Printing "REPORTS" with Quicken Deluxe 2006

Installed Windows 7. Cannot print "Reports" on HP PSC 1410. Can print Quicken "HELP" from same software

Weeks ago.

Similar Messages

Hyperion Anaylzer - how to Print report with information in pages?

Hi, I use Hyperion Analyzer Version: 6.1.1.00206 (from Help | About menu). I created report with pages (on Navigate button selected the Pages). In pages are months (January, February, March, etc). Now I would like to print current report. So I did: 1. click on arrow beside Print button 2. Print Current Report windows is displayed. I selected default options and press OK button. Report is printed, but there is no page information printed out. So on paper there is report without months (January, February, March, etc). How to print report with information in pages? Thanks, Grofaty

Jia Shun,
I had the same issue for printing A/R Invoices - I created a Crystal Report based on a SQL View, works fine with A/R Invoice document, but the Draft Invoice printing has 3 pages: 1st page blank, 2nd page with watermark "DRAFT", 3rd page my Crystal Report layout without any data. When printing normally it is only 1 page.
Here is what I did as a work around:
Create two SQL Views, one select from OINV (joining INV1 and other tables needed), the other select from ODRF (joining DRF1 and other tables needed), for the draft printing.
Create two identicle Crystal Reports, only difference are: datasource location (from different views), the "draft" crystal report has a watermark section.
Go to Administration>System Initialization>Print Preferences and uncheck "Print draft watermark..."
Import both crystal reports. Invoice can be printed normally. But the Draft Invoice has more steps: Open Draft document report, change settings so it shows the DocEntry in the Draft Table. Select and open the desired document, hit Print Preview, and enter the DocEntry, it displays the layout with data and "DRAFT" watermark.
This is a workaround. I don't like it because it is not scalable - too much workload if you want to print 100 invoices.
Hopefully someone will provide a better solution.
regards,
G

Printing Problem with Quicken & Preview

I recently tried to print a Report in Quicken 2003. It just spit out 2 blank pages. I went back to print window and clicked on Preview and the Report shows but just spits out 2 pages. I went back to print window and did a Print as PDF and saved the file the desktop.
Opened the PDF with Preview and tried to print - it just spit out 2 blank pages again. Finally opened the PDF with Adobe and it printed fine.
I've had prior problems with Preview just spitting out blank pages.
I'm using an HP 6110 that in all other applications prints just fine.
Any idea why Quicken and Preview just spit out blank pages?
Thanks,
Doug

No resolution on this

I'm trying to print Checks with Quicken. the print is 1/2 way across check with single and doubles

My printer is the HP Laserjet 1102W When I load a single or double check into the manual feed vertically taken from a 81/2 x 11 sheet of checks Quicken prints so that only the date and amount show up in the middle of the check. I have used these checks for years with the manual feed on a Laserjet 4 Plus. How do I get the printing to move so that it covers the whole check?
Howard Wexler

Bobreba wrote:
I am using Quicken Essentials 1.7.4 on a [Mac Pro, 2.8 Ghz Quad Core Intel Xeon with 16 Gb of memory], running 10.7.5. I am in the process of upgrading everything to work on Yosemite and Quicken seems to be the most difficult problem to overcome.
Thanks for your response and feedback.
I would recommend you continue with Quicken Essentials. As noted by others, it performs well on Yosemite.
My personal experience is Quicken 2007 for Mac also on 10.7.5 (with many reports of it both updated and successfully running on Yosemite) and I personally would not touch Quicken Essentials with a 10 foot pole -- BUT, if it ain't broke for you, don't fix it!

Print report with diferent dimensions

i need print a report that print a page
with exatly 6.7x4.0 inches and stop. i make a report in report 6i windows nt and my printer don't have a custom settings. only a4 letter and b5. I have a continous page on printer and i need that the report stop when finished print 4.0 height

Hi,
You can go ahead. The max. size is 1023 chars.
REPORT zfr1000g
 NO STANDARD PAGE HEADING
 LINE-SIZE 999
 MESSAGE-ID fr.
Regards,
Anjali.
Refer the Documentation on Reports.
... LINE-SIZE col
Effect
Creates a report with col columns per line.
If the LINE-SIZE specification is missing, the line length corresponds to the current screen width. The system field SY-LINSZ contains the current line size for generating lists. The maximum width of a list is 1023 characters. You should keep lists to the minimum possible size to improve useability and performance (recommendation: LINE-SIZE < 132). For very wide lists (LINE-SIZE > 255), you should consult the notes for using LINE-SIZE

