Printing text below the photo.
From Help the Artist
When I drag the T icon for text from the left side over to just below the photo of my painting so that I can put the titile etc under it all I get is a staight line. How do I get it to print text?
Help the artist,
I am not near my computer just now. You have identified additional requirements. Your painting is square, but the paper is rectangular. Something has to give!
Go to File menu>new>blank file. Enter height 11 in, width 81/2 in, resolution the same value as that of the picture in px per inch, background black.
Open the picture file, go to Select>all, then Edit>copy. This puts it on the clipboard.
Go back to the blank file, then Edit>paste
The painting will be on a separate layer. Position it with the move tool and resize it with the corner handles of the bounding box, if necessary.
Type your text below the picture. This will be on a separate layer as well. Position the text to suit.
I have printed many pictures over the years at a resolution less than 300 px/in. I like to be within
240-300 range. You can ascertain the resolution of the painting file via Image>resize>image size.
Sent from my iPad
Similar Messages
-
How to Print Text in the PLD when we select Type : Text
Hi All
I designed a PLD for Purchase Order which is working well but
whenever we select type: Text and we enter some text in the row level for each item. when we see the PLD priview
Items are displaying but the text below the items are not displaying
it displays an empty row after each item
How should i print text in the PLD
I required in this following Format
ITEMCODE DESCRIPTION QTY
001 XYZ 20
this is capital Good Item
002 PQR 30
this is Raw Material
In this above format
I didnt get the text below the Items
Can any one suggest the correct answerThanks for your reply
I already select the linetext field from table POR10 and kept it in the PLD
but i didnt get my required format
after giving that line text field iam getting
in this way
S.No. ITEMCODE DESCRIPTION QTY
1 001 XYZ 20
this is Capital Goods
2
this is Capital Goods
the text is repeating twice
I Put the ItemDescription field in POR1 and Line Text Field in POR10 in the same repetitve area -
how can I send multiple pictures to the Kodak link (under file & then order prints)? if the photos are not sequential can it be done?
Does the order matter here?Because the photos will be sent for printing. If there is any other reason, can you please cite example.
-
How do I write a text below the Lower Third line, in Adobe Premiere Elements 12?
How do I write a text below the Lower Third line, in Adobe Premiere Elements 12?
Ruth Schreiber
To what Premiere Elements 12 title template (lower 3rd type) are you referring?
It is not clear what you want to do.
a. Are you able to double click the template to open it in the program's Titler?
b. Can you select the present text with the Selection Tool to move it to custom locations?
c. Can you edit the existing text in the template?
The following uses the Aquarium lower 3rd template...where do you want to write text in the template?
We will be looking forward to your follow up.
Thanks.
ATR -
How do I get the names back below the photos in Bridge?
I have lost all names below the photos in Bridge. This is true for all years and moving back to the files all those names have also been removed and replaced with a date in black over the file folders. The information seems to still exist as the name and photo information comes when the photo is right clicked on and file info requested. Is there a way to get the information back to the original form below the photo files?
Because this forum is for beginners learning the basics of Photoshop, I'm moving this post to the Bridge General Discussion forum where your question will receive more specialized attention.
-
My Photosmart C309g printer ALWAYS uses the photo black cartridge
I have a photosmart Premium C309g, wireless network connected to an iMac running OS 10.7.2. I use the printer only occasionally to print photos - I have a smaller HP printer for photos. However the C309g always uses the Photo Black cartridge for print jobs. The printer will not operate without a cartridge fitted. But Photo Black is more expensive! How do I make the printer use the ordinary black cartridge for text jobs?
Hello,
Thanks for the post, great question. I've attached a link below that may assist with this, it refers to MAC OS X 10.5/10.6 but the idea remains the same. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01662356&tmp_task=useCategory&cc=us&dlc=en&lang...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.* -
Printing Text below Blob Images to PDF
Hi......I have designed a report to print to PDF. The report will be populated dynamically with blob images anything between 1 to 6 images displayed 2 per row with a text description appearing below each image.
However in certain cases where the other information above the images are long, the images printing overflows into 2 pages. In those circumstances, sometimes i get the text description appearing at the side of the image instead of below it.
Please look at this PDF link showing the above case: Link: [Sample PDF|http://203.211.146.160/website/Sample.pdf]
Any help would be greatly appreciatedDoes it work if you are not formating with multiple columns? Sometimes formating with multiple columns can be tricky.
I just looked at your sample again and it is pushing the text to the next column before starting a new page. Try splitting the detail line with the text in detail B, and make sure DETAIL still says keep together.
You may just be stuck with it,
Edited by: DebiHerbert on Jan 19, 2011 8:04 AM -
When printing photos in iPhoto 9.5.1 with my HP inkjet printer the multitude of colors in the photos are reduced to two, Magenta and Yellow. If the photos are exported to my desktop (MacPro) and printed from Preview, the colors in the prints are fine. How do I get iPhoto to print the colors correctly?
Brad
What settings did you use in the Export Dialogue?
When you go File -> Export you get a tabbed box with various options. In the File Export tab you can choose to scale the pics, or keep them the same size, change or retain the format.
Regards
TD -
How can I get my Photosmart B8550 to print envelopes from the photo tray?
