Printing shop floor papers

Can anybody explain me how to see the print preview of production Order, Goods receipt (for MB31 transaction), Confirmation slip in Production Planning?

Hello Srinivas,
One of the way I could think of is setting the print mode as 'background processing' and the checking the print preview in spool request (Tcode : SP01).
Cheers
K

Similar Messages

CN22 - Print Shop Floor Papers for Network Orders

Hi All,
We are printing shop floor papers for network orders - the printers are setup, configuration is working fine.
However, there is a sporadic error: when we select "Print" and then "Save" in CN22, the system pops up a window with the list of all network activities. However, for some reason, the first time this is done, only a few network activities appear on the list. If we close the pop up, then select "Print" and then "Save" again, the whole list appears. Has anyone encountered this before? I looked through OSS, but couldn't tell if any of the notes would be applicable to resolve the issue.

Hi,
I just went through the same problem. Don't know if it is still open.
In customizing under "Project System"->"Structures"->"Operative Structures"->"Network"->"Printing in Networks" you will find entry "Recommendations for printing and print control". There it is stated that the number of time tickets or number of confirmation slips entered for the activity is greater than zero.
Check in transaction OPS0 if you have set the number of prints greater than zero in menu point "List control for transactions (double clic on the entry).

PM: Printing Task List Attachments When printing Shop Floor Papers

Hi,
We have PDF documents attached to our PM Task Lists. My requirement is to print out these PDF attachments when the shop floor papers (ie Maintenance Pick List) print. I am able to determine each of the files and their paths attached to the task list, but as of yet, I am unable to automatically print them. Can anyone point me in the right direction?
Also note that using OLE to print the attachments seperately is not an option - The reason for this is that the shop floor papers would go to the SAP Spooler and the attachments would go to the network print server.
Thanks!
Scott

In transaction OPK8, in forms uncheck the 'New List' check box for the List.
Regards
Ramanujan

Print out of Shop Floor Papers in Default Language

Hi Folks,
User has a requirement to Print Shop Floor Papers in German language only irrespective of log on language.
He does not want to manually select the German language in IW3D, as it picks the log on language. He wants it to be set as German language (DE)
Please suggest.

Hi,
You can try to put DE as default login language for these users in SU01 , then by default printing will happen in DE by default ..
regards
pushpa

Creating single spool request for printing all shop floor papers

Hello PP Gurus,
We are printing shop floor papers at the time of releasing production order using txn CO02. It creates individual spool request for printing different shop floor papers in the same orders . eg Pick list, goods receipt list etc.
Is it possible to do the cofiguration setting to create only one spool request for all the different SF papers belong to same order.? If yes, please let me know the steps for customising this.
Thanks for your help in advance.
Regards & Thanks
Rajesh D.

In transaction OPK8, in forms uncheck the 'New List' check box for the List.
Regards
Ramanujan

Printing of shop floor papers

hi guys,
very good morning,
plz explain in details the setting for printing shop floor papers with header and components with goods issue slip and confirmations slips,
thanks in advance,
Mohan

In OPK8
Name of the list - LG01, LG03, LK02, LV02
Spool parameters - User and plant = *
Reference operation - type - *, ref order = your order type
Forms -
LG01 - PSFC_OBJECT-LIST
LG03 - PSFC_ZUGL-LIST
LK02 - PSFC_GOOD-ISS-SL
LV02 - PSFC_CONF-TICKET
Print prig -
LG01 - PPPROBJU
LG03 - PPPRZUGL
LK02 - PPPRWARS
LV02 - PPPRRUEC
List control for transaction
ref order type, plant, MRP controler-*
transaction codes - CO01, CO02, CO03, CO04, CO05, CO07
Flow control for transaction - all are online
do this setting and then create Prod order/GI/Confirm and print
come back if required.

