Printing through a Snow Airport Extreme

We have 2 Macs, a G4 PowerBook (on Leopard) and a MacBook Pro (on Snow Leopard).
We have 2 printers, an HP2605 connected by Ethernet to a 'Snow' base station, and an HP1015 connected by USB to an Airport Express on the network.
Prior to up grading the MBP to Snow Leopard both computers could print to both printers.
Since upgrading the MBP to Snow Leopard the MBP cannot print to the HP1015. Even stranger is that it baulks the PowerBook from printing to it too.
On both computers it shows "Opening printer connection" for ages before timing out.
I reset the Express and it worked fine from the PowerBook - until I tried to print from the MBP again.
Any ideas?

Duane
OK I have tried;
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://tech.ifelix.net/1004.html
When I set up I breeze through it UNTIL I get to
:CREATE NEW PORT" I select the Standard TCP etc then I get the
"Windows won't let you create it as it already exisits"
I get lost when you say
"if you have already created the port in a previous attempt then use the drop down list to select the previous port"
I have no clue what the previous port was ?
Any tips ?

Similar Messages

Attach printer using ethernet on airport extreme

How do I connect a printer via ethernet to airport extreme?

Airport Express is not a TIme Capsule, only ONE Ethernet port on it
Please read the initial post again. The question was....
How do I connect a printer via ethernet to airport extreme?
As you know, the AirPort Extreme has 3 Ethernet LAN ports, as does the Time Capsule.

Epson Stylus r360 issues printing in Leopard via Airport Extreme & Bonjour

I hope I am not duplicating any posts, have searched but have not found a similar problem.
I have an Epson Stylus Photo R360 printer connected to my Airport extreme via USB sharing the resource around the house via Bonjour to all my Mac's.
Problem is it works fine under Tiger but the 2 Mac's that have been upgraded to Leopard 10.5 no longer print. It discovers the printer and loads in the printer configuration window ok, drivers are found and the printer looks good to go.
However, when you try and print, after about a minute an error appears on the printer in Leopard with an exclamation mark and is unable to continue.
If you hook up the printer directly to any Mac running leopard, it works fine!
Anyone else having this problem? Is this something Apple has changed in Bonjour or maybe printer drivers problem via Bonjour?
Any help or advice would be greatly appreciated.
Thanks
G

I found a fix for the problem of not being able to print from a printer connected to an Airport Extreme.
I had similar issues with my Canon iP4200, which was connected to an Airport Extreme. Printing worked fine with Tiger, but Leopard has somehow corrupted the feature. Printing is now very sporadic, at best - and will stop a few seconds into the printing and hang. My solution was to hook the printer directly up to the main (host computer). Go into System Preferences > Sharing, and make sure you've selected 'printer sharing'. Then go into the Sys Pref for "Printing/Fax", and remove your current printer (which was accessed via Bonjour on your Extreme) - you can leave it if you like, just make sure that when you add the new one, that you make it the default. Once set, make sure that you check the box labeled 'Share this Printer'. You will also now notice that the printer's location has changed to your host computer's name. You will now be able to print from your main computer without a hitch. Now access the System Pref>Printer/Fax from any other wired or wireless computer on your network. Add a new printer, a new choice will appear on your list, which will list the printer name with the "@" symbol, followed by your host computer's name. Select that, and let it do it's auto driver check, then click 'add'.
You will now be able to print from any of your computer's on the network. Best of luck.

I am not able to print to my usb airport extreme attached printer from my windows aptop or window desktop

I am not able to print to my usb airport extreme attached printer from my windows aptop or window desktop

Your post did not really provide any details on what you have done in the way of troubleshooting or printer software that you have installed, so we don't have much to go on here.
For starters though, you will not be able to print unless you have installed Bonjour Print Services for Windows v2.0.2 on the PC(s) and run the program.
So, if you have not done this, that would be a good first step.

Can any printer connect to the airport extreme or do i need a special printer?

can any printer connect to the airport extreme or do i need a special printer?

There are rare exceptions but any USB printer should be able to use its USB printer port. Only the print function of all-in-one a/k/a "multifunction" devices will work with the USB port though.
The Extreme will support any networked (wired or wireless) printer or multifunction device.

Is there a difference between AirPrint and printing via usb printer plugged into an airport extreme?

