Printing Shop floor documents

Hello Experts,
Is it possible to print the shop floor documents in production order status CRTD ?
If yes what are the settings to be done to get printing before releasing the order?
Regards,
Jejesh
Edited by: jejesh yal on Jan 27, 2009 6:47 AM

Hi,
As per Standard SAP Practice, It is not possible to print shop floor papers befere release of Production Order i.e. It must have status REL and not CRTD.
You need to maintain following settings for Printing Shop Floor Papers :
In OPK8
Name of the list - LG01, LG03, LK02, LV02
Spool parameters - User and plant = *
Reference operation - type - *, ref order = your order type
Forms -
LG01 - PSFC_OBJECT-LIST
LG03 - PSFC_ZUGL-LIST
LK02 - PSFC_GOOD-ISS-SL
LV02 - PSFC_CONF-TICKET
Print Programme -
LG01 - PPPROBJU
LG03 - PPPRZUGL
LK02 - PPPRWARS
LV02 - PPPRRUEC
List control for transaction
ref order type, plant, MRP controller-*
transaction codes - CO01, CO02, CO03, CO04, CO05, CO07
Flow control for transaction - all are online
Hope this helps.
Regards,
Tejas
Edited by: Tejas Pujara on Jan 27, 2009 6:55 AM

Similar Messages

CN22 - Print Shop Floor Papers for Network Orders

Hi All,
We are printing shop floor papers for network orders - the printers are setup, configuration is working fine.
However, there is a sporadic error: when we select "Print" and then "Save" in CN22, the system pops up a window with the list of all network activities. However, for some reason, the first time this is done, only a few network activities appear on the list. If we close the pop up, then select "Print" and then "Save" again, the whole list appears. Has anyone encountered this before? I looked through OSS, but couldn't tell if any of the notes would be applicable to resolve the issue.

Hi,
I just went through the same problem. Don't know if it is still open.
In customizing under "Project System"->"Structures"->"Operative Structures"->"Network"->"Printing in Networks" you will find entry "Recommendations for printing and print control". There it is stated that the number of time tickets or number of confirmation slips entered for the activity is greater than zero.
Check in transaction OPS0 if you have set the number of prints greater than zero in menu point "List control for transactions (double clic on the entry).

PM: Printing Task List Attachments When printing Shop Floor Papers

Hi,
We have PDF documents attached to our PM Task Lists. My requirement is to print out these PDF attachments when the shop floor papers (ie Maintenance Pick List) print. I am able to determine each of the files and their paths attached to the task list, but as of yet, I am unable to automatically print them. Can anyone point me in the right direction?
Also note that using OLE to print the attachments seperately is not an option - The reason for this is that the shop floor papers would go to the SAP Spooler and the attachments would go to the network print server.
Thanks!
Scott

In transaction OPK8, in forms uncheck the 'New List' check box for the List.
Regards
Ramanujan

Printing shop floor papers

Can anybody explain me how to see the print preview of production Order, Goods receipt (for MB31 transaction), Confirmation slip in Production Planning?

Hello Srinivas,
One of the way I could think of is setting the print mode as 'background processing' and the checking the print preview in spool request (Tcode : SP01).
Cheers
K

Print out of Shop Floor Papers in Default Language

Hi Folks,
User has a requirement to Print Shop Floor Papers in German language only irrespective of log on language.
He does not want to manually select the German language in IW3D, as it picks the log on language. He wants it to be set as German language (DE)
Please suggest.

Hi,
You can try to put DE as default login language for these users in SU01 , then by default printing will happen in DE by default ..
regards
pushpa

Creating single spool request for printing all shop floor papers

Hello PP Gurus,
We are printing shop floor papers at the time of releasing production order using txn CO02. It creates individual spool request for printing different shop floor papers in the same orders . eg Pick list, goods receipt list etc.
Is it possible to do the cofiguration setting to create only one spool request for all the different SF papers belong to same order.? If yes, please let me know the steps for customising this.
Thanks for your help in advance.
Regards & Thanks
Rajesh D.

