Printing SAPScripts in Thai on Hp Printers

Dear Experts,
I am trying to set up Thai printing in my system. I created a output device with device type, THSAPWIN. In the print preview of SAPScripts, my thai characters are cramped together in a mess and when I tried to print, I just see "#" everywhere.
Please help...
Thanks,
KH

The logic to build SAP Script and Smart form of all languages will be same. But while working on Asian language please take care of the following points.
1 Make sure you logon to SAP in thai language only.
2 At the Operating system level install the thai language.[Control panel - >Regional and language Option - >language Tab - > Click on Install Files for East Asian languages] If these language already installed then click on Detail and add the thai languages
3 At SAP level click on Customizing of Local layout[Alt+F12] and click on options.Go to tab I18N and click on Activate the multi-byte functionalities to support check box.
4.Take care of the Font while assigning to Character formar or paragraph format. Dont use normal font name. Example of chinese phone "CNSONG

Similar Messages

Problem with printing sapscript on new HP P2015 printers ?

A brand new printer is installed the HP P2015 at a customer. suddenly all sapscripts are printed in courier. we have already updated the drivers but somehow it doesn't seem to work ?
Is there something else that needs to be changed on the SAP side or just don't buy HP again perhaps the sollution ?

>
A. de Smidt wrote:
> the driver ZHHP2015 from http://h71028.www7.hp.com/enterprise/cache/37011-0-0-225-121.html
>
> is installed. only it's still not working.
> It became worse except for the title which is in lucida sans EF. but everything that is helvetica is printed through, so a whole sentence is compressed into 4 cm width over each other
>
> with the HPLJ5 driver the font at least was translated to a scalable courier kind of font
hello Smidt , where you find that driver ( ZHHP2015 ) i dont see it in the link you post ? if you can it can you ema1l me it please ?
ealmonte at e-diesco dot com
thanks

Major Printing Problem - Can't Print in any App, with Any Printers

I help my Aunt with her three Macs (2 eMacs, 1 MacBook, all running 10.4.8 right now) at her office, and she had me come to help recently because one of the eMacs stopped printing anything; here's what happens:
In every app besides Word (e.g. Safari, TextEdit, AppleWorks, etc.): If I click File>Print... or press 'Command-P,' the cursor turns into the spinning rainbow for a few seconds, and nothing happens (meaning I can do anything I want in the application, as if nothing at all happened).
In Word: If I click File>Print... or press 'Command-P,' Word sits for a minute with the spinning rainbow, then locks up and quits itself. BUT, if I click the little 'print' button in the toolbar (the one that bypasses the print dialog box), the file will print.
I tried resetting the printing system, setting up different printers on the computer, printing over the network and over USB (directly connected to port 1 on the eMac), and re-downloading/installing the printer drivers for the Brother 5250DN laser printer AND the HP LaserJet 1200 laser printer, but all to no avail.
I can run the Printer Setup Utility and recognize the printers (via Bonjour over the network and via USB), and the computer can run the printer setup utilities, so I know the printer communicates fine with the computer. I also can print to the printers (both the networked one and the Brother) from any of the other Macs (including my own laptop) over the network. But I can't get the print dialog box to show up for any printer on the one eMac.
I'm determined that this problem lies within the OSX printing system, but reinstalling the whole OS is not an option, as I would have to re-setup all the software, user accounts, special network settings, etc. (even if I do an Archive and Install). Is there anything I can do??? (I seem to recall someone else having this problem, but I can't find that thread on the forum).

There's another thread describing this same problem. I am having the issue too. As I posted in the other thread:
"Well, I did a full Archive and Install, with restore user settings, and the thing still won't print! All apps crash when trying to print (except Mail.app, which is odd). So it appears all of the files required for printing are there since Mail.app works, but I still can't print from Safari, Firefox, Preview, TextEdit, etc etc. ARGH!!!!
Next step is to downgrade to 10.4.8."
If that doesn't work, I guess an Erase and Install would be th next step.

