Printing setting job log - can't save settings.

Hi, this problem's been around some time with my printing settings.
I am attaching the my setting image as below.
User ID & User Code when printing Color from my computer is '100109'.
I want to permanently save this numbers.
However, every time I try it appears as '100108'; may be my previous setting.
How can I save it as '100109'?
Thanks in advance for the help.

Your image shows that you are using the Presets menu. If the Preset of Color has been saved with a particular User ID/User Code (ex 100108), then delete this Preset and create a new Color preset using the number you want (100109).
To do this, with the Color preset selected, click on the Presets drop menu and select Delete. Then, change to the Job Log menu, enter your 100109 User ID and Code, and then click on the Presets drop menu again and select Save As. Give it the name of Color and click OK.
Now when you print and select the Color Preset, the Job Log menu should show the 100109 User ID & Code.

Similar Messages

H/P Printer completed jobs Log

I have an HP E6500 wireless printer that appears to have two corrupted entries in it. Does anyone one know how to clear the completed jobs list without removing the software completely? HP as usual is of no help.

Oh Boy. I thought you got it with the address! I typed it in and it let me see active (albeit stuck) jobs list (2). But, it won't let me do anything with them, although it show an ability to remove them. Then I looked at the second part of your post (system prefs, etc), but that is what I've been trying to work with all this time. It shows me a completed jobs log. That's the rub. I'm trying to remove the files from the completed jobs file without uninstalling the software (AGAIN! thank you HP!), and reinstalling the software. There are three jobs listed there that I didn't attempt to print , and it appears that they are causing errors, delays etc. The errors, signigicant delays, and other problems began when they showed up (I think in a virul email). I can highlight everything but those three, but I cannot remove anything. I'm suspicious about those three specifically because I didn't put them there, and I cannot highlight them (or anything else). Is the bompleted jobs log stored in my hard drive, or on the printer? (and, if you know, where).
Thanks for taking time
Ron

I lost my printer set up. Can I restore it from Time Machine?

I accidentally lost my printer set ups and need to restore them. Can it be done from Time Machine?

If you don't know what they are, you'll need to go the printer manufacturer's website and check the drivers for your printer. It will then be far the easiest thing just to download them from there.

Canon Printer MG5420. How can I save a scanned document in the Word format?

I can only find the option to save scanned documents in the PDF format. I want to know if there is a way to save in Word. Can anyone help me? Canon Printer MXZ5420.

Hello Yvonne.
Specialized OCR software may be needed in order to save files directly to Microsoft Word format. Our software does not have this capability.
If you are attempting to scan a basic, text-only document. You can use our IJ Scan Utility to scan and make adjustments.
1. Start, point to (All) Programs, Canon Utilities and then open the Canon IJ Scan Utility.
2. Click 'Settings' on the lower right corner.
3. Click 'Document Scan' on the left.
4. Under 'Application Settings' on the right, select 'Start (OCR)' and choose 'Canon My Image Garden' in the menu.
5. Click OK.
6. In the IJ Scan Utility, click 'Document'.
When scanning is completed, Notepad will open and you will be able to edit and save your document.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Can Enery Saver settings affect performance in iDVD

Hi,
I would like to know if changing the settings in Energy Saver in System Preferences will result in iDVD encoding taking MORE time and thus save on processor heat etc, thus allowing me to fully encode a slideshow and its transitions without the iDVD quitting unexpectedly?
I notice when I encode using BEST PERFORMANCE that I get the encoding to go further than when I choose PROFESSIONAL QUALITY.
Many Thanks,
James

allowing your system's hard drive to "sleep" while encoding an iDvd is simply NOT recommended regardless of the fact it may be less CPU intensive. Yes it produces less cpu heat BUT it also makes for a greater number of read / write errors each time you allow the HD to enter sleep mode and the transition in and of itself can trigger the application to quit.
It's best to set these energy saver controls to "Never" while encoding. The only exception is allowing the display to sleep while encoding which can safely be performed while encoding. However my personal preference is to set EVERYTHING to Never and simply turn off the display as it encodes.
Message was edited by: SDMacuser

