Printing the crystal report from a wbe form

Dear All,
I am very new to crystal reports.
In a web form I am having 3 report and by clicking on different options one will be visible at a time.
Now when the user clicks on the "Print" option it has to print all the reports.
For this I have used "PrintToPrinter" function but it is asking for the end page but I don't know how to get the last page number.

Dear Adam,
Thank you a lot.
But how can we resolve the issue "Printing to client printer".
If it is an intranet application then it will print to a network printer?
I am expecting your valuable reply.
Best Regards,
M. J. Jaya Chitra

Similar Messages

How to stop printing the crystal report with an alert message

I am having a field called "APPROVAL" in my stored procedure with which I prepared the CR. I want that if the value in the filed is 'A' then only the crystal report should print else it should prompt with an alert message.

Hi Sreejith,
Check this helps you:
Create an alert from "Report -> Alerts -> Create or Modify Alerts" with below steps:
1. Provide name of the alert (say Alert1)
2. Click on X+2 in front of "Message" field and write the Alert message you want to display.
3. Click on Condition button and write the condition If not({APPROVAL}='A') then true;
The above Alert will prompt with configured alert message when {APPROVAL} field is not having value of 'A'
Now, in a formula, write below content and display it where you want to display the APPROVAL field value:
If {APPROVAL} = 'A' then
{APPROVAL}
This formula content will be blank if the value of {APPROVAL} is not 'A'
Thanks,
Raghavendra

How to delete all the crystal reports from SAP B1 ?

Dear Experts,
I have one problem and I need to Delete all the Crystal PLD's and Crystal Reports from SAP B1.
I can delete a PLD or Report using delete option from Report and layout manager or layout designer.
But I need to select delete option for each PLD and It makes very time.I have some 200 Reports and I need to delete fully.
Is there any possible to multi delete option in SAP B1?
I have searched many but i will not receive proper solution. Any one can explain how to do This?
Thanks ,
Karthikeyan.P
MSBI Developer-Chennai

Dear Karthikeyan,
Manual deletion is actually the most safe way to delete them. If you try update B1 tables directly, you are against SAP support rule.
Thanks,
Gordon

Cannot display the Crystal Report from BW..very Urgent

Hello Friends,
We are executing the Crystal report XI report from BW 3.50 but cannot displaying andgiving the error messgae as follows....
<b>Service cannot be Reached</b>
<b>What has happened?
URL http://sapprodbw.company.com:8112/sap/bw/sap/bw/ce_url call was terminated because the corresponding service is not available.
Note
The termination occurred in system I12 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:sapprodbw_I12_12-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team</b>
I'm getting the above error could plz help me .. its very urgent task for us..
Thanks in advance for your valuable time...
Sreedhar G.

Hi Dinesh,
I started all the services and i checked the Test service of ICF its giving the same above error and service cannot be rezched...BASIS is also workin on the same issue but getting ...
Any help...
Message was edited by: sreedhar Gunda

Not able to print the ALV Report from NWBC

Hi,
I have created one report in ECC and that is attached to NWBC portal via. Tcode.
When I am taking printout of report using SAP GUI then its printing but while printing it from NWBC its giving Error.
Please find the attached screen shot.
Please suggest.
Thanks in Advance.

Hi,
Check out the following code
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   IT_FIELDCAT                       = v_fdcat "v_fdcat type SLIS_T_FIELDCAT_ALV,
TABLES
    T_OUTTAB                          = itab
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
You have to pass the it_fieldcat and the output is obtained as a table.
Hope this helps.
Regards,
Deepthi.
Edited by: Deepthi S on Jan 28, 2009 2:02 PM

Calling Crystal Reports from Oracle Forms 10G

Hi everyone,
I am trying to call a crystal report from Oracle Forms 10G.
I have a button on my Form which when clicked calls a Crystal Report which the uaser then wants to save as a PDf file.
Can someone please send me the code to do this and also the exact steps that are to be followed.
Thanks
Fm.

Hi Andreas,
I am trying to call the crystal report from an Oracle Form using a URL. No batch file is being used here.
I am looking for a peice of code similar to run_product or run_report built in in Oracle which calls an Oracle report from an Oracle Form.
Also I dont want to display the report on a screen or a window in Oracle Forms. I would like it to run just as we run an Oracle Report from an Oracle Form.
Is that possible ? If yes please let me know the steps to do this.
Thanks
Faiz
Edited by: IQ on May 13, 2011 11:38 AM

Show the print dialog when running a report from an Oracle form.