I have a Photosmart B8550 printer. I print a LOT of envelopes for greeting cards through Stamps.com. I would like to be able to load invitation envelopes in the photo tray so I don't have to keep switching between paper and envelopes. I tried it and the only thing it will print is photo paper (or 4x6 card stock)
Hi,
Connect your printer to the network router.
1. Wireless>Wireless Settings>Wireless Setup Wizard.
2. Enter the router password to connect your printer.
or
1. Run the HP software and select the network/wireless connection method.
After printer is successfully connected to the network, enable Web Services/ePrint.
1. Press the ePrint button on the printer or the Web Services icon on the printer front panel.
2. Press Yes to accept terms of web services.
3. Press Yes to accept future updates.
4. A page will printout showing you how to register your printer's new email address which you will use to send your ePrints to.
Please click the blue Kudos star in the post that helped you. -
Why is the print lighter and the photos a little blurry when using Firefox?
It started on yesterday, Jan 4, 2012. With Firefox, the print is lighter and harder to read, and the photos, in general, seem unfocused/a little blurry unless you look real close. i didn't have that problem before switching over fro Safari.
Yes, just Safari. In Chrome, Firefox and all other applications it works as expected.
-
How to align text below the menu with text in the menu?
I'm trying to design a law firm site with a menu with text below it that is centered with the text in the menu. So, under "ABOUT" in the menu, there is "Meet our Attorneys". I can't get the 2 text boxes to center. When it looks centered, it moves when its FTP uploaded. Here's the site:
http://mckenzielaird.comHi
I checked the site and can see that under About , Meet our attorneys both are aligned centrally.
Can you please confirm me if I am missing anything here ?
Thanks,
Sanjit -
My printer does a great jopb of printing on photo paper. I find with the new version of iPhoto I don't get that choice. I don't see a place to get that option. Help! Thanks
Yes, bring up the photo you want to print and on the menubar, iPhoto > File > Print...
You should see all the selection criteria
Edit: hummm I see your problem now, pulling down the Presets only offers the main tray.... -
When I place an Aperture photo on the cloud to share with friends, the idenfifcation information I have entered for the photo does not transfer to the cloud and thus my friends get only the photo. Is there a setting I am missing that would allow the text to go along with the photograph?
The photo stream will transfer the EXIF information set by the camera and the filname/version name. Try to get any information you want to transfer into the filename by batch changing the filename with "write to master" enabled. Aloso, you can set a comment, when sharing the image to the Photo Stream.
-
When printing from Iphoto the photo is cropped at the top
When printing from Iphoto, the image is not the same size as in Iphoto. The top of the photo is always lost.
If I copy the image to preview and thence to Word the photo prints in full..... Why?Because you are printing a different size than the image - you give no details so one can only provide generalities
If you have an image that is 4:3 in dimensions and print it as an 8x10 image something has to give - it is the top or side of the image
Crop to the dimensions of the print - and you will lose nothing
LN -
My printer will not print text but the paper will go through real fast
my printer hp deskjet845c will not print text document but will go through the printer with no text on it
Hey there @d888-777!
Thank you for posting on the HP Forums!
I should be able to provide some suggestions that may resolve the issue regarding text document not printing. Do you get this issue when printing all text document or from specific programs?
I suggest running a cartridge cleaning from the HP Toolbox. If the clean cartridge document prints with text, then you may be looking at a slight software issue. To run a print cartridge cleaning I suggest following this link regarding Cleaning the Inkjet print cartridges. In the document scroll down to cleaning the Inkjet print cartridges and follow the steps.
The printer does not have full feature software for Windows 7 operating system. The printer will need to use the basic in-OS print driver. I suggest removing the printer from the devices and printer menu and re-adding the printer.
To remove the printer from devices and printers:
Press the Start button.
Press devices and printers on the right column.
Select the printer and click remove device.
Unplug the USB cable.
Restart the computer.
To add the printer back:
Wait for the computer to restart.
plug in the USB cable.
Windows 7 should locate the basic print drivers and install the printer.
You may not have all the functions available for the printer with the basic drivers.
Pease post back and let me know how everything goes!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Maybe you are looking for
-
How can i convert my apps from one apple id to a different one
i originally had two id's. I forgot my first one and made up a second one. when i updated my phone i cloud went to one and my other one stayed. problem is i no longer have access to my old email to verify it and now i cannot update any of my apps.
-
HT4505 Is it possible to save default scan parameters for Preview?
When I open Preview, the default scan parameters are stupid: text/custom size/jpeg. I want Preview to remember my usual settings and just open with those. Is that possible? Preview 7.0 OSX 10.9.1 MacBook Pro 2.4 GHz Intel Core 2 Duo 4 GB Memory
-
Lost Nomad MuVo2 4.0 GB Installation
Anybody knows if there's an installation file available so I can install my player? -Thanks in advance!
-
Hi Experts, I have made a custom script by copying standard SAPscript F110_FR_CHEQUE. Configuraion is done by functional and i have checked in FZBP transaction also that my Z script is configured for program RFFOUS_C. But when i am printing using F11
-
Updated to iOS7 on my iPad mini and now anything i type there is a 30 second lag on the letter appearing? Bug already? or does it need a full reset?