TS3147 Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers! Everything is connected but I get an "idle" message in the queue. I have "Reset printer system" and re-added these printers. No luck. H

Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers! Everything is connected but I get an "idle" message in the queue. I have "Reset printer system" and re-added these printers. No luck. Help?

Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

Printers showing up after Printer Service has been stop or printers deleted

I started setting up the Print service on one of our Mac OS X.5 Servers.
Very simple to do.
At the printer configure and disable all sharing options mDNS, AppleTalk or EtherTalk...
On the server add the printer via IP address and select the correct PPD. In my case I have a couple of the same printer and wanted to setup a print center in a lab. So I disabled all sharing protocols on the server for each printer and then created a Printer Pool...
For some reason the particle printers weren't adding correctly to the clients so I deleted the printers and the pool (not sure in what order I did this).
Now on the client I can still see the Printer Pool and one of the printers from the server even when the service is disabled. The only way they disappear is when I shut the server down or pull it offline.
I found a website that describes this and how to fix it but it's based on Mac OS X.3.x. There must be more steps on Mac OS X.5?
http://macos-x-server.com/wiki/index.php?title=Myprint_queues_behave_erratically,_how_do_I_start_over_and_clear_out_the_oldqueues%3F

I observed the very same behaviour. One more reason not to use Apple's built-in print service.
Try deleting /System/Library/LaunchDaemons/com.apple.printserviceLPR_mDNSxxxxxxx.plist (where xxxxxxx is the name of the print-queue) and restart the server.
Regards
Michael