I would like to be able to print an Oracle report from an Oracle form but
in addition show the print dialog. My PL/SQL code is shown at the bottom of this post.
I have set the 'printjob' system parameter to 'YES' in the
report and I can bring up a print dialog using the reports runtime.
However, as soon as I run it from my form I lose this capability. Setting
'printjob' to 'YES' in the code has no apparent effect.
Many thanks,
Ben
-- Launch a report
DECLARE
v_pl_Id   paramlist; -- parameter list
BEGIN
-- add the parameters to the list.
v_pl_id := CREATE_PARAMETER_LIST ('summary');
ADD_PARAMETER (v_pl_id, 'destype', text_parameter, 'PRINTER');
ADD_PARAMETER (v_pl_id, 'printjob', text_parameter, 'YES');
-- run the report
RUN_PRODUCT (
    reports
, 'C:\Test Reports\Test.rep'
, synchronous
, runtime
, filesystem
, v_pl_id
, NULL
END;

At 10g not 9i using a bean area on my canvas implementing the following class ...
import java.awt.Frame;
import java.awt.JobAttributes;
import java.awt.PrintJob;
import java.awt.Toolkit;
import javax.swing.JPanel;
import java.io.*;
import oracle.forms.ui.VBean;
public class Select_Printer extends VBean {
public Select_Printer()
     super();
public String getPrinterName()
String PrinterName=null;
          JobAttributes jobAttributes;
          try{
               jobAttributes = new JobAttributes();
               jobAttributes.setDialog(JobAttributes.DialogType.NATIVE);
               Frame dummyFrame = new Frame();
               PrintJob pJobDialog = Toolkit.getDefaultToolkit().getPrintJob(
               dummyFrame, "Printtest", jobAttributes, null);
               PrinterName = jobAttributes.getPrinter();
          } catch (Exception e) {
               System.out.println("Printer error!");
          return PrinterName;
public static void main(String[] args)
Select_Printer select_Printer = new Select_Printer();
System.out.println(select_Printer.getPrinterName() );
}

Problem opening Crystal Report from SAP GUI through VPN

Hi Everyone,
I am facing an issue with opening the crystal report from SAP BW Role menu(SAP GUI). The issue is only with the BW Users who are connecting to the Client systems through VPN. All the settings are done perfectly in the Transaction /CRYSTAL/RPTADMIN and SICF for the CE_URL.
For those who are in the client network it works fine. Please see the URLs generated in both the cases,below.
From Client N/W
[http://sapbobj:8080/SAP/jsp/Action_Dispatch/dispatch.jsp?sap_client=100&cmsname=sapbobj:6400&language=EN&sap_sysid=D40&bw_id=4HUFYJ3XBZ7QLP5HIDYPR7PR6&sap-client=100&actionName=SAP_CrystalReport_View&appKind=InfoView&service=%2FInfoViewApp%2Fcommon%2FappService.do&loc=&initialFolderId=null]
Through VPN
[http://sapbwd.abc.com:8100/sap/bw/ce_url?(ce_protcl):(DS)(ce_server)/(ce_path_pr)/viewreport.csp(Q)bw_id=4HUPI3I78CG4S4EDH7XSDP736&sap_sysid=(sysid)&sap_client=100&language=EN&sap-client=100]
where "sapbobj" is the BOBJ system and "sapbwd" is the SAP BW Dev box.
For me it seems to be something related to the N/W. Please provide me your valuable inputs to solve this issue.
Thanks in Advance,
Koka M
Edited by: Madan Koka on May 19, 2010 5:18 PM

Hi,
I'm also facing the same issue. when try to open my report the URL doesn;t taking "bw_id".
It is blank for all transported reports.
Any advice..
Thanks,
Jothi

Crystal reports from XML data source in 'CR in Eclipse(CR4E)'.

