/11.5.0/reports/US/ASOPQTEL.rdf+DESTYPE=CACHE+P_TCK_ID=23731428+P_EXECUTABLE=N+P_SHOW_CHARGES=N+P_SHOW_CATG_TOT=N+P_SHOW_PRICE_ADJ=Y+P_SESSION_ID=c-RAuP8LOvdnv30grRzKqUQs:S+P_SHOW_HDR_ATTACH=N+P_SHOW_LINE_ATTACH=N+P_SHOW_HDR_SALESUPP=N+P_SHOW_LN_SALESUPP=N+TOLERANCE=0+DESFORMAT=RTF+DESNAME=Quote.rtf
    Does it mean that the profile in our case is set to call the rdf since it has reference to ASOPQTEL.rdf in the above url?
    Yes, your understanding is correct.3) When you click on submit button do we have something like this in the jsp code: On click call ASOPQTEL.rdf. Is the report called using a concurrent program? I want to know how the report is getting invoked?
    No, there is no conc program getting called, you can directly call a report in a browser window, Oracle reports server will execute the report and send the HTTP response to the browser.4) If we want to customize the jsp pages can you please let me know the steps involved in making the customizations and testing them.
    This is detailed in many threads.Thanks
    Tapash

  • Printing list view in ical

    I use mail and ical for everything now. Everything is fine except When I want to print the "list view" which shows my “to dos”. It displays the URL the “do to” is attached to in mail. I use notes often in mail and enter to dos in the notes so they will have URL links. The link only becomes a nuisance when I want to print, otherwise it’s very useful.
    Why would the long URL paths display when in print view???!!!!! It doesn’t make any sense.
    Is there anything I can do?
    Thank you

    ecernek,
    There is no event list option on iCal like the one on the iPhone.
    That number means that you have an event invitation. Use iCal>View>Show Notifications to choose what to do with the notification.

  • How can I print just the year view in iCal?

    Just trying to print the year view.

    If you choose the "list" option in View on the print dialog box and uncheck everything at the bottom except "To do items" you may be able to get what you're looking for.  It appears that the list includes all todos including those without due dates, so you might have to do something to assign due dates to all your todos and in iCal preferences restrict the visibility of todos outside of a certain date range.  Unfortunately, you can't save any of this work into a standard report (at least not that I know of) - the print dialog in iCal starts from scratch every time you invoke it.  Hope that helps at least some.

  • How to print monthly view in ical

    I have the most current version of ical.  It wont let us print a monthly view.  It only lets us select fro day or list.  I am sure i am doing someething wrong, but I dont know what.  Running MAC OS X 10.5.8. 
    Ical version 3.0.8. 

    earlnkids,
    The text size selection should be available in the first page of the iCal print options:

  • Is there a way to create a year at a glance with detail and print?

    Is there a way to create a year at a glance with detail and print?

    To do what Dave indicated you need to do, it depends on what version of Acrobat you have:
    Acrobat 8: Advanced > Enable Usage Rights in Adobe Reader
    Acrobat 9: Advanced > Extend Features in Adobe Reader
    Acrobat 10: File > Save As > Reader Extended PDF > Enable Additional Features
    Acrobat 11: File > Save as Other > Reader Extended PDF > Enable More Tools (includes form fill-in & save)
    I wonder what it will be next time?

Maybe you are looking for