Printing sapscript label using zebra printer

Hi,
Can anybody please help me regarding "printing sapscript label using zebra printer"?
i hav set the following print default settings in the transaction mb90:
output device :
NO01
device type: YZZX_ZEB
but when i try to print ,i am getting error message stating that "the respective sapscript form is not active ".
i hav also attached my print program for ur easy reference.
====================================================================*
FORM open_form_slv.
*' Description:
*' Add information for the SAP spooler
*' Change the name of the standard customized form for Zebra print
*' Last Change Vers Programmer   Reason
*1
DATA: BEGIN OF print_infos.
          INCLUDE STRUCTURE itcpo.
DATA: END OF print_infos.
DATA: form_name(16) TYPE c, char1(1) TYPE c, ind_beg TYPE i.
PERFORM itcpo_fuellen.
MOVE-CORRESPONDING itcpo TO print_infos.
WRITE sy-datum USING EDIT MASK '__.__.____'
                                           TO print_infos-tdcovtitle+1.
WRITE sy-uzeit USING EDIT MASK '__:__:__'
                                          TO print_infos-tdcovtitle+12.
CONCATENATE itcpo-tddest sy-uname ' PO'(001) ekpo-ebeln ' Doc.No'(002)
                                       mseg-mblnr print_infos-tdcovtitle
                          INTO print_infos-tdcovtitle SEPARATED BY space.
form name from the table YZZM_GR_LABEL
IF NOT g_fonam IS INITIAL.
    tnapr-fonam = g_fonam.
ENDIF.
if the used printer is a Zebra label printer, then the customized
layout set name ???_???_XXX will be changed to ???_???_ZP
SELECT SINGLE * FROM tsp03d WHERE padest = nast-ldest.
IF tsp03d-patype = 'YZZX_ZEB'.
    ind_beg := 15.
    WHILE ind_beg > -1.
      char1 := tnapr-fonam+ind_beg.     " substr(tnapr-fonam,ind_beg,1)
      IF char1 = '_'.
        form_name := tnapr-fonam(ind_beg).
        CONCATENATE form_name '_ZP' INTO tnapr-fonam.
        EXIT.
      ENDIF.
      ind_beg := ind_beg - 1.
    ENDWHILE.
ENDIF.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      device   = 'PRINTER'
      language = language
      OPTIONS = print_infos
      form     = tnapr-fonam
      dialog   = ' '.
x_open := x.
IF mseg-weanz = 0. mseg-weanz = 1. ENDIF.
IF syst-tcode <> 'MB90' AND NOT g_flag_popup IS INITIAL.
check for requirement of printing label and ask for gr-quantities (popup)
    SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln.
    CLEAR yzzm_gr_quantity-no_popup.
ELSE.
and ask not for gr-quantities
    IF syst-tcode = 'MB90'.
      yzzm_gr_quantity-erfmg := mseg-menge.
    ELSE.
      yzzm_gr_quantity-erfmg := mseg-menge / mseg-weanz.
    ENDIF.
    yzzm_gr_quantity-no_popup := x.
ENDIF.
determination inspection lot number
CLEAR qals-prueflos.
SELECT SINGLE * FROM qals WHERE mblnr = mseg-mblnr
                       AND zeile = mseg-zeile
                       AND mjahr = mseg-mjahr.
determination vendor batch
CLEAR mch1-licha.
SELECT SINGLE * FROM mch1 INTO mch1 WHERE matnr = mseg-matnr
                                        AND charg = mseg-charg.
ENDFORM.                    "open_form_label
=================================================================== *
FORM we01_print_slv.
*' Description:
*' print out of hazardous symbol
*' controls the Zebra printer
*' Last Change Vers Programmer   Reason
*****26.09.2007 Starts
DATA: l_objky TYPE nast-objky,"Object key
        l_vstat TYPE nast-vstat. "Processing status of message
*****26.09.2007 Starts
TABLES: mgef, t300.
FIELD-SYMBOLS: .
DATA: aux_index LIKE sy-index.
DATA: count_haz_sym, position TYPE n, zw TYPE p DECIMALS 1.
DATA: aux_value(5) TYPE c.
DATA: txt(10) TYPE c, pos(5) TYPE c.
t001w-werks = r_werks.
t001w-name1 = r_name1.
PERFORM read_address.
*2
SELECT SINGLE * FROM ekpo WHERE ebeln = mseg-ebeln
                              AND ebelp = mseg-ebelp.
CLEAR mara-stoff.
SELECT SINGLE stoff INTO mara-stoff FROM mara WHERE matnr = mseg-matnr.
IF NOT mara-stoff IS INITIAL.
    CLEAR t300.
    SELECT SINGLE * FROM t300 WHERE lgnum = mseg-lgnum.
    IF NOT sy-subrc IS INITIAL.
for plants without warehouses try to use the country code
      CASE mseg-werks.
        WHEN 'BUP'.
          t300-regkz := 'US '.
      ENDCASE.
    ENDIF.
    CLEAR mgef.
    SELECT SINGLE * FROM mgef WHERE stoff = mara-stoff
                              AND   regkz = t300-regkz.
ENDIF.
in case of more then one label, use for each a new output window
(not only for the first)
IF g_count > 1.
    CALL FUNCTION 'CONTROL_FORM'
      EXPORTING
        command = 'NEW-WINDOW'.
ENDIF.
Ausgabe Gefahrstoffsysmbole        Neustadt, V.Hilgert 14.07.98
