Printing - Terrible Margin Problem

I have read all of the posts regarding margin problems.
Ill tried creating the custom 'iCal' size in Safari but nothing works.
When printing in week view all 4 margins spill over the edge.
This occurs whether printing to paper or PDF.
Any fixes to this or is it a bug?
PowerBook Mac OS X (10.4.4)

Hi,
While playing with the values of ImageableArea I'm getting changes in printout
but can't really find the correct combination of values because I'm just guessing
what the values mean..ImageableArea provides the bounding box of the area in which the printer may print for the page size named mediaOption. There will be one statement for each named page size supported by the device. DefaultImageableArea provides the mediaOption name of the default imageable area. Since there can be only one default page size, this value should be the same as the value of DefaultPageSize, DefaultPageRegion, and DefaultPaperDimension.
The syntax for defining imageable area is as follows:
*ImageableArea mediaOption: "llx lly urx ury"
*DefaultImageableArea: mediaOption | Unknown
ll stands for lower left corner and ur for upper right corner. The bounding box value of ImageableArea is given as four real numbers, representing the x and y coordinates of the lower left and upper right corners of the region, respectively, in the PostScript language default user space coordinate system. The x and y axes of a given page size correspond to the x and y axes of that page size in the PaperDimension entry.
Printing on UNIX with Oracle Reports
http://download.oracle.com/docs/cd/B14099_11/bi.1012/b14048/pbr_uxprt.htm
Regards,
Hussein

Similar Messages

CS3 print booklet margins problem

Thanks to the help of this forum, I can now print my 12-page newsletter as a booklet with 3 sheets of tabloid paper. BUT ... one new problem is that the leading edge of each printed sheet has a small margin, making the center become off-center, and the far edge of the sheet has a large margin.
Any ideas out there of what I'm doing incorrectly?
Thanks.

This could be caused by asking for printers marks if the page position in the setup dialog is set to upper left, or even without marks if the sheet is larger than required to hold both pages and the position is upper left. The cure for that is to click the Print Settings button in the Print Booklet dialog and change the positioning to "centered."
Also, many inkjet printers have asymetric margins which can potentially throw off even centered content or cut off part of the trailing edge of the page.
Peter

SAPScript print out Margin problem

Hi Gurus,
I have configured a printer already existing to one of my storage location. When I am taking print out of material document, it is not coming correctly. Text is getting wrapped up on right hand side. But the preview of same material document is showing perfectly in spool result.
I have checked the printer setting, print out is coming correctly for windows.
I am using HPLaserJet Printer. I have maintained in SPAD- > Output attibutes- > Additional SAPscript & Smart Form Information:- Horizontal Move: 3mm , Vertical Shift: 2 mm. There is no page format maintained in tray info.
but in Spool request, under "Print with changed parameters", the format under spool request is " DINA4".
Please guide, if i need to maintain some more settings for the margins.
Thanks & Regards,
Sandeep

Hi,
For Material document Print out settings refer the below steps..in link
Re: Printing all items (collective) from material document
there are lot of threads regrading same answered in the forum have a look for the same
Once all the settings are done check in MB90 you are selecting the line item and shoting the print.

Adobe print form margin problem

Hello,
I am trying to print a Adobe print form on Kyocera printer(Using HPLJ4 device type).
I want to print content from 0.5 CMs, but if i give no margin in the design,Output is being Cropped.Print preview is okay.
Can any one help me?
Thanks,
Guru Prasad

Hello,
I think you can try with different device type like POSTSCPT or SAPWIN,
During the print it use different character widths when you use different device types to
output the same form, HPLJ4 is PCL-5 and the largest.
You can refer to notes 90437 and 183948 for more information.
Best Regards,
Wen Peng

HP 2600n's margin problem with driver 2.3

After installing the new driver v2.3, my printer started to have a margin problem. Even if I setup any margin correctly (on any software...) the page printed has borders cut off and it is shifted on the left (or, left margin is less than the right). Obviously, this problem was found with files that previously were printed correctly.
Only by reducing by more than one cm margins, the print is not cut, but the page continues to be shifted to the left.
Any help?
Thanks.