I'm trying to generate the crystal reports from XML file using 'eclipse in crystal reports' through programatically. It had thrown this error.
log4j:WARN No appenders could be found for logger (com.businessobjects.reports.sdk.JRCCommunicationAdapter).
log4j:WARN Please initialize the log4j system properly.
Exception in thread "main" com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Error loading database connector. The class 'com.crystaldecisions.reports.queryengine.driverImpl.DriverLoader' could not be accessed.---- Error code:-2147467259 Error code name:failed
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(Unknown Source)
     at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
     at com.businessobjects.sdk.erom.jrc.a.a(Unknown Source)
     at com.businessobjects.sdk.erom.jrc.a.execute(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ds.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.an.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.b0.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.b0.b(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.bb.int(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.UndoUnitBase.performDo(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.UndoUnitBase.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.byte(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.addTable(Unknown Source)
     at com.businessobjects.samples.CreateXMLInlineSchemaReport.main(CreateXMLInlineSchemaReport.java:50)
Caused by: com.crystaldecisions.reports.common.QueryEngineException: Error loading database connector. The class 'com.crystaldecisions.reports.queryengine.driverImpl.DriverLoader' could not be accessed.
     at com.crystaldecisions.reports.queryengine.Connection.ur(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Connection.uB(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Connection.br(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Connection.bs(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Connection.t1(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Table.u7(Unknown Source)
     at com.crystaldecisions.reports.dataengine.datafoundation.AddDatabaseTableCommand.new(Unknown Source)
     at com.crystaldecisions.reports.common.CommandManager.a(Unknown Source)
     at com.crystaldecisions.reports.common.Document.a(Unknown Source)
     at com.businessobjects.reports.sdk.requesthandler.f.a(Unknown Source)
     at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.byte(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(Unknown Source)
     ... 24 more
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     ... 36 more
Caused by: com.businessobjects.reports.jdbinterface.common.DBException: Failed to load the database connector 'crdb_xml.dll'.
     at com.crystaldecisions.reports.queryengine.driverImpl.DriverLoader.loadDriver(Unknown Source)
     ... 40 more
Edited by: Kondal Kolipaka on May 29, 2009 6:25 AM

Hi,
1) Open the Crystal report with XML datasource connectivity in the Crystal Report designer.
2) Click on File ->Report Options.
3) Uncheck the Verify On First Refresh box.
4) Save the Crystal report.
5) Open this Crystal report in Crystal Report for Eclipse designer and try Executing it again.
Please let me know the results.
Thanks,
Neeraj

How to open the crystal reports 2008 in CRYSTAL REPORTS ENTERPRISE 4.0

Hi All,
Can you please let me know how can migrated the crystal reports from BO XI 3.1 to SAP BO 4.1 and after migrate how to open the crystal reports 2008 in CRYSTAL REPORTS ENTERPRISE 4.0.
can you please help on this and if document please share.
Thanks,
Rajesh

Use the upgrade management tool to move from 3.1 reports to BO 4.1. After migration, open the report in crystal enterprise 4.0, you will get a message saying that the report will be converted to latest version, will not be able to view from older version after converting. (Similar words- not sure exact words).

Problem in printing Crystal Report from SAP Business One - the printing cut in it width margins

Hi
i'm trying to print crystal report layout from sap b1. when i preview the report as pdf file, i have the option to choose Fit in size option and then the layout print O.k with out any margins that been cut.
The problem start when i'm trying to print the layout directly from sap b1 (printer button) which cause the page to be cut in it width margins.
How can i control the printing of crystal layout when i'm printing it directly from sap b1? do i have the option to chose 'Fit page size' from sap system?

Hi,
Please check SAP note:
1820939 - Page settings of Crystal Reports not transferred
correctly
Thanks & Regards,
Nagarajan

Printing the datas through Crystal Report from Java

How can I Print the datas through Crystal Report from java?

How can I Print the datas through Crystal Report from
java?
What the hell are "the datas"?
Jesus, I can understand this is a shrinking planet, Global community, and all that happy horse pucky. Typos or small grammar errors are no big deal, I make them all the time. But when I have to spend more time interpretting the question than figuring out the answer, it drives me crazy.