*For output type YNL7, the hazardous warning symbol has to be printed at the bottom of the label.So label is called before that.
IF tnapr-kschl = 'YNL7'.
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        element = 'LABEL'.
ENDIF.
count_haz_sym = 0. position = 0.
WHILE count_haz_sym = 'XN'.
For output type YNL7, the width of the standard text is small.
      IF tnapr-kschl = 'YNL7'.
        zw = position * '0.2' + '0.1'. pos = zw.
      ELSE.
        zw = position * '1.3' + '0.1'. pos = zw.
      ENDIF.
      IF tsp03d-patype = 'YZZX_ZEB'. " device type for ZEBRA label priter
        aux_value := count_haz_sym.
      ELSE.
        aux_value := pos.              " HP/Kyocera or other laser printer
      ENDIF.
      CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
        EXPORTING
          name   = '&XPOS&'
          value = aux_value
        EXCEPTIONS
          OTHERS = 1.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element   =
          window    = 'MAIN'
        EXCEPTIONS
          element   = 1
          function = 2
          type      = 3
          unopened = 4
          unstarted = 5
          window    = 6
          OTHERS    = 7.
      IF sy-subrc = 0.
*Varying the position for YNL7
        IF tnapr-kschl = 'YNL7'.
          position = position + 2.
        ELSE.
          position = position + 1.
        ENDIF.
      ENDIF.
    ENDIF.
ENDWHILE.
IF NOT mseg-vfdat IS INITIAL.
    am07m-mhtxt = text-105.
ENDIF.
IF NOT am07m-mhdat IS INITIAL.
    am07m-mhztx = text-106.
ENDIF.
IF ekko-bsart = 'UB'.
    am07m-litxt = text-101.
    am07m-libzg = ekko-reswk.
ELSE.
    am07m-litxt = text-100.
    am07m-libzg = ekko-lifnr.
ENDIF.
belpos-mblnr = mkpf-mblnr.
belpos-zeile = mseg-zeile.
CONDENSE belpos NO-GAPS.
am07m-belpos = belpos.
IF t156-shkzg = h.
    am07m-hdlne = text-020.
ELSE.
    am07m-hdlne = text-010.
ENDIF.
Ausgabe der Etiketten mit den ind. Mengen
IF NOT g_flag_popup IS INITIAL.
    SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln
                                          AND   weanz = g_count.
ELSE.
* print the number of labels is handeled by the Zebra printer
IF tsp03d-patype = 'YZZX_ZEB'. " device type for Zebra label prts
g_lbls_tot := mseg-weanz - g_count + 1.
g_break_print := x.
ENDIF.
ENDIF.
mseg-erfmg := yzzm_gr_quantity-erfmg.*
********26.09.2007 Starts
CONCATENATE mseg-mblnr mseg-mjahr mseg-zeile INTO l_objky.
SELECT SINGLE vstat INTO l_vstat FROM nast WHERE kappl = 'ME' AND
objky = l_objky AND
kschl = 'YNL7'.
********26.09.2007 Ends
CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
EXPORTING
name = '&nummer&'
value = g_count.
IF tnapr-kschl <> 'YNL7'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'LABEL'.
else.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'BAR_CODE'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10.
IF sy-subrc <> 0. MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     ENDIF.
ENDIF.
ENDFORM.                    "GR_label_print
*&      Form lesen
      text
     -->OBJKY      text
FORM lesen USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-evers IS INITIAL.         "Versandvorschriften lesen.
    PERFORM t027_lesen.
ENDIF.
PERFORM bestellung_lesen.
IF NOT ekpo-knttp IS INITIAL AND NOT
         ekpo-weunb IS INITIAL.
    PERFORM kontierung_lesen.           "für multikontierte Bestellungen
ENDIF.
IF NOT mseg-ematn IS INITIAL.
    PERFORM lesen_htn.
ELSE.                                                     "111277/PH
    CLEAR am07m-mfrpn.                                      "111277/PH
ENDIF.
IF mseg-matnr IS INITIAL.
    mseg-menge = mseg-bpmng.
    mseg-meins = mseg-bprme.
    PERFORM bestelltext_lesen.
    CLEAR mabdr.
ELSE.
    PERFORM material_lesen.
ENDIF.
PERFORM tab024_lesen.
PERFORM t064b_lesen.
PERFORM ladr_lesen.
ENDFORM.                    "lesen
Lesen für WE-Schein Fert.Auftrag -
FORM lesen_wf USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
PERFORM auftrag_lesen.
IF NOT mseg-matnr IS INITIAL.
    PERFORM material_lesen.
ELSE.
    mseg-menge = mseg-erfmg.
    mseg-meins = mseg-erfme.
ENDIF.
PERFORM tab024d_lesen.
PERFORM t064b_lesen.
PERFORM ladr_lesen.
ENDFORM.                    "lesen_wf
Lesen für Warenausgang -
FORM lesen_wa USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-matnr IS INITIAL.
    PERFORM material_lesen.
ENDIF.
PERFORM ladr_lesen.
ENDFORM.                    "lesen_wa
Druck Vorbereiten -
FORM open_form.
PERFORM itcpo_fuellen.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      device   = 'PRINTER'
      language = language
      OPTIONS = itcpo
      dialog   = ' '.
PERFORM lesen_t159p.
