Printing scanned documents

I am having a problem printing from my scanned documents......when i print a scanned card it prints backwards......all the writing and picture is reversed?
How do i change this ...I tried but got no where

Hi John,
Could you please let me know the function modules .
Right know am using cv120_start_application ,But with this function module I am unable to print the images (Not able to print JPG,BMP and PDF documents)
My requirement is SNP format document will be attached in material master.
Thanks in advance.
Regards,
Kishore

Similar Messages

Printing scanned documents from external system

Hi All
Is there any function module available in SAP which can print the scanned document available in external system.
My requirement is :
They will maintain a reference number of the scanned document in Material master.
so when ever they print the' route sheet' we have to pick the scanned document from the external system based on the reference number and print along with the
' route sheet'.
Thanks & Regards,
Kishore

Hi John,
Could you please let me know the function modules .
Right know am using cv120_start_application ,But with this function module I am unable to print the images (Not able to print JPG,BMP and PDF documents)
My requirement is SNP format document will be attached in material master.
Thanks in advance.
Regards,
Kishore

Print scanned document

I scanned a document on my Epson printer and saved it to my desktop. When I go to print it I get the pop up box to print it as a photo. When I print it the top of the document is cut off. If I uncheck a box that prints to fit frame I get a border around the document which I don't want. What domIndo?

Hi,
If already scanned, use computer to print it otherwise use copy function is much better.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can't print scanned pdf files Xerox 3450 Adobe Pro and Reader 9

I have a user that cannot print PDF's made up of scanned images to a network printer.
The job goes to the printer and spools up but hangs at either 64kb or 255kb and then errors out.
Even if I print just one page, it does the same thing.
Folks with Acrobat Pro 8 or Reader 8 can print the same file to the same printer with no problems.
OS: XP
Network Printer: Xerox Phaser 3450 PS
Adobe: Reader 9.1.3 and Acrobat Professional 9.1.3
I have tried the following:
On the Xerox 3450 PS Printer:
- disabling Advanced Printing Options
- changing Post script options to: EPS, optimize for speed, optimize for portablity
- reloading the printer drivers
- unmapping/remapping the printer on the customer's system.
In the Reader and Acrobat Pro print options:
- print only Document rather than Document and Markups
- print as image
- unchecked 'convert to true type1'
- changed options to Send for each page, send by range,
- tried using Language level 2
- reinstalling Adobe Reader 9
This happens once the customer is upgraded to Adobe Reader 9. If I disable the 'Advanced Printer options' he can print OCR/Text PDF files but cannot print even a single page Scanned image PDF file. The spooler hangs at 255kb and then the print job errors out.
I confirmed this same issue on multiple machines and on other Xerox 3450 printers on multiple print servers. It is the same for Adobe Reader 9 and Adobe Acrobat Pro 9.
The machines and users are in different parts of the country on different print servers but the symptoms are the same: after being upgraded to Adobe Reader 9.1.3 or Adobe Acrobat Pro 9.1.3 they cannot send certain PDF files (so far just scanned image files) to a Xerox 3450 PS network printer.
Any suggestions on what to try next would be appreciated.

This problem plagued me for several weeks, until I found a solution that has allowed me to print scanned documents as quickly as a text document.
I have confirmed this worked on several network X3450 printers using Adobe Reader 9.1.3 and Adobe Acrobat Professional v9.1.3
In the Reader and Acrobat Pro print options:
    Click on the Advanced button and uncheck "Print as image" if it's checked.
    Click on "Let printer determine colors" to enable this option
    Click OK and Print.
After making this change, the document queued up and printed as fast a any text document printed.
I had a single page scanned text document which was about 19 KB, but when sent to the printer, the spooler grew from 10 MB to 50 MB to 80 MB, until an error occurred. Like you I tried many combinations until one worked. Then it was a matter of figuring out which setting was primarily responsible for allowing it to print quickly.
Most likely the problem is with the raster image processor (RIP) within Adobe Reader and Acrobat. By selecting the option to "Let the printer determine colors", it passes that part of the processing over to the RIP within the printer. Since the X3450 is not a color printer, the information is easily converted to grayscale and printed.
I'm still trying to absorb the information in the articles I have read so far, and I welcome any discussion about this from those more knowledgeable than I.
I hope this fix works for you as it did for me. I made a lot of happy customers once they were able to print since most of their documents are scanned rather than created with Acrobat.

