Printing Smartform on Letterhead Duplex
Hi,
I have a 2 page smartform that I am printing onto a letterhead and the paper is loaded so that the letterhead is aligned. I have now created another 1 page smartform, but when I print it it appears on the reverse of the letterhead.
The printer is set as duplex in SPAD and I have tried changing the print mode on each page, but I cant seem to reverse the 2 page smartform, or get the 1 page smartform on the opposite side.
What is the best way to do this?
Thanks,
Sam
Seems this was not an issue with the Smarform but the way the printer works as printing from Word had the same result. I inserted a blank second page to make it print on the correct side.
Similar Messages
-
Smartforms output in Duplex mode
Hello Gems,
I have defined 3 pages and i had set all the pages to duplex mode.
I need to print set of instructions in my smartform output in duplex mode (front & back of page)
Page1 : next window is Page 2 and i have a command to print Instructions (page INST)
Page2 : next window is blank(or page 2) and i have a command to print conditions (page INST)
Page INST : Does not has main window and next page is Page 2.
My pages flow in the following way:
page1>Page INST>Page2
Page 1 & 2 have main windows.
I need to see the INSTRUCTONS on every page that is printed with data. But i am getting an extra page that is blank
with no INSTRUCTIONS at the back.
when i print, i am 1st page properly but also getting an xtra blank page with no INSTRUCTIONS on the back.
Can some one suggest me ?
Thanks
DanHi,
Define a first page named FIRST for a form to be printed in duplex mode. You therefore set the Print mode in FIRST to D.
To make the duplex printing work correctly, you must define a second page FOLLOWER in which Print mode is left empty. In the form definition, you specify FOLLOWER as the follow-on page for FIRST and for itself as well.
Your text is then printed in duplex mode. FIRST switches the printer to duplex mode and forces printing of the first page on the front side of a new sheet. FOLLOWER accepts the duplex mode and sends no further mode print controls to the printer. The printer therefore alternately prints FOLLOWER pages on the fronts and backs of sheets.
For more details please refer to the below limk
http://help.sap.com/saphelp_nw70/helpdata/en/d1/802e77454211d189710000e8322d00/frameset.htm
Thank U,
Jay.... -
Error while printing smartforms
Hi Friends,
I am getting error "<b>Invalid value for parameter ARCHDEST</b>" while printing smartforms. This is happening only in IDES server. In Development the same smartform is working normally. I have checked in transaction SU53, to see whether all the authorisations have been given for IDES server. There is no problem in authorisation also. So what might be the reason for this. Please give me the solution to solve this problem.
Thanks & Regards,
RanjithHi Beginner,
In the layout you have taken window or layout taken the big width in that case only you will get this type error syntatically it shows correct when you exicute the smart from try to give the print or see the print preview you will get this error (suggestion is better to check the window sizes)
Thanks
Ashok -
Problem while printing smartform in dot matrix printer
Hi Experts,
When i am printing smartform using dot matrix printer only the last page prints but all the pages displays in print privew.
For example suppose there are three pages to be print 1/3, 2/3 , 3/3 , i get all the three pages in print privew as well as when i take its printout in laser printer i get all three pages as print, but when i am using dot matrix printer i get only the last page ie 3/3 as print.
Regards
Varun SharmaHai Varun,
If things are coming properly then its no more ABAP issue.
Need to check out with the BASIS team along with the IT / hardware department.
Just try to take print out on a other dotmatrix printer, if its somewhere close to you as usually they are heavy and large in size can't be moved.
Hope this helps,
Cheers,
Suvendu -
How to print PDF few pages duplex but not all from one PDF Doc?
Hi,
We have a desktop application that we use and it gives instructions to printer which document to duplex and which to not. For easy understanding, in a PDF if there are 10 pages, i want to take first two pages whenever they are printed they go on duplex rest of 8 pages should print without duplex. I have a PDF of these 10 pages document and want to send via email to one, so that if he has duplex printer, he just send that PDF doc to printer and it automatically send first two pages duplexed then rest of 8 pages per paper. So finally he get 9 printed hard copies. My question is, is there any capability in PDF document we can apply per page that when go on printer it instructs to printer to duplex me or not. Like we have PDF properties associated with doc. Can we setup such property for each page? I know this is not a good question, but our business requies to send PDF to customers and we do save this to do ourself, How customer know which page to duplex then?
If there is any automated solution we can give to customers? The PDF each page take decision by its own when going on printer it says i have to go on back of the paper and the other says i won't have to be duplexed?
