Printing slow after Snow Leopard Upgrade

Hi! Newbie here! I recently upgraded my 2007 iMac to Snow Leopard and as a result my Canon BJC-2100 printer has slowed to a crawl. It seems the software adjusted the print quality to the sharpest setting but this also slowed the process way down. I don't see anything to help me adjust the print quality or otherwise change the printing speed.
I would love to hear from forum members as to how to speed the printing back up a bit. Am I doomed to have to buy another printer?
Thank you!

Thanks. Yes I went to Canon's web site and plugged in Snow Leopard for my printer. I received the following message:
"There is no driver for the OS version you selected. The driver may be included in your OS or you may not need a driver."
Too bad there doesn't seem a way for me to change the printer's settings back to the way it was.

Similar Messages

Network connection extremely slow after snow leopard upgrade

I should first state that my son's new Intel Mac Mini (2009 model) is working fine without any issues - it is on the "n" band. My wife's macbook (on Leopard) and my Thinkpad are continuing to work fine - both connecting to the "g" band of my Simultaneous Dual band AEBS.
On my 2008 model mac mini, the installation went thru fine, but the network connection is extremely slow - it is connecting using the "g" band. Even when I launch the Airport utility, it takes a while to locate the AEBS and then when I click on "Manual Setup", it takes a very very long time to read the configuration. This tells me that the airport interface on the mac mini has some driver issue.
I tried all the suggestions given in other threads (listed below), but none of them worked.
1. Created a new network location and rebooted
2. Trashed the com.apple.airport.airportutility.plist and rebooted
3. Rebooted countless number of times - illogical, but that kicks in when I can't find a solution.
It is past midnight here (20miles from Apple headquarter). Going to wait for another 30minutes. After that, I will use SuperDuper to install my Leopard back on my mac mini which I had cloned before starting the installation.
Appreciate any suggestions - I am open to any prayer solution as well! If not, the Snow Leopard family pack is going back to the Apple store on Monday.
Just saw at engadget: "On a 17-inch unibody we were putting through the paces, the WiFi inexplicably has gone out and we have yet to get it working again."
Message was edited by: new2appletv

Some more info about my setup:
*Simultaneous Dual band AEBS:*
Radio Mode: 802.11n only (5 GHz) - 802.11b/g
Radio Channel Selection: Manual - 161 (5GHz), 6(2.4GHz)
*Airport Express:*
Wireless mode: Extend a wireless network
Allow wireless clients checked under the name of the network (same as for AEBS).
Both are WPA/WPA2 Personal security. And both the routers were upgraded to 7.4.2 firmware this morning with the hope that it will help.
*N Devices (both working fine):*
Apple TV 40GB
2009 Model Mac Mini upgraded to Snow Leopard - working perfectly.
*G Devices:*
Thinkpad running WinXP
Dell Laptop running WinXP
Acer Netbook running WinXP
iPod Touch
iPhone 3G
Linksys webcam
_All of the above are working fine_.
+2008 model Mac mini -+ upgrade to Snow Leopard shows extremely slow wifi connection that it is unusable. It takes 20min to load apple homepage. When I boot from the clone of my Leopard lying on my external drive, it works perfectly.
I compared the settings between all the tabs of Network-->Airport-->Advanced and they are identical between Snow Leopard and Leopard mode except that SL doesn't have the "Apple Talk" tab.
Appreciate any help to debug this.

Losing Printer Options after Snow Leopard Upgrade? Any solution?