I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite. When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error.

I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite. When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error. I am running Mac OS 10.10.1. This only started happening when I installed the update of Adobe Acrobat.

Hi MEW1,
Is the printer connected wirelessly or wired?
Go to Preferences and under categories go to > Convert to Pdf then select the Image Capture and then hit ok button.
Close Acrobat and then relaunch it and see if it helps you while you do scanning.
Regards,
Rave

CreatePDF Desktop Printer will no longer be available so how do I print a PDF from a scanned document????

CreatePDF Desktop Printer will no longer be available so how do I print a PDF from a scanned document????

Hi jwlaunch,
This document describes some alternatives to CreatePDF Desktop printer: Adobe CreatePDF Desktop Printer is no longer available
Please let us know if you have additional questions.
Best,
Sara

I have a MacBook Air (10.8.2) connected to Canon MP530 printer. I'm unable to scan documents as MP Navigator is not supported. Any ideas on how to scan using this printer.

I have a MacBook Air (10.8.2) connected to a Canon MP530 printer. I am unable to scan documents as it appears my Mac does not support MP Navigator. Any ideas? I have made an inquiry to Canon but have not received any answers yet.

Why do you say your MBA won't support it? MP Navigator for OS X 8 and the MP530 is available here.

I can not print document but I can scan document

Hi
I have HP PAVILION N278SA model laptop and I have HP F4100 series all in one printer and using many years. I was printing some documents. I printed off one document from one of my email . Then when I clicked other email and wanted to print other document which was not attached file. My laptop gave 'printer is off line' sign, since then I tried many word documents from my laptop or other email documents but I could not print off any of documents. When I want to scan a document, the printer let me scan the document. The scanning is not problem. My printer connected to my laptop via usb cable and also plugged in via cable on wall. I switched off printer few times and disconnected from my laptop around 30 seconds but it did not work.
I also went to 'devices and printers then click default printer which is F4100 series then open printer window.Then I went to 'what is printing' part then click print and start but did not work either. the printer does not print test page
Thank you for your support
Numan Ozpay

Hi,
Try following the tool below by selecting Fix Printing and check if that may rewsolve the problem:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
If that doesn't help, power off the printer and reboot your PC.
Next open Devices and Printers and select See what's printing for the printer.
From the Printer menu click on Cancel All Documents and ensure the print queue is clear, then turn the printer on again and try printing.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do I send a scanned document from my 5520 e printer to an e-mail contact

how do I send a scanned document from printer to e-mail account (5520 e-all-in-one series

Hey Storm46,
The answer to your questions is: YES.
To do so:
Set up a custom email for the printer through the HPConnected.com website for your printer. For information on how to setup ePrint click here.
Get the Scan-to-Email app for the Photosmart 5520 through the HPConnected website
Set up this feature and it will provide you the ability to scan a document and email it from the customized email for the printer
Scan an item and send it to your personal email
Hope this helps,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Canon Printer MG5420. How can I save a scanned document in the Word format?

I can only find the option to save scanned documents in the PDF format. I want to know if there is a way to save in Word. Can anyone help me? Canon Printer MXZ5420.

Hello Yvonne.
Specialized OCR software may be needed in order to save files directly to Microsoft Word format. Our software does not have this capability.
If you are attempting to scan a basic, text-only document. You can use our IJ Scan Utility to scan and make adjustments.
1. Start, point to (All) Programs, Canon Utilities and then open the Canon IJ Scan Utility.
2. Click 'Settings' on the lower right corner.
3. Click 'Document Scan' on the left.
4. Under 'Application Settings' on the right, select 'Start (OCR)' and choose 'Canon My Image Garden' in the menu.
5. Click OK.
6. In the IJ Scan Utility, click 'Document'.
When scanning is completed, Notepad will open and you will be able to edit and save your document.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Scanned document printing too small

Hi,
I'm using Mac OS X 10.4, Epson 1660 Photo Scanner and Epson TWAIN (via Photoshop). I'm scanning a document for print, yet no matter what dpi I choose, the document prints out very small on my Canon i850 inkjet printer. I've wasted about 10 pages printing out various versions. Any insight!
Thanks,
Michelle
PS- if this is the wrong forum for this question and anyone can point me to some good printing/scanning forums on the web, please do so!

