Printing subcontracting challan (57f4)

Hi,
where can i taKE THE PRINT OF MY 57F4 CHALLAN?
ANY CUSTOMIZATION HAS TO BE MADE?

Hi,
Check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Subcontracting Attributes > Check whether Subcon Output Type - J1IF is maintained here.
Also check in M706 - For Output Type - J1IF, under "Print" Tab Page, what is the Print param., if it is "7 Plant/storage location" then go to OMJ3 and mainatin the entry with J1IF/Plant/Storage location (keep it blank if all the sto locs of plant are to be considered)/Output Device/Name/Print Immediately/Release after output
Also check condition record for Output Type J1IF in MN22. If not there then mainatin it.
Note: - It is better to have Condition Table with "Plant" and a new access sequence needs to be created with this table and assign this to J1IF in M706. So condition record maintenance will be easier.
Thanks & regards,
Kiran

Similar Messages

  • Printing Subcontracting Challan

    Hi,
    How to print the subcontracting challan.
    What are the settings for the same.
    As i am not able to print some subcontracting challan , what could be the reason.
    Regards,
    ASHU

    Hi,
    During creation of 57F4 Challan in J1IF01, in Basic Data Tab Page, scroll down the screen, you will get a check box of "Print immediately" just activate it before saving, it will print the Subcontracting challan once you save it.
    And to re-print the same go to J1IF11 and activate this indicator again and save.
    Configuration Checks: -
    SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Subcontracting Attributes > Check whether Subcon Output Type - J1IF is maintained here.
    Also check in M706 - For Output Type - J1IF should be in place.
    Note: - There is no need of maintaining condition record for output type J1IF in MN21 and also no need to do any further configuration.

  • Multiple selection to print subcontracting challan

    Hi Gurus,
    Is is possible to have multiple selection of subcontracting challan for printing it at once similar to what we do in T code MB90 for Material Document printout.
    Regards
    Mascot

    You do not have multiple option in J1IF11/12 as in MB90 to take multiple print out.You can take only one print at a time for sub con challan.
    But with any custom process you can try it.

  • SubContracting Challan (57F4 Challan)

    Dear Experts
    I want to print the 57F4 challan through system.
    I have done all neccessary configuration & able to print the challan. Output type used in this case is J1IF.
    Now I have created one output type YJ1F by copying the above output type. Also I have copy the sap script of 57F4 challan & made the neccessary changes & assign to new output type.
    Also I have assigned new output type in sub-contracting attributes.
    still I am not able get print from the system with required changes. Also system is not giving any message.
    So please let me know if I missed out any configuration. or any constraints in regards CIN.
    Kuldeep

    Hello Kuldeep,
    I have completed this requirement for our client and here is the "how to do" SAP wiki page.
    <[http://wiki.sdn.sap.com/wiki/display/ERPLO/SubcontractingChallan57F4_J1IF01_J1IF11|http://wiki.sdn.sap.com/wiki/display/ERPLO/SubcontractingChallan57F4_J1IF01_J1IF11]>
    Let me know if needed further information.
    Regards,
    Arif Mansuri

  • Unable to print Subcontracting challan

    Dear all,
    I have created a subcontracting challan with J1IF01. now when i want to take a print out, i tick on print immediately in J1IF11 and save it no print out is generated. where as same is okay with my other plants. please help
    regards
    Ashish

    1.Use Tcode J1IF11 - display subcontracting challan. Header - postinmg tab - flag the check box print immediately & save. You can take print out.
    2. Maintain the Outout type J1IF for the excise group - SPRO - IMG - LOgisitics general - Tax on goods & movements - India - Business transactions - Subcontracting - Maintai subcontracting attributes
    In addition to that
    Maintain printer in the SPRO - IMG - MM - Inventory management - Output determination - printer determination.- printer determination by plant / storage location ( OMJ3). Here for the application area ME, condition type J1IF, assign the printer .
    IN OMJ3, maintain the J1IF sondition type, plant, Printer in output device & flag the check box Immediately & released.
    Print immediately
    Switch for printing immediately. Printing is immediate if this switch is set. Otherwise the output is held in the spool.
    Release after output
    Switch for deleting a print job. If the switch is set, the spool job is deleted immediately after printing. Otherwise it remains in the spool file after printing and can be printed again if required.
    hope this helps

  • Subcontracting Challan 57F4 details

    Hi All,
    I want to display a report for the subcontracting challans with pending status.
    like if i issue a challan for 1000 qty, then i have done a GR for 500 qty, now i want to see the report for challan number, issue qty, received qty and pending.  like that.
    Please help??
    Thanks
    Pankaj Garg

    Hi,
    Goto J1IFR, select the option Display Annexure IV option.
    You will get the required report.
    Regards,
    Piyush

  • Print subcontracting challan

    Dear friends,
    I have created a 57F4 challan using T code J1if01. How to take the print ? I am trying  T Code J1if02...but no such T code exists...what is the T code for print ?

    Hello,
    Use TCode J1IF11 - in the header detail, under the posting tab - check the print field and save the challan.

  • Subcontracting challan 57F4 reconcile issue

    Hello friends,
    When i do the reconcile the challan against the GR document no, i got the below error
    "Challan not valid, material doc., is valid for another scenario"
    why is it coming and how to rectify this error?
    regards,
    sathes

    Hi,
    Still i am facing the same error...
    i have mentioned the step as followed in below.
    1. I have created the SC challan wrt to the document no for 541 MVT.
    2. I did GR throguh migo aginst he PO wrt SC challan
    3. I have to do reconcile the challan based on the above GR document
    The above steps are right?
    regards,
    Sathes

  • Subcontracting challan printout

    Hi experts,
    Can anybody tell me T-code for printing Subcontracting challan (57F4) ?
    Also explain the procedure..
    it's urgent...