x_open = x.
ENDFORM.                    "open_form
Druck Vorbereiten Sammelscheine -
FORM open_form_sammel.
PERFORM lesen_t159p.
PERFORM itcpo_fuellen.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      device   = 'PRINTER'
      language = language
      OPTIONS = itcpo
      form     = tnapr-fonam
      dialog   = ' '.
x_open = x.
ENDFORM.                    "open_form_sammel
Druck schließen -
FORM close_form.
CHECK NOT x_open IS INITIAL.
CALL FUNCTION 'CLOSE_FORM'.
CLEAR x_open.
ENDFORM.                    "close_form
Hilfsfelder versorgen für Sammelscheindruck -
FORM helpdata1.
   *mkpf = mkpf.
   *mseg-lgort = mseg-lgort.
   *ladr = ladr.
save_mkpf = *mkpf-usnam.
save_mblnr = *mkpf-mblnr.
save_budat = *mkpf-budat.
save_cpudt = *mkpf-cpudt.
save_ematn = *mseg-ematn.
save_lgort = *mseg-lgort.
save_ladr = *ladr.
   *t001w = t001w.
save_werks = *t001w-werks.
save_name1 = *t001w-name1.
   *ekko = ekko.
   *am07m = am07m.
save_lifnr = *ekko-lifnr.
save_ebeln = *ekko-ebeln.
save_ekgrp = *ekko-ekgrp.
save_linam = *am07m-name1.
save_lina2 = *am07m-name2.
   *t024 = t024.
save_eknam = *t024-eknam.
save_ektel = *t024-ektel.
   *mkpf-usnam = old_mkpf.
   *mkpf-mblnr = old_mblnr.
   *mkpf-cpudt = old_cpudt.
   *mkpf-budat = old_budat.
   *mseg-ematn = old_ematn.
   *mseg-lgort = old_lgort.
   *ladr = old_ladr.
   *t001w-werks = old_werks.
   *t001w-name1 = old_name1.
   *t024-eknam = old_eknam.
   *t024-ektel = old_ektel.
   *ekko-lifnr = old_lifnr.
   *ekko-ebeln = old_ebeln.
   *ekko-ekgrp = old_ekgrp.
   *am07m-name1 = old_linam.
   *am07m-name2 = old_lina2.
save_lfa1 = lfa1.
IF NOT old_lfa1 IS INITIAL.
    lfa1 = old_lfa1.
ENDIF.
ENDFORM.                                                    "helpdata1
--- Versorgung der Hilfsfelder vor CLOSE_FORM bei Sammelscheindruck --
FORM helpdata2.
old_lfa1 = save_lfa1.
lfa1     = save_lfa1.
old_mkpf = save_mkpf.
old_lgort = save_lgort.
old_ladr = save_ladr.
old_budat = save_budat.
old_cpudt = save_cpudt.
old_werks = save_werks.
old_name1 = save_name1.
old_mblnr = save_mblnr.
old_lifnr = save_lifnr.
old_linam = save_linam.
old_lina2 = save_lina2.
old_ebeln = save_ebeln.
old_ekgrp = save_ekgrp.
old_eknam = save_eknam.
old_ektel = save_ektel.
old_ematn = save_ematn.
   *mkpf-usnam = save_mkpf.
   *mkpf-mblnr = save_mblnr.
   *mkpf-budat = save_budat.
   *mkpf-cpudt = save_cpudt.
   *mseg-ematn = save_ematn.
   *mseg-lgort = save_lgort.
   *ladr = save_ladr.
   *t001w-werks = save_werks.
   *t001w-name1 = save_name1.
   *t024-eknam = save_eknam.
   *t024-ektel = save_ektel.
   *ekko-lifnr = save_lifnr.
   *ekko-ebeln = save_ebeln.
   *ekko-ekgrp = save_ekgrp.
   *am07m-name1 = save_linam.
   *am07m-name2 = save_lina2.
ENDFORM.                                                    "helpdata2
Form Lesen Warenausgang Lohnbearbeiter -
FORM lesen_wlb USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-matnr IS INITIAL.
    PERFORM material_lesen.
ENDIF.
ON CHANGE OF mseg-lifnr.
    PERFORM read_address.
ENDON.
ENDFORM.                    "lesen_wlb
*eject
Fuellen der ITCPO -
FORM itcpo_fuellen.
IF xscreen NE space.
*- Testausgabe auf Bildschirm -
    itcpo-tdpreview = 'X'.
    itcpo-tdnoprint = 'X'.
ELSE.
    CLEAR: itcpo-tdpreview,
           itcpo-tdnoprint.
ENDIF.
MOVE-CORRESPONDING nast TO itcpo.
itcpo-tdcover   = nast-tdocover.
itcpo-tddest    = nast-ldest.
itcpo-tddataset = nast-dsnam.
itcpo-tdsuffix1 = nast-dsuf1.
itcpo-tdsuffix2 = nast-dsuf2.
itcpo-tdimmed   = nast-dimme.
itcpo-tddelete = nast-delet.
itcpo-tdcopies = nast-anzal.
itcpo-tdprogram = sy-repid.
ITCPO-TDTELELAND = US_COUNTRY.
itcpo-tdsenddate = nast-vsdat.
itcpo-tdsendtime = nast-vsura.
itcpo-tdnewid   = x.
ENDFORM.                    "itcpo_fuellen
*eject.
------------ FORM lesen der Lagerortadr. ---------------------------*
FORM ladr_lesen.
DATA:    BEGIN OF addr_sel.
          INCLUDE STRUCTURE addr1_sel.
DATA:    END OF addr_sel.
CLEAR ladr.
SELECT SINGLE * FROM twlad WHERE werks = mseg-werks
                       AND lgort = mseg-lgort
                       AND lfdnr = '001'.
IF NOT twlad-adrnr IS INITIAL AND sy-subrc IS INITIAL.
    MOVE twlad-adrnr TO addr_sel-addrnumber.
ENDIF.
CALL FUNCTION 'ADDR_GET'
    EXPORTING
      address_selection = addr_sel
    IMPORTING
      sadr              = ladr
    EXCEPTIONS
      OTHERS            = 1.
ENDFORM.                    "ladr_lesen
**&      Form REPRINT
      text
*FORM reprint.
TABLES : nase.
DATA : x TYPE string.
IF nase-vermo = 2.
   x = 'REPRINT'.
ENDIF.
*ENDFORM.                    "REPRINT
Kindly do the needful.
Thanks in advance
Regards
Swarna