Problem to print report with graph

Hello,
I make a vi to print or save in html file my front panel results. In the results, I have a graph and to save it in my report I use the "Append Control Image to Report.vi".
The problem is when I print the report the Image is in the top of page and it's size is limited by the size of the left header text. And the top text (not header but just the Title text) is placed after the image.
Now when I save it in the HTML file, I have any problems in the structure of my report.
If you have suggestions, I listen to.
I have an idea to divert the problem is to make a vi to print the HTML file but I don't know to make it.
Thanks for help.
I have attach the file. A man please print the report and say me if the struct
ure is good. Like this, I know that the problem is a problem to my computer config or print config.(Use Labview 6.1)
Thanks for help.
SAM
Attachments:
Report_generation.zip ‏34 KB

Hi midtisam,
I've run your VI to test it for you. I believe I am seeing the same bahavior that you are. The graph always shows up at the top of the page even though it is added after the header. Also, I tried creating an HTML file and it worked correctly. I would suggest doing this since it seems to work better.
Now, you can not use the Print Report VI with HTML reports. If you are able, I would suggest just creating the HTML report and either printing it from your computer through Internet Explorer or sending the file to whoever needs it. Best of luck.
J.R. Allen

Print report with line-size 999

Hi everyone,
I need to print a report with line-size 999 in letter size. I´m using the complete 999 lines.
REPORT zfr1000g MESSAGE-ID fr
 LINE-SIZE 999
 NO STANDARD PAGE HEADING.
ANY SUGGESTIONS???
Thanks.

Hi,
You can go ahead. The max. size is 1023 chars.
REPORT zfr1000g
 NO STANDARD PAGE HEADING
 LINE-SIZE 999
 MESSAGE-ID fr.
Regards,
Anjali.
Refer the Documentation on Reports.
... LINE-SIZE col
Effect
Creates a report with col columns per line.
If the LINE-SIZE specification is missing, the line length corresponds to the current screen width. The system field SY-LINSZ contains the current line size for generating lists. The maximum width of a list is 1023 characters. You should keep lists to the minimum possible size to improve useability and performance (recommendation: LINE-SIZE < 132). For very wide lists (LINE-SIZE > 255), you should consult the notes for using LINE-SIZE

Print Reports with CUPS

Hi people,
I have forms 11g and i'm trying to print reports directly to a printer that is installed on the server in CUPS via samba. I can print to my printer from os. Example, i open a pdf and it prints. In oracle reports, i run the report successfully and it prints but in blank. The report is well created in reports cache. Anyone know what can i do?
p.s: don't know if i got it right placing my question here...Maybe in the reports forum?
Edited by: user12231131 on 16/Jun/2011 9:20

The problem seems to be Oracle Forms or Report related.
There is a Forms forum at Forms
and Report Reports

Trouble printing checks with Quicken

I have a Photosmart C8180 and it prints photos and documents wonderfully...but when I try to print checks form Quicken, they get into spooling twilight zone. I've walked away and looked a couple of hours latter and still spooling. Any ideas?
Jeff

Thanks Shawna,
I left a message on Quicken, (Intuit) site but have yet to hear a response. I will look into this site and pass on what I find.
Mr. Mom

OJP 8000 Wireless won't print landscape with Quicken 2008 Deluxe R9

Hi All,
I've been using Quicken for years with a HP LaserJet 4L in the "Landscape" mode.
My new OJP 8000 will print landscape from other programs, but not from Quicken.
Computer is:
HP Pavilion dv9500 Notebook
Vista Home Premium Service Pack 2
32-bit OS
Printer is:
Officejet Pro 8000 Wireless Printer - A809n (C9297A)
Install disk is: Officejet Pro 8000 A809, Vista Version 12.0.0
Quicken is:
2008 Deluxe R9
Thanks for any help,
Scott

I don't have a solution for you, but I feel that I should mention that Quicken has all kinds of printing problems since last years release. I've basically given up on Quicken as a result. I have found that with online banking I don't need to use Quicken as much as I used to. It's really a shame that a software company should screw up a really good product over the years, but that's exactly what they did. They have known about these printing problems for the last 2 years and have done little to solve them. Soon I will be uninstalling it from my computer.

Print report with continous paper by a thermal printer

I am trying to design a report (using Crystal Reports for VS2010) for a receipt to be printed on a thermal printer with continuous paper.(8centimeter paper) Now a receipt will need to have variable height according to the number of items it contains.
The problem is that Crystal Reports takes the page setup from those available in the print setup and all these paper sizes have a fixed length .
How can I set the paper to a continuos paper?