I've lost the ability to print multiple pages on one page with my Samsung SCX-4500 printer. The only factor that changed is upgrading to Snow Leopard.
I've reinstalled printer drivers but the Page Setup/Layout drop down screen is not available.
Has anyone else experienced this problem? Does anyone have ideas as to how to solve it?
I hate wasting paper and the multipage function was a factor in purchasing this printer from Apple.
Thanks.

clgclg wrote:
I've lost the ability to print multiple pages on one page with my Samsung SCX-4500 printer. The only factor that changed is upgrading to Snow Leopard.
This ability shouldn't be tied to the specific printer you are using.
I've reinstalled printer drivers but the Page Setup/Layout drop down screen is not available.
What application are you printing from? Some applications don't have a Page Setup.
The Layout panel is in the menu that contains the current application's name. For instance, if you are printing from Safari and the print dialog is expanded (use the disclosure triangle to the right of the printer's name if it isn't), clicking on "Safari" will show the Layout menu.
Hope this helps.

How to align Epson print cd after snow leopard upgrade?

I have just brought everything over to a new mac - but i cant for the life of me print onto cds / dvds anymore. - using an epson stylus photo r210
It seems like the epson print cd software cant align printing onto a DVD/cd under mac osx 10.6
it prints the cd ink all over the cd tray - and misses the cd completely - well - about 10% of the printed image makes the cd - on the right hand side the is ink all over the tray.
The epson print cd software only allows alignment to within 5mm - i am about 50 mm out.
can anyone tell me how to calibrate the image so it centers on the disc?

Apple Portables: Troubleshooting the slot load optical disc drive

Isight no longer works after snow leopard upgrade

my isight no longer is available directly after snow leopard upgrade on my macbook black. Anyone else with the same problem? The isight does not show up in 'about this mac' under USB and I tried resetting SMC and PRAM.

Hi,
In Leopard there was an App called iSight Update app that was in Hard Drive/System/Library/Core Services
This does not seem to be there in Snow Leopard.
An issue with some computers with the camera was that in System Preferences > Displays the Colours needed to be set to Millions.
Also check the Hard Drive/System/Library/Extensions folder and see that you have the Apple_iSight.kext (this is likely to handle the Internal iSights as well).
One last thing.
Some Web sites can make use of the camera using Flash.
If that tab is still open the Browser may have use of the camera.
It sounds like you have done computer restarts and this will not be the case unless the browser is set to go back to that page.
7:26 PM Sunday; August 30, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Wifi problems since 10.5.8 Update. Even after Snow Leopard Upgrade.

Wifi problems since 10.5.8 Update. Even after Snow Leopard Upgrade.
Is there any way to use a 10.5.7 wireless .kext files on Snow Leopard? And where can I find the files?

Ok, I have the fix!! After several frustrating days it finally just works.
The process:
Upgrade your Macs to 10.6 (Snow Leopard)
Powercycle your modem AND time capsule / airport TWICE
Reset your time capsule with a pin or paperclip on the back
Follow the prompts to setup your time capsule / airport access
-- On your Macs
Go to System Preferences > Network > Airport > Advanced > TCP/IP
Click "Renew DHCP Lease" then click "Ok"
Click Apply
Turn off Airport
Turn Airport on
IT WORKS!!!
One of the magical people at tech support walked me through it earlier today. The whole process took about 1.5 hrs because Show Leopard takes about an hour to install on one machine.
Hope this helps-
Joshua

Receiving email after Snow Leopard upgrade

Everything works fine after Snow Leopard upgrade 10.6.2 except I cannot RECEIVE email. I have checked with Comcast and verified my settings for both incoming and outgoing POP mail.

Hello and welcome to the Discussions.
I had no problems of this sort when upgrading to Snow Leopard or 10.6.2. Were you already running Snow Leopard in an earlier version, or did you upgrade from Tiger (10.4.11) directly to SL 10.6.2?
Quit Mail, and in the Finder open Home/Library/Mail. Locate any files named to include MessageUidsAlreadyDownloaded. At the root level of the Mail folder you should find one named MessageUidsAlreadyDownloaded3, but look in each POP account folder also. There if you find any other, including MessageUidsAlreadyDownloaded2 delete them from each POP account folder -- they are not used in versions of Mail later than 2.1.3.
Relaunch Mail and test.
Ernie