Hi Swarna,
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = print_infos
<b>form = tnapr-fonam</b>
dialog = ' '.
x_open := x.
I thing its not a good way to pass the Form name to the Parameter.
Try like,
data : temp_form like tnapr-fonam.
<b>form = temp_form</b>
Thanks.

HT4356 Is there an air print adapter to use on older printers?

Is there an Apple or after market adapter to get a HP 8500 to be able to use air print.

HP has an app that enables printing to some of their wireless printers, if your 8500 is WiFi. Third-party printing apps such as PrintCentral are also available. All such apps have limitations, so check them out thoroughly before you pay for any such app.
For other printers, you can route the printing through your computer. If you have a Mac, Printopia would be worth a look. Fingerprint is another option that is available for both Mac OS X and Windows system. You could also consider an AirPrint-capable print server. Lantronix makes a couple of models, including one that supports a USB printer:
http://www.lantronix.com/it-management/xprintserver/xprintserver-t2.html
Regards.

Can't edit printer list, can't set up printers - Powermac G5, OSX 10.3.9

Hi,
I recently installed a new hard drive to our Powermac G5 and reinstalled OSX 10.3.9. While we had no problems printing previously I can't even install a printer now.
When I tried to print for the first time it automatically detected the Konica Minolta Bizhub printer we have, however it used a generic post script driver.
As soon as I saw that, I tried to install the printer properly, by doing this:
Click system preferences > click print and fax > click set up printers. Clicking set up printers has no effect. Neither does selecting 'Edit printer list' from the drop down menu of printers below.
The generic postcript driver will not work for us because there are certain functions that need to be enabled using the manufacturs driver for it to print properly. Consequently when I try and print it doesn't work.
What I've tried so far:
1)Restarting the machine. No effect.
2)Following some advice on the Apple website I have deleted the Library/printers folder, and reinstalled the driver from the Konica website then restarted the machine. No effect.

