Printing slides (chalkboard them) some object don't print

I am trying to print out my presentation.
I chose the chalkboard theme.
White lines and shapes do not print on the presentation.
(I chose not to print background when printing)
I have white lines with arrows that don't print.  (White text does though)
I have filled circles (Without outlines) that don't print either.
Kinda frustrating, can't figure out what to do.

I disagree. 
Text is a different entity compared to shapes, text  has a particular set of compared attributes, shapes have a different set of attributes.
Why not white lines?
I do not know. A tick box in the print dialogue to print objects as black when the background is not printed would be good idea but that option is not available.
No matter what color the Object (A cicle in this case) it does not print.
Yes same here.

Similar Messages

  • Prints garble intermittently. Some parts of pages print fine, others have characters replaced.

    Computer is Windows XP. Printer is wired network connection. Printer is new OfficeJet Pro 8600 N911g and has the latest drivers and firmware.

    Found this fix..
    http://routingbyrumor.wordpress.com/2007/12/30/my-adobe-acrobat-pdf-files-are-printing-garbage-text-...
    Today, after reprinting the same PDF several times, and getting garbage out each time, I clicked “print”, and started looking around in the print window that opens for my HP 7260 printer. When I print PDFs, I get an “Advanced” button in the bottom left corner of the print window that I can click on. There are a bunch of “greyed-out” postscript options in this window, but there is also a check box that says “Print as image”. I decided to check this box and click “OK”, which closes the advanced printing options window, then I clicked “OK” to send the PDF to the printer. I think doing this causes the entire document to be sent to the printer as “raster graphics”, rather than as PCL containing a mix of graphics and ASCII text.
    Voila! The PDF printed correctly. I’m not certain that checking the “Print as image” option was the reason, but it’s worth trying if you are having this problem, and you have this option in your print setup.

  • Print job problems with AEBS - jobs don't print until another job is sent

    I have been experiencing an anomaly with my printer not printing the last page of multipage documents since getting our AEBS with Gigabit Ethernet. Before getting the AEBSs, I had two Linksys routers that were performing well, but would crash regularly. I recently purchased two AEBS router to replace my two Linksys routers. I have the latest AEBS, and an older AEBS M8799LL/A sometimes referred to as the UFO or Crow’s Nest. My printer is a networkable HP Color LaserJet 2550n.
    When the Apple Tech Support person could not get this printer to work when attached to an Ethernet port, they suggested that I attach it to the USB port. I finally got it to work with our Macs, and Windows XP running in Parallels using Bonjour. What we noticed right away was that the printer was taking longer to respond than when we were using it as a network printer under our previous Linksys network. Another thing that happened was that frequently a print job would not appear to have been sent (spooled?) to the printer so we would issue the print command after waiting a couple of minutes and end up with two copies of what we were printing. Yesterday I was printing a basic 5 page text document from Pages and the last page did not print. So I created a document with just a ‘.’ and sent it to the printer. Out came the last page of my five page Pages document and the document with just a ‘.’. The AEBS does appear to be somewhat more stable than our Linksys equipment, but getting printer to work properly has been very frustrating.
    Is anyone aware of what might be causing this problem. At first I was blaming Windows, but it is happening very frequently when printing basic documents in Mac OS X 10.4-Tiger. Any help would be very much appreciated.

    Ah the self healing properties of OSX. This problem appears to have fixed itself.

  • Exporting a PDF so that non-printing objects show but don't print?

    I've just spent a couple hours trying to find an answer to this in the forums, but can't. (The most frustrating was one thread where the original poster said, "I found the answer here," and gave a link that went right back to the main page of the forum. Argh.)
    Okay, anyway ... what I need to do?
    I've got a document with graphics that I want to show up on the pdf when I export it, but that--if a reader prints it--don't print.
    The document looks like a 3-ring binder with "tabs" for each section--just like the real thing. But the rings and tabs go right up to the edge and look terrible when printed, and whose printer can print right at the edge of the paper, anyway? But the tabs work as navigational links while looking a the pdf, and the rings just make it look cool, so I WANT them in the pdf.
    I've tried:
    Turning the entire layer into a non-printing layer (one that "shows" but does not "print"). But when I export it to a pdf, it doesn't show up on the pdf to look at OR to print. So that doesn't work.
    Using the Attribute option to turn each object into a non-printing object, but so far as I can tell, that doesn't do a thing, because they still print from the pdf.
    Exporting with the "create pdf layers" turned on and off. Exporting with the "include non-printing items" turned on and off.
    Basically, I've pretty much tried everything. I gather, from browsing the forums, that this is POSSIBLE, but can't for the life of me figure out what to do to make it happen. (Short of hiding the tabs' layer and creating an entirely separate PDF and calling it "Print version" which is not exactly what I want to do!)
    Is there maybe some magical combination of ons and offs I need to select to make this whole thing work?
    (And, seriously, am I the only person who thinks the supporting documentation is just dreadful? I can't find anything in any of the Help screens that even mentions this, much less explains how to do it.)
    Any help is appreciated!!
    --Deb