Shamshad Ali
[email protected]I see you are using Dietmar Aust's JasperReportsIntegration kit. Check out following tutorials on how to call your report from APEX:
http://www.opal-consulting.de/downloads/free_tools/JasperReportsIntegration/Opal-Consulting-JasperReportsIntegration.pdf (page 32 - 33)
https://www.opal-consulting.de/apex/f?p=20090928:9:::NO:9::
These sources should be sufficient to successfully call reports from an APEX application.
Feel free to ask more information in case you're experiencing difficulties... -
Printing SD Documents in DUPLEX mode
Hallo,
i have a big trouble. If i want to print all pages in DUPLEX mode (via change in SE71), first page is printed separately in SIMPLEX mode(all of these pages are set to DUPLEX mode).
Standard attributes are: FIRST page then LAST page.
Please help, thanksHi,
I don't know, but a weird guess is:
Is it S/w-realeted issue or H/w-related..
I think its printer-relaed.
Contact with your Admin - SAP as well System, in company itself.
Best regards,
Amit -
Hello Experts,
I am developing new SMARTFROM.
Requirement: On entering the Personnel number(s) on the selection it should print SMARTFORM. for one entry there are two page. so for 2 entries it should show 4 pages. It should work like mass printing.
Error: currently it is working for single entry. but when i entered multiple enteries on selection-screen in print-preview i can see only 2 pages for first. for viewing second entry i need to comback to Printer specification page.
how do i achieve if i enter 2 entries on selection-screen in print preview it should show 4 pages.
ie. for 1st entry two page and for 2nd entry last two page.
Regards
Saurabhcheck the following code, the control parameters need to be changed accordingly.
LOOP AT it_acct.
AT NEW kunnr.
READ TABLE it_acct INDEX sy-tabix.
READ TABLE it_kna1 WITH KEY kunnr = it_acct-kunnr.
READ TABLE it_adrc WITH KEY addrnumber = it_kna1-adrnr.
IF sy-subrc = 0.
wa_adrc = it_adrc.
READ TABLE it_landx WITH KEY land1 = it_adrc-country.
IF sy-subrc = 0.
l_landx = it_landx-landx.
ENDIF.
ENDIF.
CALL FUNCTION 'ZSDG_COMPANY_ADDRESS'
EXPORTING
i_bukrs = it_acct-bukrs
IMPORTING
o_comp_addr = g_comp.
REFRESH it_acct1.
IF g_over = 'X'.
r_duedt-sign = 'I'.
r_duedt-option = 'LE'.
r_duedt-low = date.
APPEND r_duedt.
ENDIF.
LOOP AT it_acct WHERE kunnr = it_acct-kunnr AND duedt IN r_duedt.
MOVE-CORRESPONDING it_acct TO it_acct1 .
APPEND it_acct1.
CLEAR: it_acct,it_acct1.
ENDLOOP.
c_nofopr = c_nofopr + 1.
* t_control_parameters-DEVICE = 'LP01'.
t_control_parameters-no_dialog = 'X'.
t_control_parameters-preview = 'X'.
IF c_nop <> 1.
CASE c_nofopr.
WHEN 1.
t_control_parameters-no_open = ' '.
t_control_parameters-no_close = 'X'.
WHEN c_nop.
t_control_parameters-no_open = 'X'.
t_control_parameters-no_close = ' '.
WHEN OTHERS.
t_control_parameters-no_open = 'X'.
t_control_parameters-no_close = 'X'.
ENDCASE.
ENDIF.
IF doct = 'X'.
doc = 'X'.
ELSE.
doc = 'Y'.
ENDIF.
CALL FUNCTION lf_fm_name
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
control_parameters = t_control_parameters
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
* OUTPUT_OPTIONS =
* USER_SETTINGS = 'X'
g_comp = g_comp
wa_adrc = wa_adrc
landx = l_landx
p_seldate = date
waers = waers
doc = doc
intrvl1 = intrvl1
intrvl2 = intrvl2
intrvl3 = intrvl3
intrvl4 = intrvl4
g_over = g_over
TABLES
it_acct = it_acct1
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
* EXCEPTIONS
* FORMATTING_ERROR = 1
* INTERNAL_ERROR = 2
* SEND_ERROR = 3
* USER_CANCELED = 4
* OTHERS = 5
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDAT.
ENDLOOP. -
How to print Smartform in Draft mode.
HI all,
we are using Wipro LQ DSI 5232 printer, our problem is while printing smartform , its coming in Roman but it should come in Draft Mode.