In transaction OPK8, in forms uncheck the 'New List' check box for the List.
Regards
Ramanujan

Shop floor paper printing

Hi Team,
I am new to use the transaction OPK8. I need to configure to print production order details for shop floor paper printing.
How to use this transaction to print shop floor papers as per our requirement?
I need to print some BOM component details and kanban control cycle informations (eg: storage bin) in the shop floor papers. Is these informations available by default in OPK8 transaction?
I am beginner to use this transaction. So your valuable guidenace required.
Thanks
psk

Hi chandan
Priniting layout can be set on your for printing shop floor paper. The required field can be set from production.
Regards
J . Saravan

Printing of shop floor papers

hi guys,
very good morning,
plz explain in details the setting for printing shop floor papers with header and components with goods issue slip and confirmations slips,
thanks in advance,
Mohan

In OPK8
Name of the list - LG01, LG03, LK02, LV02
Spool parameters - User and plant = *
Reference operation - type - *, ref order = your order type
Forms -
LG01 - PSFC_OBJECT-LIST
LG03 - PSFC_ZUGL-LIST
LK02 - PSFC_GOOD-ISS-SL
LV02 - PSFC_CONF-TICKET
Print prig -
LG01 - PPPROBJU
LG03 - PPPRZUGL
LK02 - PPPRWARS
LV02 - PPPRRUEC
List control for transaction
ref order type, plant, MRP controler-*
transaction codes - CO01, CO02, CO03, CO04, CO05, CO07
Flow control for transaction - all are online
do this setting and then create Prod order/GI/Confirm and print
come back if required.

I'am trying to copy pictures from Print Shop to send as a e-mail, not an attachment but putting the picture in the actual e-mail. The lettering from the Print Shop document will copy and paste but the picture will not. How do I get it in the email?

I create a document in Print Shop Delux download pictures from that program to make a flyer. I'am trying to send the flyer to someone and they do not want it as an attachment so I'd like to send it in the body of the e-mail. They lettering on the flyer copy and paste but the picture will not copy and paste. How do I get the picture to copy and paste in the body of the e-mail. I can't copy and paste the whole document because in did a insert text box for the picture.

Click the image , hold your mouse button, drag it and bring it to Firefox window from task bar below and release it into the body of your e-mail.Works on Gmail, Yahoomail , Hotmail....May not work on other e-mail service providers.

My only local print shop can't open a .pages document

Help! I have to have the brochure I've worked on for a week printed this afternoon, and the printer is pc only, can't open my file. When I save it as a word document, it is not possible to read the document, and much of the content is missing...it generally looks like a third grader threw it together. Any help?

It's the printer offices which are more numerous using Windows than Mac Os X which is really not the same thing.
Sigh, you are wrong Yvan.
Between Microsoft Word and the printers raster image processor there has to be a page description language. Microsoft did not proceed with TrueImage as a competitor to PostScript, so Microsoft has had no native page description language between Word and the RIP. Instead Microsoft has depended on the Adobe page description languages PostScript and after 1993 increasing the Portable Document Format which is a derivative of PostScript level 2.
If a print shop receives a Word file, it opens the Word file and launches a print job from within Word that hands Word's internal data structures off to the Windows GDI Graphics Device Interface which in turn hands off to the Windows PostScript driver which in turn writes a PostScript file to disk which in turn is converted to Portable Document Format, if the PostScript is not sent directly to the PostScript Level 2 or PostScript Level 3 RIP.
It seems that you don't understand what is this forum.
Prepress has a first principle: GIGO Garbage In Garbage Out. Apple is responsible for the input to the prepress process, that is, for the input to the page description. If the input is garbage for whatever reason, then there is nothing the print shop can do with the printing master (well, short of hand editing the page descriptions in the PDF prepress editor which, believe me, is not for the non-technical).
Apple's job is to do the best it can to make sure the everyday enduser is able to produce input that will work well as the page description is processed down the line. In my humble opinion, what Peter has been asking for (deviceCMYK and device spot colour) would not be the best way to make sure the everyday enduser is able to produce a workable printing master, but then I got myself called a colour management (best not use that word) on another list.
The question remains whether Apple in its own terms, that is in terms of the device independent imaging models Apple itself developed, is doing the best for the everyday enduser. For instance, the Adobe PDF evangelist crossed himself in the OS X 10.3 time frame when it turned out that Quartz was converting TrueType to Type 1 instead of Type 42 in writing PostScript since the TrueType instructions are hurt by converting to Type 1 hints - not to mention that the obligatory CMAP Character Map is clipped when converting to Type 1.
I know you don't know prepress, and there's no problem with not knowing prepress, but please don't post to people that Apple's prepress support is satisfactory, because in fact it is not.
/hh

View documents created using MacDraw Pro & Print Shop Deluxe on an iMac

I have documents created using MacDraw Pro and Print Shop Deluxe and would like to view them on an iMac running Snow Leopard. Do any applications exist that will open either flavor document into a format that looks as similar as possible to the original?
Thank you.