    Partial progress...
    The button option (and, I'm using CS3, by the way--I should have said that originally) does work in terms of showing on the pdf but not printing.
    The problem is that it messes up the way the document looks.
    I said it's designed to look like a 3-ring binder with tab-dividers between each section, and each tab has a hyperlink to take you to that section.
    Now, when you've got a paper binder in front of you, the tabs stay in the same sequence, and often overlap a bit (which mine do). The problem I'm having, having turned all of them into buttons, is that when you click on any of them, it "jumps" to the front of the row, so that they don't "flow" in the correct sequence.
    Am I explaining this well? You know, the top-most tab is at the top of the pile, the next one is always below it and above the third one, and so on ... you never see the second tab on TOP of the first one. I'm trying to get the document to act as close to a hard-copy binder as I can, and it did ... except the buttons keep jostling each other for attention...
    I'm going to go play around with this some more now, but ... any suggestions? (Other than restructuring my tabs so that they don't overlap at all?)

  • Some photos don't show in LIbrary view--just the outlines of them

    Tonight I tried to transfer a bunch of digital photos from a CD my daughter burned into my iPhoto library, into the 2006 year folder.
    I opened the CD and in the icon view, the pictures looked fine--jpeg files.
    After I transferred them, these pictures don't show in my initial iPhoto window (the one that opens first when you click on iPhoto in the Dock, and shows all the pictures in my Library sorted by (in my case) roll/date.
    Then photo thumbnails from years prior to 2005 show up, fine, but for the most recent year of pictures, all I get are the outlines of where the thumbnails ought to show. When I click on one of the blank thumbnails, of course I get a blank ...but the frame in the lower left shows the ID info for the picture and the picture counts, etc.
    I can open the folders from the Pictures file and see them...they just won't show up in the overall Library window.
    So...I moved the transferred ones out of the iPhoto library and just put them in the Pictures folder for now.
    But what did I do? And how do I "fix it" to make all the thumbnails show up again? This is probably some simple thing...but I can't figure it out. I tried showing just the last 12 months...and I get all the blank outlines.
    G4 iBook   Mac OS X (10.3.9)   Using iPhoto 5, 768MB RAM,