My printer does not show up in the add a printer option on my iMac when plugged into the extreme. I have a HP officejet 5610 All-in-One. I want to be able to print wirelessly using my Airport Extreme. Thank you

Is there a difference between AirPrint and printing via usb printer plugged into an AirPort Exreme?
Big difference.
AirPrint for one will not work via USB, so you will not be able to print from an iOS device like an iPhone or iPad using this type of connection unless you look at additional software....that may or may not allow this option.
Assuming that you get the All-in-One setup using the USB port on the AirPort.......only printing is supported.
You will not be able to use any other advanced features like maintenance, scan, copy, fax, etc when the device is connected to the USB port on an AirPort.
If you plan to use the HP for other things, I would strongly recommend that you connect it to your computer.
My printer does not show up in the add a printer option on my iMac when plugged into the extreme.
This usually indicates that your printer model is not supported. Check with HP Support to see if they have any updated Macintosh drivers for the 5610 that you could download and install that might allow this.
HP Officejet 5610 All-in-One Printer Drivers - Hewlett Packard

Print to PC only Printer from Win Lap. through Mac w/airport extreme?

I've got an airport extreme connected to a mac g4 via ethernet, i can't add the printer i have(a dell 1100) to the mac in the printer utility, does that mean there is no way to print to the printer wirelessly from my PC laptop. I've got the PC to see the network and internet through the base station, but i dont see the printer? The base station finds the printer but will not add it because there is no dell driver in the pull down list, and apparently that printer is not mac compatible.
thanks.

onelane wrote:
but just to clarify, i do have the driver for the XP machine an have printed to the printer directly via usb before,
This is usually a good idea.
i have installed bonjour on the xp machine but it does not see the printer,
Can the Airport Utility (either on the Mac or the PC) see the printer?
there are no drivers or support for the dell printer for the mac as far as i've read. that's why i'm not sure if the xp machine will ever see it while hooked to the airport base, because the mac won't recognize it's there to add to the printer utility?
The fact that there are no Mac drivers are irrelevant, as the Airport Extreme doesn't need drivers and that is what the printer is connected to.
You can remove the Mac (throw it out of the window for example) and you will still be able to use your Airport Extreme.
iFelix

Recognizing a printer attached to an Airport Extreme Base Station

I have attached a printer to the usb port of my airport extreme base station. The printer is recognized by two of my MacBook Pros running Mac OS X version 10.4.11. However, it is not recognized by my latest MacBook Pro running 10.5.2. Is this a problem with the new system, or is there another reason? I have, of course, made sure that the printer drivers are installed, and the printer attached to the Airport works with the new MacBook Pro when connected directly through a usb port on the laptop. Any help will be gratefully received!!

samandlily wrote:
I have something related to this topic going on. I have an Epson printer on my Airport Extreme via a USB. Just recently when I try to print from my iMac, I get a message saying that "the Airport Network is busy, and it will try again in 10-20 seconds". Then nothing happens and the document will not print. Any ideas what is going on?
Please do not pollute the OP's thread by posting here. You are clearly experiencing a different problem - different symptoms, different version of OS X, different printer - and will get much better help if you start your own thread because your problem will get lots more attention that way.
- cfr

Can't print from my printer after upgrading to Airport Extreme

I recently upgraded from the conehead airport to the newest Airport extreme. Now my Epson Artisan 700 wireless capable printer is listed as "offline" by my Macbook pro. I went through Epson support who indicated that my printer isn't WPA2 compatible, so I changed it on my laptop to comply. The printer shows accurate connection information and indicates it is communicating with the airport, but still can't print. The software final installation indicates that there is no ethernet connection from the printer to the router. The cable is connected and is the same one I previously used which worked. So the only changes are 1) new airport, new password which I updated in the printer. 2) updated security from WPA2 to WPA.
Any thoughts?

Open Print & Fax preferences, select the printer and CTRL- or RIGHT-click, then select Reset Printing System from the contextual menu. Then re-add your printer. See if that fixes the problem.

Can't set up a printer to work with airport extreme...

Alright, I've been stuck here for a while.
I have an HP PCS 1310. I can set it up perfectly using a USB cable, but when i try to set it up via Airport Extreme, i can't.
When i try to set it up through airport, the computer doesn't know what drivers to use. It can find the printer, and it'll tell me the name, and the location, but it will ask me to choose what drivers to use. I can't find my printer on the list. I don't really know what to do.
I'm sorry for being so vague...I wish i could post some pictures (and if i can, can someone please explain how?)
Thanks everyone!!

Here is what fixed the printing issues for me:
1) Open up the Airport Utility and determine the IP address of your Airport.
2) Add the printer via System Prefs -> Printers (using Boujour)
3) Then, navigate to http://localhost:631. This will take you to the CUPS setting for the printers.
4) Go to "Manage Printers" on the CUPS setting for your printer.
5) Click on "Modify Printer." It will prompt you for your username and password for the computer (enter your short name that you use to login to your machine and password).
6) Click continue until you get to Device. Change this to AppSocket/HP JetDirect. Click continue.
7) Change to: socket://your_ip:9101
8) Continue on till you get to the end of the Modify Device section.
9) Open up Preferences -> Printers and print a test page.
If this doesn't work, try changing the port to 9102 instead of 9101.

