Printing Stopped - The file '/private/var/spool/cups/tmp/..... could not be ...

I can't get anything to print.
I have reinstalled the OS Yosemite and reinstalled the Kyocera printer driver and also deleted and reassigned the default printer... no luck.
I also repaired permissions several times. Also ran ONYX to run maintenance scripts and repair permissions again etc... still no luck.
I checked my printer IP address and it is set the same as another workers computer next to me. so the settings are not the issue either.
---- puzzled.

The print system reset did not work.
the error log says this...
D [30/Apr/2015:14:31:23 -0500] [Job 7] PID 2104 (/usr/libexec/cups/filter/kyoprefilter_C) exited with no errors.
D [30/Apr/2015:14:31:23 -0500] [Job 7] PID 2107 (/usr/libexec/cups/filter/kyofilter_C) exited with no errors.
D [30/Apr/2015:14:31:23 -0500] [Job 7] PID 2108 (/usr/libexec/cups/backend/lpd) exited with no errors.
D [30/Apr/2015:14:31:23 -0500] [Job 7] Set job-printer-state-message to "The file ‘/private/var/spool/cups/tmp/008395542c9f5’ could not be opened.", current level=ERROR
D [30/Apr/2015:14:31:23 -0500] [Job 7] PID 2105 (/usr/libexec/cups/filter/cgpdftops) stopped with status 1.
D [30/Apr/2015:14:31:23 -0500] [Job 7] Hint: Try setting the LogLevel to "debug" to find out more.
D [30/Apr/2015:14:31:23 -0500] [Job 7] The print file is empty.
D [30/Apr/2015:14:31:23 -0500] [Job 7] PID 2106 (/usr/libexec/cups/filter/pstops) stopped with status 1.
D [30/Apr/2015:14:31:23 -0500] [Job 7] Hint: Try setting the LogLevel to "debug" to find out more.
D [30/Apr/2015:14:31:23 -0500] [Job 7] End of messages
D [30/Apr/2015:14:31:23 -0500] [Job 7] printer-state=3(idle)
D [30/Apr/2015:14:31:23 -0500] [Job 7] printer-state-message="The file ‘/private/var/spool/cups/tmp/008395542c9f5’ could not be opened."
D [30/Apr/2015:14:31:23 -0500] [Job 7] printer-state-reasons=none

Similar Messages

Printer: can't create PDFDocumentRef for `/private/var/spool/cups/tmp/'

Just moved from Tiger to leopard 10.5.2
Using an Hp deskjet 3650 which worked last week in Tiger. Now, no matter what I try to print, I get errors like the following:
can't create PDFDocumentRef for `/private/var/spool/cups/tmp/480cbc6235144'
To the best of my knowledge, I installed every possible printer driver from the DVD

OhhhhKayyy ... I went to http://tinyurl.com/3r8d85
a ww1.hp.com address ...
installed /OSXHPInkjetInstaller.dmg
tried same print and get same failure:
first I get this:
/usr/libexec/cups/filter/pstopdffilter failed
then the topic error named

Private/var/spool/cups/cache/rss

The folder 'private/var/spool/cups/cache/rss' is referenced quite a bit on Google regarding a common privileges warning that occurs for many people. Yet nothing that touches on what the files in this folder do.
What is the function of this RSS folder in OSX?
Thank you.

My final question has been asked dozens of times, yet I've yet to find an answer that satisfies my curiosity.
The common permissions error:
"Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x ."
occurs for many. The popular opinion is that this is harmless and should be ignored. Fine, yet I'm still wondering why and how it happens so much.
The change from drwxr-xr-x to drwxrwxr-x reflects a group write privilege that does not exist in it's default state.
Why and how does this happen?

`/private/var/spool/cups/d00449-001' has permissions that do not allow printing!

I´m using hp photosmart c309c under Mac OS 10.5 via wifi-network. Till yesterday everthing went correct. From today I get a message:
Printererror:
/private/var/spool/cups/d00449-001' has permissions that do not allow printing!
What does that mean?
Is anyone able to help me
Thanks
Dieter

Try restarting your Mac, then reseting the printing system:
- Sys Prefs, Print & Fax
- Right (control) click the print queue area and select Reset Printing System.
- Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

CDD-23564: The file "c:\orant\BIN\cfg61.dll" could not be loaded or does not exist.