Printing Shop floor documents

Hello Experts,
Is it possible to print the shop floor documents in production order status CRTD ?
If yes what are the settings to be done to get printing before releasing the order?
Regards,
Jejesh
Edited by: jejesh yal on Jan 27, 2009 6:47 AM

Hi,
As per Standard SAP Practice, It is not possible to print shop floor papers befere release of Production Order i.e. It must have status REL and not CRTD.
You need to maintain following settings for Printing Shop Floor Papers :
In OPK8
Name of the list - LG01, LG03, LK02, LV02
Spool parameters - User and plant = *
Reference operation - type - *, ref order = your order type
Forms -
LG01 - PSFC_OBJECT-LIST
LG03 - PSFC_ZUGL-LIST
LK02 - PSFC_GOOD-ISS-SL
LV02 - PSFC_CONF-TICKET
Print Programme -
LG01 - PPPROBJU
LG03 - PPPRZUGL
LK02 - PPPRWARS
LV02 - PPPRRUEC
List control for transaction
ref order type, plant, MRP controller-*
transaction codes - CO01, CO02, CO03, CO04, CO05, CO07
Flow control for transaction - all are online
Hope this helps.
Regards,
Tejas
Edited by: Tejas Pujara on Jan 27, 2009 6:55 AM

Development of shop floor papers in Smartforms?

Hello,
To develop shop floor papares I am using standard for PSFC_STD_LAYOUT and print program PSFCOBJL for output type LG01. Is it possible to make the customization using Smartforms vs. SAPScript. In the configuration, I do not see any field which will accept Smartform object.

Hello,
Thank you for your reply.
To clarify :
For LG01 output type.
In OPK8, under Reference order types> Print program>I added the driver Smartforms.
Under Reference order types>Forms>LG01 type --> it still reads as PSFC_STD_LAYOUT. Do I need to keep this entry at all?
In your example for setting user/plant settings you are calling the same form. Would in reality they will be different forms for each plan?
read table caufvd_tab index 1.
case caufvd_tab-werks.
when '7200'.
i_formname = 'ZSF_OBJECT_LIST1'.
when '9200'.
i_formname = 'ZSF_OBJECT_LIST2'.
when others.
i_formname = 'ZSF_OBJECT_LIST3'.
endcase.
Thanks you so much in advance.

Shop floor paper printing

Hi Team,
I am new to use the transaction OPK8. I need to configure to print production order details for shop floor paper printing.
How to use this transaction to print shop floor papers as per our requirement?
I need to print some BOM component details and kanban control cycle informations (eg: storage bin) in the shop floor papers. Is these informations available by default in OPK8 transaction?
I am beginner to use this transaction. So your valuable guidenace required.
Thanks
psk

Hi chandan
Priniting layout can be set on your for printing shop floor paper. The required field can be set from production.
Regards
J . Saravan

Mass printing of shopfloor papers

Hi all,
   1. Is the standard functionality of t-code COPI is to print one shopfloor paper at a time....???
   2. Is there any other t-code to process more than one shop floor papers at a time
       ie if more than one process orders are selected automatic printout should happen for all the process orders.
Regards,
Joseph.

Hi,
   In COHVPI when we select more than one process orders the printing does not happen in one stretch.....Printing is done one after the other...So if i have 10 process orders to be printed i have to take each process order printouts one by one...How can i tackle this scenario in sap....???
Regards,
Joseph.

What is shop floor paper ?

Hi,
Can someone explain in simple statement what is meant by a Shop floor paper in PP module ? An abaper is expected to change its layout and users can print it. Which programs are involved in sapscript ? What kind of changes are normally expected in the shop floor layout ?Thru which transaction I can print and verify the shop floor papers (like PO thru ME21N).
Would highly appreciate if u can answer straight rather than sending me links.
thanks

http://www.sap.com/industries/chemicals/pdf/BWP_SB_Manufacturing_Intelligence_Dashboards.pdf
http://www.honeycombconnect.com/downloads/PILS/OTE/13_12_06WhitePaper.pdf
Regards.