    Posting tab in the header level. In that tab, scroll down u will get this print immediately check box, flag it & save the document.

  • Printout of subcontracting challan

    good morning gurus
                my problem is that how to take print out of subcontracting challan.however i have all the necessary setting in img.
    regards
    k.chhikara

    Relax,
    Try after 5 mins as you look confused with new terminology.No problem,Rest for five minutes and then attack problem.
    Study this, this is detail config of printing subcontracting challan.
    http://72.14.235.104/search?q=cache:EXUjcQn3DnkJ:help.sap.com/bestpractices/BBLibrary/Documentation/J85_BB_ConfigGuide_EN_IN.docPRINTINGSUBCONTRACTING+CHALLAN&hl=en&ct=clnk&cd=3&gl=in
    Regards
    Kedar
    ****Reward points if useful to you.

  • Out put of subcontracting challan

    Hi Gurus
    I am facing a problem.
    I have configured diff output type for my two plant to print subcontracting challan & same i have assign in CIN setting subcontracting attributes.
    For J1IF it is working i am able to print subcontracting challan but i have created same out put type ZJIF & assign to another excise group but it is not working.
    Please advise

    Hi,
    This FM Converts OTF format to various formats (TLINE table). TLINE displays SAPscript: Text Lines
    Regards,
    Pavan

  • Subcontracting challan print preview problems

    Hello sir,
    i am having a problem  when i create subcontracting  challan from j1if01 for a vendor 'S'  item 'x'.
    material details for 'X' is shown for vendor 'S' in challan print preview.
    again when i crete second challan from j1if01 for the same vendor 'S' item 'y'
    material details for 'y' is not shown for the same vendor 'S' in challan print preview.
    i have maintained chapter id for both material.
    regards
    sanjay

    Hi Sanjay,
    Your problem is not clear. IS it that you have two materials in BOM and you are transferring these two materials to the vendor but only one item is printing and not the second one.
    Pls check your settings under logistics General> Tax on goods movement>India--> Subcontracting attributes in that EI items. What is the number selected there. If it is one it will print different challan per item.
    Regards
    Sangeeta

  • How to cancel subcontracting challan or 57F4?

    Dear All,
    My scenerrio is like we create subcontracting PO and Issue the all component with movement type 541 and reference of subcontract order. then create subcontract challan or 57F4 challan. then user want to cancel the challan or reverse the challan with material document reverse. Component are reverse with Movement type 542 but Challan is not reversed. I use T code Reverse/complete Tcode but message is displayed doucment is completed.
    Pls guide me how to cancel the challan before migo.

    hi,
    use transaction code J1IF13, enter the SC challan number.(generated by J1IF01)
    Edited by: sandip gusai on Aug 4, 2008 10:50 AM

  • Printing of subcontracting  challan

    Hello Experts
    Pl guide me how to print the subcontract challan after reconcillation.
    Thx
    Umesh

    Hi,
    Check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Subcontracting Attributes > Check whether Subcon Output Type - J1IF is maintained here.
    Also check in M706 - For Output Type - J1IF, under "Print" Tab Page, what is the Print param., if it is "7 Plant/storage location" then go to OMJ3 and mainatin the entry with J1IF/Plant/Storage location (keep it blank if all the sto locs of plant are to be considered)/Output Device/Name/Print Immediately/Release after output
    Also check condition record for Output Type J1IF in MN22. If not there then mainatin it.
    Note: - It is better to have Condition Table with "Plant" and a new access sequence needs to be created with this table and assign this to J1IF in M706. So condition record maintenance will be easier.

  • Subcontracting Challan printing after reconciliation (status assigned)

    Hi,
    My requirement is to reprint the subcontracting challan after reconciliation (status assigned).
    To reprint the challan we use the tcode j1if11 and tick print immediately. Spool is generated and we are taking printout.
    But since the challan is reconciled system is not allowing to enter in tcode j1if11.
    Please suggest how to get print in this case.
    Regards

    Hi,
    Thanks for the reply.
    But this is business requirement in case if the challan need to be resend to vendor if the original copy is lost or business reporting is reqd or any other case.
    Please suggest..................

Maybe you are looking for

  • IPod nano 5th Gen appears in Finder but not iTunes

    I am trying to restore my 5th Generation iPod Nano, but it will not show up in iTunes 12.0.1.26. It does however appear in Finder as a disk image allowing me to access certain directories, like Calendars, Contacts, DCIM, Notes, and Recordings. I've t

  • Ipod and Itunes not cooperating?

    I was updating my ipod but it keeps saying "preparing your ipod for restore", or "waiting for ipod". When it's "done" it says "ipod could not be restored." Please help!!!

  • Best use of 2 SSDs?

    Hi all, I impulse bought a new SSD.  As you do every day.  And now I'm just wondering of the best way to utilise it.  I've already got Arch on another SSD so it's not exactly slow already Apart from the obvious, moving swap and /home to this new driv

  • Benefits- Work Injury Compensation

    Hi, currently I am working on Insurance Plan for Work Injury Comppensation that is only applicable for those warehouse workers. Under the coverage variant I have defined Outpatient Primary Care as well as Inpatient Care. For the paramter group: I def

  • 7000 Photos Gone, PLEASE HELP!!

    I opened iPhoto 08 and instead of 8000 photos, i now have 1000!!! I have no recollection of moving anything into the trash, but i did empty it when i woke up this morning..UGH this is the worst. I WAS JUST about to buy a external, unfreakingreal. PLE