Printing Terms and Conditions on last page of invoice

Hi All,
I am generating receivables invoices in PDF format from Oracle EBS R12i using BIP 5.6.3.
I have a requirement to print T&Cs separately on the last page of each invoice so that:
1. Regular invoice header and footer information do print on T&Cs page
2. Page count on invoice should not T&C page. Example, if there are 3 pages in an invoice where first 2 are for transaction details and third for T&C then page count should display only as page 1 and 2 as "Page 1 of 2" and Page "2 of 2" (not as "Page 1 of 3", "Page 2 of 3" and "Page 3 of 3")
Also I seen following thread on this forum but unfortunately its inconclusive:
Printing Terms & Conditions page for Purchase Orders
I would appreciate if you someone can throw in bright ideas about how this can be achieved.
br

I also have similar issue printing POs. I have followed the steps of Tim - http://blogs.oracle.com/xmlpublisher/2007/10/here_are_my_terms_conditions.html but the T&C page is being counted in the page total.
Any idea to fix this issue? Thanks in advance.

Similar Messages

Add terms and conditions on last page of PO using XSL-FO stylesheet

Hi
I need to add terms and conditions on last page of PO pdf. I have changed the values for profile options PO;Terms and Conditions Filename and PO: In file path to the file name and filepath of my terms and conditions txt file. Do I have to make any changes to the stylesheet for it to be printed on the last page? if so, what are the changes to be made?
This is really urgent and I would appreciate any help.
Thanks,
Sharmila

Hi,
In main window &next-page& eq 0. condition does not work .
even &page& eq &formpages& may not work out not sure.So what you need to do is.
In the print program
just describe your internal table say lines v_lines
and in the loop put one count varaible say v_count
then in the script put condition as below.
if v_count eq v_lines.
/:NEW-PAGE pagename ( say last)
endif.
Reward points if useful.
Regards,
Nageswar

Printing terms and conditions for a report in last page

Hi all,
I am facing a problem in reports 6i, I have PO printing Report with layout to be printed in two pages first part will be printed with po details, and for every po number after printing all the details for that purchase order, in the last page i have to print terms and conditions can any one help me out
Regards
Vizith

Hello,
You should post also the report type (Tabular, Group..etc) you are trying to create also. Because without that like these type of requirement can not be suggested.
I can only make guess that you are creating report as Group Above and group frame is for PO. Then just put your terms and conditions frame after the detail frame inside the group frame. Then it will print after completing the details for each PO.
-Ammad

Need to Print "Terms and conditions" on every back side of the page

Hi All,
i have requirement like need to print "Terms and Conditions" text on every back side of page using adobe form.
i have tried options like created created 4 pages in master page and defined flow content page1->page3, page2->page4(terms and conditions). but when we execute less items of the billing number got the 3 pages i.e page1 having item data, remaining 2 pages displays the "terms and conditions" text.
if any worked on the same kind of requirement please let me know and it would be great helpful to me.
Thanks,
Ramana

Hi,
One of the option is that you can create 3 pages in the Smartforms, e.g. A, B and C.
A has print mode "D" (duplex) and next page "B"
B has print mode " " (unchanged) and next page "A"
C has print mode " " (unchanged) and next page " " (blank)
B and C do not have a MAIN window - they just contain the Terms & Conditions in a secondary window.
At the end of the MAIN window on page A, insert the command NEW PAGE <C>.
This will give you a print out that will be in a sequence
A,B,A,B,...A,B,A,C.
Regards,
PP

Print Terms and conditions on Back side in Smart Forms

Hi All,
How can we print Terms and conditions on back side of last page. we are using SAP Smart Forms to print Packing Slips now we need to print the terms and conditions on back side of last page. who can we do this ... ?
I have created 2 pages first page and Last page i have selected last page as next page for First page and vice vis and selected duplex printing for first page print option.
Now the problem is the terms and conditions are printed on all the pages but not on the last page. for example if i have 5 pages then all the 4 pages are printed on front and back but the last page(5) is printed only on the front side but not on the back and if we print only 1 page then only front page is printed and no back side is printed.
please let me know what else need to be done in order to print the terms and conditions on the back side of last page.
Thanks,
Praveen Chindam.

Hi,
There is quite a simple solution. We have exactly the same requirements for our invoices.
Create 3 pages in the Smartforms, e.g. FRONT, BACK and LAST.
FRONT has print mode "D" (duplex) and next page "BACK"
BACK has print mode " " (unchanged) and next page "FRONT"
LAST has print mode " " (unchanged) and next page " " (blank)
BACK and LAST are identical apart from that, and do not have a MAIN window - they just contain the T&C in a secondary window.
At the very end of the MAIN window on the page FRONT, insert the command NEW PAGE <LAST>.
This will give you a print out that is
FRONT, BACK, FRONT, BACK,....FRONT, BACK, FRONT, LAST.

