Printing Terms & Conditions Page With an Invoice

Hi Everyone,
Our PDF invoices are maintained using SFP transaction & Adobe Livecycle Designer 7.0. We want to have one type of invoices in which a "Terms and Conditions" page is printed after the invoice if it meets a certain criteria (if it is a specific plant). I know there are master pages and body pages. I was looking at just having one master page with 2 body pages - 1 for the invoice details and 1 for the "Terms & Conditions" page. I want the "Terms & Conditions" page to print out only when it is a specific plant using WERKS but I'm not sure where I can put this logic in to make this work. I was thinking it would be imbedded somehow in the body page but I can't seem to make it work. Can someone offer any suggestions on this?
Thanks,
J.M. Sims
Ergon, Inc.

Hi,
Goto the T.Code "NACE".
Select "V3(Billing)".Click on "Output types".
Select your output type.
Click on "Processing routines".
Make a copy of the smart form displayed there.
Goto the T.Code "SMARTFORMS".Enter your smart form here.
In this for displaying any page you can maintain the condition.
Maintain you condition as if "WERKS=your value".
Ask your ABAPer to maintain that condition.
Save.
Regards,
Krishna.

Similar Messages

Print Terms & Conditions in the Back page in Sapscript

Hello Experts,
I need your help.
I have one sapscript. I want print Terms&Conditions in the back page.
My Sapscript is a copy of MEDRUCK.
I want: When NACHA = 1 --> Print Terms&Conditions on the reverse side of each page.
When NACHA = 5 --> Print Terms & Conditions in the last page (Not in the back).
I did one example of sapscript with only one page First. I created a second page Back.
The first point at Back and has the print mode 'D'.
The Back point at First and doesn't has any print mode.
My problem is:
1- Always, i have the last page without Back page. Always i have an odd number of pages. Normally i must have a peer number. Each page has the back page. But, is not the result.
I tried to call NEW-PAGE BACK at the end of the last page First like that:
If &NEXTPAGE = 0&
NEW-PAGE BACK
Endif.
But doesn't work. NEW-PAGE works only in the Window Main and &NEXTPAGE& = 0 works only in a window not main. So, i can't use them at the same time, in the same window.
Can any one help me please? I'm blocked and i can't resolve the problem?
And what i must do for NACHA = 5?
Thank you.
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Aug 15, 2008 4:59 PM

Hi,
This problem is caused by the printer which does not understand the sapscript page commands. Basically you need to embed printer specific commands for controlling output so that on particular conditions the output in printed double sided for the first 2 pages then each page single sided.
This is not easy, and can change depending on the printer being used. I would not recommend this type of action in SAPscript or SMARTforms.
Cheers
David Cooper

HT1222 In the process of downloading ios7 and can't get pass the terms & conditions page. I press agree and nothing happens. Help!

How do you get pass the Terms & Conditions page while downloading iOS7. Nothing happens when press AGREE

Reset iPad and continue with update
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

How to print chinese web page with netscape browserver in Solaris 9 OS ?

Dear All,
I would like to print chinese web page within netscape browser in Solaris 9 Traditional Chinese OS, the print out result is garbage code on the paper not correctly chinese fonts.
I can print out correctly the chinese document create by StarSuite 7.0 on Solaris 9 OS environment and also the chinese web page is correctly display within Netscape browser but for printing is abnomal result.
Can someone point me to how to do print chinese web page with browser in Solaris 9 environment ?
Best Regards,
-- Kuo

hi
i have encountered this problem before and i remember downloading some fonts package and installing it. u could google search your question and it should provide the solution.thats how i stumbled upon the package.
cheers,
bunny

PDF printing of web-pages WITH background?

How do I make it possible to have the background image/pattern/colour etc. of a web-page included when I "print" to PDF?
Whenever I print a web page with something in the background other than white it's missing in the PDF file. This happens in my daily-use browser (Seamonkey), but also in Safari. However, in iCab (http://www.icab.de/) the background is included in the PDF file, so at least it's possible in MacOS. I just can't find any settings for it.

Yes, this worked! Thanks!
Another neat trick I found is that you can save the different settings. Just go to the "presets" part of the print menu, then save the current setting. For example by naming it "PDF printing with background".
Then turn off the background colour/image/pattern and save it as a new preset (e.g. "Print (to paper)").
That way you don't need to waste lots of ink, but at the same time you'll get the complete web-page with background and all when you save it as a PDF file. Just remember to select the right preset before you "print".

How can I print the test page with the Arabic type from the command line

Hi,
I have been trying to make the tool for printing the test page from the command line on the Arabic OS. I used "rundll32 printui dll printuientry" with "/k /n" options. My tool is to print the test page in all OS when pushing the
button.
Normally, in the Arabic Windows, the test page is printed with RTL type when printing the test page in the "Devices and Printers". But in my tool, the test page is printed with LTR type. I'm confused because of this result.
Is it possilbe to print the test page with RTL type when using the "rundll32 printui dll printuientry"? If it is possible, could anyone give me the hint or information for resolving?
Please check for me.