What is meant by Print Shop Papers

Hi ,
What is meant by Print Shop Papers?. What is its use?.
Thanks in advance

Dear ,
Print Shop Papers : It is one of gthe custom developement based on your Standard Production Orders .In any manufacturing plant , when Production Engineer and his team have certian product developement , they need a comprehensive production information like Bill Of Material , Operation sequence , Operation Hrs , Prodiuctuion order reservation number , MTO means MTO sales Order number , customer information if required , Operation Star and Ened datses , times , Production Schedule Start /Ened etc .A shop paper contains those above information and SAP system has Print Programme to rtigger those shop papaers through Stanrda Txn like CO02/CO04N or any Z tsxn by your ABAPer.
Specially , it will be with Production Supervisor at Shop floor where production is happening and will be followed those instruction interms of material to operation till the completion of the order.
Carry out a SND search in SDN PP forum , you will find number of wiki , theards having technical information related to Print Shop Papaers .
All the best
Regards
JH

Printing Shop Papers for Completed Notifications

Hello,
This issue has been brought up on this forum before, but I have not managed to find an actual solution that was implemented by an organization.
We are basically trying to print Shop Papers for completed (NOCO) Notifications that have Orders assigned but that have been completed and TECOu2019d. The thread Need to REPRINT the Service Notification explains that it is not possible to print such shop papers. Is there some way to create a work around using user exits or a custom program to enable such shop papers to be printed? I've already checked with SAP and was told that no SAP note fulfills this requirement on ECC 6.0. I would much appreciate any insight on a solution you may have implemented.
Thanks in advance,
Tarun

PeteA is right you will need to have some custom code to by-pass the status checks that SAP has implemented.
Prometheus Group has a program called the Work Order Print Manager that can do this for work orders. I am a developer for this solution.
The program gathers all document related to the work order (services for objects, DMS, sapscripts/smartforms, equipment doc, functional location docs, material docs, etc) and puts them into a nice GUI for printing.
Specifically for work order you cannot print them from standard SAP if the order is in created status because the menu is greyed out). However we can put a button in a user exit to call the program. The sapscripts appear along with the other documents and can be printed.
Additionally we can add watermarks and/or to the document to let the users know they are trying to print a work order in the incorrect status. We/ I can demonstrate the work order solution to you and prototype a IW52 solution after a short discussion to help us understand your issue in particular.
http://prometheusgroup.us/wopm.php
if you are interested in a demo email them to set up a demonstration with me.
Edited by: Tim Huang on Mar 17, 2010 1:14 PM
Edited by: Tim Huang on Mar 17, 2010 1:20 PMv

Printing Shop Papers from Maintenance Order Urgent !!!

Hi All,
I am in need of Printing Shop papers from Maintenance order , i know that the configuration of this thing is done through SPRO
Plant Maintenance and customer service ->
Maintenance and Service Processing -> Maintenance and Service Orders -> Print Control -> Define Shop Papers, Forms and Output Programs
, but i want that when we give Print command through Maintenance order a smartfrom should trigger which i have developmed.
My problem is that i am not able to configure the Print control for SMARTFORMS.
What to do , Please suggest.
Regards,
Rachit Khanna

Amol,
Standard config doesnt provide the functionality to set the default selection dependant on PLANT. You will have to get the help of developer to do an implicit enhancement (Only If you are in ECC 6.0) to accomplish the same.
Reagrds
Narasimhan

Shop floor Printing

I have made print setting in opk8 and it is working fine with one material , one order typeand one production order, where I can see preview of shop floor paper.
But when i make production order with same material , order type and same plant. Then iam not able to get print privew (when i press print option in menu FUNCTION.
I get message After the next update the order will be printed.

In my question , I hav mentioned that for same plant, same material, same and same order type, for one production order I can view print preview in CO02, co04 serveral times
But for other prodcution order, for same plant, same material, same and same order type iam not able to see print preview in co02 or co04. In that case, everytime i get message -After the next update the order will be printed

Printing shop floor papers

Similar Messages

Maybe you are looking for