Terms and Conditions in separate page in Smartform

Hi,
I m developing a Smartform for Purchase Order .
The problem here is in last page i need to display the Terms and condition.
How to do the same.
if anyone has done the same, please let me know
Thanks in advance,
Shiva

Hi,
Check this condition SFSY-PAGE = SFSY-FORMPAGES for the text.
If this condition is true then its a last page of Form.
Thanks

Printing Terms and Conditions for each Purchase order in the RDF output

Hi All,
Present i have an RDF report with the registered concurrent program. when i run this concurrent program i am getting the terms and conditions at the end of the purchase orders only once(for example 10 purchase orders). Now the requirement is to get this terms and conditions printed for each purchase order. The output is in PDF format. It's an 11i RDF report. Can any one suggest me the methods how to do this? Please give me reply as soon as possible.
Thankyou in advance
Regards,
Polimera

Hi, Polimera
Welcome to OTN
Present i have an RDF report with the registered concurrent program. when i run this concurrent program i am getting the terms and conditions at the end of the purchase orders only once(for example 10 purchase orders). Now the requirement is to get this terms and conditions printed for each purchase order. The output is in PDF format. It's an 11i RDF report. Can any one suggest me the methods how to do this? Please give me reply as soon as possible.
Take a fixed frame inside the purchase order master repeating frame and place your terms and condition inside the fixed frame.
Hope this helps
If someone response is helpful or correct, please mark is accordingly

ADOBE Form printing terms and conditions back side of first page only.

Hi ,
Please let me know how to print only on first page back side in the adobe. I have multiple pages data flow. But i have to print Conditions on the back side of first page only.
Thnaks in advance.
Hema.

Hello Hema,
Create a master page set. One for front page and other for back page.
Make your hierarchy as Front Page - Oddpages
Back page - Even Pages
in placement options use, for first page only.
Thanks,
Rakesh

How to print terms and cond of a PO in a fresh page in smartforms??

hi All,
My requirement is as follows...
i need to print terms and conditions of a purchase order after the main window and the amount has been printed. the terms and conditions should be in a fresh page. i.e if the line items items and the amounts window occupies two pages. then terms and conditions should be printed on a fresh page i.e 3. the terms and conditins are many so it will occupy a full page. how do i call this page after all line items are printed??
Any pointers reg this would be highly appreciated.
Regards,
Sreekanth.

Hi,
do the following steps:
1.Create a New Page for Terms & Conditions (lets say Page3).
2.First u describe the no of lines in your Internal table into a variable.
3.In the LOOP create a counter & increase the counter for every line. also create another variable to set the flag when the Counter reaches the no of lines in internal table.
4.Now, write a condition in Program lines if Counter = No of Lines in internal table, set the flag variable to 'X'.
5.Now create a condition on Page, IF FLAG = 'X', GO TO PAGE 3.
Eg:
DATA : gv_counter TYPE i,
           gv_lines TYPE i,
           gv_flag.
describe table itab lines gv_lines.
LOOP AT itab.
   clear : gv_flag.
   gv_counter = gv_counter + 1.
   IF gv_counter = gv_lines.
      gv_flag = 'X'.
      clear : gv_counter.
   ENDIF.
Now U create a COMMAND in LOOP, Go to New Page (Give Page3) and conditions tab (write gv_flag = 'X').
endloop.
Hope it solves!!
Rgds,
Pavan

How do you make it print first page first and not the last page first?

I have a HP Officejet Pro 8600. How do I make the first page print first and not the last page printing first?

Hi,
From the application used to print open the print dialog and click Oroperties or Preferences to access the Printing Preferences screen.
From the Layout tab set Page Order as Back to Front, then the first page will be printed first.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

'Share Name ID' Terms and Conditions Questions

Sorry for the double post - I had originally, by habit, posted this in the Droid Razr forum, but realize now it would be better here.
I would rather have my Verizon number display my name than the generic "Wireless Caller" and the instructions for how toConfigure Share Name ID tell you how to do that. But my question has to do with the Terms and Conditions on that page which read:
Note the Terms & Conditions: Your use of Name ID Services is subject to the following terms and conditions. By submitting a name for display and disclosure to others you are affirmatively asking Verizon Wireless to give your name and wireless phone number to a publicly available directory for use and distribution and you agree and consent to disclosure and use of this information by third parties.
Can anyone tell me exactly what that means? Specifically, I have three questions:
Does it mean you are now in a public "white pages" type directory?
Does it mean your phone number will be shared with telemarketers?
And lastly, if you have chosen to keep your Customer Proprietary Network Information (CPNI) private and opted out, will using Share Name ID override that selection?
In another forum there's a lot of discussion about this and I'd like to be able to add some informed information as opposed to wild speculation.
So if anyone - especially a Verizon employee - can shed some light on what those Terms & Conditions mean (or don't mean), I'd appreciate it.
Thanks.