Can't Print After Snow Leopard Upgrade

I have a home network centered around an Apple Airport Extreme Base Station. The base station is wired to a Linksys network switch which, in turn, is wired to two computers - an Apple Dual G5 running OS X 10.4.11 and a and Mac MIni which, until yesterday was running Leopard. I have an HP Laserjet P1006 connected to the USB port of the AEBS and, until yesterday, everything worked fine. Yesterday, I ran the Snow Leopard Upgrade on my Mini and now the Mini won't print to the HP over the network. If I connect the printer directly to the MIni, it works fine; as soon as I reconnect the printer to the AEBS, the Mini will no longer print. The lights on the printer will flash but nothing comes out. I have downloaded the HP Printer driver update from Apple but this didn't help. I have reset the AEBS, to no avail. The G5 running Tiger has no problems with printing. And, my daughter just got a brand-new MacBook Pro loaded with Snow Leopard from the factory and she can print to the HP over the network without any problems.
Any ideas?

When I upgraded iMac from Leopard to Snow Leopard 10.6 it also stopped printing wirelessly to Brother MFC6490CW.
I thought I had this same issue with my Epson printer when wireless printing. Actually, in SL, wireless printing is very slow at least with an Epson. Takes about 5 minutes or so for wireless print to even start. When checking the printing status app, it will start out saying "printer ready." Then after a few minutes it will say "looking for printer." A few minutes later it will say "printing."
When I go into the next room where the printer is, the green light is "flashing" letting me know that "printing" has started.
So I guess what I am trying to say is to check the printing status app after you click "print." It's possible "Brother" is just as slow as "Epson."
Message was edited by: CMCSK

PS3 and Safari crashes after Snow Leopard upgrade

How is everyone enjoying the crashes after their Snow Leopard upgrade? I can't save a photo using PS3, or download a photo to flickr or facebook without a crash. PS3 crashes, Safari crashes and work flow is at a crawl? Spoke with tech yesterday and they told me that this would stop if I downloaded Snow Leopard again, which I did, but the problem wasn't resolved. To top it off, I lost permissions on the iMac and can't use the computer. Please tell me where all of the accolades came from? Were the reviews done by people who actually work on their computers or by people who play on them? Oh, and another thing, lost my wireless access to the router and had to start all over. Be careful here, this has not been fun!

Excuse me, I meant to write CS3 instead of PS3.

Finder search "aliases" missing after Snow Leopard upgrade

I'm dealing with a crazy annoyance after upgrading from Leopard to Snow Leopard - currently running 10.6.2
I have 2 duplicate, external, 1TB WestDig Drives. I have no problems accessing these drives from the Finder, but if I use Finder search or Smart Folders, the corresponding folders on the external drives never open on the first try. I always receive the message:
+The alias “…” can’t be opened because the original item can’t be found.+
On the second try, search result folders open fine and I don't seem to have any further problems with a folder once it has been opened successfully from within search.
It seems that after my Snow Leopard upgrade every search on the external drive reveals "missing" folder aliases although the "aliases" appear as regular folder icons.
I tried re-indexing Spotlight but this did not solve the problem. I also trashed my plist files for Finder and Spotlight which didn't help either.
External Drive volume info from Terminal:
+drwxrwxr-x 21 782 Mar 14 17:18 PHOTOGRAPHY ARCHIVE+
FWIW I've found others having similar problems on the Apple forums HERE and HERE. I've tried their suggested PathFinder workaround without success.
This is driving me bonkers because it renders Smart Folders somewhat useless. Additionally, these external drives work fine on my old installation of 10.5 Leopard
Thanks for any help!

HI,
Try repairing disk permissions...
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Slow to print after snow leopard upgrade

iMac Intel Core 2 Duo 2.4 GHz with 4GB of 667 MHz DDR2 SDRAM printing slowly to HP printer after upgrading to Snow Leopard. I have upgraded other iMacs and have not had any problems with printing. Any thoughts or suggestions?