    Hi john,
    First problem. You need to import photos into the iPhoto Library the correct way which is while iPhoto is open. Drag the photos out of where you put them (you already did) now you can import them into iPhoto from there.
    Read on for more info....--First thing to know and remember is this...Do not drag any images, folder of images into the iPhoto Library in the Finder. Images have to be imported into iPhoto within the application. Do not scan images and save them into the iPhoto Library folder in the Finder. Save them to another location such as the Pictures folder or even the desktop. You can then import them into iPhoto.
    If you have already put files/folders in the iPhoto Library folder in the Finder then you will also find out that if you try to import them into iPhoto you will get an error message. No worry, just drag them to the desktop and import from there.
    --All images that you import are shown in the library view. You can choose how you want to view, by rolls, by date, by rating, etc. When you put images in an Album, slideshow, book, etc, you are actually just putting pointers to those images in the library. You are not adding more images. If you delete an image from the Album it will still be in the library. If you delete an image from the library it is deleted from iPhoto's database and your hard drive (unless you have it backed up somewhere else)
    --You have a folder of images on your hard drive and want to import them into iPhoto. Drag the folder of images into an open iPhoto Library window and the folder of photos will be copied into the library, resulting in a new roll with the name of the folder. You now have two copies of those photos, the ones in iPhoto's database and the ones on your desktop. You can keep the ones on your desktop that you just imported as backup or you can delete that folder.
    -- you scan a picture/pictures and save it in a folder. You cannot scan directly into iPhoto or the iPhoto Library folder in the Finder.
    You want all your photos in iPhoto so you import them into iPhoto.
    Now you have two copies of that picture/pictures, so you can delete the originals that were in the scanned folder and keep the one/ones that were imported into iPhoto.
    -- You download pictures from your camera into iPhoto.
    There is now one copy of each of the pictures. (DO NOT HAVE IPHOTO DELETE THE IMAGES FROM YOUR CAMERA! DELETE THEM MANUALLY WITH THE CAMERA-if something goes wrong with the import and they are never imported and then they are deleted from the camera you might end up losing those images)
    You want to change something about a picture you imported, such as
    cropping it or changing the size, or changing the orientation.
    Once you do that to a picture, you now have two copies of the picture
    in iPhoto, the original and the edited one. The edited one will be in the library organize view. The original is packed away in an Original folder in your iPhoto Library folder under the date of the roll. You can always revert to the original by control clicking on the photo and choose "revert to orginal" You will not have this choice if you used iPhoto Diet to get rid of the Originals.
    (a quick note on cropping within iPhoto...when you are in edit mode, you automatically will be in the crop mode with cross hairs to highlight the crop area. To finish cropping you must click the crop button and then go back to library view and your cropped picture will be there.
    3.You want to use Photoshop or another graphic program to edit a picture in your iPhoto library.
    You can open up prefs for iPhoto and choose "when double clicking on
    photo ..do" choose "other" and select Photoshop. Now you can edit all
    pictures in your iPhoto library in PhotoShop by double clicking. If you save the photo with the same name and as a flattened file it will be saved right into iPhoto and you will see the changes. If you don't want to save it into iPhoto then do a "save as" and save to the desktop. You will then have the original photo still in iPhoto and your new edited photo on the desktop.
    Or, with iPhoto open, you can drag a picture from the library window
    to your desktop (you see a + sign on the pic you are dragging). You now
    have two of the same picture, one in the iPhoto library and one on your desktop. You can open up the one on your desktop in any graphic program and work on it. The one in iPhoto stays the same. You can also share/export the picture/pictures to your desktop or folder to work on them or do batch processing, etc. You will still have the originals in your iPhoto Library.
    Or, you can open up the ~/Pictures/iPhoto Library/folders and option drag any
    picture out of the folder to your desktop. Notice that you will see a plus sign while dragging the photo. This is copying the file to your desktop
    I would advise anyone not to do this as they might forget to use the option key and drag the photo out. Next time you open iPhoto the photo will be missing.
    Two Apple kbs for you to read
    Don't tamper with files in the iPhoto library folder
    About the iPhoto Library folder
    Don't forget that in Library view you can Control click on any picture and get a contextual menu with many options. One is to revert to original.
    Now to get to your next problem...do a "get info" on your iPhoto Library folder.
    Get info on the iPhoto Library folder
    Make sure the owner is you and you have read/write" permission. If not, click the lock to unlock and change to you as the owner with Read/write. Click the button at the bottom.
    iPhoto Library Info
    Get back with results or any more info.

  • Why are some objects not printing from Illustrator after I print to PDF?

    Hi,
    I've printed a large Illustrator CS6 document to PDF (using Adobe PDF setting in print dialog box), and it looks just fine when I view the PDF. The problem is that some lines do not print when I try to print the PDF on paper. I've tried adjusting settings and printing to the PDF in different ways, but can't figure it out. Everything looks great on the screen, but some lines are missing once printed to paper. Others have tried printing the PDF as well and are also getting missing lines.
    Any suggestions?! Thanks!

    I've tried selecting print all layers, and I'm also tiling the pages to a custom page size. I've left all the other settings at default. Everything looks perfect on screen, but parts of the same object do not print. I tried to attach a screen shot but am getting an error. Basically each page has a border around it, and one side of the border is not printing on certain pages.

  • Some Adobe PDF documents don't print from Adobe Reader; with other software it works correctly

    Dear community,
    I'm facing the problem that some Adobe PDF documents with lots of colors and lines (size less than 3 MB) don't print on our printers from Adobe Reader XI.
    The same files when opened with PDF XChange or PDF Architect are printed out without problems.
    How can I provide an Adobe Reader that is able to do so? Any recommendations about solving the issue are very appreciated.
    Best regards
    Christian

    Word document problem fixed at the moment by deleting and adding the Lexmark printer again.

  • I have cookies enabled but some websites are still telling me I can't use them because I don't have cookies?

    I have cookies enabled but some websites are still telling me I can't use them because I don't have cookies?

    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Test. If the sites still don't work, they're incompatible with Safari. Use another browser, such as Firefox, to access them.

  • Check marks, symbols... some songs have them some don't want do they mean

    I have purchased a few songs from the iTunes Store, copied some from CDs etc. Some of the songs have check marks some don't, some have this "radio like signal" in front of them some don't. What do these things mean? My real problem is, is that I can copy the songs with the "radio like signal sign" in front of them to my ipod but the others I can't copy or move anywhere, not playlists or on to my ipod. What am I doing incorrectly? Help!

