Printing single page, but feeding twice?

Hi,
I just installed a Laserjet M2727nfs. Everything went fine.
But when I print 1 or more pages (non duplex) it prints the page, but when it's almost ready it takes the pages in again as it wants to print duplex. But It is just a single page.
I have not been able to find a setting to change this.
Made a short video: https://dl.dropboxusercontent.com/u/18106764/20150403_083456.mp4
Hopefully someone knows what this is
Thanks.
Ferid

With many printers. 'sided' paper has to be loaded into the trays in one way for Simplex jobs, but in a different way for Duplex jobs.
Some printers offer Alternative Letterhead Mode, whereby media which is declared with a Paper Type of Letterhead can always be loaded in one way (the way required for duplex jobs).
With simplex jobs, the printer will then automatically handle switching sides (probably by adding a blank page and duplexing each simplex page).

Similar Messages

Printing Single Page as 2-UP in Pages

I have printing question. I'm attempting to print from Pages, but the issue I'm having probably applies to printing from any application in OSX.
I want to print a single-page document, two copies per page (2-Up) from Pages. The problem seems to be with the one page-ness of the document. The print dialogue allows for 2 pages per sheet printing, but it only works if your document has more than one page. I need it to pring the same page twice per page.
Is is possible to print this way in OSX Lion?
Thanks.

BMack,
Have you thought about having a 2-page document where the second page is a duplicate of the first page?
Jerry

HT4356 How can we print single pages, such as 1,4 and 8 instead of printing all pages?

On an iPad, how can we print single pages 1, 4 or 8 or 2, 4 and 7 instead of having to print all pages?

Thanks, Alex!
ok, I try first approach in print4.vi, but Labview return an error (view jpg); if I cut From, To controls, the VI print all pages. The same things happen also if I trasform I32 in Variant.
I don't try second approach, because at this time I have only one report
I try also with VB macro: this is better (print3.vi) but.....if I use:
Sub Print_Pages_From_To()
ActiveDocument.ActiveWindow.PrintOut Range:=wdPrintFromTo, From:="2", To:="3"
End Sub
is ok; print the pages selected; if I use:
Sub PrintPages()
ActiveDocument.ActiveWindow.PrintOut Pages:="2-3"
End Sub
printer print all pages.
what do you think?
regards,
Italo
Attachments:
print Problem.jpg ‏39 KB
print4.vi ‏19 KB
print3.vi ‏19 KB

Why can I not print from pages but can if I copy to text edit, I get "printer off line message " from pages ?

Why can I not print from pages but can if I copy to text edit, I get "printer off line message " from pages ? I use HP wireless printer .

Are you sure you have the right printer?
In UNIX/OSX printers are virtual links to devices and even with the same name can be trying to reach a printer via another network address, so it thinks it is another printer.
Peter

I CAN PRINT HP PAGES--- BUT NOT ON LINE PAGES

I CAN PRINT HP PAGES BUT NOT ON LINE PAGES
ERROR HAS OCCURRED IN SCRIPT ON THIS PAGE
ERROR UNSPECIFIED

Please read this post then provide some details. What printer model? What operating system? How is the printer connected?
What browser are you using? Are you using HP Smart Printing or some similar program?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

After Update printer won't print to pages but will to emails

My iMac Intel did an update and since it was done my printer won't print for pages but if I print an email it will print.

Update Pages to the most up-to-date version and then restart the computer while resetting the PRAM. If you don't know how to do a PRAM reset, please click Intel iMac SMC and PRAM resets. If that does not fix it then please post back and we can take some other steps.

I am using macbook air and thrying to print wireless over time capsule with a lexmark 5600/6600 series, i can print test page but only this. Anyone can help?

I am using macbook air and thrying to print wireless over time capsule with a lexmark 5600/6600 series, i can print test page but only this. Anyone can help?

Check here, if this can help:
http://support.apple.com/kb/HT4670?viewlocale=en_US

Setting up new book with single pages but facing preview and breaking up pages at print time

I have a new book to design. Last time on a similar project (with 100 pages) I had a massive cry at print time as the printer wanted single pages with bleeds. I had set up the book with facing pages. When I unchecked to non facing pages I lost all my formatting and margins... I spent hours fixing this up.... I do need to show double spreads to the client as we go along and I do want to work in a mode that shows both left and right next to each other (ie in a book format). What do you suggest? I have been looking at setting up as single pages side by side and then at print time I think I can move all my right hand pages over with the break up page function and then fix up all my bleeds manually.? thanks in advance