Printing Crystal Reports from UDO form

Dear Experts,
I want to open a Crystal report from an addon. I've already found [the following thread|http://forums.sdn.sap.com/thread.jspa?threadID=2039424&start=0&tstart=0] and the [mentioned blog post|http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/26720], and applied the solutions given there, but setting the parameters still does not work.
The report is opened, but the report gives me the message "Input string was not in a correct format", and asks for the parameter. When I enter the parameter, the report shows correctly.
My form is an UDO form loaded from XML, ObjectType set to my UDO. According to the latest answers, this ObjectType setting is the problem.
My code is the following:
Setting the form (the report is already imported into SAP, its DocCode is RCRI0002):
AddOn.Application.LayoutKeyEvent += new SAPbouiCOM._IApplicationEvents_LayoutKeyEventEventHandler(SetPrinter);
SAPbobsCOM.ReportTypesService rptTypeService = (SAPbobsCOM.ReportTypesService)
     AddOn.Company.GetCompanyService().GetBusinessService(SAPbobsCOM.ServiceTypes.ReportTypesService);
SAPbobsCOM.ReportTypeParams rptParams = (SAPbobsCOM.ReportTypeParams)
     rptTypeService.GetDataInterface(SAPbobsCOM.ReportTypesServiceDataInterfaces.rtsReportTypeParams);
rptParams.TypeCode = "RCRI";
SAPbobsCOM.ReportType updateType = rptTypeService.GetReportType(rptParams);
updateType.DefaultReportLayout = "RCRI0002";
rptTypeService.UpdateReportType(updateType);
SboForm.ReportType = "RCRI";
the eventlistener function:
public void SetPrinter(ref SAPbouiCOM.LayoutKeyInfo eventInfo, out bool BubbleEvent)
     BubbleEvent = true;
     if (eventInfo.ReportTemplate == "RCRI" && eventInfo.ReportCode == "RCRI0002")
          eventInfo.LayoutKey = "21"; //Set the key of the layout - hardcoded for testing
I work on version 8.81 PL08
Has anyone found a solution? Is there a solution on higher patch?
Thanks
Andrea

OK, so we returned to this problem, and now I managed to make it work on 8.82 PL11. And now I can't remember anymore how I tried it back then. Maybe I did not use the DocKey@ parameter in the Crystal report.
Anyhow, it looks like it works now.

Calling Crystal Reports from Oracle Forms 6i

Hello
I am trying to invoke/call Crystal Reports from Forms 6i.
I have created OCX Item, while right click on item and insert-object, i am unable to see "Crystal Report" Control.
I have installed crystal Reports 2008 (Version 12) and CR Standard Production version 9.
Is there any Active X control registration in forms.
I could see "Crystal Report Viewer Control 9" and "Crystal Report Print Control 12.0"
Could some one help me,
Thanks
Tumuganti

Did u Succeed in calling crystal Reports XI from Forms 6i
or from Forms10g
for me also the same Requirement
please send any document ,Attachment ,steps to call Crystal Reports XI from Forms
[email protected]
Message was edited by:
user501763

Preview and print a Crystal report prompted for the sa password

Dear All,
Our customer has Crystal report add-on to be installed. When we Preview and print a Crystal report, we got a window prompted for the sa password. Even we type in a correct password, it still says wrong password...
Every time when I open my report in Crystal Basic 2008 on the server, then go database expert >> My connections >> click + in front of the connection name, it asks my sa password. I type in my password then save and close. Next time when I open the report and go my connections, I have to type in my password again. This only happens on one customer.
Any idea? Thanks a lot.
Regards,
Yuka

Hi Yuka,
1) All their SAP client workstation, they have to have use SQL2008 CD and install SQL Client on it
Correct, MS does NOT support MDAC or WDAC when connecting to SQL 2008.
2) Then go ODBC >> SQL Native Client 10.0 >> Create a new connection to SAP server. Should we use sa user or another use that has the same authorization as sa?
Correct again if they are also using ODBC to connect, as for using the sa account or creating a new one is up to you. I suggest creating a Crystal account with what ever rights your app needs, this way if tracing it turned on etc. you can confirm who is actually running the report.
3) Then from MY Crystal report, I have to use ODBC connection as well?
Just to clarify, if you created your reprots using OLE DB then they can do so also. But you need to update your connection properties. Open each report click on Database, Set Location, scroll down to OLE DB and expand and then choose MS SQL Server Native 10 as your OLE DB provider, fill in all the logon info and then verify the database. Do the same for each subreport also.
Save your report and either send them the new one or if you are doing this remotely then replace the original report.
VERIFY your reports to confirm they still return correct data and do work as expected.
Or if you are using ODBC then yes you do select the MS 10 driver with a new DSN. Then do the above to update the reports to all use ODBC as their data sources.
Hope this is all clear now....
Thanks again
Don

Printing the crystal report from a wbe form

Similar Messages

Maybe you are looking for