A PowerMac G5 running the ancient Panther?
Surely not?

How to print sapscript coding?

Hi friends,
How to print sapscript like form details, attributes and text elements? This is for documentation purposes.
rozie

Hi rozie,
Go through this url it is given step by step process.
APScripts
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
SAP SCRIPT FIELDS
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/8033ea454211d189710000e8322d00/content.htm
scripts easy material
http://www.allsaplinks.com/sap_script_made_easy.html
Debugging Document.
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Rewards some points if it is helpful.
Rgds,
P.Nag

Print Manager Dead - How to Move Printers?

the server holding my Print Manger has died and the printers were associated with the dns name for that printer. I am trying to get the printers to run under a Print Manager on another server (OES11 SP1), but cannot find a way to move them. the Migration/Consolidation wizard requires a connection to the old server. I have moved the Driver Store over, but how can I move the printers to the new server?
TIA,
-L

this thread was moved to
http://forums.novell.com/novell-prod...ml#post2258944
-L

Post 10.5.6 can't print to either of my HP printers

I've got a macbook and macbook air. The MBA is 10.5.5 still and can print to my HP 2600n no problems. My macbook, now running 10.5.6 can't
I've got a 2600n and an Officejet J7500,
Both get errors
pstopdffilter / pstocupsraster err 13 when I try to print.
I've rebooted both printers. I've deleted and reinstalled the printers, no joy.
What's weird is I can see both of them over bonjour, and even see their status and toner levels. just can't print to them. Any thoughts?

Interesting timing on your problem, especially since you can 'see' the printer via bonjour. This is something that would be an easy and worthwhile test...
Many folks have been reporting slow/strange Internet access issues after updating to 10.5.6 and it appears that Apple changed something in their implementation of IPv6. Go into your network preferences and for either your Airport or Ethernet connection, whichever one you use or both for that matter, and under TCP/IP change the IPv6 option from Automatic to Off and see if that fixes the printing problem.
It'll be interesting to see if this does anything for you, as it would help to confirm problems with networking that other users have reported with 10.5.6.
Please let us know what your results are and good luck!

Print report in Thai and English Characters

Hi ,
I able to enter Thai characters from front end but at backend(database) it looks like this '¿¿¿' .someone has any idea why is it so?
Also, I am using some logic to print amount in words in oracle report builder 6i.Our client requirement is to print these amount in words in Thai Characters..Please share your thoughts!
Thanks,
Neha

Don't worry about backend. Change your report builder field as specified font. Report builder automatically converts these special charactors into to actual font you specified. Then you can take output from your report builder.