It spools slowly. It took almost 20 minutes for a 3.5x2 business card in black ink to spool & print. This happens when printing from InDesign CS4 and Quark 7 to the HP 5200tn but not to our Canon iR 2550. She said it also can do this when making a pdf. Yesterday it ran smoothly in the morning but very badly in the afternoon. It actually asked her to put in a password to print to the HP yesterday. Very strange. Not sure what to make of it. Thanks for the help.

Printing problems with Epson printer after snow leopard upgrade? I can print but text does not come out properly

I have upgraded my macbook to snow leopard and have spent ages downloading updated drivers etc. but still can't print properly to my Epson SX515W printer. I am losing half the text on each line and nearly all of the first few lines. Anybody experienced this and found a fix ?

I have upgraded my macbook to snow leopard and have spent ages downloading updated drivers etc. but still can't print properly to my Epson SX515W printer. I am losing half the text on each line and nearly all of the first few lines. Anybody experienced this and found a fix ?

Trackpad Sensitivity Issue After Snow Leopard Upgrade

I have a Late 2008 MBP/2.53 Ghz and prefer to use tap to click/2 finger secondary tap.
After upgrading to Snow Leopard (to v.10.6.6 as a clean install), linked webpages and files/folders often open when a second finger touches the trackpad accidentally even when pressed very gently.
The same happens if a third finger touches the trackpad if I am scrolling through a page with 2 fingers. Sometimes when pausing/hovering over a link, part of the page surrounding the hyperlink will highlight and can sometimes the link will activate without any additional accidental touch. I have slowed down the tracking and double click speed in preferences, but this makes no difference.
The funny thing is, some days the problems are worse than other days, the trackpad seems to have a mind of it's own! These issues never happened with Leopard, and it is very frustrating.
Post SL upgrade, I have also noticed that the Magsafe adapter sometimes needs a little wiggle before it will start charging, and occasionally, the red 'close' symbol at the top left of the page does not always activate and I have to start tapping elsewhere before trying to close the page again.
My parents have SL installed natively on their MBP (Spring 2010), and their MBP does not encounter any of these problems.
Disk Utility shows Javavirtualmachine differences, which I trust can be ignored as the differences are non critical, or could these issues be having an effect on SL?
I have AppleCare which expires in November and I want this sorted out asap. I could just revert back to using Leopard, but as I have paid £30 for Snow Leopard it would be a waste of money.
I'm not sure whether my AppleCare cover these issues seeing as SL wasn't natively installed on the Mac when purchased?
If anyone can help with these issues it would be very much appreciated.
Many thanks

After installing SL, i cannot get wellsfargo "account login" to work for any account of mine, other financial secure sites work fine, i.e. fidelity or vanguard, I can access the main screen of wellsfargo but login fails ... screen i get says Safari can't connect to the server and as follows: "Safari can’t open the page “https://online.wellsfargo.com/das/cgi-bin/session.cgi?" plus some more gibberish stuff.... i tried switching to firefox and it works fine .... never had any trouble before ..... tried safari reset, safari empty cache, and maintenace that applied ...... still no luck!! hope they get this bug fixed , my other computer an older mac mini works fine. any help????? never had any problem before SL

Photoshop not seeing fonts after Snow Leopard upgrade

This is probably elementary but since changing to Snow Leopard I had to copy fonts into the InDesign fonts folder to access to more than a limited range. However, I am having same problem with Photoshop but don't know how to fix this as I can't find a fonts folder. I am using CS3. Any thoughts?