How do I get my macmini running Mountain Lion to see my Canon USB printer connected to my Airport Extreme? I have a macbook pro running leopard and that works fine. The versions of airport utility are different and I can't even see the printer from new 1

I am having trouble seeing my usb printer from my second gen airport extreme using the newest version of airport utility under Mountain Lion. UGH! And while I can see and network to my Canon IP5000 from my macbook pro running leopard, I can't from my new macmini running Mountain Lion. Any help would be appreciated in configuring my macmini so it can see the Canon IP5000 on the airport extreme. Don't want to "share" the printer from the laptop because that would be a cludge. Thanks ahead

I solved this one based on another post. Turned out I needed the snow leopard IP5000 driver. I had just copied over the leopard driver (I had saved my .dmg file) and installed that but it didn't work. So I downloaded the latest driver which turned out to be for snow leopard and I am guessing since it is 64bit that is why it worked and the leopard driver didn't. Anyway, I also had to hook the printer up via usb to the mac mini to get it to work locally before the O/S would see it over Bonjour via the airport extreme.

Which epson wireless printer will work with airport extreme (can not find out from epson)

three systems in use Win 7, Mac lion and vista. Former epson printer WF 600 would not link with my new airport extreme router despite multiple attempts through epson. Does anyone know of a wireless printer that will work? Thanks.

I had the same problem. It was fixed by running the silly app downloadable from their support page: http://support.lexmark.com/perl/support/support.cgi?ccs=229:1:0:0:0:0
Here's another way, through CUPS:
1) http://127.0.0.1:631/
2) Administration tab
3) Add Printer
4) Give Name, Location, and Description (pretty inconsequential)
5) Select device: Internet Printing Protocol (http)
6) Device URL: lexnet3://192.168.5.110:1 (the parts in bold must be there, the ip add is probably different)
7) Make: Lexmark
8) Model: 3600-4600 series (if this isn't there, you need to get the driver from Lexmark)
That should do it.
The printer will be in your system preferences.
The port number and the "lexnet3://" is the interesting part. Without them, I don't think you'll be able to get it working.
Good luck
Message was edited by: swbooth

Canon i550 won't print with MacBook and Airport Extreme

Since we got a new MacBook, we upgraded our Airport Express (b/g) to Airport Extreme (n). Needed tech support from Apple to get the computers on the internet (something about the cable company switching IP addresses), which worked great, but since then the only problem is that I can't print wirelessly from the new MacBook to our Canon i550 printer, which is hooked up by USB to the Airport Extreme. (Ironically, when the internet wasn't working through the Airport Extreme, the one thing that DID work was printing wirelessly.) The other computer, a 2007 MacBook Pro, prints wirelessly with no problems, but I see that under "location" in the print utility it still has "Express" listed (on the MacBook I get the new network name, "Airport Extreme"). I've tried reselecting the printer in Bonjour, reselecting it in AirPort Utility under Printers, turning printer on and off, but no matter what, in the printer status box it just says "Connecting", and never actually prints. I just upgraded to 10.5.6 which still didn't help. Anyone have any thoughts? Thanks.

Welcome to the discussions, Brian!
Please work your way through the Apple Troubleshooting Guide to see if your HP might be compatible with the AirPort Express.
Keep in mind that if your device is compatible, only printing is supported at the USB port on the AirPort Express. So, if you need to scan, copy, fax or check ink levels, etc., you will need to hook the device directly to your computer.

Printing on MBP thru Airport Extreme

I got my MBP and would setup a network printing with Epson AcuLaser C1100 through Airport Extreme Basestation. However, when I start to print, I got "InterfaceType Error = -1". Then, the print job terminated. Could anyone tell me why? Now, I am using Epson printer driver version 3a and I tried other version, but it won't help.
MBP Mac OS X (10.4.7)

All I can say is good luck. I had mine printing through the base station before I reinstalled the OS and now it will not print and I get a similiar message. I have emailed Canon and they are not helping me at all on this. They said something like the printer doesn't support wireless printing. Apple Care kind of said the same thing but was a little less rude about it. So I am going to call Apple Care back and see if they will help me on this. So I would try to call Apple Care and also check the compatibility list too, just to make sure your printer is on the list. Good Luck!
MacBook Pro 2GHz 2GB Mac OS X (10.4.7)

How can I print from ipad2 via airport extreme to hp printer on USB.

Is there a way to get iPad2 to print via airport extreme to a non wireless hp printer?

Apple - iPad - Print right from your iPad with AirPrint.
Unfortunately, AirPrint will only work with AirPrint enabled HP printers.
Check the HP site. They may have an app available you can use for your USB / Airport printer.

Printing through a Snow Airport Extreme

Similar Messages

Maybe you are looking for