Try downloading and re-installing the Snow Leopard drivers and seeing if that fixes anything.

Print Color Management Problem ?

I have a print color management problem I cannot solve. It reminds me of the print color management problem I had over a year ago when the compatibility conflict between LR and MAC Leopard produced horrible prints. I have Snow Leopard now and been out of the country for some months and yesterday when I tried to make some prints the same problem reemerged. So I downloaded current drivers (and ICCsfor Premium Luster) from Epson and LR 2.6 and spent a good part of the day with Martin Evening's book. I followed (I think) his instructions to make the basic print step by step but the prints still were terrible. My problem is with the color management pop up in the print settings dialog -- it says "color matching" not color management and I cannot check either "no color management " if I want LR to control the process (Kelby) or check "color sync" if I want my Epson R800 take over. I have no idea where the "color management" pop up went. I'm clueless as usual and probably omitting a step because of frustration or brain numbness. Any help would be appreciated. WJS

The settings in Lightroom are simple. and contain in the Print Job panel in the Print module. You either select manage in printer (and then select the profile in the printer drivers) or select the profile here and then turn of all colour management in the printer drivers. The second option will usually produce the best results. What you don't want is to have the profile selected in both LR and the printer drivers, so if the driver doesn't have an option to turn of colour management then you may be forced down the first route. However it would be an unusual decision for a printer manufacturer to make drivers that can't turn off colour management, so you may wish to ask how to do it to your printer manufacturer or check the printers handbook.

Smartforms - Margin Problem

Hi,
I have a big problem wich I try to solve, an smartforms was created and my requeriment is fixed this is almost finish but there is only one thing that I need so solve: There is a Main window with a table wich contains Header, Main Area and Footer, my problem is on Main area where there are one row and three cells (Code, Desccription and Value) that left margin is 0,00 cm for Code but when smartforms is printed, the margin printed on the voucher is not correct.
Please I need a big help!!!
Thanks in advance, points regards
Tokio

Hi, thanks to all
I checked all thing you posted but my problem still there, this is an example of the data showed on smartforms
Normal Value must be:
Code Description Value
10003 Testing data 35.000,00
Real values printed (Smartforms):
Code Description Value
<------10003 Testing data 35.000,00
This space is my problem (<---)
Main window has :
 Left Margin 0,03 CM Width 12,80 CM
 Upper margin 12,20 CM Height 0,83 CM
Table (Output options)
 Style SMF_STYLE
Thanks
Tokio

PDF printer has a problem with Safari in "Reader" mode in Windows7

As shown in the image above. When I try to use the PDF printer to print out a web page in Safari "Reader" mode, the lines near the bottom of each page get squeezed like this. There is no problem with XPS printer. I guess this problem is because of some incorrect settings in Safari or the PDF printer?
My system is Windows 7 Pro. I am using Acrobat X Pro. The page I am trying to print is http://en.wikipedia.org/wiki/Electronic_band_structure. This problem only happens when the webpage is adjusted into "Reader" mode in Safari.

Many thanks for your reply!
I am sorry, I did not make my question clear. I would like to save some web pages only in "Reader" mode, because in this mode all the advertisements are filtered out and the pages look much nicer than the origional layout.
I first let Safari to active "Reader" by clicking "Reader" button.
Then I click "Print" button and select Adobe PDF as the printer.
The problem is the PDF file has something wrong (shown above), and I would like to know how to avoid this problem.

Downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with the

downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?

Let me give you a slightly different perspective than everyone else here. You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network. That's bad. Very bad, for you, unless you absolutely trust everyone who lives within range of this network. So stop doing it.
As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information. There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot. Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it.

I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and d

I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and downloaded Adobe Reader X instead and that still doesn't work. I have Windows 7.