Can't Save settings in Web Service

Strange: Recently, I neeeded to change a few trivial things in the Web Service. But when I click Save, the list of Sites disappears, and if I click back on the Sites button I see that the change I wanted wasn't saved. It doesn't matter what I change -- any setting for any site in Web Service is not Saveable.
Anyone else run into this? Know of a way to solve it?
...Rene

Yes, thanks. I've been editing httpd.conf anyway, and whenever I run apachectl configtest, there are no problems with the configuration. So I know that what I've done is okay, and shouldn't cause Server Admin to refuse to cooperate -- but for some reason it does. I mean, at this point, I can't use Server Admin at all for the Web Service, which is starting to make the Xserve feel like nothing more than a pretty Linux box.
...Rene

New WRT54GL: can't save settings!! (firefox, chrome ..)

Hello,
I bought a new WRT54GL (v 1.1)
Problem: I can't make any changes in the settings, using the webbased configuration.
everytime I click apply/save, I get a blank page saying:
The webpage at http://192.168.1.1/apply.cgi might be temporarily down or it may have moved permanently to a new web address.

Are you trying to make the changes on your router from a Wired computer or Wireless Computer? What settings you are trying to change on your Router? Have you tried from a different computer and checked if you are facing the same problem or not.

HT204135 I have a Brother Printer 465CN model and I want to get it to work with my hard-wired Mac Pro via a connection to the network at home with Ethernet Cables run through my router. I cannot get the Brother Printer to print any jobs. Can anyone help

I am running OS X Lion, by the way. Could anyone provide support due to a similar situation that may have happened to them or they have experienced with their MAC?

kikuyujen wrote:
Could anyone help me find an article called Switch 101 that helps people converting from Windows to Mac.
Just Googled "Switch 101."
http://www.apple.com/support/switch101/

How can I save zoom setting for a DOCUMENT so it opens at that setting?

I find an optimal zoom setting for a document I'd like to use (say 42%) and want the document to open at that setting. I save the document with File>Save Copy. However when I open the document, it opens at the DEFAULT zoom setting set in the Preferences for program. If I change the zoom level here to what I desire for that document, obviously all documents will open at that default setting.
How can I save my desired zoom level for a document, which will most likely be different for EACH document, and have the saved document open at that setting?
This seems like a trivial exercise / feature that should be easy to implement BOTH by the programmers of the software and the user setting the zoom level.
Also, I want to suppress the bookmarks sidebar. I save without the bookmarks but the documents opens with the side bar. Can't THIS be set for each document?
Why is it so difficult to tailor the viewing of a document to exactly what the viewer wants?

OK. Sorry for the mistake in posting the question here.
Again it seems like it should be trivial to save a document in the Reader with a viewer's desired zoom setting. I find this very helpful as I like to use a zoom setting that when scrolling down the document only one full page of the document is viewed (like turning the pages of a book). Without this feature, partial pages are displayed when scrolling unless one experiments to find the correct zoom setting (often it is 60%). One must do this every time one opens the same document, unless one remembers the zoom setting.
Oh well ....

Unable to save settings in mail app for Mac OS X for iCloud mail?

Hello
I have two questions really.
1: I wanted a new email address, was happy to see I could create an iCloud email address - but it seems you need an initial email address to have an iCloud email address. As in, I couldn't use it as my apple ID?
2: I cannot save settings for my iCloud mail because the incoming server is 'greyed out' and the mail app identifies this as the incoming server being blank which it isn't, but I cannot edit it as the 'greyed out' font is locked and unchangeable. Apple state that the incoming server should read as:
Server name: imap.mail.me.com
But mine reads this and it won't let me change it. Other wise the email works, but I do need to adjust the settings etc and I can't because the incoming server is apparently blank when it isn't.
Server name: p09-imap.mail.me.com
I hope this made some sense to someone. I simply wanted a new email address and it's taken up the best part of an afternoon.
Thank you.

Problem Solved(ish)
I had to Apple chat, iCloud is set a certain way, and that's it.
They edited my full name FOR ME (I know).
Password is made to match your Apple ID, so that's how to change that.
As for Mailbox behaviours, as I said above - On the left side bar of Mail app, right click or Command Click under Mailboxes iCloud.com and select Get Account Info then> Mailbox Behaviours. Your settings will save then without the whole 'Can't save settings when incoming server is blank.'
I hope Apple will soon make that if they must have an auto-filled Incoming Server, that the Mail app will not recognise it as blank so that we can at least edit Mail preferences when and how we like it.
Thanks.