    The check boxes have a number of uses: iTunes: Understanding the Symbols Next to Songs
    Unchecked songs will be skipped when playing songs from the library or a selection. They will only play when individually clicked on.
    Smart Playlists have an option that unchecked songs won't appear.
    Unchecked songs will not be burned to CD.
    The iPod has an option to only sync checked songs
    The Genius & iTunes DJ features will ignore unchecked songs
    Basically unchecking is a way of telling iTunes to ignore the item and exclude it from other automatic features.

  • Hi, i have just scanned some docs via my Ipad  and Epson printer. Saved them on a local folder! Where can i see and access this folder?

    Hi, i have just scanned some docs via my Ipad  and Epson printer. Saved them on a local folder! Where can i see and access this folder?

    Welcome

  • J4680 printing bottom half of some lines of print. What can be done?

    HPJ4680 is printing only the bottom half of some lines.  Can I correct this?

    Hi @ReneePM,
    Welcome to the HP Forums!
    I noticed that your HP J4680 is printing bottom half of some lines of print. I am happy to help you with this printing issue!  
    For further assistance, I will need to know the following:
    If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
    If the printer is able to make copies.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
    Please see this post, Want Good Answers? Ask Good Questions, by @Bob_Headrick, so you can get the most out of these forums.  
    If you are using Windows please try the HP Print and Scan Doctor, and let me know what happens!
    Thank you for posting, and hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • How to make vintage prints slide show one photo at a time?

    Does anyone know to program the vintage prints slide show to display only one photo at a time?

    The slideshow templates are fixed and can't be changed.
    Alternatives to iPhoto's slideshow include:
    iMovie, on every Mac sold.
    Others, in order of price: PhotoPresenter  $29
    PhotoToMovie  $49.95
    PulpMotion  $129
    FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
    Final Cut Express  $199
    It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Express is the most capable app of them all. You get what you pay for.
    Regards
    TD

  • Preview displays blank page with some pdf files but prints what is hidden

    Some of my pdf files have started coming up as blank in Preview. There still is data underneath, which selecting areas will disclose as though you are scraping white out off the print.  Printing is unaffected, and only some files are affected.  Tried repairing permissions, but no luck.  I recently did the OS update, and didn't notice the problem before that.  I have restarted the computer a couple times,.  a few odd artifacts have shown up on the screen as well, though box selecting over these causes them to disappear.  I haven't been able to find any consistent difference in the pdfs that will display properly and the ones that won't.  doesn't appear to be associated with when they were created or  which version of software they were created with.  Saving them under a different name doesn't help.  Adobe reader works fine, so it is specific to Preview ( which I would rather keep as my default reader )
    Any ideas what went wrong?  How to fix it?

    I have no trouble viewing the file you posted in the same version of Preview that you have.
    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Some images don't transfer from RH8 to the Word output

    Why is it that some images don't transfer from the RH8 file to my Word output when I generate?
    They do transfer to the Flash Help, but not to Word.
    Some of them are small images - just shots of icons or tools - and others are quite a bit larger.
    It takes me at least another hour to format the Word document after the output.

    Hi Patti,
    I have had similar problems of images "softly and suddenly vanishing away" during export from RoboHelp to Word. I never really solved the problem, but I did find some useful tips.
    First you shouldn't embed your images; in the Printed Documentation Wizard you should select "Link to sub-directory"
    This has the advantage that lost images are now replaced by a small red cross -- easier to find when reviewing.
    Next, in Word, try Edit>Links. If you are lucky you will see something like this:
    Notice that some links have a Source File of ../Images; they are the ones I was missing. For some reason the path to the image file is moved up one level.
    I never found out why, but the workaround was simple: copy the entire Images directory and paste it one level higher in the directory hierarchy. A waste of disk space, to be sure, but it worked. The grabs above show Word2003 and RH8.
    Hope this helps,
    --- Derek

  • The requested transformation would make some objects too large.

    Please help.
    I load a PNG in Illustrator. However when it loads it doesn't load right. It loads HUGE. When I try and move it, it says:
    "Can't move the objects.The requested transformation would make some objects too large."
    I am pulling my hair out here. Why the hell can't Illustrator just open a bloody PNG and allow me to edit it?!
    Any advice would be appreciated. Thanks.

    I see, Christopher.
    It seems that something is seriously wrong.
    You may try the following (you may have tried/done some of them already) and see whether it helps (the following is a general list of things you may try when the issue is not in a specific file; 3) and 4) are specifically aimed at possibly corrupt preferences):
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder http://www.bugge.com/Family-and-friends/Illy/illy.html (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

Maybe you are looking for