Printing scripi on both side  of paper

Hi All,
I want to print script on both side of paper.
my observations.
the output device they are using it prints report on both side of paper.
in script , processing mode selected D  and i am printing dunning letters.
in main program used NEW-PAGE. that should not make any difference.
let me know from script side what i have to do and also from my device type what else i have to check.
urgent
Regards
Gopal

hi,
  We can print both sides of the paper
<b>You switch to duplex or tumble duplex mode with a form page for which one of these modes is specified. To continue printing in the current mode, for follow-on pages you must define another page in which the Print mode field is empty. Otherwise, the following pages after the mode switch will continue to be printed only on the front sides of new sheets of paper.
The reason: When SAPscript sends a page with Print mode D or T to the printer, it not only sets the print mode accordingly. To ensure that the first page in the new mode is correctly output, SAPscript also instructs the printer to output the page on the front side of a sheet. If SAPscript sends a sequence of D or T pages to the printer, the output is printed only on the front side of each sheet.
You define a first page named FIRST for a form to be printed in duplex mode. You therefore set the Print mode in FIRST to D.
To make the duplex printing work correctly, you must define a second page FOLLOWER in which Print mode is left empty. In the form definition, you specify FOLLOWER as the follow-on page for FIRST and for itself as well.
Your text is then printed in duplex mode. FIRST switches the printer to duplex mode and forces printing of the first page on the front side of a new sheet. FOLLOWER accepts the duplex mode and sends no further mode print controls to the printer. The printer therefore alternately prints FOLLOWER pages on the fronts and backs of sheets.</b>
The print controls that must be defined for a device type depend upon the SAPscript printer driver that is to be used with the device type.
set the followint print control.
<b>SPMDU</b>
Begin duplex printing (both sides of paper). (Needed only if supported by device.)
<u><b>follow this link it will help.</b></u>
http://solutions.brother.com/Library/pdf/SAP_install_latest.pdf
http://wiki.ittoolbox.com/index.php/HOWTO:Sap_script
regards,
AshokReddy.
Message was edited by:
        Ashok Reddy

Similar Messages

  • How can i print on the both sides of the paper on printer 5520

    how can i print on the both sides of the paper on printer 5520 when printing too many papers?

    Hi hamad5520
    I have included a document for two sided printing.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03476083&lc=en&product=5157536&tmp...
    Hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How do I get my macbook OS X 10.5.8 to print both sides of paper with HP Officejet 6000 wireless

    How do I get my macbook OS X 10.5.8 to print both sides of paper with HP Officejet 6000 wireless?

    If it has that available, when the Print Dialog comes up, click on Copies & Pages, choose Layout, look for 2 sided printing... some Printer Drivers may have it under abother heading.

  • HP officejet 4630 won't print on both sides of paper

    Cannot print on both sides of paper. The backsideprints first, then wait for ink to dry, front side starts to print then stops with a windows error message popping up on screen saying cannot print document.
    I have found that I cannot print multiple pages either. For example, I decided to print the 4 page document as single pages only (since double sided wouldn't work) and the results were first page prints second page prints about a third and then all stop with error message that printer cannot print the pdf document. so I had to select each page seperately to finnally get all four pages printed. HP print and scan diagnostics says theres is no problem. Windows diagnostics says there is no problem.
    Obviously there is a problem can any one offer advice and solution?
    Thanks
    Kimoho
    This question was solved.
    View Solution.

    Hello Kimoho,
    Could you please check to Duplexer unit seem installed on printer properties and in the printing preferences section is it selected to print on both side.
    If its not seem installed, adjust to it installed and try again.

  • How do I print to both sides of paper for greeting card on Brother Printer

    I did not find the answer on the forum. I have iLife 09 and this Brother MFC-790CW printer. I do not see any automatic setting for printing on both sides. I am using a iPhoto greeting card template and it looks OK with a page one for the front and a page two for the back.
    Maybe the only way is to print out all the fronts pages (20) and then put the paper back in and print all the pages 2 (the text inside of the card). That seems like it would be faster than other ways, except automatic.
    Obviously I should have done this a month ago and sent the project to Apple, but now I have no more time. Ii have the right paper for the one fold cards and plenty of ink

    You need to have an image editor that supports layers. If you do follow the directions in these tutorials:
    #8 - Printing a iPhoto Greeting Card
    #8a - Printing a iPhoto Greeting Card to Standard Stock Sizes
    Here are some editors that support layers:
    Some Image Editors that support layers:
    Photoshop Elements 8 for Mac - $79
    GraphicConverter - $45
    Rainbow Painter - $30
    Acorn - $50
    Pixelmator - $60
    Seashore - Free
    Portraits and Prints - Free
    GIMP for Mac - Free
    You might be able to use Pages instead of an image editor.
    Happy Holidays

  • How to print on both sides of paper

    I have HP 3050A wireless printer. How to print on both sides of paper

    This printer does not do auto duplexing. The only way to print on both sides of the page is to print one side, put the paper back in manually, and then print the next page. If you have something say 10 pages long, you can also print only odd pages, then only even pages tospeed it up.
    Jon-W
    I work on behalf of HP
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

  • 'Print on both sides of paper' in Adobe Reader 10.1.2 + DFS shares....