lisalip schrieb:
no my printer needs 5mm bleed all around for the books I am doing and wants single pages with crops and bleeds
I will check the link and hope ok
I do prefer to design with facing pages but as I said it was a nightmare for me last time when setting for print
You confuse single pages with non facing document.
Every page has to be its own page. When your document has facing pages you have to set up a document with facing pages. There is no way around. Otherwise you will have problems with the left and the right page number and a lot of other issues.
If the printer needs single pages you have to export your document as PDF with single pages. That means deactivate the spread option in the PDF export dialog.
Here I have an example:
Situation:
In the 2 spreads on the top you don't have a problem when you export to a single page PDF. The bleed is taking material from the opposite page. It is ok and not disturbing.
But the bottom spread is different. Here you see a design break. It would be disturbing, if you take material from the opposite page. In many cases you would not realize it, but there are several situation where it might be a problem like glue or o-wire bindings where the bleed might become visible.
So you have to go to the page panel.
You have to select the spread first, then you go to the fly-out menu and select don't "allow selected spread to shuffle" pages. The numbers of the spread will appear in rectangle brackets.
Now you can drag the right (or left) page away from their counterpart on the spread. First you have to deselect any pages from that spread, so you can click on any thumbnail of any other page of any other spread. Then click on the right page of that spread. Only this pages has to be selected.
You see the icon of your curser changes as it is in the image above. Drag it as far as you see a thick vertical line. Then release sthe curser.
As result you have now seperate pages. You need only to extend the image, here on page 6. I have taken an image which is large enough, so I need only to move the image frame edge to the bleed.
When I export a single page PDF, as your printer wants I don't get problematic bleed from the opposite page.
You can download this example as IDML file. https://www.dropbox.com/s/qnotrl1ihe7umh7/SinglePages-Spread%20Ordner.zip

HP 3180 All-in-one will print test page but nothing else

Hi,
I have a HP 3180 All-in-one connected to my desktop PC which runs on Vista OS. The printer seems to be perfectly happy to print a test page but with all other documents it feeds the paper as though it's getting ready to print, then the cartridge moves to start and nothing happens. The programs I have tried printing from include Microsoft Word 2003, Opera (to see if it was just an issue with Word) and Notepad. Google Chrome won't print either, and pops up with the ONLY error message I have recieved from any program which states : "Something went wrong when trying to print. Please check your printer and try again."
Notepad seems to print fine, as with the test page. With all the other software nothing shows up in the printer queue at all when I open the Printers and Devices window. I have run HP Diagnostics on it and that says that nothing is wrong.
Is this a problem with driver versions? I believe my boyfriend has uninstalled and reinstalled numerous times.
Any help is much appreciated.
Best regards,
Bexytea

Hi Bexytea - I noticed you mentioned you had run the HP diagnostics on it. Not sure which one, but if it wasn't the print diagnostic utility, I'd definitely recommend running it:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?lc=en&dlc=en&cc=us&lang=en&softwareitem=mp-...
If you've already tried that utilitiy with no success, you might try installing one of the drivers that comes with Windows Vista by going into the Printers window, right clicking and selecting add printer - follow the prompts, choose HP and there is a selection for HP Photosmart 3100 series. It may not provide full functionality, but it would help narrow down the issue and might provide a workaround for the short term.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Printing single page from book

I would like to print a single page from an Aperture book containing 25 pages. I tried on my Epson 2400, but all 25 pages went to the printer.
Thanks, Susan

Save as a PDF using the PDF button, then open that in Preview and print, selecting just one page.

8500A Plus - Printing 1 page but 1/3 of it on 3 pages - ALL THE TIME!

Hey All -
Picked up an 8500A Plus printer and having some serious issues with it.
1. When I try to print anything - 1 page or 100 pages very very often (like 85% of the time) it will print 1 page over 3 pages of paper - or 2 pages of paper. It just divides it up and prints the 1 page over multiple pages - right to the edge as if there is a feeder problem (like it took 2 pages by mistake 4" apart) - but it didn't - it takes one - prints 1/2 or 1/3 the page - takes another prints the next 1/2 or 1/3 and so on. The ONLY way to solve it is to turn it off - then back on. Then it works for 1 or 2 print jobs if done immediately - if it sits it will not do any correctly - the longer it sits (like 1 hour) the more it does it. Turn it off then back on and I am good for a bit.
2. I select scan to computer - and it will the 1st time about 80% of the time - but the second time? NEVER - It says can't make a connection - even though 10 seconds ago it just did.......turn off - then back on and it works for 1 turn.......then turn off and turn on blah blah blah.
Will be returned if this can't be addressed - a complete waste of time.

Did you return your printer or were you able to fix the issue. I just purchased this printer and it worked fine for two days, then suddenly began printer various parts of page 1 onto two or three pieces of paper.