Hello,
Thank you for your post.
Your issue is out of support range of Test Tools in Visual Studio 2010 and 2012 forum which discusses Visual Studio Test issues.
I am moving your question to the moderator forum ("Where is the forum for..?"). The owner of the forum will direct you to a right forum.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

While upgrading my iPhone5 OS to iOS 7 'Term & Condition' page for iCloud keep coming even after Agreeing multiple times.

Hi,
I am upgrading the OS of my iPhone5 to iOS7 directly from the device.
It downloaded and started upgrade. During the upgrade process I got stuck in 'Terms & Condition' for iCloud.
I clicked on 'Agree' buttom multiple times. Still itnstallation is not moving forward. It always remains in the same page.
Now I cannot come out the installation process. Even the 'Disagree' option is not taking me out from the 'Terms & Condition' page.
What may be the possible reason? Am I going wrong anywhare?
Regards,
Rajesh

There are various solutions to this posted in this discussion: https://discussions.apple.com/thread/5321627?start=0&tstart=0. Perhaps you'll find one that will work for you.

Term-Driven Page with Friendly URL doesn't work with a page in another Site Collection

Hi all,
It appears that the Term-Driven Page with Friendly URL does not work when it is referencing a page in another Site Collection. When I set my Managed Navigation to use a term that points to another Site Collection page, the link shows in my navigation, but
gives the error:
"Sorry, something went wrong"
This does not happen if I link to a page in the same site.
Kelly
Personal Blog: http://thebitsthatbyte.com

i got similiar (i am not sure whether the same) issue recently:
I have a site collection (address http://spserver/) which use managed navigation, and term-driven page with friendly url. The address of the term-driven page is set as /pages/teamsitehome.aspx . A friendly url takes the form such as http://spserver/menulevel1/submenu1
I create a new site collection http://spserver/sites/newsitecollection and i want it to have the same navigation menu as the other site collection. Since i cannot use the same termset for the two site collection, i have to create a new term set
for the new site collection, "pin term with chidrem" or "reuse term" to the old term set. The friendly url in newly created site collection and term set takes the form such as http://spserver/sites/newsitecollection/menulevel1/submenu1, and still
points to /pages/teamsitehome.aspx. Notice that the term-driven page here in the new site collection still points to the old site collection.
Actually, it works! I mean, when i click the navigation menu, friendly url http://spserver/sites/newsitecollection/menulevel1/submenu1 appears in the browser address. And SharePoint knows to load /pages/teamsitehome.aspx for this url. If this is a simple
blank page, it just open fine here.
However, my custom page teamsitehome.aspx calls TaxonomyNavigationContext.Current.NavigationTerm in its page load event, it should returns a valid NavigationTerm for the friendly url. But it returns null here. I traced the code to find that it calles
internal static NavigationTerm GetNavigationTermFromTargetUrlGuids(SPWeb contextWeb, Guid termStoreId, Guid termSetId, Guid termId, bool includeInheritedSettings, bool enableExclusions)
The passed in contextWeb points to http://spserver/ , since the term-driven page is in this web. But the termSetId points to the new termset. TermId won't be problem, since its the same in both new and old term set for pinned term. The combination of contextWeb
and termSetId just make the output NavigationTerm null. I think its simply because the termset is not associated with this spweb.
My workaround is create a copy of /pages/teamsitehome.aspx in new site collection. The term-driven page address is set to ~sitecollection/pages/teamsitehome.aspx in term management. This time, all works. Just because the contextWeb parameter i mentioned
above now points to the root web at new site collection, where the term driven page resides.

Print postcards from 'Pages' with a Lexmark C544dn printer?

I have been trying, unsuccessfully, to print postcards from 'Pages' with a Lexmark C544dn printer. As far as I can say, I have correctly set all parameters, but the output is always blank. Any ideas? FYI Lexmark have been unable to help!!

GeoffBob wrote:
Hi Jerry, and thanks for your response.
What I want to achieve is a landscape postcard with one line of text across the top. I use this to stick on a few sticky notes for training workshop participants to use, to record their special interests for the session. I have done this for years with a Windows PC, MS Word and an HP4500dn LaserJet, and assumed that it would be a simple process with the new set-up (iMac, OS-X 10.7.4, iWork Pages 4.1 and Lexmark C544dn).
I started a blank document, with the paper size set to 6 x 4 inches landscape format. I re-set the margins to suit the size of the postcard, so that the text appeared to be in the right position, on screen.
I used the MP tray to feed the paper (there is only this one input, apart from the regular paper tray), and have tried this at the left side, in the centre and at the right side, in both landscape and portrait format.
I have even tried putting a sheet of portrait A4 paper through, and the printing shows up two thirds towards the bottom of the sheet, across the narrow dimension of the sheet. This makes me think that the machine is 'printing' after the paper has passed through.
Any idea what I am missing? Thanks, Geoff
Your trial with a full size paper tells the story, I think. Your ink is missing the post card. Try again with a small card. After initiating the Print function, make sure you are seeing the expanded Print dialog with the preview on the left side of the dialog window. Does everything look OK there? Paper correct size and orientation? Text showing where it should in the preview?
Jerry

HT201365 I am trying to update my iphone 4s to ios7. It is stuck on the terms & conditions page and will not move on even if I agree or disagree. Any help?