When it goes to Roman mode the printing become very slow.
How to set in default Draft mode.
Regards,
Rahul.Hi,
there is an SBO setting inside
Administation>System Init>Print preferences>Print Draft Watermark on Draft
Then a "DRAFT" watermark will appear if it's printed before adding.
In CR use a stored proc to get data back according to the Objectid@.
Then if its the object id of a draft then add a CR watermark.
Hope this helps.
Regards,
D -
OfficeJet 6500A - won't print correctly on letterhead
OE Vista
I am trying to print on a letterhead which has about a 3 inch dark picture at the top. The printer acts as if it is sensing the picture and it does not start printing until about half was down the page. It doesn't matter if I print directly from the program or if I put an original on the glass and try to make a copy onto the letterhead. There must be a setting I need to change but I can't find it.
THank you,Does it only do this when you use the letterhead, or does it happen with other types of paper?
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
How to print smartform on both side of pages.
Hi,
I have requirment of printing the smarform on both side of the page. for example the header data and item date on front of the page and terms and condition on the back of the page... can anyone help wht printer settings and wht changes in the smartform needed... its very urgent pls help ASAP.
Thanks in advance.
Abhishek Pandey.Hi Abhishek,
In PAGE node u have Output Options Tab.
In Output Options U can find the field Print Mode
There u need to give the D.
Default: No change of print mode
S Begin new page in SIMPLEX mode (single-sided)
D Begin new page in DUPLEX mode (double-sided)
T Begin new page in TUMBLE DUPLEX mode (double-sided)
DUPLEX:
The current print mode is set to DUPLEX (double-sided print, long-edge
binding) and a new page is started. A form page defined with DUPLEX is
always printed on the front of the page, never on the back of the page.
If the next form page contains the attribute value DEFAULT, it is output
on the back of the page.
Best regards,
raam -
Printing of data in duplex mode
Hi Friends
I am having some problem working with smartforms. I have desined two pages.
1. page1 with main window
2. PAGE 2 for terms and conditons.
I have to print data such that terms and conditions on every page backside.
Problems is: Terms and conditons are being printed on every page back except at the back of *last* page. I hope u understand my issue and reply me soon.
Thanks.
Edited by: raghavendra bysani on Jan 19, 2008 6:07 PMHi,
I don't know, but a weird guess is:
Is it S/w-realeted issue or H/w-related..
I think its printer-relaed.
Contact with your Admin - SAP as well System, in company itself.
Best regards,
Amit -
Printing multiple files in duplex mode: second on the back side
Hi,
I am having a strange problem. I use Snow Leopard on a Mac Book Pro. Typically, I use
duplex printing. This works fine. The only issue is: if I print two different documents and the back side is
free after the first page, then the second document is started on the BACK SIDE of the first.
This is of cause VERY annoying. I tried various options. Both in the print menu and using CUPS. They had no effect.
This happens both at home (using a SAMSUNG CLP 550) and at work (through a windows printer server) to a Dell Multifunction printer.
Now, I am basically out of options. Does anybody have a hint what this good be and how to repair duplex printing?
Thanks
KlausHi,
thanks a lot for helping. It would be pity if this can not be corrected. After all this is no magic.
(Regarding Windows: my printer at home is certainly not high-end...
and the machine at the office was cheapest we could get from Dell with the functionality.
But this is a side issue, as I want to go Mac only. - I am still running continuously a Windows-VM and
I want to get rid of this. Would be a pain to do printing with Windows always.)
Inserting pages is not possible for PDFs. - And this is actually a major part of my prints..
Cheers
Klaus -
How to print smartform from a report
Im displaying a report, which contains several documents, whereby which ewch document is connected to a smartform.
The page displaying the report contains a button 'Print'
When clicking on the Print button, all the documents in the report should be printed.
But my program is creating a spool file of the report, which will be printed further - its not what I want
I want the program to print the smartforms of each documents on the report directly.
heres my code and I dont know what I should do to be able to print the smartforms directly
Get the function module name of the smartform.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = '/EU000/FI_PRINT_DEBIT_NOTE'
IMPORTING
fm_name = g_fm_name.
gw_options-tdnoprev = ' '.
gw_options-tddest = 'LOCL'.
gw_options-tdprinter = 'LOCL'.
gw_options-tdnewid = 'X'.
gw_options-tdimmed = 'X'.
gw_control-preview = ' '.
gw_control-no_dialog = 'X'.
write: text-006,' ', text-007, ' ', text-008.
write:/.