Printer printing single page as multiple pages and on sometimes only print part of the page

The problem may not be with the printer it could be with the computer instead and I would think that maybe that is the problem. The computer is an HP 255 as well, and both units belong to my school so I don't have administrative functions. The computer runs Mircosoft windows 7-professional version 32 bit. I used to be able to print normally with no problems. However, recently I tried to print my paystub and it blew it up so wide and long that it only printed a third of the page down and half the page across. Today I tried to print out some other paperwork and for a single page it was printing as three pages but some pages it printed in their entirety with no problems. I've tried to run the diagnostic check and it downloads but refuses to let me open it no matter what program I try to use. I've tried to check the printing perameters but it tells me that it's set at 10 by 11 with no margins and is set to portrait. If I try it on my Asus desktop, it seems to print things just fine so I'm inclined to believe it is the computer but I have no idea what's wrong or how to fix it. Thanks.

BMack,
Have you thought about having a 2-page document where the second page is a duplicate of the first page?
Jerry

Safari printing single page iPad?

I have searched and searched for a solution to this but cannot find one...How can I print a single page from safari on my iPad? For example...when a page is really long and it takes 4 pages to print it, how can I print only page 3?

If you go to print in OSX you get the option to print page 2-5 if desired out of a 20 page document. I know it's not an option in iOS standard print from safari and I thing that is unfortunate as page range is an option in other programs such as Dropbox or pages so I want to know if there is a way to get this option that some forum member has found.
Thanks anyone and everyone who has any answer of this. I don't post usually because I am a very experienced Mac user since 1986 and don't run into difficulty unless it is with non standard usage of systems.

Print single page?

Hi - I am now confused as a new Mac user. I am used to being able to go to print page in explorer (and using Win XP) I will just get the page I am viewing printed. I wanted to print some information from a PDF file and selected 'print page' from the print menu but it printed out the whole article. Also won't copy and paste. I have tried this with various documents so what is going on and how do I print a single web page???????
Thanks Ann

Hi Ann,
Just to clarify, you're in Safari and you've clicked on a link which has opened a PDF file in the browser window, and now you wish to print a single page from the multipage PDF. Is that right?
Now having brought up the 'Print'-dialog, and expanded the dialog sheet using the arrow button next to the "Printer"-field, you've changed the "Pages"-setting below from "All" to "From", and given it a page range, before hitting "Print". Is that what you've been trying to do?
Yang

Hp all-in One remote prints test page but cannot find printer for anything else

The HP All-in-One application can print test pages on my 8610 but when I go to any document or photo and try to print I get the following message "This Printer is not available." I have checked and have the latest version of the HP All-in-one Printer Remote application and the HP Print Service Plugin applications from the Google Play store. I am using a Samsung Galaxy 5 running Android 5.0. If I print a page from my laptop using wireless to this printer, I can see the All-in-One application tracking my printer status so I know it can see the printer. The app on the phone will show the status under the printer name going from Ready to Unavailable to Ready as a document is printed and then finished. I am printing directly with local WIFI and am not using the ePrint feature.

Hello , Welcome to the HP Forums!
I hope you have a pleasant experience here. I'd like to help you with the issues you are having printing from your Samsung Galaxy S5 to your HP Officejet Pro 8610 e-All-in-One printer. Firstly, do you have the printer plugged directly into a wall outlet? The printer has a power moderator built in, so if it is plugged into a power surge bar or battery backup it may be getting inconsistent power. This can cause all kinds of firmware glitches (like the printer status not being broadcast properly). If that doesn't immediately resolve the issue, please follow the steps below: Network Power Reset: Let's leave the router on and unplug the power cable (NOTE: Do not reset the router.), then do the same with the printer, and shut down the computer. After a full minute, plug the router back in, wait for it to fully power up, then plug the printer back in and wait for the wireless light to become solid. Once both the router and printer are on, go ahead and turn the computer back on. Doing this will refresh the network connection. Restore Network Defaults and Reconnect: 1. On the front panel of the printer, touch your wireless icon at the top2. Select Settings.3. Select Restore Network Defaults.4. Restart your printer.5. Once it's booted back up, touch the wireless icon again.6. Select Settings.7. Select Wireless Setup Wizard and follow the prompts to enter your wireless network details.8. Try enabling the web services again. Another thing I would suggest, would be to download the HP ePrint app, rather than the All-in-One Remote. The Remote is moreso suited for scanning to your phone from your product, so I would suggest trying the ePrint app (you can download it from the Play Store). If the issue persists after these steps, please answer the following questions so I'm better able to assist: Are you able to print reliably from any other devices on your network?What brand and model of router are you using?What is it that you are trying to print? (ie. E-mail, photo, document)What app are you printing from? (Some Android apps have a direct printing feature)I look forward to hearing back from you and working towards a resolution to this issue!Have a great weekend.

Printing single page, but feeding twice?

Similar Messages

Maybe you are looking for