"So, you're saying that the only way to install snow leopard is to do a clean install and not an upgrade? If so, that would be a horrible horrible thing."
I'm not saying performing fresh installs from scratch is the only way, just the only smart way.
Yeah, it's a pain and takes more time but I'd rather spend the time up front than wasting time tracking down frustrating problems down the road. A healthy OS is vital to a smooth running system - everything lives or dies by the OS. I want to be sure nothing gets in the way of it running as best as it can. Simply replacing bits here and there and leaving old prefs, caches and miscellaneous crud in place via the Upgrade method instead of starting from scratch is a recipe for problems, IMO. It's like painting a bathroom with mold problems. The easiest, fastest way is to simply paint over the mold - it will look fine for a while, but of course the problem is still there. There are no shortcuts.
If nothing else, a fresh install gives you piece of mind that the OS install is not a suspect when problems develop.
As I said, I'm not experiencing any slowness (or crashing), at all. In fact, PSCS4 seems more stable in 10.6 than 10.5. In Leopard, CS4 would frequently crash on me (CS3 was rock solid). I haven't experience a single crash in SL/CS4 - not even the stupid crash-after-quitting that was as regular as clockwork.
If you want to continue to troubleshoot your problem (which sounds fairly severe), I'd suggest running the very latest version of DiscWarrior. Personally, I know what I'd do. ;-)
-phil

Awful Color on Epson 2200 after Snow Leopard Upgrade

I'm an experience photographer and printer who has done extensive printing on the Epson 2200 under previous versions of the OS using CS4. As a beta tester for Snow Leopard I had used it extensively on another machine before the release, so I did not hesitate to upgrade my photography production computer as soon as it was available this past weekend.
The problem I now have is that print colors are all wrong - very greenish (bluish?), which is typically a symptom that nothing is managing the printing out of PS. (Reddish/purplish prints are often a symptom that color is being managed by both PS and the printer's own software.) I have changed nothing else in my workflow or printing process besides doing the upgrade - I have a solid workflow process that works consistently and accurately, or should I say it DID work so until the upgrade.
I have installed the updated 2200 drivers from the Epson web site. I have removed and re-added the printer in the preferences panel. Still no joy.
Help? Advice? Anything to try that I haven't thought of yet?
Thanks in advance,
Dan

Thanks for offering a possible solution - but it doesn't work if one prints in the recommended way out of PS CS4 and lower. The normal and correct way to print is (as the person following your post mentioned) to select "Photoshop Manages Colors" by selecting this option in the first print dialog box, click the "Print" button at the bottom left to bring up the next "Print" dialog window, use the "Color Management" tab and select "No Color Adjustment."
The awful print is just as it was before the process you described, I'm afraid.
Are you perhaps choosing "No Color Management" in the first print window and then "Color Controls" from the "Color Management" dialog in the second window? This turns color control over to the printer, which is not the best or most accurate way to print. With this option I do, as I mentioned earlier, get a print that is "less awful" than the horribly bad dark green/blue and unusable version when I print the correct way - but the colors are not right. The effect may be subtle if you are not very critical about printer output, but I'm comparing a print made a few days before the upgrade to the best I can get using this second-best method and the print is noticeably bluer and darker - not consistent with the print output I need.
The Gutenberg option sounds interesting, but I have yet to hear of anyone getting a simple and consistent method of precisely duplicating the results using the normal "Photoshop manages colors" approach. And with high quality printing, consistent and predictable results are absolutely critical.
One person reported online that he had contacted Epson, whose representative told him to "get a new printer - do you expect us to support a printer that is six years old!?" Very bad attitude and awfully poor customer support if true. If I ask Epson today how long their new printers will last, do you think they'll tell me "no more than six years after the printer was first introduced?" And don't forget that most of the prints were not purchased on the day of introduction "six years ago," but were purchased perhaps several years after that. If this continues to play out this way, one would be very wise to reconsider purchasing any Epson printer but the very newest model right after introduction - and it might be a better idea to compare support with other manufacturers of excellent photo printers. HP photo printers are every bit as good as Epson and Canon has been doing an increasingly fine job recently.
It also doesn't help that the Epson site is completely silent on the subject of this and many other printers relative to Snow Leopard. I would not like it, but if they really don't intend to support the 2200 and other printers, where is the list of those that they no longer support? (Apple issues such a list from time to time.)
Dan

Printing slow after Snow Leopard Upgrade

Similar Messages

Maybe you are looking for