A question on different zebra printer dpi printing - sapscript

Hello,
We have an existing sapsript (with ZPL code) to print label via a zebra printer (300dpi). There is a requirement to print
the same label on new device zebra QL 320 plus(wireless printer, 203 dpi).
Please advise how to make use of the existing sapscript to print to the wireless device without creating another sapscript(with different dpi).
existing 300dpi ZPL code in sapscript:
^FX
~DGR:ROHS.GRF,2222,22,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
^XA
^PRC
^LH0,0^FS
^LL610
^MD0
^MMT
^MNY
^LH0,0^FS
^FO32,20^A0N,45,45^CI13^FR^FDPART #: 60000001^FS
^BY2,3.0^FO36,66^BCN,56,N,Y,N^FR^FD>:60000002^FS20000001
^FO709,74^A0N,45,45^CI13^FR^FDMSD: 60000003^FS20000002
^FO32,137^A0N,36,36^CI13^FR^FD60000004^FS
^FO32,183^A0N,36,36^CI13^FR^FDMPN: 60000005^FS30000001
^BY2,3.0^FO36,222^BCN,56,N,N,N,A^FR^FD60000006^FS
^FO32,293^A0N,36,36^CI13^FR^FDBATCH NO: 60000007^FS
^BY2,3.0^FO36,330^BCN,56,N,Y,N^FR^FD>:60000008^FS3000000230000003
^FO460,293^A0N,36,36^CI13^FR^FDD/CODE: 60000009^FS
^BY2,3.0^FO461,330^BCN,56,N,Y,N^FR^FD>:60000010^FS30000004
^BY42,42^FO750,300^BXN,5,200,0,0,1^FH\^FD60000011^FS30000005
^FO200,517^A0N,36,36^CI13^FR^FDCOO: 60000012 ^FS
^BY2,3.0^FO36,500^BCN,56,N,Y,N^FR^FD>:60000013^FS
^FO500,460^A0N,36,36^CI13^FR^FDQTY: 60000014^FS
^BY2,3.0^FO500,500^BCN,56,N,Y,N^FR^FD>:60000015^FS
^FO32,399^A0N,36,36^CI13^FR^FDSAP Doc: 60000016^FS20000003
^FO500,399^A0N,36,36^CI13^FR^FDV/CODE: 60000017^FS20000004
^BY2,3.0^FO36,432^BCN,56,N,Y,N^FR^FD>:60000018^FS
^FO30,566^ABN,25,15^CI0^FR^FDDate RECEIVED: 60000019 ^FS
^FO520,566^ABN,25,15^CI13^FR^FDUser:60000020^FS20000005
^FO713,455^FR^XGRoHs,1,1^FS20000006
^FO0,282^GB931,0,2^FS
^FO0,126^GB931,0,2^FS
^FO0,172^GB931,0,2^FS
^FO0,390^GB931,0,2^FS
^FO0,558^GB931,0,2^FS
^XZ
^FX End of job
^FX END OF FORMAT

Hi,
You should generate a new label file and upload it to a new sapscript form as described in note #179534.
Regards,
Aidan

Printing from MacBook Pro 17" Mid 2010 running 10.8.2 ... persistent inability for Apple MacBook Pro to print to a variety of HP printers (have run Windows and Ubuntu on Parallels and same printers work) ... what is going on with Apple printer support?

What is wrong with Apple's support of printers ... inability for MacBook Pros to connect with HP and other printers. Yet the same printers
work under Mac OS based Parallels (running Windows or Ubuntu) - WHY? Finger pointing (HP . Apple ... Apple > HP) ... who cares ... FIX IT ... this has gone on for months now. WHAT IS THE PROBLEM?

HP discontinued support (read: stopped updating their OS X printer drivers) for a lot of their printers back when Apple released Snow Leopard and dropped even more when Lion was released. This is an HP problem, not an Apple problem.
Exacty what printers are you having problems with?
If any of your printers are on the HPIJS list, try installing the HPIJS drivers (there are 3 files to install, and it won't hurt anything). This solved the issue for me on Snow Leopard, Lion and Mt. Lion with my older HP printers.

Printing through Windows on Mac with printers set up on Time Capsule?

I have my printer hooked up to Time Capsule and can print from my Macbook to it no problem. I would like to print from Windows (on my Macbook through Fusion) to the same printer. How do I install that printer in Windows? Do I need to use Bonjour since the printer is already on my network? The printer does not show up in Windows at all right now.
Thanks much

I managed to work through this problem in 2 different installations.
In one case Bonjour did find the printer in the Bonjour Add Printer Wizard(an Epson CX-5000)
In the second case - a Brother MFC-6800 - the printer did not show up as a choice in the Bonjour Add Printer Wizard.
You might check that the drivers for the printer that is attached to the TC are installed on the Windows system.
In this case I know the Brother drivers were installed but they don't seem to support a remote print server set up. However, the Bonjour Add Printer Wizard offered 2 choices - a generic PCL and a generic PS printer. I chose the generic PS printer and that worked....
Printing with a print server - which is what we're talking about here - is something that some printers do better than others. In my experience some printers, particularly their Windows drivers, sort of do their own thing which isn't conducive to playing by the rules which is important with print servers.

Printing SAPScripts in Thai on Hp Printers

Similar Messages

Maybe you are looking for