For all the documents
LOOP AT gi_all_data INTO gw_all_data.
write: gw_all_data-gjahr(4), ' ',gw_all_data-belnr,' ', gw_all_data-belnr.
write:/.
CASE SY-UCOMM.
WHEN 'PRINT'.
Call the smarform
CALL FUNCTION g_fm_name
EXPORTING
gw_all_data = gw_all_data
user_settings = ' '
output_options = gw_options
control_parameters = gw_control.
WHEN 'BACK'.
LEAVE SCREEN.
ENDCASE.DATA: x_control_parameters TYPE ssfctrlop,
x_output_options TYPE ssfcompop.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_prin LIKE usr01-spld.
SELECTION-SCREEN BEGIN OF LINE.
INITIALIZATION.
SELECT spld
FROM usr01
INTO p_prin UP TO 1 ROWS
WHERE bname = sy-uname.
ENDSELECT.
START-OF-SELECTION.
x_output_options-tdimmed = c_x.
x_output_options-tddest = p_prin.
x_output_options-tdnewid = c_x.
x_output_options-tdreceiver = sy-uname.
x_output_options-tdcopies = '001'.
x_control_parameters-device = 'PRINTER'.
x_control_parameters-no_dialog = c_x.
x_control_parameters-langu = sy-langu.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'Z_SMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = f_name1
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF P_PRI = 'X'.
CALL FUNCTION F_NAME1
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = X_CONTROL_PARAMETERS
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = X_OUTPUT_OPTIONS
USER_SETTINGS = 'X'
wa_header = wa_zmexh51
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
tab_item = TAB_ZMEXD51
tab_item1 = TAB_ZMEXS51
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSEIF P_PRE = 'X'.
CALL FUNCTION F_NAME1
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = X_CONTROL_PARAMETERS
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = X_OUTPUT_OPTIONS
USER_SETTINGS = 'X'
wa_header = wa_zmexh51
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
tab_item = TAB_ZMEXD51
tab_item1 = TAB_ZMEXS51
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
Check the above code its just similar requirement it may helpful to you.
Thanks,
Phani. -
Header problem with photosmart 8180 when printing with company letterhead
I print many letters through MS Word 2003. When I print a letter on plain paper, it looks fine and is the correct distance (1 1/2") from the top of the page(s). Our letterhead consists of a 1" dark band with our logo included and our address across the bottom of the page. I then insert our letterhead to print a final, the printer moves the letter (date, name, address and body) down another 1", meaning the printer is using the bottom of the band to measure the top margin. It also ignores the bottom margin of 1" and just prints into the address, instead of going to the next page. Both types of paper are the same 8 1/2 X 11.
We have Konica network printer and I previously had a HP 930 printer and never have seen this before. I have uninstalled the printer and reinstalled and the only change I have made since is to change the the paper type, under "Print", "Properties", "Features", "Paper Type", from Automatic to Plain Paper. Neither helps.
I have an extended email list with HP Customer Care, telling me everything from installing a 990C driver (or virtual printer?) to have me check to make sure I knew how to load paper.
I then spent over an hour on the phone with an HP rep and even gave him control of my computer, to no avail. He thinks he fixed the problem by having me reduce the top margin, to say 1/2" and basically trick the printer into printing at the correct place below the band, but the second page is now too far up because of that.
I hope someone can help. I found it hard to believe that this has only happened to me.
Thanks for any help.
DeanHello,
at first, what kind of intemec priter do you use? Is it host or stored ipl mode?
value for intermec pm4i in host mode:
my suggestions is the labelsoftware for this printer and the addon tool for r3.
Best regards,
Nino -
Printing Smartform for a series of data
hello People,
i am stuck up in a situation which sums up like this
i am having a range of check numbers for which the details of checks have to be printed.
the req is all the check between the range has to be printed in that many pages and printer should be assigned once only
that is for 10 checks smartform should have 10 pages.
the code i have designed is mentioned below
it is working fine in terms of execution, the only problem is that
only the last check in the range is showing in the preview.
all other are bieng overwritten.
in the debugger i can see the values for all checks being assigned.
<u><i><b>the thing is i want the first time the loop execute it should print check in first page
the next time the loop executes it should print check in second page
and so on till the tenth.</b></i>.</u>
<b>few points i wud lik to mention :
its not the standard check format, so dont think in dat direction,
the whole content including the main and secondary window is changing not just the table in main window</b>
please help
here is the code i devised
upper = upper.
lower = lower.
itab = itab.
select chect
from payr
into table itab
where HBKID EQ BANK
AND CHECT between lower and upper.
break-point.