Figured it out - missed the "scaling" feature in TWAIN.

HT1338 Is there a HP Photosmart printer driver update 12.16.1 that supports OS 10.7.5 that will allow me to scan documents with OCR? If so where/how do I download or get it? Thanks

Sorry, I meant to say Apple printer driver update 2.16.1 for OS 10.7.5. Is there a HP Photosmart printer driver update 2.16.1 that supports OS 10.7.5 that will allow me to scan documents with OCR? If so where/how do I download or get it? Thanks
<E-mail Edited by Host>

Hi pmaragoni,
I understand that you are looking for an updated driver for your HP Photosmart printer. Here is a link to the updated drivers from Apple for HP printers.
LINK: http://support.apple.com/kb/DL907
I hope this helps,
Advance 23
I work on behalf of HP

I'm getting a "printer error" message when I try to print a document with a lot of scans in it. Any suggestions?

I'm getting a "printer error" message when I try to print a document with a lot of scans in it. Any suggestions?

OK, I tried a few things, and I do not understand the results.
1) I opened the document in Preview, and it would only recognize the three initial pages which I typed using the Pages App. It did not recognize the bulk of the text which I copied from Appleworks 6. It also did not recognize any of the scans.
2) I tried opening a pdf in Preview, and it would only recognize the scans. (No Text!)
3) I tried copying everything (select all, and command-c) in Pages, and then opened a blank Pages doc, and typed Command-v. This got me all of the text, but none of the scans!
4) I was worried that my Pages app might be corrupted, but I successfully converted a similar 78-page document with copied materials from Appleworks 6 and similar scans, ant this worked perfectly.
My conclusion is that my file must be corrupted. Is there any way to check this? shabda88

Problem printing scanned PDF document from iPad to HP Photosmart Plus B209a

Hi,
I'd like to report a problem printing a scanned PDF document from iPad via HP ePrint application to my HP Photosmart Plus B209a printer. The document was sent to the printer without any issue. However, the printer only prints out the
screenshot image in the center of the PDF page, and the image is enlarged and rotated to fit in an A4 paper. The rest of the document is simply ignored by the printer. The document with the problem can be downloaded in the link below:
Download PDF document with the problem
What could be wrong? Thank you in advance!

Thanks for the reply.
I received the document from my teacher, so I don't know what program she used to scan it.
I tried to print the document directly from my PC which works fine though, so I guess the document is OK.
My HP printer is an old model which doesn't support eprint or air print, so I used the eprint application on iOS to print the document. I tried both color and black/white which gave me the same result: only the center screenshot image is printed out, and the image is enlarged and rotated to fit an A4 paper, the rest of the document is just ignored.
What do you mean by saving it as a document?

Acrobat Standard Won't print first 1/2 page of scanned document

I have a previously unseen problem. I've had the program for a few years, but now it won't print the top half of the first page of a scanned document (some of them). I tried to print something I scanned a few weeks ago, and it works fine. That one's also in color. The ones that won't print fully are black and white. Any ideas?

You're going to think this is impossible, but the problem only seems to occur with a couple of particular documents I was scanning. I tried deleting the file, rescanning and resaving, then printing with the same 1/2 page result. I tried scanning, saving, and printing a couple of sample documents (thinking I would send one of these to you), and there was no problem! After multiple attempts with the problem document, I fed it through the document feder backwards, and then it scanned, saved, and printed with no problem.
I'm using a Brother MFC-J6710DW printer, Windows XP Pro, Acrobat Standard 7.0. I've actually tried to update Acrobat, without success for some reason. The actual problem document is too sensitive for me to send out. I'd like to hear ideas, in case this repeats.
Thank you.

Printing scanned documents

Similar Messages

Maybe you are looking for