Hi
When I try and generate a form from Designer 6i i get the following error message :-
CDD-23564: The file "c:\orant\BIN\cfg61.dll" could not be loaded or does not exist. However the file does exist in the specified location. I've looked thru the on-line documentation and checked the registry but can't see anything obvious. I've got the following configuration on my machine :-
Oracle 8i (version 8.1.6) - Windows NT 4
Designer 6i (version 6.5.52.1.0)
Any advice would be welcome.
Thanks
null

I think you would install the ORACLE FORMS 6i.

Error /var/spool/cups incorrect permissions

Does anyone know how to fix this error I get when printing
The file `/private/var/spool/cups/tmp/012c5512ac322' can not be printed because of incorrect permissions
The print file spools and then errors and nothing prints. It is happening with my HP Laserjet 400 M401dn monochrome printer, but not any other printer.
It will print some files but not emails or PDFS
I've upgraded the printer driver and firmware, uninstalled the printer and reinstalled it. Rebooted everything.
I'd be VERY grateful for any help

Ok I finally fixed it.
I have upgraded the firmware, downloaded from the HP site
Then reset the printting system:
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
Yeay!

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

There may be some security issues related to the USPS PDFs.
http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
I can't help with the scan/print problem. You seem to have done everything I would try.
I don't know if maybe using a registry cleaner would help.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
Word, and powerpoint application are working fine.
Environment : Windows 7 64-bit, MS Office 2013 64-bit
Steps to recreate
(i) Create new user account and add to any group ( do not log on using this
account)
(ii) runas /user:<new user account> <fullpath>\excel.exe
it will ask password so enter on command prompt
(iii) open any excel document and click File->Print
(iv) verify result (it is failing) it pop ups below error
Error:`Microsoft Excel
No printers are installed. To install a printer click the File tab, and then click
Print. Click No Printers Installed, and then click Add Printer. Follow the
instructions in the Add Printer dialog box.

Sorry for late reply i was not at work
I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
Probably excel behaves differently from other office applications.
Probably it is a bug in excel
Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

WARNING: The File Systen "/var/log" is reaching out of Space

I have a DMM version 5.2.
When entering the DMM via SSH or console shows me the following sentence:
WARNING: The File Systen "/var/log" is reaching out of Space
How I can correct this error?
I welcome your comments.
Regards

Hi Aurelio,
If cleaning the logs does not help (which I anticipate). You may be running into a known defect, This issue happens due to the fact that the access_log does not rotate properly after it hits the size limit.
The Cisco defect # is
CSCti86040 - Access_log does not rollover or delete when clearing logs on DMM
This defect is fixed in 5.2.2 code release but you can open a TAC case and we can delete the access_log log and apply the workaround for the same.
Thanks,
Sagar Dhanrale

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

I can't import photos from a card, file or anything. I get "could not copy a file to the requested location".. This has never happened before.

I can't import photos from a card, file or anything. I get "could not copy a file to the requested location". I have never had this happen before. I use a MacBook Pro

I also have the exact same issue. New IMac, installed LR, imported approximately 900 photos no problem, across the network from a Windows PC. The import stopped when the network connection was lost. Now I cannot import for the same reason "could not copy a file to the requested location". I have plenty of disk space and i have permission to the needed folders. I cannot even import from a folder already on the IMac.

I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.

I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.

I am not aware of a way except for photos that allows you to select multiple files in an email. I even checked settings in the Adobe Reader app, and it does not show that ability.

My mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

my mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

So now that you have repeated the same thing three times that doesn't make things any clearer at all.
You are copying files from where to where?
How are you attempting to copy files, software or click and drag?
Any other detail would be helpful.
Allan

I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read"

I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read". I am able to open pdf files in IE and other programs.

I am encountering the same problem -- though with .qfx files from my bank. This worked fine in Firefox 31 ESR, but since upgrading to Firefox 33.0, I get the "<name>.qfx.part could not be saved, because the source file could not be read" when I attempt to download. (I should add that downloading PDF statements from the same site works fine, and that the qfx downloads work fine in IE and Chrome.)
I tried safe mode, it is still broken. Tried v34 beta, no luck. I reverted to version 31, it works again.
I guess I will stick with the older version until a solution is found...or just use an alternate browser to download my financial data.

Printing Stopped - The file '/private/var/spool/cups/tmp/..... could not be ...

Similar Messages

Maybe you are looking for