DATA: l_char18 TYPE char18,
l_p TYPE p DECIMALS 2.
loop at itab into wa_itab.
SELECT SINGLE zbukr
hbkid
hktid
rzawe
chect
lifnr
kunnr
ubhkt
vblnr
zaldt
waers
rwbtr
pridt
zanre
znme1
FROM payr
INTO wa_payr
WHERE chect EQ wa_itab-chect
and hbkid eq bank.
IF sy-subrc EQ 0.
SELECT SINGLE lifnr
adrnr
FROM lfa1
INTO wa_lfa1
WHERE lifnr EQ wa_payr-lifnr.
SELECT SINGLE addrnumber
date_from
nation
name1
name2
name4
city1
post_code1
po_box_loc
street
tel_number
region
FROM adrc
INTO wa_adrc
WHERE addrnumber EQ wa_lfa1-adrnr.
SELECT bukrs
belnr
gjahr
buzei
augbl
shkzg
mwskz
dmbtr
qbshb
FROM bseg
INTO TABLE it_bseg
WHERE augbl EQ wa_payr-vblnr
AND shkzg = 'H'.
IF sy-subrc EQ 0.
SELECT bukrs
belnr
gjahr
xblnr
FROM bkpf
INTO TABLE it_bkpf
FOR ALL ENTRIES IN it_bseg
WHERE belnr = it_bseg-belnr.
LOOP AT it_bseg INTO wa_bseg.
READ TABLE it_bkpf INTO wa_bkpf
WITH KEY belnr = wa_bseg-belnr.
wa_disp-billno = wa_bkpf-xblnr.
wa_disp-amount = wa_bseg-dmbtr.
l_char18 = wa_bseg-dmbtr.
SHIFT l_char18 LEFT DELETING LEADING space.
wa_disp-amount = l_char18.
l_p = wa_disp-amount.
CLEAR wa_disp-amount.
wa_disp-amount = l_p.
CLEAR l_p.
SHIFT wa_disp-amount LEFT DELETING LEADING space.
wa_disp-tdsamt = wa_bseg-qbshb.
l_char18 = wa_bseg-qbshb.
SHIFT l_char18 LEFT DELETING LEADING space.
wa_disp-tdsamt = l_char18.
l_p = wa_disp-tdsamt.
CLEAR wa_disp-tdsamt.
wa_disp-tdsamt = l_p.
CLEAR l_p.
SHIFT wa_disp-tdsamt LEFT DELETING LEADING space.
APPEND wa_disp TO it_disp.
CLEAR wa_disp.
ENDLOOP.
ENDIF.
ELSE.
MESSAGE 'Entered Cheque No is Incorrect' TYPE 'E' RAISING exc1.
ENDIF.
endloop.
help people
thanks & regards
Nitinhi Nitin
just give a try with this .
create one loop and for that give your int_tab which holds the records of all the checks say 10 checks.
also create one program lines wherein you l set the flag to 1 whenever the itab count increases if not then set the flag to 0.
now inside the main window create one command node and check the go to new page checkbox and give your second(or next page) name , and in the conditions tab keep the flag = 1.
the extra work you need to do is you have to create one next page with all the same windows which will triggers for evry new line item.
hope it may be helpful to you.
plz reward points if helpful
Regards
Zarina
Maybe you are looking for
-
InDesign CS5 Fails on Start Up on iMac Snow Lepoard.
When trying to start InDesign it gets to a point "Setting up Service Registry" and then fails. We appreciate your earliest response. Thank you. Regards.......Don Below is the Error Report: Process: Adobe InDesign CS5 [21377] Path:
-
Best suggestions for Windows content creators?
All of our iTunes U admins are using Macs, so getting the initial uploads of data for our iTunes U site is not a problem. However, we have decided to decentralize content creation/control to individual departments, and many of those reps use Windows.
-
Xsl fo doubt for instr function
Can anyone please advice if I can use instr and substring functions in xsl fo? my issue is that i have a lon email address which needs to be wrapped up in 2 lines Always my email ends with 'v' So I tried to do this <xsl:value-of select="substring(BUY
-
Your pdf coverter product does not work as you promised
no discussion to it, I bought the pdf converter program it does not do as advertised
-
I updated from the previous version of Mavericks only to encounter multiple issues. -Safari will not maintain a stable window. It relaunches three times then fails. -Finder windows crash/fail. Having read throughout previous posts I tried t