    Hello
    After the latest update a new print dialog is available which includes the option to 'Print on both sides of the paper'. Our printer (available via a print server in a Windows domain environment), is capable of printing duplexed copies of documents but is configured to default to not use duplex. When the option to do this from the Adobe Reader print dialog is selected the printer driver overides it and the document is printed normally (not duplexed).
    Is there a way to hide this option? We often need to print duplexed copies of documents but usually set it in the print driver when it is needed. Because the option is being overidden it has the potential to create an enormous amount of wasted paper and toner and will increase our printing costs.
    Also, when V10 was released, trying to open pdf's located in DFS share paths caused the program to hang. The solution was to disable protected mode. I tried enabling protected mode after this update (and previous updates), and restarted the application but instead of hanging, Adobe Reader now displays a message box stating:
    There was an error opening this document. Insufficient system resources exist to complete the requested service.
    If I disable protected mode and restart Adobe Reader the document can be opened.
    Any help appreciated.
    Thanks!

    Hi, Shatik
    Thanks for replying.
    The DFS shares are mapped as a network drive. This is done just once using a batch file that uses the persistent switch. No roaming profiles, no username\application data path.
    Since posting this I can now access PDF's, but many of our staff are now unable to scroll through an entire pdf without Adobe Reader hanging. Again, removing the checkmark in the protected mode option allows full scrolling of a pdf.
    Disabling/enabling antivirus real-time scanning makes no difference.

  • How I can print on the both sides of the paper on printer P2055d

    Can printer P2055d print on both side of the paper? How I turn on duplex? I do not have a manual.

    Hi hamad5520
    I have included a document for two sided printing.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03476083&lc=en&product=5157536&tmp...
    Hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Print on both sides of paper

    print on both sides of paper

    Hi,
    Based on the following link, under "Paper-handling specifications", it does not have a duplexer:
       http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?prodSeriesId=4322968&objectID=c0305889...
    It can't print both sided (or duplex) automatically.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Printing both sides of paper

    How to I get my HP Laser Jet 200 color printer to print on bothsides of paper.
    what is the set up procedures?

    Hi Jim11:
    The HP LaserJet 200 does a manual duplex, meaning that you have to print the first side and then reload it into the paper tray manually to print the second side. Here's a link to the post where it has been solved, and encourage you to look at the manual (pages 25-26) that show how to select duplex from the print screen and how to manually put in the paper when printing on the second side.
    Here's the link for the forum post: LJ 200 manual duplex process
    Regards,
    FirstTimer01
    FirstTimer01
    I am an HP employee

  • Hp deskjet 2050 j510 print on both sides of paper

    I cannot seem to find the setting to print on both sides of a page. Using a mac book pro and an hp deskjet 2050 j510. Please help!

    Hi @kryssy2313,
    Thank you for visiting the HP Support Forums! I see you are trying to print on both sides of the page on your HP Deskjet 2050 from your Mac running the 10.5 Operating system.
    Please get started here: Changing Print Settings in Mac OS X
    I hope this helps!
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Copy problem with HP Officejet Pro 8600-always copys on both sides of paper

    When I want to make a copy of a document, i.e., insert the document on the glass surface under the printer cover, I touch the copy function on the printer and the printer always makes a copy of the document on both sides of the paper.  I do not know how to change the printer setting(s) in order to have a one sided copy feature.

    Hi,
    From the printer front panel click on Copy.
    Click the Two Sided button and select "1 sided original - 1 sided copy".
    Next click the Settings button, select Set as New Defaults and confirm, now 1 sided copy will default for any copy job.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Printing on the both sides of page

    Is there any way I can print through Java on the both sides of page? ( I mean duplex way).
    I have pdf document generated through java and I have this requirement to print some of the docs on both sides of page. Could anybody help please.

    you need to check the hardware api and send the correct command to the printer

  • How to print smartform on both side of pages.

    Hi,
    I have requirment of printing the smarform on both side of the page. for example the header data and item date on front of the page and terms and condition on the back of the page... can anyone help wht printer settings and wht changes in the smartform needed... its very urgent pls help ASAP.
    Thanks in advance.
    Abhishek Pandey.

    Hi Abhishek,
    In PAGE node u have Output Options Tab.
    In Output Options U can find the field Print Mode
    There u need to give the D.
    Default: No change of print mode
    S Begin new page in SIMPLEX mode (single-sided)
    D Begin new page in DUPLEX mode (double-sided)
    T Begin new page in TUMBLE DUPLEX mode (double-sided)
       DUPLEX:
         The current print mode is set to DUPLEX (double-sided print, long-edge
         binding) and a new page is started. A form page defined with DUPLEX is
         always printed on the front of the page, never on the back of the page.
         If the next form page contains the attribute value DEFAULT, it is output
         on the back of the page.
    Best regards,
    raam

  • Hp printer cuts off right side of paper

    Hello,
    I am new to this but I have a problem that needs to be answered pretty quickly please, when I try to print out an email the right side of the email gets cut off, I checked the printer setting and even the preferences but everything is alright, nothing wrong there, but every time I print I happens. Also when I go to print out a picture the picture turns out yellow, please I tried everything I could think of.
    This question was solved.
    View Solution.

    Hi - Can you provide the model of printer you're using?  That will help determine what steps to take to troubleshoot.  Typically though, when the print out is being clipped or cut off, it has to do with a paper size mismatch between the printer driver software and the settings in the software you're using (i.e. MS Word).  Make sure that the paper size settings in the sw (typically under page setup) match those of the printer (typically under printer setup).
    As for the color issue, the first step will be to run a self test page on the printer to determine whether it is an issue with the ink cartridges.  How to run the test page from the printer is dependant on the printer model.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

Maybe you are looking for