How can I save my contact sheets in Photoshop Lightroom?

How can I save my contact sheets in Photoshop Lightroom? I see that you create the sheets under the Print tab but how can I save them as jpgs to my desktop?

Kittie,
I use this workflow and it works really well for me; it's really strange that it
i did
work for you and now it doesn't.
I had a quick dabble and
i may
have an explanation. If I read your error message it looks like "New Folder" is trying to create a folder ~kittie/Desktop/3 Working/Contact Pages. However, the automator "create folder" won't create folders recursively like that - it will only work if "3 Working" already exists. Certainly I was able to reproduce the 'quick flash error message and bomb out with no results' effect by asking it to produce a directory from one that didn't already exist. When I added two Finder actions it didn't work as I expected - producing 74 files in subdirectories that just looped round and round when I expected one file and one directory.
I added a shell script that renames the files too and it all works just dandy for me. If you let me know your e-mail I'll post the automator "app" file and shell script I use. It gives you sensibly named files instead of the sdkjfdfadkljfb.jpeg thing that comes out of automator.
Damian

How can I set the default print settings of my document as color. I want the default print setting to be color when someone opens a document. similar to duplex print preset is there a color print preset?

How can I set the default print settings of my document as color. I want the default print setting to be color when someone opens a document. similar to duplex print preset is there a color print preset?

Hi,
Try saving your settings as a Preset by clicking the Preset drop down and then select Save Current Settings as a Preset.
Next try changing the settings by selecting the saved preset.
That allow saving the settings for a specific printer, I assume it may also allow selecting these settings for another printer.

TS4009 my ipad wont log in it says this ipad cannot be backed up because there is no enough icloud storage available. you can manage you storage in setting. but i cannot go to settings

my ipad wont log in it says this ipad cannot be backed up because there is no enough icloud storage available. you can manage you storage in setting. but i cannot go to settings.. and i can not turn it off and i can not log in

If your iPad is frozen and unresponsive, reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

Can't save location for Trash at Server Settings (IMAP setting).

Hi,
I'd like to set a folder (one under an account name) to move messages to when deleting messages with IMAP.
I can't select Trash under an account name at Server Settings. I can only select Trash under "Inbox" under the account name.
I find that the folder settting was not saved at all. Folders settings for sent messages and drafts are OK.
How can I save a folder setting (one under an account name) for deleted messages ?
I guess this situation results to 2 Trashes (one under the account name and oner under "Inbox" under the account name). In fact, I have a trouble deleting Trash under "Inbox" under the account name.
Thanks in advance for any advices or clues for the solution or workaround.

(addition to the question)
To be exact, folder selection pull-down menu doesn't start with the account name, rather, start with "Inbox", therefore, I can only choose Trash under "Inbox".

How can I save a Adobe document to print duplex for other users.

I want to create a doc using Adobe and be able to set it to print duplex by other users without the user needed to go into printer settings.
All the user has to do is click print on there computer and the doc. will print duplex. The users have Adobe Reader installed.

It is possible to set a default value for the Adobe Reader or Acrobat print dialog on a document basis. After the document is created, go to Document Properties (Ctrl-D), and select the Advanced tab. Go to the DuplexMode setting. Normally, this is set to Simplex, i.e. single sided printing. You can also set it to either Duplex Flip Long Edge or Duplex Flip Short Edge depending upon your needs. Duplex Flip Long Edge is normally used for printing of “portrait” orientation content with Duplex Flip Short Edge typically used for printing of “landscape” orientation content. Then save the PDF file (typically, “save as” should be used).
Important notes: Obviously, this only works if the PDF file is being opened by one of the applications that even bothers to look at these settings. Adobe Reader and Acrobat do. Don't count on MacOS Preview or other applications to do so! Furthermore (and somewhat obviously), this setting is only observed with print devices that directly support duplex printing. And finally, this does not force the user to print duplex. It simply pre-populates the print dialog; the user can change the setting.
- Dov

Printing setting job log - can't save settings.

Similar Messages

Maybe you are looking for