I just got an answer to this from a very nice Verizon employee named Ryan. For anyone else who is interested, he said:
The Share Name ID service allows your name to show a specific or customized name when calling another person. The directory the terms and conditions are referring to are databases that landline companies use to provide Caller ID service. Landlines and cell phones process Caller ID in different ways. When you call a cell phone, whatever that phone has your number saved is how it shows on the display. Landline phones do not typically have a locally stored address book, so they rely upon these databases to give a name to display. The directory that is being referenced are these databases, used solely for Caller ID. They are not publicly accessible and searchable like a White Pages.
Opting in to Share Name ID will not override the CPNI opt out, they are two separate entities, and Verizon Wireless will not give your information to telemarketers. The only thing that will change with using Share Name ID is that your name(or whatever you choose) will show up whenever you call somebody instead of a generic "Wireless Caller" statement. Your privacy is still very much respected, and no alterations will be made.

I keep getting asked to agreed to the new terms and conditions and can not accept them please help, how to get rid of it?

I need help please I have my i phone, im setting the icloud and it keeps telling me to accept the new terms and conditions but the page wont populate for me to accept it, im getting annoying with it the pop up us making me crazy plase help.

Try these...
1) Press the Accept Button Twice...
2) Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Terms and conditions not getting displayed on the last page

Hi All,
I have to display a smartform, on the front side of the page i have to display material details and on the back side of the page i have to display terms and conditions. I' am unable to print the material details and terms and conditions in duplex mode, but on the last page only material details are getting displayed, terms and conditions are not getting displayed.
Can you please help me how to make the terms and conditions get printed on the back side of the last page.
Thanks,

I'm a bit confused by the statement "I' am unable to print the material details and terms and conditions in duplex mode".
I suppose you meant to say "I am able to print the material details and terms and conditions in duplex mode", correct?
If the problem is that on the last form page, the T&C is not getting printed on the back of the form, you could force the T&C page by using a flow logic command as the very last element of the main window, which gets processed when all the data is already output. For the command, use the 'Go to New Page' and specify the page name for the Terms & Conditions.
In case this causes an issue that the last page is printed twice (since the T&C page is likely defined with the next page being NEXT_PAGE), then copy the already existing T&C page, call it LASTPAGE and leave the Next Page attribute empty.

How to print the Terms and Condition page ine the sap-script

Hi experts,
                         i got the requirement that how to print the Terms and condition page in the script,i have the three pages, having the same main window, in the last of the main window(all three pages) i have called the hard coded text(i.e so10 text), but when i am displaying the output data get printed in the first page but i am getting the second page heading on the top of the terms and condiions page. In all the three pages i have the same main window, if i make change in any window i will affect all the other main windows. so please suggest me how i need to go.HOW TO GET GRID OF THE TEXT ON THE TOP OF THE SECOND PAGE OF THE TERMS AND CONDITONS.
like this i have called in the MAIN WINDOW
/E : LAST ( IN ALL THREE PAGES)
       INCLUDE ZSD_INVOICE_TERMS TEXT OBJECT TEXT LANGUAGE EN.
IN THE TCODE SO10
NEW PAGE TERMS.
1) TERM MS AND CONDITONS TEXT.................................................
FIRST->NEXT, NEXT->NEXT,,   TERMS--->TERMS.

Hi,
1. Create a new page by Name : LAST
2. Identify the text element which will be the last element in the form in the debug mode.
Mostly Ex: SUM, TOTAL, LAST etc.,
3. the page linking should be
First --> Next
Next --> Next
4. In the Text element identified in the step 3.
Write the following code
/: NEW PAGE LAST
/: INCLUDE the standard text created for the terms and conditions in SO10
Check the syntax for the command but the logic will be the same.
It should resolve your problem.

Print multiple pages of text module as Terms and Conditions at end of PO

Hello,
I have a text module that contains a two page terms and conditions to print as the last pages of a PO.
I have three pages
FIRST-->Calls NEXT
NEXT--> Calls NEXT with a command to LAST in the MAIN window
LAST-->Calls Last, has a MAIN Window and a regular window which calls text module
The text module only prints on the first page in the end of the PO(i.e.last page). It does not flow or create an additional page for the left over text in the text module.
Please advice.

Hi,
We have same situation. What I did was to introduce a new element in MAIN WINDOW ( by the way only FIRST & LAST pages are sufficient, no need to have additional page for printing Terms & Conditions ) in that element just have 2 lines viz.:
/: NEW-PAGE * Above command so that terms & conditions will always start from a new page.
/: INCLUDE ZPO_TERMS_AND_CONDITIONS OBJECT TEXT ID ST LANGUAGE EN
If terms & conditions are more than a page it will automatically be printed on the next page. ( In our case currently we have got 5 pages of terms & conditions ).
At the end of the program i.e. When you are finished with printing of a PO just 'WRITE' this element using WRITE_FORM.
I hope this helps,
Regards
Raju Chitale

Printing Terms and Conditions on last page of invoice

Similar Messages

Maybe you are looking for