I am trying to update my iphone 4s to ios7. It is stuck on the terms & conditions page and will not move on even if I agree or disagree. Any help?

this did not help me. Agree/disagree/turn off/turn on/ try again. Nothing gets it off the initial Icloud terms and privacy policy agree/disagree page. The phone is really of limited usefulness, being stuck on that page.

Terms & Condition Page

Hi All,
I am enhancing the MEDRUCK01 Sapscript. Now my requirement is to add a terms n condition page at the end of the PO . This terms page should be my last page as well.
I don't want to disturb the printer programs. Any idea how to go about with this?
Thanks.
Antony.

In ur Footer Window give condition as follows
/: IF &NEXTPAGE& EQ 0
P1 Terms and Conditions
/: ENDIF
So it checks for the condition for next page = 0, if that system symbol as value = 0 it prints, because for last page next page is always 0.
Regards
Bala Krishna
Edited by: Bala Krishna on Aug 27, 2008 3:24 PM

How to attach the TERMS & CONDITIONS page

Hi SAP Experts,
Could any body help me in SMART FORMS.
==========================================
Reqt:
I have 2 pages of TERMS & CONDITIONS . I need
attach in a smart form of billing invoice.
It should come at the end as an attachment.
can any body throw light on this. I need some
serious answers.
Thanks in advance.
Vas.

hello srinivas,
There are 2 ways of doing this.
1. Have a Window (Make sure that is the last one on your page, even after the main window) - put all your terms and conditions in it. If you see the conditions tab in the attributes of that window, you can set it as ONLY AFTER THE END OF MAIN WINDOW. Once this is set all the Terms and conditions will print at the end.
2. This is the way I prefer. Usually the Terms and cond. are same different kind of documents. So design a different SMART Form and call it where ever you want.
Regards,
Naveen

HP LaserJet 4200 Printer outputting blank page (with creases) before printing

HP LaserJet 4200 Printer
Keeps outputting a blank page, with creases in the paper (about the middle of page), before it prints the intended page.
This happens at random, but quite often. We have been using this printer for years without any issues. This has been happening for about the last few weeks.

Hi have the same problem with my HP LJ4200.
The problem is intermitent , blank page with with creases before the document
Have you found a solution ?
thanks !

Print out a page with a all controls

Hello
Is it possible to print out all the controls on a page.
I meam all together with one function?
Thanks
Phil1

I assume you're asking how do you print an MFC dialog with all of its controls. Is that correct? If so, try adding a method to your dialog class with this code:
CPrintDialog printDlg(FALSE);
if (printDlg.DoModal() != IDOK)
return;
DOCINFO documentInfo;
::ZeroMemory(&documentInfo, sizeof(documentInfo));
documentInfo.cbSize = sizeof(documentInfo);
documentInfo.lpszDocName = _T("Dialog Document");
HDC hdcPrinter = printDlg.GetPrinterDC();
CDC printerDC;
printerDC.Attach(hdcPrinter);
printerDC.StartDoc(&documentInfo);
printerDC.StartPage();
HDC hdcScreen = ::GetDC(NULL);
CDC screenDC;
screenDC.Attach(hdcScreen);
long screenPpiX = ::GetDeviceCaps(hdcScreen, LOGPIXELSX)
long screenPpiY = ::GetDeviceCaps(hdcScreen, LOGPIXELSY);
long printerPpiX = ::GetDeviceCaps(hdcPrinter, LOGPIXELSX);
long printerPpiY = ::GetDeviceCaps(hdcPrinter, LOGPIXELSY);
long xRatio = printerPpiX / screenPpiX;
long yRatio = printerPpiY / screenPpiY;
CRect windowRect;
GetWindowRect(&windowRect);
CRect targetRect = windowRect;
targetRect.right = targetRect.left + (targetRect.Width() * xRatio);
targetRect.bottom = targetRect.top + (targetRect.Height() * yRatio);
targetRect.OffsetRect(
-targetRect.left + (targetRect.left * xRatio),
-targetRect.top + (targetRect.top * yRatio)
CDC* dialogDC = GetDC();
printerDC.StretchBlt(
0,
0,
targetRect.Width(),
targetRect.Height(),
dialogDC,
0,
0,
windowRect.Width(),
windowRect.Height(),
SRCCOPY
ReleaseDC(dialogDC);
screenDC.Detach();
p
rinterDC.EndPage();
printerDC.EndDoc();
printerDC.Detach();
This isn't perfect, but hopefully it can get you started.
- Elton

I cannot print from web pages with mozilla, can print from internet explorer and all other programs. I have a Cannon Imageclass MF8100.

I cannot print from any web pages with Mozilla as my browser. The printer gives me a blank page. I can print from internet explorer and all other programs. I have a
Cannon Imageclass MF8100 printer. I spoke to Cannon as I thought it was a Cannon issue and it is not.

Try the '''''reset''''' described here: <br />
http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

Printing Terms & Conditions Page With an Invoice

Similar Messages

Maybe you are looking for