Hi,
When you go to Crystal Reports | Design | Page Setup there is an option for Dissociate Formatting Page Size and Printer Paper Size. Put a check in the box. You can set the horizontal size.
Also make sure you do not have anything in the page header or footer.
Good luck,
Brian

Application Popup when printing Report with printtoprinter

Hi there,
we have an ASP Application running on IIS for one of our customers. It was developed under
Visual Studio 2008 ASP.NET and we use the integrated Crystal Viewer Control.
The Application is sending Reports via PrintToPrinter directly to a local Printer. This all works
fine for a while. But after a while it starts generating application Popups on the webserver. The w3wp.exe
is generating Errors that sounds like the following :
Application Popup: {C5371A04-4027-44C2-A0D0-1D38F00C4E84}: w3wp.exe -
Component missing: The application could not be started, because cxlib7-2-1.dll could not be found.
Reinstallation mighty fix this problem.
Funny thing is, that this dll exists on the server. All these errors cause, that our customer
is not able to work, as long as this popus stays on the Webserver. This Application is
a Stockmanagment Tool and very important for our customer, so you might guess, that
he is not very pleased with this situation.
Is there any known issue with this DLL? I asked Business Objects a year ago and they had the idea,
that it might by a version conflict. We solved this problem, but now we have this error again.
Any ideas?
For more information just ask me!
Greetings
T.Hauptmann
Edited by: Tim Hauptmann on Feb 4, 2009 10:50 AM

Strange, but then we're working with computers... Seriously, all I have are ideas to try:
Place a copy of the cxlib7-2-1.dll into the app directory or win\system32. The dll should be in c:\program files\common files\business objects\2.7\bin by default. Also, it should have a version of 10.2.0.949 or a bit higher.
I believe you are using CR 10.5 (CR assemblies should have a version of 10.5.3700). See if using the latest runtime will help. SP 1 has been released for CR 10.5. The SP is here:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
The SP 1 redistributable is here:
https://smpdl.sap-ag.de/~sapidp/012002523100010010692008E/crredist2005_sp1_x86.zip
Ludek

Print Report with multiple copies

i have an one page report called Receipt voucher which is in
format of form. I have an query. I have to take four prints of same report. but the problem is that if i take print of 1st copy it should appear on report like origional-Customer,2nd time- Accounts,3rd time - Sales Dept., and 4th time Book copy.so is there any logic from which i can do this.
Plz help me How can i Do this?

Hi Paromita,
If I understand your problem correctly then, here is the summary of your problem -
a) There are multiple tabs on selection screen. Out of which the first tab has a mandatory field i.e., Material Number. And then there are other tabs.
b) So, unless and until you provide the value in first tab for the material number(which is a mandatory field), you cannot navigate to the second tab or any other tab for that matter.
So, ideally the second and rest of other tabs are mutually dependent on the first tab's information as it has a mandatory field. Unless and until you make the first tab inactive it will not let you enter data in the second tab and so on.
So, to ideally enable input in second tab, make the first tab inactive. Try this and let me know if it works.
BR,
Ravi

Problem printing Report with Image in BI Publisher 11g

I am working with BI publisher *11g* but I have problem printing images. Everything works fine if I do not include any images however when I add a image I get following problems.
When I tried printing PDF in output I get
Type /Xobject
subtype /Image
Filter /DTDDecode .......
When I tried printing HTML output I get
Type /Xobject
<html...
....>
When I tried printing RTF I get
{ \fontb1 }
{ \f0 Arial;}
{ \f1 Times:}
I think I am missing some BI publisher configuration. Can you help me in this regard.
Thanks,
Santosh
Edited by: user4956795 on Jan 16, 2012 2:08 PM
Edited by: user4956795 on Jan 16, 2012 2:18 PM

Isn't there a way for you to do this via a Package/Procedure versus having multiple queries?
Per the BI Publisher guide,
Following are recommended guidelines for building data models:
Reduce the number of data sets or queries in your data model as much as possible. In general, the fewer data sets and queries you have, the faster your data model will run. While multiquery data models are often easier to understand, single-query data models tend to execute more quickly. It is important to understand that in parent-child queries, for every parent, the child query is executed.
You should only use multiquery data models in the following scenarios:
To perform functions that the query type, such as a SQL query, does not support directly.
To support complex views (for example, distributed queries or GROUP BY queries).
To simulate a view when you do not have or want to use a view.
Thanks,
Bipuser

How to Print reports with Java Application

I'm developing a database application in java using rmi and swings. Now I want to take some printout of reports from that application. Is any report designer available for java applications. How can i solve this problem. Please help me.

Hi
I don't know i f exist a tool like you want, but, in Java
the print job is implemented by a class implementing the Printable interface.
A class "Printable" must implement the print method like is defined at scpec. This method, via the params, can do print by "drawing" the page and, finally, return an integer
indicate if the print loop must continue or not.
The drawing op over the printer Graphics context is realized by methos of Graphics object (if you want "print"
some text you can do g.drawString("some text",x,y) and so on).
See the tutorials for more info
Hope this help

Printing "REPORTS" with Quicken Deluxe 2006

Similar Messages

Maybe you are looking for