Hello,
Please follow the link to troubleshoot the printing issues with Adobe Reader:- Troubleshoot PDF printing | Acrobat, Reader.
Regards,
Nakul

Seeburger EDI Adapter with terrible performance problems

Hi,
we installed seeburger edi adapter on PI 7.1 and we have terrible performance problems:
We have a mail sender adapter polling a mail account.
Till the message is visible inside integration engine it takes sometimes 1-2 minutes or longer.
We already tuned the j2ee-engine and checked the DB-indexes (there are some OSS Notes) - no success.
We think that the problem is inside the DB-tables of Seeburger an that some indexes are missing (Oracle DB).
Any ideas?
Thanx
regards
Wolfgang Hummel

Hi,
I think in PI 7.1 SAP installed their own Java-VM (compatible with Sun 1.5) - is it true?
Do you have the same performance problems inside the adapter?
The adapter is like a black hole and it take sometimes one hour till you can see a message inside the integration engine (sxmb_moni).
Regards
Wolfgang

When I tried to print I had problems.

I got a new Macbook pro yesterday. Brilliant!
I used Time machine to transfer everything. I'm getting used to most things but
when I try to print I had problems.
I downloaded new driver but still no go.
Help please!!!
Kathy

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite

I used to print my photos in my hp psc 2210 printer without any problem. Now it gets stuck towards

I used to print photos in my HP psc 2210 printer without any problem including the 8X11 enlarged photos, but now it gets caught at the end of the printing resulting in shortened images. Does it have to do with the thickness of the photo paper? It was able to do it before. Are there any adjustments to be made?
HMC

Hi,
It looks like you've tried some of the troubleshooting steps listed in this document, but there are a few more to try first. Click on the + besides the XP section and follow the steps in order. See if this helps, if it doesn't I'll look for some more.
Printer Prints Blank Sheets
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

I updated the epson printer drivers like it asked, only to find out that my epson 1400 is not compatible on 10.8, the original driver worked fine, but now it prints terrible, how do I re-install back to original?

I updated the epson printer drivers like it asked, only to find out that my epson 1400 is not compatible on 10.8, the original driver worked fine, but now it prints terrible, how do I re-install back to original?

Do you have a TM backup or a clone? If so, erase the drive and restore with TM or clone back.
If not you'll have to reformat and re-install the OS that shipped with your Mac. If it shipped with Lion or ML you can do the restore from your Recovery Volume
EDIT: I assume you are saying that you just installed 10.8?

Margins problem when printing to PDF (Pages '09 v4.0.3 build 766)

Hi,
I don't know if this is connected to the latest Mac OS X v10.6.4 update, but some of my machines exhibit a very curious behaviour.
+ multiple pages A4 document
+ choose File > Print, click on "Save as PDF", under the PDF button
++ set pages 6 & 7 to print
++ set 2 pages per spread, so as to have Pages shrink the A4 document to somewhat A5, and have the two pages side-by-side on the same sheet
++ save the PDF
Then, when I open the PDF with Preview, the margins are all wrong (i.e. too big, there's too much white running around).
And from Preview's inspector, I can tell that the Page Size is set to US Letter, although in Pages both the document size AND the Printing Format are set to A4.
The most curious part of the story is that my MacPro, my work MacBook Pro 13 and a white MacBook exhibit the problem, whereas my personal iMac 27" DOES NOT.
And they are all running Mac OS X v10.6.4, with ALL the most recent updates, and the exact same version of Pages!!!
I suspect that something has been changed in a framework somewhere, but I cannot figure out what it is...
Any idea is welcome!
Thanks,
K2r

I can do the same in TextEdit (although it's even more painful to control the margins!!).
My problem is not that Pages won't put pages on one sheet; It's that the generated PDF does not respect the sheet physical size (A4 vs. US Letter), thus adding wider margins all around the document.

Printing - Terrible Margin Problem

Similar Messages

Maybe you are looking for