Several months ago, I started working on this issue and thought that I had it resolved by uninstalling the "Internet Printing Client" from "Windows Features" (Start > Control Panel > Programs and Features > Turn Windows features on or off > expand Print and Document Services > uncheck Internet Printing Client). This change seemed to help at the time, as I was then unable to reproduce the issue and the end-user was unable to reproduce the issue for two weeks after (thus I closed the help desk case). But now it looks like the issue is back. Maybe the above setting will help someone else, but I'm now looking for a permanent fix.
PS: I have instructed our users on the "Save as PDF" option provided in Office 2010, but I don't think that is used all the time, and the PDF printer is there only option in other applications (IE for example).
Anybody had this issue and found a fix?
Thanks,
Justin

Shop floor Printing

I have made print setting in opk8 and it is working fine with one material , one order typeand one production order, where I can see preview of shop floor paper.
But when i make production order with same material , order type and same plant. Then iam not able to get print privew (when i press print option in menu FUNCTION.
I get message After the next update the order will be printed.

In my question , I hav mentioned that for same plant, same material, same and same order type, for one production order I can view print preview in CO02, co04 serveral times
But for other prodcution order, for same plant, same material, same and same order type iam not able to see print preview in co02 or co04. In that case, everytime i get message -After the next update the order will be printed

Production Schedule Profile & shop floor paper printing.....

Hi there ,
If we set the Execute Printing checkbox in the T-code <b>CORY</b>for a production scehedule profile....... then when we will release the order along with the other shop floor paper do the Transfer Order will also get printed if the material is warehouse managed.........
Please enlighten me .....
Thanks & Regards
Kaushik

Hi there ,
Thanks for your reply...... I am aware of the fact that the shop floor paper will be printed once the order is relased & the relevant config is done in the Production schedule Profile.........
But in case of the material which are warehouse managed the Transfer requirement will be created & the further the Transfer Order........... I wan tto know that these will also Print the Transfer Order doucment for the warehouse managed material .......
Thanks & Regards
Kaushik

Shop floor with w/o no in PM module

Hi All,
Can you please explain me in understanding the **standard functionality** of Shop floor paper with W/O# in PM module.If possible please share document.
Regards,
Meghana

I guess, you are looking for smart forms which can be prepared from Maintenance order.
First in IMG, we need to define the shop papers which are going to be used for the order.
IMG => PM & CS => Maintenance & service processing => Maintenance & service orders => Print control
Under that, you can define the shop papers. Also custom shop papers can be added in that list.
Apart from that, based on order type, shop papers can be restricted. Based on user as well, shop paper can be restricted.
http://help.sap.com/saphelp_sm32/helpdata/en/32/da2e88713c11d58cd90000e8284931/frameset.htm

Printing Shop Papers for Completed Notifications

Hello,
This issue has been brought up on this forum before, but I have not managed to find an actual solution that was implemented by an organization.
We are basically trying to print Shop Papers for completed (NOCO) Notifications that have Orders assigned but that have been completed and TECOu2019d. The thread Need to REPRINT the Service Notification explains that it is not possible to print such shop papers. Is there some way to create a work around using user exits or a custom program to enable such shop papers to be printed? I've already checked with SAP and was told that no SAP note fulfills this requirement on ECC 6.0. I would much appreciate any insight on a solution you may have implemented.
Thanks in advance,
Tarun

PeteA is right you will need to have some custom code to by-pass the status checks that SAP has implemented.
Prometheus Group has a program called the Work Order Print Manager that can do this for work orders. I am a developer for this solution.
The program gathers all document related to the work order (services for objects, DMS, sapscripts/smartforms, equipment doc, functional location docs, material docs, etc) and puts them into a nice GUI for printing.
Specifically for work order you cannot print them from standard SAP if the order is in created status because the menu is greyed out). However we can put a button in a user exit to call the program. The sapscripts appear along with the other documents and can be printed.
Additionally we can add watermarks and/or to the document to let the users know they are trying to print a work order in the incorrect status. We/ I can demonstrate the work order solution to you and prototype a IW52 solution after a short discussion to help us understand your issue in particular.
http://prometheusgroup.us/wopm.php
if you are interested in a demo email them to set up a demonstration with me.
Edited by: Tim Huang on Mar 17, 2010 1:14 PM
Edited by: Tim Huang on Mar 17, 2010 1:20 PMv

Printing Shop floor documents

Similar Messages

Maybe you are looking for